Add proxy enable properties to the DSI core and panel supplies
to support continuous splash for Kera.
Change-Id: Iac767f1f9fd51159ec9650370ab7caa0a6e695a5
Signed-off-by: Abhinav Saurabh <quic_abhisaur@quicinc.com>
Kera IoT platform required pcie_1 clocks support. Add support
to model pcie_1 clocks and gdsc's for Kera IoT devices.
Change-Id: I5ada397442568c9e91b099e8cb4ea5234fb4b76e
Signed-off-by: Smeet Raj <quic_smeeraj@quicinc.com>
eUSB2 HPG revision 1.0.2 recommends to program eusb register
USB_PHY_CFG_CTRL_1 to be programmed to 0x00 on phy init.
Since this divergence is only applicable for specific version therefore
updating the override sequence with the appropriate value.
Change-Id: Iaf84875c20e9c2c030b3f81eec9348a63f081105
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Disable sys-therm-11 node for kera as it is not required in kera
platforms.
While at it disable amoled-ecm for pmiv0102 kera platforms.
Change-Id: Iadc6ef3fdddfc32789540e829f96d938f3fa2cd8
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Fix (4082b0db ARM: dts: msm: Update stdout-path with serial0 alias)
to re-enable (09b0fdef ARM: dts: msm: update kernel bootargs for kera).
While at it align the same bootargs on rumi files.
Change-Id: I032af3b9ea9a78418ef7360fc5d8b94885c6a8e6
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
Signed-off-by: Vishvanath Singh <quic_vishvana@quicinc.com>
Add compatible string to schgm-flash DT node. This was removed
from the bulk DT porting for Ravelin on qcom-6.6 device-tree branch.
Change-Id: I16d410ce8cc15278b0d8a3480a1e7fd5a044669f
Signed-off-by: Shilpa Suresh <quic_c_sbsure@quicinc.com>
This change will add usb-role-switch and eud in Kera.
Change-Id: I74ca8c0e19b45d925bcecc78e993439441339e20
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
To support cable detection events from UCSI, updates need to be made
to enable usb role switch and setting up a connection to the UCSI PMIC
glink node.
Change-Id: Ic3a848f882072a766b3efb872f943dd3f4220ba1
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
DWC3 host and XHCI plat now communicates the maximum number of interrupters
the XHCI HCD will allocate. Since platforms only require a limited number
of interrupters (i.e. 3) make sure XHCI doesn't allocate more than is
required.
Change-Id: I466748df07aba6d7bdc79c7b2b17b3a57c58d3d4
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
During Airplane mode testing with BT, UWB and PCIE concurrent
test scenarios, due to pcie traffic signal tolerance issue seen
on q2spi signals. As per the recommendation from design team
decreasing current drive strength from 6mA to 4mA for q2spi
active state GPIO configuration.
Change-Id: I530dfd636e834c4d6eb1e067e8dcb76dcfa4ab87
Signed-off-by: Chandana Kishori Chiluveru <quic_cchiluve@quicinc.com>
