This change is to add default and shutdown
pinctrl states for Q2SPI SE.
Change-Id: Ie221501a9a850cc6cb1cf8be2fb84d17579c076d
Signed-off-by: Chandana Kishori Chiluveru <quic_cchiluve@quicinc.com>
This change adds dt-bindings for qcom_cpuss_sleep_stats driver.
Hardware lpm count and residency can be read from this driver.
Change-Id: Ic4ca96b790cde3a988e62dea2331ca80591ffb83
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Swetha Chikkaboraiah <quic_schikk@quicinc.com>
Signed-off-by: Prakash Yadachi <quic_pyadachi@quicinc.com>
Add memshare and glinkpkt nodes to enable the IMS usecase.
Change-Id: Ic2a3a69eb2c77634203b0e42d7181f64a299b177
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Set default Q2SPI clock to 32MHz by using
dt property "q2spi-max-frequency".
Change-Id: I174876a08da50851f538a4cf5fd337e7c21ce76e
Signed-off-by: Chandana Kishori Chiluveru <quic_cchiluve@quicinc.com>
Add multiple output port support for funnel-gfx_dl funnel on sun.
Change-Id: Ie61c07b80efde4d1e445283cc393fd2509095cfb
Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com>
Enforcing access restrictions for eSE secure GPIO
by tagging it as reserved.
Change-Id: Ia525cafe06689708d323ddbc6b65f9ddc4b4647a
Signed-off-by: PRANAY BHARGAV BHAVARAJU <quic_pbhavara@quicinc.com>
3.5mm MTP platform needs to support v8 power grid instead of
v6 power grid.
Change-Id: I60e6396bba3fc17f4ed7e28504f673dad9b706ba
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Change vdd io current level of sdhc_2 to set 22 mA load to follow
up new Power Grid on SDC2 vdd-io pads regulator lpk. The previous
5.6 mA is not able to reflect real drawing current. It may cause
OCP issue as 5.6 mA voting load from SW is not enough to let SDC2
vdd-io regulator work on HPM, but the real drawing current may
exceed LPM OCP threshold.
Change-Id: I3eef0d1269d424341fea5493b467af26c5f203fa
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Although this is already present in CONFIG_CMDLINE in gki_defconfig, it
appears to be being overridden by the commandline specified in devicetree.
Change-Id: If61b4cfd11a15a7c36fb01875b7c77ac7c5bde8b
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Setting dma32_disable causes all memory to be placed in ZONE_NORMAL,
and reduces overhead in page allocation.
Change-Id: I770fe2688081b457a121afd23d6d924423680e5f
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Add 4.5 MB for use by minidump_memory driver.
Add 2 MB for use by memshare IMS usecase.
Change-Id: I5f3897e24dd4b7a1c7bd3f883c4837eaa3ca384a
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Fix the interrupt line for wdog INT to EDGE triggered.
Change-Id: Id9ca3f3a632b95bfa17cedacda0936845413ded1
Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
qcom,ramoops driver takes memory dynamically
available from a given range and give it to
ramoops for its usage.
Change-Id: I94ece0f9d25719e240ecb5c7f47a3b1fe83fbab1
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Loadable section memory of FingerPrint(FP) Sensor TA
has to be increased which requires increase in qseecom_ta mem.
Change-Id: Ie0a31662cd7b05f3aff0a41c275089ed7684d8b0
Signed-off-by: Akhil Budampati <quic_abudampa@quicinc.com>
Add the list of PCIe SM registers that need to be dumped
to the PCIe dt node in sun.
Change-Id: Ic2e0518ac611ef5e409f88dcd0f69eb2ce4d8566
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
