Qualcomm Technologies, Inc. AMOLED ECM provides a method to measure
OLED display power/current consumption. Add the bindings necessary to
describe it.
This is a snapshot of qcom,amoled-ecm.yaml taken as of qcom-6.1
commit f2d83cefcff8 ("dt-bindings: qcom,amoled-ecm: add
display-panels property").
Change-Id: If2644e7f2a6ee39c7a2c866377012bbb208fd75b
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add bindings for the I2C PMIC Controller. This device handles
interrupts from an I2C PMIC and supports various subnodes which
each correspond to a PMIC peripheral (e.g. LDO regulator, GPIO,
etc).
Change-Id: I83528bd1239f1eb645f17a579216edc616ff2fcd
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Remove the usb-role-switch property for pineapple target.
USB SW driver will assume that the USB cable is connected and
enumerate w/the PC.
Change-Id: I6f2f1b292792bc064722fdeff3807ea4c3fa5a53
Signed-off-by: Bruce Levy <quic_blevy@quicinc.com>
Qualcomm Technologies, Inc. (QTI) High Voltage (HV) PMIC haptics
modules can support up to 10 V voltage to drive either ERM or LRA.
It has an integrated module to support auto resonance detection
and correction for LRA actuator. It can play different vibration
effects with different pattern sources. It also has an integrated
brake module which can work in different modes to use BEMF for
quick vibration stop.
This is a snapshot of qcom-hv-haptics.txt as of qcom-6.1 branch
commit 3bb6ba2f4e26 ("bindings: qcom-hv-haptics: add
"qcom,primitive-id" property") which was converted to yaml
format.
Change-Id: I7ef8f804e6acacdedaae7fb2789641779e45d01d
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Flash LED compatible string has been updated from "qcom,pm8350c-flash-led"
to "qcom,qti-pm8350c-flash-led" in Sun. Update existing usage of the
old compatible from Pineapple dtsi files found in Sun.
Change-Id: Ib062510cd6561e57973cca336d2a5b04884ec5d8
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Flash LED device provides support for the clients to turn ON/OFF LED
channels in different modes (flash/torch) individually or as a group.
Add the bindings necessary to describe it.
This is a snapshot taken as of qcom-6.1 branch
commit b8790c7e1f77 ("dt-bindings: leds: leds-qti-flash: Add
support for external LED setup").
Change-Id: Icbdcb3aa794d999b2edb9995f73b00fe4ccb34d1
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Add the bindings for the glink_pkt driver in YAML.
Change-Id: I666732ccc56c3067187f65926cf4ec5d5645a9cc
Signed-off-by: leihan <quic_leihan@quicinc.com>
Update memory map to V6, from a baseline of V4.
Change-Id: I167de96b3a2f199188a4d8c995aa49ef6b83fee1
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
make dt_binding_check outputs the following warning for the file
qcom,stub-regulator.yaml:
Documentation/devicetree/bindings/regulator/
qcom,stub-regulator.example.dtb:
regulator-l1: 'regulator-max-microvolt', 'regulator-min-microvolt',
'regulator-name' do not match any of the regexes: 'pinctrl-[0-9]+'
This occurs because both of these are specified:
* allOf:
- $ref: "regulator.yaml#"
* additionalProperties: false
Fix this warning by switching the latter to:
unevaluatedProperties: false
Change-Id: I5e0c9eb9e6a0638464db5d084bd008df357505d6
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add bindings for regulator proxy consumers which can be used to
enforce minimum voltage, current, and enable state of regulators
when a board is booting up.
Change-Id: I045faf871af168e5ace707f434e0317a176a16fc
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add a bindings documentation file for QTI regulator over-current
(OCP) notifier devices. These devices can be used to monitor and
notifier consumers of regulator OCP and alarm events on certain
Qualcomm Technologies, Inc. PMICs.
A regulator alarm event occurs when the output voltage droops due
to excessive current consumption which is lower than the over-
current protection threshold.
Change-Id: Id86cf62144c6e9f970cd09b7fe7a93ab40ef6cd8
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Modify the fixed-regulator binding to include the compatible
string "qti-regulator-fixed". This is helpful in situations
where proxy consumer voting or debug control features are
needed.
Change-Id: Icf4e6012a0994ff2467ee8a7af036bb97c352fce
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
