dt-bindings: regulator: Add bindings for PM8008 device
Add bindings for PM8008 devices.
This snapshot is taken from qclinux.1.0 branch commit 93af7f1c6008a
("QCLINUX: arm64: dts: qcom: Add bindings for qcom-i2c-pmic and PM8008
devices").
Change-Id: I8b1e88426bfe7f77c276922df8756be450237f77
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Signed-off-by: Varshitha H N <quic_vhn@quicinc.com>
This commit is contained in:
Jishnu Prakash
committed by
Varshitha H N
Varshitha H N
parent
ffaaff8ce0
commit
bb1bd0a9ff
67
bindings/regulator/qcom,pm8008-chip.yaml
Normal file
67
bindings/regulator/qcom,pm8008-chip.yaml
Normal file
@@ -0,0 +1,67 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/regulator/qcom,pm8008-chip.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm Technologies, Inc. PM8008 Regulator's top-level chip
|
||||
|
||||
maintainers:
|
||||
- Umang Chheda <quic_uchheda@quicinc.com>
|
||||
|
||||
description: |
|
||||
PM8008 is an I2C based PMIC regulator chip.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: qcom,pm8008-chip
|
||||
|
||||
reg:
|
||||
description:
|
||||
Base address of the device.
|
||||
|
||||
maxItems: 1
|
||||
|
||||
patternProperties:
|
||||
"^qcom,pm8008-chip-en+$":
|
||||
type: object
|
||||
$ref: /schemas/regulator/regulator.yaml#
|
||||
|
||||
description: |
|
||||
Chip enable regulator device to control chip enable functionality.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
i2c1 {
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pm8008i_chip: pm8008i@8 {
|
||||
compatible = "qcom,i2c-pmic";
|
||||
reg = <0x8>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pm8008i_active>;
|
||||
|
||||
pm8008-chip@900 {
|
||||
compatible = "qcom,pm8008-chip";
|
||||
reg = <0x900>;
|
||||
|
||||
PM8008I_EN: qcom,pm8008-chip-en {
|
||||
regulator-name = "pm8008i-chip-en";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
185
bindings/regulator/qcom,pm8008-regulator.yaml
Normal file
185
bindings/regulator/qcom,pm8008-regulator.yaml
Normal file
@@ -0,0 +1,185 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/regulator/qcom,pm8008-regulator.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm Technologies, Inc. PM8008 Regulator
|
||||
|
||||
maintainers:
|
||||
- Umang Chheda <quic_uchheda@quicinc.com>
|
||||
|
||||
description: |
|
||||
PM8008 chips contain 7 LDO regulators along with a top-level chip sleep feature.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,pm8008-regulator
|
||||
- qcom,pm8010-regulator
|
||||
|
||||
'#address-cells':
|
||||
const: 1
|
||||
|
||||
'#size-cells':
|
||||
const: 0
|
||||
|
||||
pm8008_en-supply:
|
||||
description:
|
||||
Reference to PM8008 chip enable regulator, which manages
|
||||
chip enable functionlity of PM8008.
|
||||
|
||||
vdd_l1_l2-supply:
|
||||
description:
|
||||
Parent supply for LDO1/LDO2 of PM8008.
|
||||
|
||||
vdd_l3_l4-supply:
|
||||
description:
|
||||
Parent supply for LDO3/LDO4 of PM8008.
|
||||
|
||||
vdd_l5-supply:
|
||||
description:
|
||||
Parent supply for LDO5 of PM8008.
|
||||
|
||||
vdd_l6-supply:
|
||||
description:
|
||||
Parent supply for LDO6 of PM8008.
|
||||
|
||||
vdd_l7-supply:
|
||||
description:
|
||||
Parent supply for LDO7 of PM8008.
|
||||
|
||||
patternProperties:
|
||||
"^regulator@[0-9a-f]+$":
|
||||
type: object
|
||||
$ref: /schemas/regulator/regulator.yaml#
|
||||
|
||||
description: |
|
||||
Individual regulator devices under PM8008 chip.
|
||||
|
||||
properties:
|
||||
reg:
|
||||
maxItems: 1
|
||||
description: |
|
||||
Base address of individual LDO.
|
||||
|
||||
qcom,hpm-min-load:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
Load current in uA which corresponds to the minimum load
|
||||
which requires the regulator to be in high power mode.
|
||||
|
||||
qcom,min-dropout-voltage:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
Specifies the minimum voltage in microvolts that the parent
|
||||
supply regulator must output above the output of this
|
||||
regulator. It is only meaningful if the corresponding parent
|
||||
supply property has been specified in the first level node.
|
||||
|
||||
qcom,init-voltage:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
Specifies the initial voltage in microvolts to for a regulator.
|
||||
|
||||
required:
|
||||
- reg
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- pm8008_en-supply
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
i2c1 {
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pm8008i_ldo: pm8008i@9 {
|
||||
compatible = "qcom,i2c-pmic";
|
||||
reg = <0x9>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
||||
qcom,pm8008i-regulator {
|
||||
compatible = "qcom,pm8008-regulator";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pm8008_en-supply = <&PM8008I_EN>;
|
||||
vdd_l1_l2-supply = <&vreg_s8b_1p2>;
|
||||
vdd_l3_l4-supply = <&vreg_bob>;
|
||||
vdd_l5-supply = <&vreg_s1b_1p8>;
|
||||
vdd_l6-supply = <&vreg_bob>;
|
||||
vdd_l7-supply = <&vreg_bob>;
|
||||
|
||||
|
||||
L1I: pm8008i_l1: regulator@4000 {
|
||||
reg = <0x4000>;
|
||||
regulator-name = "pm8008i_l1";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
qcom,min-dropout-voltage = <160000>;
|
||||
qcom,hpm-min-load = <30000>;
|
||||
};
|
||||
|
||||
L2I: pm8008i_l2: regulator@4100 {
|
||||
reg = <0x4100>;
|
||||
regulator-name = "pm8008i_l2";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
qcom,min-dropout-voltage = <128000>;
|
||||
qcom,hpm-min-load = <30000>;
|
||||
};
|
||||
|
||||
L3I: pm8008i_l3: regulator@4200 {
|
||||
reg = <0x4200>;
|
||||
regulator-name = "pm8008i_l3";
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
qcom,min-dropout-voltage = <144000>;
|
||||
};
|
||||
|
||||
L4I: pm8008i_l4: regulator@4300 {
|
||||
reg = <0x4300>;
|
||||
regulator-name = "pm8008i_l4";
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
qcom,min-dropout-voltage = <128000>;
|
||||
};
|
||||
|
||||
L5I: pm8008i_l5: regulator@4400 {
|
||||
reg = <0x4400>;
|
||||
regulator-name = "pm8008i_l5";
|
||||
regulator-min-microvolt = <1700000>;
|
||||
regulator-max-microvolt = <1900000>;
|
||||
qcom,min-dropout-voltage = <136000>;
|
||||
};
|
||||
|
||||
L6I: pm8008i_l6: regulator@4500 {
|
||||
reg = <0x4500>;
|
||||
regulator-name = "pm8008i_l6";
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
qcom,min-dropout-voltage = <128000>;
|
||||
};
|
||||
|
||||
L7I: pm8008i_l7: regulator@4600 {
|
||||
reg = <0x4600>;
|
||||
regulator-name = "pm8008i_l7";
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
qcom,min-dropout-voltage = <312000>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
Reference in New Issue
Block a user