Currently, the interconnect path for the debug UART instance
(i.e., qupv3_se7_2uart) is not added, resulting in a NOC error
due to missing QUP voting.
To prevent the NOC error, add the interconnect path for the debug
UART instance.
Fixes: 7cb884c241 ("ARM: dts: msm: Add QUPv3 and GPI DT nodes on tuna")
Change-Id: I6a3829638a244c969d274fe118e51cac7fd0f858
Signed-off-by: Prasanna S <quic_prass@quicinc.com>
This change will add usb-role-switch and eud in Tuna.
Change-Id: Id7bfad4e07aae84a6f1434d35e3519bf693905e4
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
To support cable detection events from UCSI, updates need to be made
to enable usb role switch and setting up a connection to the UCSI PMIC
glink node.
Change-Id: I2e3b6b1c3e36c4dca612df1e79156d669955070d
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
In this change usb_nop has been removed from Tuna RUMI file.
Change-Id: I59992c0f4fde7fbf15b25cc6f8c984b02bd8d283
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Update the following bootargs:
1) Set memhp_default_state to automatically online memory to movable zone
2) Enable memmap_on_memory
3) Align rcu expedited parameters to reduce latency of synchronize_rcu.
Change-Id: I78280accf1ecedbd56378169cb1b0c8af2428ac4
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Updated the IOMMU address from 0x540 to 0x140 for tuna SDC2.
Change-Id: I47e4c2d0abc710ab4048632d2b84552b5d009e8a
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Currently, the interconnect path for the debug UART instance
(i.e., qupv3_se7_2uart) is not added, resulting in a NOC error
due to missing QUP voting.
To prevent the NOC error, add the interconnect path for the debug
UART instance.
Fixes: 7cb884c241 ("ARM: dts: msm: Add QUPv3 and GPI DT nodes on tuna")
Change-Id: I6a3829638a244c969d274fe118e51cac7fd0f858
Signed-off-by: Prasanna S <quic_prass@quicinc.com>
On 6.6 kernel, clock-frequency flag name has been updated to
qcom,pcie-clock-frequency.
Update the clock-frequency dt flag name to qcom,pcie-clock-frequency.
Change-Id: I68c74d3b81ea65d30e7b8a2e8a432ad34d025077
Signed-off-by: Paras Sharma <quic_parass@quicinc.com>
Add charger PMIC changes to the kera variants.
While at it add ADC channels for pmic_glink_adc and
debug channels for pmic_glink_debug for kera platforms.
Change-Id: Iab9f94b44eca9365b84bc78c2666e4f66a344455
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add bob regulator node and update rpmh regulator
voltages as per the latest HW recommendations for kera.
Change-Id: I5e258e01c27f76038f3059315bfaf42f24ea6bdf
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add memory and clock support for qup for ravelin-VM target.
Change-Id: I8b9fb0a2e1f3be9864ddd074aec5d97d9eda4527
Signed-off-by: Prakash Yadachi <quic_pyadachi@quicinc.com>
Add memory enteries for TUI carveout in device tree for parrot.
Change-Id: I62b8c06dece1e5d3311dc8276c92e4e6d894860e
Signed-off-by: Nageswara reddy Karnati <quic_nkarnati@quicinc.com>
(cherry picked from commit 4c18a3a634)
Update S1G min/max & initial voltage for tuna-kiwi platform.
While at it make below changes
1.Disable the unused rails for tuna boards.
2. Update always-on property for L3G for RCM kiwi platform
for FMD feature.
Change-Id: I92e01d48b5c3cb9f64b6aa7be37c0ebb27f378b7
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Remove sys-therm-1 vadc channel as it is handled
in other subsystems.
Change-Id: If80f2f5ffcf0299ad15537189c5ef1337e8ae87e
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add cpufreq cycle counter register information to devicetree in a
separate node.
Change-Id: Ib9c21300cda585d4f25be12cb9527d719eb630ea
Signed-off-by: Atul Pant <quic_atulpant@quicinc.com>
Add the soc specific compatible for tuna7 llcc.
Change-Id: I33c1b2c62ae11c6d65f3c83e379da77f846d20b4
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
