This change adds wlan related dtsi file for volcano
which has disabled icnss and wpss dtsi node enabled.
Change-Id: I5da7d1544607dd57e66b76f6925b424953ec8a3c
CRs-Fixed: 3742633
Add Ravelin adrastea dtsi from kernel devicetree to vendor
wlan-devicetree and corresponding dts files as part of new
wlan teckpack for kernel-6.6 upgrade.
Change-Id: Id47260ae0c74b76270bb9bdfba9a16cb7ed74aae
Add board ID in WLAN peach V8 DTS file to enable WLAN support
for ATP devices which has V8 power grid and peach as WLAN
attachment.
Change-Id: I9cbef8b9d04086b63214d11087bede805ffbf01a
CRs-Fixed: 3862456
Add board ID in WLAN kiwi V8 DTS file to enable WLAN support
for devices which has 3.5mm audio jack, V8 power grid and Kiwi as
WLAN attachment.
Change-Id: I2770a311aa0466d83bde1b57049e36d6048ad2bc
CRs-Fixed: 3855213
Enlarge the range of DMA memory pool for hamilton attachment
in pakala v8 module.
Change-Id: I497ef2bfa6e65799c1f25e08103dcb14ea5d69d3
CRs-Fixed: 3848940
Add changes to parrot66 qca6750/qca6755 dt files to have separate
model name and remove moselle plus subtype from it.
Change-Id: I873794d4da9016d4b586f9c2b2d7a6d7d9c04739
Add dtsi entry to configure cpu mask for wlan rx and tx completion
interrupt affinity.
Change-Id: I3930e401df2e37818405accadb8d5449bc16b5b7
CRs-Fixed: 3837616
Add wcn6750 and wcn3990 parrot dtsi from kernel devicetree to vendor
wlan-devicetree and corresponding dts files as part of new wlan teckpack
for kernel-6.6 upgrade.
Change-Id: I9a48a0731209216800151f21a46727a033cf62cb
Add package ID to msm-IDs for sun hdk SoC to support different
hardware settings for WLAN.
Change-Id: I9a93cdb4144fd66ebc51e3683f5ebbe32458b033
CRs-Fixed: 3798698
Add wlan support for SunP HDK.
Add new board major/minor device id.
Remove vdd-wlan-ant-share-supply since no modem in HDK.
Change-Id: I7f5a74bcce67b40653e9ca2cc37c13589533065b
CRs-Fixed: 3755710
Currently the WLAN SNOC voting is set based on
PCIe SN4 BCM width as 16.The PCIe port width has been
updated to 8 for sun devices. Hence, this change will
bring in the corresponding WLAN SNOC voting to support
the new width.
Change-Id: I6129bff9067d9654b7eb08777bb19d5a9e05c450
CRs-Fixed: 3775975
MTP with 3.5mm support has specific major version in board ID.
Add that board ID in WLAN Peach V8 DTS file to enable WLAN support
for devices which has 3.5mm audio jack, V8 power grid and Peach as
WLAN attachment.
Change-Id: Id5ae07b7e560cc7997bd133bff6bc32a637900bb
CRs-Fixed: 3759656
Add the interconnect voting node for sun kiwi/peach, used
for bus bandwidth voting.
Change-Id: I623ab5c0e3def9c0a357713867564b6a2db55107
CRs-Fixed: 3736681
Upstream Linux kernel has added a new devicetree property
"iommu-addresses", to replace "qcom,iommu-dma-addr-pool".
The new property defines the address range the device
cannot use, in contrast to the older property which
defines the address range the device can use.
Change-Id: I73166b20ff8ef0415cfa56e649b4792f03c94cad
CRs-Fixed: 3732156
Remove APPS vote for all the regulators except S5F(WLAN CX)
after FW_READY during device bootup with V8 board.
Change-Id: Ic9510af45b7f637e5900d03be041cc66e4351bb6
CRs-Fixed: 3731688
Having S4J enabled in the TCS by default will cause TCS address
to be populated with the wrong address on V8 and will cause TCS
ACK hang. Thus, AOP will keep S4J and S5F regulators disabled
by default and host will vote to enable S4J and S5F regulators
based on V6 or V8 power grid, respectively.
Change-Id: I852ca4aa80ef0e6bd5c802e6032f876fb53c9670
CRs-Fixed: 3709995
DEV_SOL GPIO is side-band GPIO from discrete WLAN chip to
APPS. Default setting for DEV_SOL has to be done by WLAN_FW
in WLAN chip. Remove default GPIO configuration from CNSS
driver running in APPS.
Change-Id: I10a65bd007a6bcf00a358f1e60c925ad316ec3ab
CRs-Fixed: 3727394
