Define adsp mem heap region for adsp-mem device. Also
add documentation for the same.
Change-Id: Icce88b87c28797ff51ba5b0d885706d3a903eee3
Signed-off-by: Anirudh Raghavendra <quic_araghave@quicinc.com>
Add the bindings for the qrtr-mhi driver in YAML.
MHI based qrtr is the transport used for communicating
to external modems.
Change-Id: I31ed0e57955c74d9fa628fe05ed7b9ebbd004b36
Signed-off-by: leihan <quic_leihan@quicinc.com>
Add documentation for memshare driver device tree bindings
aligning to new requirement.
Change-Id: I1da604c4c444044ac4c2dd25037d11900ebe8a79
Signed-off-by: Manoj Prabhu B <quic_bmanoj@quicinc.com>
Qualcomm Technologies, Inc. AMOLED ECM provides a method to measure
OLED display power/current consumption. Add the bindings necessary to
describe it.
This is a snapshot of qcom,amoled-ecm.yaml taken as of qcom-6.1
commit f2d83cefcff8 ("dt-bindings: qcom,amoled-ecm: add
display-panels property").
Change-Id: If2644e7f2a6ee39c7a2c866377012bbb208fd75b
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add bindings for the I2C PMIC Controller. This device handles
interrupts from an I2C PMIC and supports various subnodes which
each correspond to a PMIC peripheral (e.g. LDO regulator, GPIO,
etc).
Change-Id: I83528bd1239f1eb645f17a579216edc616ff2fcd
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Qualcomm Technologies, Inc. (QTI) High Voltage (HV) PMIC haptics
modules can support up to 10 V voltage to drive either ERM or LRA.
It has an integrated module to support auto resonance detection
and correction for LRA actuator. It can play different vibration
effects with different pattern sources. It also has an integrated
brake module which can work in different modes to use BEMF for
quick vibration stop.
This is a snapshot of qcom-hv-haptics.txt as of qcom-6.1 branch
commit 3bb6ba2f4e26 ("bindings: qcom-hv-haptics: add
"qcom,primitive-id" property") which was converted to yaml
format.
Change-Id: I7ef8f804e6acacdedaae7fb2789641779e45d01d
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Flash LED device provides support for the clients to turn ON/OFF LED
channels in different modes (flash/torch) individually or as a group.
Add the bindings necessary to describe it.
This is a snapshot taken as of qcom-6.1 branch
commit b8790c7e1f77 ("dt-bindings: leds: leds-qti-flash: Add
support for external LED setup").
Change-Id: Icbdcb3aa794d999b2edb9995f73b00fe4ccb34d1
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Add the bindings for the QSEE IPC interrupt bridge in YAML.
QSEE IPC interrupt bridge driver can forward remote processor
interrupts to tz.
Change-Id: I1714cfc55422338c0d0674774682ab1f7ac5f4a1
Signed-off-by: leihan <quic_leihan@quicinc.com>
Add the bindings for the smp2p sleepstate driver in YAML.
Smp2p sleepstate driver unset the SMP2P PROC_AWAKE_ID bit if Apps
is going into suspend, set it again when Apps comes out of suspend.
By reading this SMP2P bit, the remote side knows when to avoid
sending data.
Change-Id: I5ad0a431a6c9a40d2a08e9f6a864956b49e0aeab
Signed-off-by: leihan <quic_leihan@quicinc.com>
Add the bindings for the glink_pkt driver in YAML.
Change-Id: I666732ccc56c3067187f65926cf4ec5d5645a9cc
Signed-off-by: leihan <quic_leihan@quicinc.com>
make dt_binding_check outputs the following warning for the file
qcom,stub-regulator.yaml:
Documentation/devicetree/bindings/regulator/
qcom,stub-regulator.example.dtb:
regulator-l1: 'regulator-max-microvolt', 'regulator-min-microvolt',
'regulator-name' do not match any of the regexes: 'pinctrl-[0-9]+'
This occurs because both of these are specified:
* allOf:
- $ref: "regulator.yaml#"
* additionalProperties: false
Fix this warning by switching the latter to:
unevaluatedProperties: false
Change-Id: I5e0c9eb9e6a0638464db5d084bd008df357505d6
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add bindings for regulator proxy consumers which can be used to
enforce minimum voltage, current, and enable state of regulators
when a board is booting up.
Change-Id: I045faf871af168e5ace707f434e0317a176a16fc
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add a bindings documentation file for QTI regulator over-current
(OCP) notifier devices. These devices can be used to monitor and
notifier consumers of regulator OCP and alarm events on certain
Qualcomm Technologies, Inc. PMICs.
A regulator alarm event occurs when the output voltage droops due
to excessive current consumption which is lower than the over-
current protection threshold.
Change-Id: Id86cf62144c6e9f970cd09b7fe7a93ab40ef6cd8
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Modify the fixed-regulator binding to include the compatible
string "qti-regulator-fixed". This is helpful in situations
where proxy consumer voting or debug control features are
needed.
Change-Id: Icf4e6012a0994ff2467ee8a7af036bb97c352fce
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
