Add PMIC Glink ADC channel nodes for Sun MTP and QRD boards.
This exposes an interface for software to read PMIC charger ADC
channels for input current, charge current, and die temperature.
This is useful for PMICs connected via I2C which are only
accessible to charger firmware.
Change-Id: Ie8a9a0690b9937f9c0c541123c28e544ba3495ec
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
When the dt-bindings Makefile searches for schema files, it uses "find"
to search for yaml files. Find does not travese past symlinks, but
bindings is a symlink to the devicetree project. Force traversal by
adding trailing slash so that the root directory is past the symlink.
Change-Id: I9575b3b9e00725c5e1bcaccf99070d71994a9f77
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
DT_SCHEMA_FILES used to allow specifying a space separated list of file
paths, but the introduction of partial matches support broke this
feature:
$ make dtbs_check DT_SCHEMA_FILES="path/to/schema1.yaml path/to/schema2.yaml"
[...]
LINT Documentation/devicetree/bindings
usage: yamllint [-h] [-] [-c CONFIG_FILE | -d CONFIG_DATA] [--list-files] [...]
[-v]
[FILE_OR_DIR ...]
yamllint: error: one of the arguments FILE_OR_DIR - is required
[...]
Restore the lost functionality by preparing a grep filter that is able
to handle multiple search patterns.
Additionally, as suggested by Rob, use ':' instead of ' ' as the
patterns separator char. Hence, the command above becomes:
$ make dtbs_check DT_SCHEMA_FILES="path/to/schema1.yaml:path/to/schema2.yaml"
Fixes: 309d955985ee ("dt-bindings: kbuild: Support partial matches with DT_SCHEMA_FILES")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230209193735.795288-1-cristian.ciocaltea@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Git-Repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Git-Commit: 25eba1598c8e1e804c02e3a0da50782c50c11c41
Change-Id: I8bf8eaf06c3271c7b525c3c638477a2a23efb46f
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Disable software DRV (L1SS sleep) with PCIe instance
on sun platform as ADSP subsystem (software DRV component)
doesn't support this functionality.
Only CESTA based hardware DRV is supported.
Change-Id: I75368fab37e8bcaaa3c65320b6fdd37e023d3297
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
This driver responds to a kernel panic event on PVM
by sending doorbell to notify TUIVM.
Change-Id: I5cbc644a9978e290b44e61f2c8fa747d1ddfc276
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Dmesg dumper transfer QTI VM encrypted dmesg to PVM by dumping
the dmesg log buffer to a reserved memory location.
Change-Id: I3585f820e9dfe3f0011e210e4d6f1297734c47c3
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
These clock phandles are necessary to ensure the clock devices probe
before debugcc. Debugcc needs its parent clock devices to probe first,
otherwise it'll invalidate their associated mux_sels during
clk_debug_mux_init() and they can't be measured.
Change-Id: I30d1a9e24ae1ac5a9efc7d8f8e0740ebdce8e1b0
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Add the missing phy gdsc node in the pcie dt node for sun.
Change-Id: I0257c6123d4d3e8fe2740569bd4def68fa3c92a8
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Add PMIC Glink devices and their client devices. The PMIC Glink
device with name PMIC_RTR_ADSP_APPS supports the clients: ucsi,
altmode, and battery_charger. The PMIC Glink device with name
PMIC_LOGS_ADSP_APPS supports the clients: battery_debug,
pmic_glink_debug, charger_ulog_glink, and glink_adc.
Change-Id: Ib5a15c136c77c8368d4a561f266a1588c4649893
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Describe the communication channel used to communicate with the
firmware which supports onlining and offlining of memory.
Keep the device in a disabled state for now until a conflict
between THP and memory-hotplug features can be resolved.
Change-Id: I3d74d9d3d58d379b2a91ee976a72dddfb7a221c6
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
PMIC5 GEN3 ADC has support for clients to read voltage and
current on supported channels connected to the PMIC.
Clients include reading voltage phone power and on board system
thermistors for thermal management. ADCs on certain PMICs have
support to read battery current.
Change-Id: Ief7cbdf77d227ba2cb4ef7919aa66d9962d98e37
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
[quic_amelende@quicinc.com: Converted binding change from .txt to .yaml]
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Add ufs support for mtp/cdp/qrd sun platforms.
Enable ufs's smmu fastmap attribute.
Enable ufs host and device resets.
Change-Id: I7e4194a48c022284308c3debd6e18be40289693b
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Add nodes to enable qcom dcvs, bwmon and memlat
on sun.
Change-Id: I515aa98f01b29fb51be11db33930f96193d13401
Signed-off-by: Amir Vajid <quic_avajid@quicinc.com>
Add nodes to enable scmi communication to cpucp on sun.
Change-Id: I574949e32e397047701f836d54115f56414ea023
Signed-off-by: Amir Vajid <quic_avajid@quicinc.com>
Add carved-out memory region used for hw-fencing on sun target.
Change-Id: I0aaba5a8a55de2e5b625667973841d90f3f9de3a
Signed-off-by: Grace An <quic_gracan@quicinc.com>
Describe the available dma-buf memory pools on sun-vm.
Change-Id: I205b826849f36078d05a92492238d80a884aa65a
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Describe the register, interrupts, and settings of the arm-smmu device.
Change-Id: I0ca4c90e2f767ed6240dd6ad6fc6cc8e7f6c278d
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
This change adds system low power violators device node.
Change-Id: Ie4b7923c2ef96d6d762275b7241948e120230163
Signed-off-by: Minghao Zhang <quic_minghao@quicinc.com>
Snapshot the sys-pm-violators documentation from
qcom-6.1 'commit <16ac1827ff37> ("bindings: arm: msm:
Add sys-pm-violators bindings for monaco_au")'.
Updates:
- Add entry to support for sun.
Change-Id: I1a8cd4652b6680ff4b87199a6fc22b1ddbcd9614
Signed-off-by: Minghao Zhang <quic_minghao@quicinc.com>
Add initial device trees to support Sun QRD sku1 and sku2 SoC
and it's platforms.
Change-Id: Ibf28cbc9f33f19908c4d8ac1b431d17632c43e6b
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Remove fixed-factor-clock and enable device node for rpmh
clocks under apps_rsc in place of fixed clocks.
Change-Id: I9c4d242882f29f616574e339581722b65f27a74f
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add RPMH_CXO_CLK as ref_clk to UFS for Sun on pre-sil.
On Rumi ref_clk is to UFS PHY is 19.2MHz and actual device
it is 38.4MHz.
Also update correct gcc header file for sun.
Change-Id: I78ed60095e5229405e7962f4676bfab7b7556676
Signed-off-by: Vivek Aknurwar <quic_viveka@quicinc.com>
Describe the properties of the memory region virtio-mem supports.
Change-Id: Ifdc420d25c4fcf1acc93ccd82a80c89857b3c427
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Describe the message queues and capabilities of the mem-buf device.
Change-Id: I9ff137c3cfee8d5f9e56930bf8ca9a81066e0150
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
