Add 30000 uA load for L2G/L3G regulator voting during
boot up before WLAN HW is brought out of reset.
Change-Id: Iff34b9cd735d42d8ee1c8bd5eee0bcd534fc3aee
CRs-Fixed: 4040675
Add support to set function to "wcn_sw_ctrl" & set
mpm_wake_set for SW_CTRL GPIO so that, when this
GPIO goes high, PDC get interrupted and TCS sequence
(which enables RF_CLK) can be started.
Change-Id: Ifdff31f6ad6286a32c3a6f8b500cb6b55b97eb42
CRs-Fixed: 4020424
Remove board-id for Pictor from Canoe dts file, as WLAN is not supported
on Pictor.
Change-Id: I106a0ec65b6856758c4c27e823c8099e94737122
CRs-Fixed: 4018051
Current WLAN DDR voting is not sufficient to meet the required
throughputs in legacy connection. Increase the DDR vote to meet
legacy throughputs.
CRs-Fixed: 4011534
Change-Id: I5153b0b50c15aeacf9776b6ca63b912fbc06cc07
Add config to enable regulator to PDC mapping and PMU
to regulator mapping for tuna kiwi.
Change-Id: I6f12521a895aae551400d5a426576e229d9c31e3
CRs-Fixed: 4010931
Add config to enable regulator to PDC mapping and PMU
to regulator mapping for canoe kiwi devicetree.
Change-Id: I72dba4f6de2788aeb4860d35c83ae8540e6a9076
CRs-Fixed: 3998205
Currently the WLAN SNOC voting is set based on
PCIe SN4 BCM width as 16.The PCIe port width has been
updated to 8 for tuna. Hence, this change will
bring in the corresponding WLAN SNOC voting to support
the new width.
Also, update the DDR voting accordingly.
CRs-Fixed: 3999629
Change-Id: Iff5b87616f1f340257096826906ca77bdba4ce29
Add direct-link device node support for canoe. This device
node is used to program SID configuration by iommu driver.
This device shares the iommu domain with normal wlan device.
Change-Id: Ia54f3cea8b1bec4b9765413e562192ba22269b57
CRs-Fixed: 4001977
Add direct link node dtsi entry, this shares iommu
domain with wlan device will be used in direct link
use case.
Change-Id: I9660bac1028087be02611ab7b9d16a09e3ad1323
CRs-Fixed: 4000587
This change updates the regulator config and
pdc init table in kera dtsi files.
Change-Id: I74140414c061ffe16b41a1f40ad67cf5f3aabe65
CRs-Fixed: 4000320
Update regulator voting and add pdc cmd as per
latest tcs sheet for canoe kiwi.
Change-Id: Ideb2393238417f7f651d4585aa4f44d2260a4fb5
CRs-Fixed: 3992528
Add L3K regulator support and change pcie0_rp to pcie_rp. In addition,
enable canoe dtsi compilation.
Change-Id: I2771e43d559c5ae67d5fad04b45eac7060c94d72
CRs-Fixed: 3986494
This change updates the regulator config and
pdc init table in kera dtsi files.
Change-Id: I766d26f4505d4da717ca63e2b1bfd64de14bb79e
CRs-Fixed: 3988811
Add support for direct-link device tree node, this
device will be used for configuring LPASS SID iommu
bank in direct-link use case.
Change-Id: I31ce562bd8cbdd4692d6c721325fc15627a3f624
CRs-Fixed: 3990401
Add direct link dt node for tuna, this device will
be used in direct-link use case and required for
SID configuration and sharing IOMMU bank with
wlan platform device.
Change-Id: Ie8cff03866fe9f514f160ed02d0ddc72c4dc5b5d
CRs-Fixed: 3992469
AON and Digital supply regulator needs to be always voted if
wlan is on, so remove need_unvote bit for S1K and S1L for
volcano IOT (Brahma) target.
Change-Id: I156a8e7c7dcbeecbfd8c27bf0cb738b6e0b9300b
CRs-Fixed: 3984342
According to latest CDT updates, major version no. is being
used to differentiate between different boards instead of subtype.
Hence update board-ids to reflect these new CDTs.
Change-Id: Ia5440ebafe4c272a9df3b8e89aa02e1b8bce2347
CRs-Fixed: 3967186
