-Add cdc_dmic_gpio's in kera overlay dtsi.
-As part dmic event, msm pinctrl state is checked, The node should
already be parsed and cached during machine probe.
Change-Id: I2cdd410274df99d463a2ba01d00f315754fd831f
Signed-off-by: Kisan Yadav <quic_kisany@quicinc.com>
Fsa node was missing in qrd dts. raise this
change to add the fsa node for qrd
Change-Id: I1093c5a925c60d187d902ebf3b70291ac21cf18c
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
- As in IPCAT there is a conflicting info about
PIN configuration, Corrected as per discussion
with IPS.
- Removal of I2S0_DATA1 pin, as GPIO_63 is not
used internally for I2S purpose and it is being
used by other subsystem.
Change-Id: Ie1788565e7a4f47a167108de2e3ada3ac099da7e
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Correct the config of tx_swr_data0, the bias type
should be same with tx_swr_data1.
Change-Id: Id871ed15c0bf21ab68c4d3341f2761e451a9aa03
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Correct wsa channel of kera qrd. it should
be left channel.
Change-Id: I8b784e77b2db45963d0e27a47a51fc145febb52b
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
In LL use-case GPR callback thread was in unable state.
In normal thread and not in RT thread.
Which causes pop noise issue.
It needs to set glink-adsp_apps thread priority to be RT.
This Configuration enables Client to set the configuration thread
to be in RT.
Change-Id: I2e25ad8755d48a8b4869360a7abe0249dd21ccf0
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Update correct wcd codec for kera qmp and its mic bias.
Change-Id: I5c584401ff747f5ad801b93c0124eb00d1bc6965
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Update GIC as per IPCAT the GIC number is incorrect.
722 will not get interrupts of HSJ and audio will be mute.
Changing this to 721 as in tuna same issue was observing.
correction of wrong gpio pin.
Change-Id: Idb87af4d1438186ed29fc3227d447f1b6d189676
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Replace swr node with default as swr core does not detect.
Change-Id: Ibe40453c70867c9687bd01ca9345dae8080bafac
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
This change reverts the commented section of BOB and
wcd_usbss as they are depended on kernel change.
Change-Id: I9fad7ce9732d7ec776ee3f14142129e406398c0f
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Set qcom,wcn-bt flag to 1 to enable BTFM related dailinks.
Change-Id: Iba9adc538fcc0f5464a85f6099779993dfa881b2
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
-Disable swr haptics for qrd.
Change the wsa-codec index from 2 to 1.
and connect WSA_SPK1 OUT instead of WSA_SPK2 OUT
change the prefix of wsa as SpkrLeft.
Change-Id: I99ac02d92326641432011a8fe88c41dd52d03f3b
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
- Remove amic5 entries from tuna overlay as only 4 mics are supported in
tuna wcd codecs
Change-Id: I0d3159a67c288f4ee61613ec291c274a8c2325a1
Signed-off-by: Kisan Yadav <quic_kisany@quicinc.com>
Need to revert once kernel changes are in place.
Change-Id: I96caf7ca9b78421b9c25b6ddc5ef6fd2a71b9d9a
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
-Add and update MSM_ID for tuna7.
-Add Board_Id for tuna7.
-Add AATC support for tuna7 platform.
Change-Id: I7f470c0150ec95b556087ab6797787b9754e8464
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Update the bcs signal port for Tuna,
the bcs is on DP4 CH3.
Change-Id: Icaf2239a0da5f332124a726db0edde05aa67bb1e
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
