ARM: dts: msm: Add trustedvm camera item support
Add standalone files for trustedvm camera config and dts configuration. CRs-Fixed: 3494729 Change-Id: I96eff41b7555b9b88769860d4d176f927154a78d Signed-off-by: chengxue <quic_chengxue@quicinc.com>
This commit is contained in:
chengxue
committed by
Camera Software Integration
Camera Software Integration
parent
81de41a7ee
commit
92c283726a
3
config/pineapple_tuivm.mk
Normal file
3
config/pineapple_tuivm.mk
Normal file
@@ -0,0 +1,3 @@
|
||||
dtbo-$(CONFIG_ARCH_PINEAPPLE) := trustedvm-pineapple-camera-sensor-mtp.dtbo \
|
||||
trustedvm-pineapple-camera-sensor-cdp.dtbo \
|
||||
trustedvm-pineapple-camera-sensor-qrd.dtbo
|
||||
19
trustedvm-pineapple-camera-sensor-cdp.dts
Normal file
19
trustedvm-pineapple-camera-sensor-cdp.dts
Normal file
@@ -0,0 +1,19 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/msm-camera.h>
|
||||
|
||||
#include "trustedvm-pineapple-camera.dtsi"
|
||||
#include "trustedvm-pineapple-camera-sensor-cdp.dtsi"
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Pineapple CDP/RCM - TrustedVM";
|
||||
compatible = "qcom,pineapple-cdp", "qcom,pineapple", "qcom,cdp", "qcom,rcm", "qcom,pineapple-rcm";
|
||||
qcom,msm-id = <557 0x10000>, <557 0x20000>, <577 0x10000>, <577 0x20000>;
|
||||
qcom,board-id = <0x10001 0>, <21 0>;
|
||||
};
|
||||
250
trustedvm-pineapple-camera-sensor-cdp.dtsi
Normal file
250
trustedvm-pineapple-camera-sensor-cdp.dtsi
Normal file
@@ -0,0 +1,250 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
&soc {
|
||||
led_flash_triple_rear_wide: qcom,camera-flash1 {
|
||||
cell-index = <1>;
|
||||
compatible = "qcom,camera-flash";
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
led_flash_triple_rear_tele: qcom,camera-flash2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,camera-flash";
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
led_flash_triple_rear_ultrawide: qcom,camera-flash3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,camera-flash";
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
led_flash_aon_rear: qcom,camera-flash4 {
|
||||
cell-index = <4>;
|
||||
compatible = "qcom,camera-flash";
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-res-mgr {
|
||||
compatible = "qcom,cam-res-mgr";
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
|
||||
&cam_cci0 {
|
||||
|
||||
actuator_triple_wide: qcom,actuator2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,actuator";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
ois_wide: qcom,ois0 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,ois";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_tof1: qcom,eeprom7 {
|
||||
cell-index = <7>;
|
||||
compatible = "qcom,eeprom";
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk0_active
|
||||
&cam_sensor_active_rst0>;
|
||||
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
||||
&cam_sensor_suspend_rst0>;
|
||||
gpios = <&tlmm 100 0>,
|
||||
<&tlmm 13 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK0",
|
||||
"CAM_RESET0";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_wide: qcom,eeprom2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,eeprom";
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk1_active
|
||||
&cam_sensor_active_rst1>;
|
||||
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
||||
&cam_sensor_suspend_rst1>;
|
||||
gpios = <&tlmm 101 0>,
|
||||
<&tlmm 15 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK1",
|
||||
"CAM_RESET1";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor7 {
|
||||
cell-index = <7>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <0>;
|
||||
eeprom-src = <&eeprom_tof1>;
|
||||
sensor-position-roll = <270>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk0_active
|
||||
&cam_sensor_active_rst0>;
|
||||
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
||||
&cam_sensor_suspend_rst0>;
|
||||
gpios = <&tlmm 100 0>,
|
||||
<&tlmm 13 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK0",
|
||||
"CAM_RESET0";
|
||||
cci-master = <0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <1>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_wide>;
|
||||
ois-src = <&ois_wide>;
|
||||
actuator-src = <&actuator_triple_wide>;
|
||||
led-flash-src = <&led_flash_triple_rear_wide>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk1_active
|
||||
&cam_sensor_active_rst1>;
|
||||
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
||||
&cam_sensor_suspend_rst1>;
|
||||
gpios = <&tlmm 101 0>,
|
||||
<&tlmm 15 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK1",
|
||||
"CAM_RESET1";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&cam_cci1 {
|
||||
actuator_triple_tele: qcom,actuator3{
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,actuator";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_tele: qcom,eeprom3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,eeprom";
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk3_active
|
||||
&cam_sensor_active_rst3>;
|
||||
pinctrl-1 = <&cam_sensor_mclk3_suspend
|
||||
&cam_sensor_suspend_rst3>;
|
||||
gpios = <&tlmm 103 0>,
|
||||
<&tlmm 109 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK3",
|
||||
"CAM_RESET3";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <3>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_tele>;
|
||||
actuator-src = <&actuator_triple_tele>;
|
||||
led-flash-src = <&led_flash_triple_rear_tele>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk3_active
|
||||
&cam_sensor_active_rst3>;
|
||||
pinctrl-1 = <&cam_sensor_mclk3_suspend
|
||||
&cam_sensor_suspend_rst3>;
|
||||
gpios = <&tlmm 103 0>,
|
||||
<&tlmm 109 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK3",
|
||||
"CAM_RESET3";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&cam_cci2 {
|
||||
eeprom_tof2: qcom,eeprom5 {
|
||||
cell-index = <5>;
|
||||
compatible = "qcom,eeprom";
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk5_active
|
||||
&cam_sensor_active_rst5>;
|
||||
pinctrl-1 = <&cam_sensor_mclk5_suspend
|
||||
&cam_sensor_suspend_rst5>;
|
||||
gpios = <&tlmm 105 0>,
|
||||
<&tlmm 110 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK5",
|
||||
"CAM_RESET5";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor5 {
|
||||
cell-index = <5>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <5>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_tof2>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk5_active
|
||||
&cam_sensor_active_rst5>;
|
||||
pinctrl-1 = <&cam_sensor_mclk5_suspend
|
||||
&cam_sensor_suspend_rst5>;
|
||||
gpios = <&tlmm 105 0>,
|
||||
<&tlmm 110 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK5",
|
||||
"CAM_RESET5";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
19
trustedvm-pineapple-camera-sensor-mtp.dts
Normal file
19
trustedvm-pineapple-camera-sensor-mtp.dts
Normal file
@@ -0,0 +1,19 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/msm-camera.h>
|
||||
|
||||
#include "trustedvm-pineapple-camera.dtsi"
|
||||
#include "trustedvm-pineapple-camera-sensor-mtp.dtsi"
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Pineapple MTP - TrustedVM";
|
||||
compatible = "qcom,pineapple-mtp", "qcom,pineapple", "qcom,mtp";
|
||||
qcom,msm-id = <557 0x10000>, <557 0x20000>, <577 0x10000>, <577 0x20000>;
|
||||
qcom,board-id = <0x10008 0>, <0x50008 0>;
|
||||
};
|
||||
250
trustedvm-pineapple-camera-sensor-mtp.dtsi
Normal file
250
trustedvm-pineapple-camera-sensor-mtp.dtsi
Normal file
@@ -0,0 +1,250 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
&soc {
|
||||
led_flash_triple_rear_wide: qcom,camera-flash1 {
|
||||
cell-index = <1>;
|
||||
compatible = "qcom,camera-flash";
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
led_flash_triple_rear_tele: qcom,camera-flash2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,camera-flash";
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
led_flash_triple_rear_ultrawide: qcom,camera-flash3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,camera-flash";
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
led_flash_aon_rear: qcom,camera-flash4 {
|
||||
cell-index = <4>;
|
||||
compatible = "qcom,camera-flash";
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-res-mgr {
|
||||
compatible = "qcom,cam-res-mgr";
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
|
||||
&cam_cci0 {
|
||||
|
||||
actuator_triple_wide: qcom,actuator2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,actuator";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
ois_wide: qcom,ois0 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,ois";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_tof1: qcom,eeprom7 {
|
||||
cell-index = <7>;
|
||||
compatible = "qcom,eeprom";
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk0_active
|
||||
&cam_sensor_active_rst0>;
|
||||
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
||||
&cam_sensor_suspend_rst0>;
|
||||
gpios = <&tlmm 100 0>,
|
||||
<&tlmm 13 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK0",
|
||||
"CAM_RESET0";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_wide: qcom,eeprom2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,eeprom";
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk1_active
|
||||
&cam_sensor_active_rst1>;
|
||||
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
||||
&cam_sensor_suspend_rst1>;
|
||||
gpios = <&tlmm 101 0>,
|
||||
<&tlmm 15 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK1",
|
||||
"CAM_RESET1";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor7 {
|
||||
cell-index = <7>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <0>;
|
||||
eeprom-src = <&eeprom_tof1>;
|
||||
sensor-position-roll = <270>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk0_active
|
||||
&cam_sensor_active_rst0>;
|
||||
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
||||
&cam_sensor_suspend_rst0>;
|
||||
gpios = <&tlmm 100 0>,
|
||||
<&tlmm 13 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK0",
|
||||
"CAM_RESET0";
|
||||
cci-master = <0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <1>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_wide>;
|
||||
ois-src = <&ois_wide>;
|
||||
actuator-src = <&actuator_triple_wide>;
|
||||
led-flash-src = <&led_flash_triple_rear_wide>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk1_active
|
||||
&cam_sensor_active_rst1>;
|
||||
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
||||
&cam_sensor_suspend_rst1>;
|
||||
gpios = <&tlmm 101 0>,
|
||||
<&tlmm 15 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK1",
|
||||
"CAM_RESET1";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&cam_cci1 {
|
||||
actuator_triple_tele: qcom,actuator3{
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,actuator";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_tele: qcom,eeprom3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,eeprom";
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk3_active
|
||||
&cam_sensor_active_rst3>;
|
||||
pinctrl-1 = <&cam_sensor_mclk3_suspend
|
||||
&cam_sensor_suspend_rst3>;
|
||||
gpios = <&tlmm 103 0>,
|
||||
<&tlmm 109 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK3",
|
||||
"CAM_RESET3";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <3>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_tele>;
|
||||
actuator-src = <&actuator_triple_tele>;
|
||||
led-flash-src = <&led_flash_triple_rear_tele>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk3_active
|
||||
&cam_sensor_active_rst3>;
|
||||
pinctrl-1 = <&cam_sensor_mclk3_suspend
|
||||
&cam_sensor_suspend_rst3>;
|
||||
gpios = <&tlmm 103 0>,
|
||||
<&tlmm 109 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK3",
|
||||
"CAM_RESET3";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&cam_cci2 {
|
||||
eeprom_tof2: qcom,eeprom5 {
|
||||
cell-index = <5>;
|
||||
compatible = "qcom,eeprom";
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk5_active
|
||||
&cam_sensor_active_rst5>;
|
||||
pinctrl-1 = <&cam_sensor_mclk5_suspend
|
||||
&cam_sensor_suspend_rst5>;
|
||||
gpios = <&tlmm 105 0>,
|
||||
<&tlmm 110 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK5",
|
||||
"CAM_RESET5";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor5 {
|
||||
cell-index = <5>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <5>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_tof2>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk5_active
|
||||
&cam_sensor_active_rst5>;
|
||||
pinctrl-1 = <&cam_sensor_mclk5_suspend
|
||||
&cam_sensor_suspend_rst5>;
|
||||
gpios = <&tlmm 105 0>,
|
||||
<&tlmm 110 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK5",
|
||||
"CAM_RESET5";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
19
trustedvm-pineapple-camera-sensor-qrd.dts
Normal file
19
trustedvm-pineapple-camera-sensor-qrd.dts
Normal file
@@ -0,0 +1,19 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/msm-camera.h>
|
||||
|
||||
#include "trustedvm-pineapple-camera.dtsi"
|
||||
#include "trustedvm-pineapple-camera-sensor-qrd.dtsi"
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Pineapple QRD - TrustedVM";
|
||||
compatible = "qcom,pineapple-qrd", "qcom,pineapple", "qcom,qrd";
|
||||
qcom,msm-id = <557 0x10000>, <557 0x20000>, <577 0x10000>, <577 0x20000>;
|
||||
qcom,board-id = <15 0>, <0x1000B 0>, <0x5000B 0>, <0x1f 0>;
|
||||
};
|
||||
250
trustedvm-pineapple-camera-sensor-qrd.dtsi
Normal file
250
trustedvm-pineapple-camera-sensor-qrd.dtsi
Normal file
@@ -0,0 +1,250 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
&soc {
|
||||
led_flash_triple_rear_wide: qcom,camera-flash1 {
|
||||
cell-index = <1>;
|
||||
compatible = "qcom,camera-flash";
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
led_flash_triple_rear_tele: qcom,camera-flash2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,camera-flash";
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
led_flash_triple_rear_ultrawide: qcom,camera-flash3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,camera-flash";
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
led_flash_aon_rear: qcom,camera-flash4 {
|
||||
cell-index = <4>;
|
||||
compatible = "qcom,camera-flash";
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-res-mgr {
|
||||
compatible = "qcom,cam-res-mgr";
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
|
||||
&cam_cci0 {
|
||||
|
||||
actuator_triple_wide: qcom,actuator2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,actuator";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
ois_wide: qcom,ois0 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,ois";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_tof1: qcom,eeprom7 {
|
||||
cell-index = <7>;
|
||||
compatible = "qcom,eeprom";
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk0_active
|
||||
&cam_sensor_active_rst0>;
|
||||
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
||||
&cam_sensor_suspend_rst0>;
|
||||
gpios = <&tlmm 100 0>,
|
||||
<&tlmm 13 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK0",
|
||||
"CAM_RESET0";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_wide: qcom,eeprom2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,eeprom";
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk1_active
|
||||
&cam_sensor_active_rst1>;
|
||||
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
||||
&cam_sensor_suspend_rst1>;
|
||||
gpios = <&tlmm 101 0>,
|
||||
<&tlmm 15 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK1",
|
||||
"CAM_RESET1";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor7 {
|
||||
cell-index = <7>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <0>;
|
||||
eeprom-src = <&eeprom_tof1>;
|
||||
sensor-position-roll = <270>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk0_active
|
||||
&cam_sensor_active_rst0>;
|
||||
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
||||
&cam_sensor_suspend_rst0>;
|
||||
gpios = <&tlmm 100 0>,
|
||||
<&tlmm 13 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK0",
|
||||
"CAM_RESET0";
|
||||
cci-master = <0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <1>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_wide>;
|
||||
ois-src = <&ois_wide>;
|
||||
actuator-src = <&actuator_triple_wide>;
|
||||
led-flash-src = <&led_flash_triple_rear_wide>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk1_active
|
||||
&cam_sensor_active_rst1>;
|
||||
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
||||
&cam_sensor_suspend_rst1>;
|
||||
gpios = <&tlmm 101 0>,
|
||||
<&tlmm 15 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK1",
|
||||
"CAM_RESET1";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&cam_cci1 {
|
||||
actuator_triple_tele: qcom,actuator3{
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,actuator";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_tele: qcom,eeprom3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,eeprom";
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk3_active
|
||||
&cam_sensor_active_rst3>;
|
||||
pinctrl-1 = <&cam_sensor_mclk3_suspend
|
||||
&cam_sensor_suspend_rst3>;
|
||||
gpios = <&tlmm 103 0>,
|
||||
<&tlmm 109 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK3",
|
||||
"CAM_RESET3";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <3>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_tele>;
|
||||
actuator-src = <&actuator_triple_tele>;
|
||||
led-flash-src = <&led_flash_triple_rear_tele>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk3_active
|
||||
&cam_sensor_active_rst3>;
|
||||
pinctrl-1 = <&cam_sensor_mclk3_suspend
|
||||
&cam_sensor_suspend_rst3>;
|
||||
gpios = <&tlmm 103 0>,
|
||||
<&tlmm 109 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK3",
|
||||
"CAM_RESET3";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&cam_cci2 {
|
||||
eeprom_tof2: qcom,eeprom5 {
|
||||
cell-index = <5>;
|
||||
compatible = "qcom,eeprom";
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk5_active
|
||||
&cam_sensor_active_rst5>;
|
||||
pinctrl-1 = <&cam_sensor_mclk5_suspend
|
||||
&cam_sensor_suspend_rst5>;
|
||||
gpios = <&tlmm 105 0>,
|
||||
<&tlmm 110 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK5",
|
||||
"CAM_RESET5";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor5 {
|
||||
cell-index = <5>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <5>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_tof2>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk5_active
|
||||
&cam_sensor_active_rst5>;
|
||||
pinctrl-1 = <&cam_sensor_mclk5_suspend
|
||||
&cam_sensor_suspend_rst5>;
|
||||
gpios = <&tlmm 105 0>,
|
||||
<&tlmm 110 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK5",
|
||||
"CAM_RESET5";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
2581
trustedvm-pineapple-camera.dtsi
Normal file
2581
trustedvm-pineapple-camera.dtsi
Normal file
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user