Add 'qcom/bt/' from BTFM.LA.1.0.r1-06600-pakala.0 of https://git.codelinaro.org/clo/la/platform/vendor/qcom-opensource/bt-devicetree
git-subtree-dir: qcom/bt git-subtree-mainline:859bb7cd14git-subtree-split:cb9f7d1bbb
This commit is contained in:
kmiit
36
qcom/bt/Kbuild
Normal file
36
qcom/bt/Kbuild
Normal file
@@ -0,0 +1,36 @@
|
||||
ifeq ($(CONFIG_ARCH_PINEAPPLE),y)
|
||||
dtbo-y += pineapple-kiwi-bt.dtbo
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ARCH_TUNA),y)
|
||||
dtbo-y += tuna-wcn7750-bt.dtbo
|
||||
dtbo-y += tuna-kiwi-bt.dtbo
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ARCH_KERA), y)
|
||||
dtbo-y += kera-qca6750-bt.dtbo
|
||||
dtbo-y += kera-wcn7750-bt.dtbo
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ARCH_SUN), y)
|
||||
dtbo-y += sun-peach-bt.dtbo
|
||||
dtbo-y += sun-kiwi-bt.dtbo
|
||||
dtbo-y += sun-peach-bt-v8.dtbo
|
||||
dtbo-y += sun-kiwi-bt-v8.dtbo
|
||||
dtbo-y += sun-wcn786x-v8.dtbo
|
||||
dtbo-y += sunp-hdk-peach-bt-v8.dtbo
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ARCH_RAVELIN), y)
|
||||
dtbo-y += ravelin-bt.dtbo
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ARCH_PARROT), y)
|
||||
dtbo-y += parrot-wcn3990-bt.dtbo
|
||||
dtbo-y += parrot-wcn6750-bt.dtbo
|
||||
endif
|
||||
|
||||
always-y := $(dtb-y) $(dtbo-y)
|
||||
subdir-y := $(dts-dirs)
|
||||
clean-files := *.dtb *.dtbo
|
||||
|
||||
9
qcom/bt/Makefile
Normal file
9
qcom/bt/Makefile
Normal file
@@ -0,0 +1,9 @@
|
||||
KBUILD_OPTIONS += KBUILD_EXTMOD_DTS=.
|
||||
|
||||
all: dtbs
|
||||
|
||||
clean:
|
||||
$(MAKE) -C $(KERNEL_SRC) M=$(M) clean
|
||||
|
||||
%:
|
||||
$(MAKE) -C $(KERNEL_SRC) M=$(M) $@ $(KBUILD_OPTIONS)
|
||||
16
qcom/bt/bindings/bluetooth/btfm_slim.txt
Normal file
16
qcom/bt/bindings/bluetooth/btfm_slim.txt
Normal file
@@ -0,0 +1,16 @@
|
||||
* BTFM Slimbus Slave Driver
|
||||
BTFM Slimbus Slave driver configure and initialize slimbus slave device.
|
||||
Bluetooth A2DP, SCO and FM Audio data is transferred over slimbus interface.
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be set to the following where 217 is manufacture id and 221 is prod id:
|
||||
ex. HSP elmental address is 0x000120021702
|
||||
compatible = "slim217,221"
|
||||
- reg should be filled as per specs
|
||||
reg = <1 0>;
|
||||
|
||||
Example:
|
||||
slimbus: btfmslim-driver {
|
||||
compatible = "slim217,221";
|
||||
reg = <1 0>;
|
||||
};
|
||||
60
qcom/bt/bindings/bluetooth/btpower.txt
Normal file
60
qcom/bt/bindings/bluetooth/btpower.txt
Normal file
@@ -0,0 +1,60 @@
|
||||
* Bluetooth Controller
|
||||
Bluetooth controller communicates with the Bluetooth Host using HCI Transport
|
||||
layer. HCI Transport layer can be based on UART or USB serial communication
|
||||
protocol.
|
||||
|
||||
Required properties:
|
||||
- compatible: "qcom,<chip>"
|
||||
chip: Should be set to one of the following:
|
||||
qcom,qca6174
|
||||
qcom,wcn3990
|
||||
qcom,qca6390
|
||||
qcom,qca6490
|
||||
qcom,kiwi
|
||||
- qcom,bt-reset-gpio: GPIO pin to bring BT Controller out of reset
|
||||
|
||||
Optional properties:
|
||||
- qcom,xo-clk-gpio: GPIO for enabling clock at bootstrap
|
||||
- qcom,bt-vdd-pa-supply: Bluetooth VDD PA regulator handle
|
||||
- qcom,bt-vdd-io-supply: Bluetooth VDD IO regulator handle
|
||||
- qcom,bt-vdd-ldo-supply: Bluetooth VDD LDO regulator handle. Kept under
|
||||
optional parameters as some of the chipsets doesn't require ldo
|
||||
or it may use from same vddio.
|
||||
- qcom,bt-vdd-xtal-supply: Bluetooth VDD XTAL regulator handle
|
||||
- qcom,bt-vdd-core-supply: Bluetooth VDD CORE regulator handle
|
||||
- qcom,bt-vdd-asd-supply: Bluetooth VDD regulator handle for antenna switch
|
||||
- reg: Memory regions defined as starting address and size
|
||||
- reg-names: Names of the memory regions defined in reg entry
|
||||
diversity.
|
||||
- qcom,bt-chip-pwd-supply: Chip power down gpio is required when bluetooth
|
||||
module and other modules like wifi co-exist in a singe chip and
|
||||
shares a common gpio to bring chip out of reset.
|
||||
- qcom,<supply>-config: Specifies voltage/current levels for supply. Should specified
|
||||
in pairs (min, max), units uV. There can be optional
|
||||
load in curr, unit uA. Last entry specifies if the retention
|
||||
mode is supported for the regulator.
|
||||
- mboxes: Specifies mbox channel data for AOP messaging
|
||||
- qcom,vreg_ipa: Specifies Voltage regulator used for QCA6490 Internal Power
|
||||
Amp config
|
||||
|
||||
Example:
|
||||
bluetooth: bt_qca6490 {
|
||||
compatible = "qcom,qca6390", "qcom,qca6490";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_en_sleep>;
|
||||
qcom,bt-reset-gpio = <&tlmm 81 0>; /* BT_EN */
|
||||
qcom,wl-reset-gpio = <&tlmm 80 0>; /* WL_EN */
|
||||
qcom,bt-sw-ctrl-gpio = <&tlmm 82 0>; /* SW_CTRL */
|
||||
qcom,bt-xo-clk-gpio = <&tlmm 204 0>; /* XO */
|
||||
qcom,bt-vdd-aon-supply = <&S11B>;
|
||||
qcom,bt-vdd-dig-supply = <&S11B>;
|
||||
qcom,bt-vdd-rfa1-supply = <&S1C>;
|
||||
qcom,bt-vdd-rfa2-supply = <&S12B>;
|
||||
qcom,bt-vdd-asd-supply = <&L7E>;
|
||||
|
||||
qcom,bt-vdd-aon-config = <966000 966000 0 1>;
|
||||
qcom,bt-vdd-dig-config = <966000 966000 0 1>;
|
||||
qcom,bt-vdd-rfa1-config = <1880000 1880000 0 1>;
|
||||
qcom,bt-vdd-rfa2-config = <1350000 1350000 0 1>;
|
||||
qcom,bt-vdd-asd-config = <2800000 2800000 0 1>;
|
||||
};
|
||||
13
qcom/bt/bindings/bt-fm/rtc6226_fm.txt
Normal file
13
qcom/bt/bindings/bt-fm/rtc6226_fm.txt
Normal file
@@ -0,0 +1,13 @@
|
||||
Richwave FM radio device
|
||||
|
||||
-FM RX playback with RDS
|
||||
FM signal is demodulated then audio L/R samples are sent to external audio codec.
|
||||
FM Rx RDS data received sent to host processor on I2C.
|
||||
|
||||
Required Properties:
|
||||
- compatible: "rtc6226"
|
||||
|
||||
Example:
|
||||
rtc6226 {
|
||||
compatible = "rtc6226";
|
||||
};
|
||||
22
qcom/bt/kera-qca6750-bt.dts
Normal file
22
qcom/bt/kera-qca6750-bt.dts
Normal file
@@ -0,0 +1,22 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "kera-qca6750-bt.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Kera";
|
||||
compatible = "qcom,kera-atp", "qcom,kera", "qcom,atp",
|
||||
"qcom,kera-cdp", "qcom,cdp", "qcom,kera-mtp",
|
||||
"qcom,mtp", "qcom,kera-rcm", "qcom,rcm";
|
||||
qcom,msm-id = <686 0x10000>, <659 0x10000>;
|
||||
qcom,board-id = <0x000021 0>, <0x010001 0>, <0x020001 0>,
|
||||
<0x030001 0>, <0x040001 0>, <0x010008 0>,
|
||||
<0x020008 0>, <0x030008 0>, <0x010015 0>,
|
||||
<0x020015 0>, <0x030015 0>, <0x03000B 1>,
|
||||
<0x050001 0>;
|
||||
};
|
||||
100
qcom/bt/kera-qca6750-bt.dtsi
Normal file
100
qcom/bt/kera-qca6750-bt.dtsi
Normal file
@@ -0,0 +1,100 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/interconnect/qcom,kera.h>
|
||||
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||
|
||||
&pm8550vs_g_gpios {
|
||||
bt_en: bt_en {
|
||||
pins = "gpio4";
|
||||
function = "normal";
|
||||
input-disable;
|
||||
output-enable;
|
||||
bias-disable;
|
||||
power-source = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
cnss_bt_sw_ctrl: cnss_wlan_sw_ctrl {
|
||||
mux {
|
||||
pins = "gpio81";
|
||||
function = "wcn_sw_ctrl";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
bluetooth: bt_wcn6750 {
|
||||
compatible = "qcom,wcn6750-bt";
|
||||
|
||||
pinctrl-names = "bt_en", "sw_ctrl";
|
||||
pinctrl-0 = <&bt_en>;
|
||||
pinctrl-1 = <&cnss_bt_sw_ctrl>;
|
||||
|
||||
qcom,wl-reset-gpio = <&tlmm 35 0>; /* WCN_WLAN_EN */
|
||||
qcom,bt-sw-ctrl-gpio = <&tlmm 81 0>; /* WCN_SW_CTRL */
|
||||
qcom,bt-reset-gpio = <&pm8550vs_g_gpios 4 0>; /* WCN_BT_EN */
|
||||
|
||||
qcom,bt-vdd-io-supply = <&L11B>; /* IO */
|
||||
qcom,bt-vdd-aon-supply = <&S3B>;
|
||||
qcom,bt-vdd-dig-supply = <&S3B>; /* BT_CX_MX */
|
||||
qcom,bt-vdd-rfacmn-supply = <&S3B>;
|
||||
qcom,bt-vdd-rfa-0p8-supply = <&S3B>;
|
||||
qcom,bt-vdd-rfa1-supply = <&S1B>; /*RFA 1p7*/
|
||||
qcom,bt-vdd-rfa2-supply = <&S2B>; /*RFA 1p2*/
|
||||
qcom,bt-vdd-ipa-2p2-supply = <&S4B>; /*IPA 2p2*/
|
||||
|
||||
/* max voltage are set to regulator max voltage supported */
|
||||
qcom,bt-vdd-io-config = <1620000 1800000 0 1>;
|
||||
qcom,bt-vdd-aon-config = <920000 2736000 0 1>;
|
||||
qcom,bt-vdd-dig-config = <920000 2736000 0 1>;
|
||||
qcom,bt-vdd-rfacmn-config = <920000 2736000 0 1>;
|
||||
qcom,bt-vdd-rfa-0p8-config = <920000 2736000 0 1>;
|
||||
qcom,bt-vdd-rfa1-config = <1856000 2044000 0 1>;
|
||||
qcom,bt-vdd-rfa2-config = <1256000 2092000 0 1>;
|
||||
qcom,bt-vdd-ipa-2p2-config = <2200000 2700000 0 1>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&slim_msm {
|
||||
status = "ok";
|
||||
ngd@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
//slimbus child nodes
|
||||
slimbus: btfmslim-driver {
|
||||
compatible = "slim217,221";
|
||||
reg = <1 0>;
|
||||
qcom,btslim-address = <0x0>;
|
||||
qcom,btslimtx-channels = <159 160>;
|
||||
qcom,btslimrx-channels = <157 158>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
//uart instance
|
||||
&qupv3_se5_4uart {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
// FM changes
|
||||
&qupv3_se4_i2c {
|
||||
status = "ok";
|
||||
nq@64 {
|
||||
compatible = "rtc6226";
|
||||
reg = <0x64>;
|
||||
fmint-gpio = <&tlmm 130 0>;
|
||||
vdd-supply = <&L18B>;
|
||||
rtc6226,vdd-supply-voltage = <2800000 2800000>;
|
||||
rtc6226,vdd-load = <15000>;
|
||||
vio-supply = <&L7B>;
|
||||
rtc6226,vio-supply-voltage = <1800000 1800000>;
|
||||
};
|
||||
};
|
||||
20
qcom/bt/kera-wcn7750-bt.dts
Normal file
20
qcom/bt/kera-wcn7750-bt.dts
Normal file
@@ -0,0 +1,20 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "kera-wcn7750-bt.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Kera";
|
||||
compatible = "qcom,kera-mtp", "qcom,kera", "qcom,mtp",
|
||||
"qcom,kera-qrd", "qcom,qrd", "qcom,kera-rcm",
|
||||
"qcom,rcm";
|
||||
qcom,msm-id = <686 0x10000>, <659 0x10000>;
|
||||
qcom,board-id = <0x010008 1>, <0x020008 1>, <0x030008 1>,
|
||||
<0x01000B 0>, <0x02000B 0>, <0x03000B 0>,
|
||||
<0x010015 1>, <0x020015 1>, <0x030015 1>;
|
||||
};
|
||||
106
qcom/bt/kera-wcn7750-bt.dtsi
Normal file
106
qcom/bt/kera-wcn7750-bt.dtsi
Normal file
@@ -0,0 +1,106 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/interconnect/qcom,kera.h>
|
||||
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||
|
||||
&pm8550vs_g_gpios {
|
||||
bt_en: bt_en {
|
||||
pins = "gpio4";
|
||||
function = "normal";
|
||||
input-disable;
|
||||
output-enable;
|
||||
bias-disable;
|
||||
power-source = <2>;
|
||||
};
|
||||
bt_fmd_clk_en: bt_fmd_clk_en {
|
||||
pins = "gpio3";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
output-disable;
|
||||
bias-disable;
|
||||
power-source = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
cnss_bt_sw_ctrl: cnss_wlan_sw_ctrl {
|
||||
mux {
|
||||
pins = "gpio81";
|
||||
function = "wcn_sw_ctrl";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
bluetooth: bt_kera {
|
||||
compatible = "qcom,wcn7750-bt";
|
||||
qcom,wcn7750-bt;
|
||||
|
||||
nvmem-cell-names = "fmd_set", "fmd_chg_pon", "fmd_cnt2_stop";
|
||||
nvmem-cells = <&fmd_set>, <&fmd_chg_pon>, <&fmd_cnt2_stop>;
|
||||
|
||||
pinctrl-names = "bt_en", "sw_ctrl", "bt_fmd_clk_en";
|
||||
pinctrl-0 = <&bt_en>;
|
||||
pinctrl-1 = <&cnss_bt_sw_ctrl>;
|
||||
pinctrl-2 = <&bt_fmd_clk_en>;
|
||||
|
||||
clock-names = "bt_rf_clk1";
|
||||
clocks = <&rpmhcc RPMH_RF_CLK1>;
|
||||
|
||||
mpm_wake_set_gpios = <81>;
|
||||
qcom,wl-reset-gpio = <&tlmm 35 0>; /* WCN_WIFI_EN */
|
||||
qcom,bt-sw-ctrl-gpio = <&tlmm 81 0>; /* WCN_SW_CTRL */
|
||||
qcom,bt-fmd-clk-gpio = <&pm8550vs_g_gpios 3 0>; /* FMD_CLK_EN */
|
||||
qcom,bt-reset-gpio = <&pm8550vs_g_gpios 4 0>; /* WCN_BT_EN */
|
||||
|
||||
qcom,bt-vdd-io-supply = <&L7B>; /* WCN_1P8_IO */
|
||||
qcom,bt-vdd-aon-supply = <&L11B>; /* AON LDO */
|
||||
qcom,bt-vdd-rfacmn-supply = <&S3B>; /* RF 0p8/CMN */
|
||||
qcom,bt-vdd-dig-supply = <&S3B>; /* BT LDO/BT_CX_MX */
|
||||
qcom,bt-vdd-rfa-0p8-supply = <&L6K>; /* RFA 0p8 / AV91C_VDD */
|
||||
qcom,bt-vdd-rfa1-supply = <&S1B>; /* RFA 1p7 */
|
||||
qcom,bt-vdd-rfa2-supply = <&S2B>; /* RFA 1p2 */
|
||||
qcom,bt-vdd-ipa-2p2-supply = <&S4B>; /* WCN_2p2_RFA */
|
||||
|
||||
qcom,bt-vdd-io-config = <1620000 1800000 0 1 1>;
|
||||
qcom,bt-vdd-aon-config = <1800000 1800000 0 1 0>;
|
||||
qcom,bt-vdd-rfacmn-config = <880000 2736000 0 1 0>;
|
||||
qcom,bt-vdd-dig-config = <880000 2736000 0 1 0>;
|
||||
qcom,bt-vdd-rfa-0p8-config = <900000 2000000 0 1 0>;
|
||||
qcom,bt-vdd-rfa1-config = <1856000 2044000 0 1 0>;
|
||||
qcom,bt-vdd-rfa2-config = <1256000 2092000 0 1 0>;
|
||||
qcom,bt-vdd-ipa-2p2-config = <2156000 2700000 0 1 1>;
|
||||
};
|
||||
};
|
||||
|
||||
&swr4 {
|
||||
btswr_slave: btswr-slave {
|
||||
compatible = "qcom,btfmswr_slave";
|
||||
reg = <0x02 0x08170220>;
|
||||
};
|
||||
};
|
||||
|
||||
//uart instance
|
||||
&qupv3_se5_4uart {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
// FM changes
|
||||
&qupv3_se4_i2c {
|
||||
status = "ok";
|
||||
nq@64 {
|
||||
compatible = "rtc6226";
|
||||
reg = <0x64>;
|
||||
fmint-gpio = <&tlmm 130 0>;
|
||||
vdd-supply = <&L18B>;
|
||||
rtc6226,vdd-supply-voltage = <2800000 2800000>;
|
||||
rtc6226,vdd-load = <15000>;
|
||||
vio-supply = <&L7B>;
|
||||
rtc6226,vio-supply-voltage = <1800000 1800000>;
|
||||
};
|
||||
};
|
||||
22
qcom/bt/parrot-wcn3990-bt.dts
Normal file
22
qcom/bt/parrot-wcn3990-bt.dts
Normal file
@@ -0,0 +1,22 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "parrot-wcn3990-bt.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Parrot SoC";
|
||||
compatible = "qcom,parrot";
|
||||
qcom,msm-id = <537 0x10000>, <583 0x10000>,
|
||||
<613 0x10000>, <631 0x10000>,
|
||||
<633 0x10000>, <634 0x10000>,
|
||||
<638 0x10000>, <663 0x10000>,
|
||||
<713 0x10000>, <714 0x10000>;
|
||||
qcom,board-id = <33 0>, <34 1>, <34 3>, <34 0x601>, <34 0x603>, <0x1000B 0x600>, <0x1000B 0>;
|
||||
};
|
||||
|
||||
63
qcom/bt/parrot-wcn3990-bt.dtsi
Normal file
63
qcom/bt/parrot-wcn3990-bt.dtsi
Normal file
@@ -0,0 +1,63 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
&soc {
|
||||
bluetooth: bt_wcn3990 {
|
||||
compatible = "qcom,wcn3990";
|
||||
qcom,bt-sw-ctrl-gpio = <&tlmm 61 GPIO_ACTIVE_HIGH>;
|
||||
qcom,bt-vdd-io-supply = <&L22B>; /* IO */
|
||||
qcom,bt-vdd-core-supply = <&L14B>; /* RFA */
|
||||
qcom,bt-vdd-pa-supply = <&L10E>; /* CH0 */
|
||||
qcom,bt-vdd-xtal-supply = <&L1E>; /* XO */
|
||||
|
||||
qcom,bt-vdd-io-config = <1700000 1900000 1 0>;
|
||||
qcom,bt-vdd-core-config = <1304000 1304000 1 0>;
|
||||
qcom,bt-vdd-pa-config = <3000000 3312000 1 0>;
|
||||
qcom,bt-vdd-xtal-config = <1700000 1900000 1 0>;
|
||||
};
|
||||
|
||||
slim_msm: slim@3340000 {
|
||||
status = "ok";
|
||||
ngd@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
//slimbus child nodes
|
||||
slimbus: btfmslim-driver {
|
||||
compatible = "slim217,221";
|
||||
reg = <1 0>;
|
||||
qcom,btslim-address = <0x0>; /* BT SLIM EP address*/
|
||||
qcom,btslimtx-channels = <159 160>;
|
||||
qcom,btslimrx-channels = <157 158>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
//FM changes
|
||||
&qupv3_se2_i2c {
|
||||
status = "ok";
|
||||
nq@64 {
|
||||
compatible = "rtc6226";
|
||||
reg = <0x64>;
|
||||
fmint-gpio = <&tlmm 105 0>;
|
||||
vdd-supply = <&L5E>;
|
||||
rtc6226,vdd-supply-voltage = <2800000 2800000>;
|
||||
rtc6226,vdd-load = <15000>;
|
||||
vio-supply = <&L22B>;
|
||||
rtc6226,vio-supply-voltage = <1800000 1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
//uart instance
|
||||
&qupv3_se11_4uart {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
|
||||
22
qcom/bt/parrot-wcn6750-bt.dts
Normal file
22
qcom/bt/parrot-wcn6750-bt.dts
Normal file
@@ -0,0 +1,22 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "parrot-wcn6750-bt.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Parrot SoC";
|
||||
compatible = "qcom,parrot";
|
||||
qcom,msm-id = <537 0x10000>, <583 0x10000>,
|
||||
<613 0x10000>, <631 0x10000>,
|
||||
<633 0x10000>, <634 0x10000>,
|
||||
<638 0x10000>, <663 0x10000>,
|
||||
<713 0x10000>, <714 0x10000>;
|
||||
qcom,board-id = <34 0>, <34 2>, <34 4>, <34 5>, <34 6>, <34 0x600>, <34 0x602>, <34 0x604>, <0x1000B 1>, <0x1000B 2>, <0x1000B 0x601>;
|
||||
};
|
||||
|
||||
78
qcom/bt/parrot-wcn6750-bt.dtsi
Normal file
78
qcom/bt/parrot-wcn6750-bt.dtsi
Normal file
@@ -0,0 +1,78 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
&soc {
|
||||
bluetooth: bt_wcn6750 {
|
||||
compatible = "qcom,wcn6750-bt";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_en_sleep>;
|
||||
qcom,bt-reset-gpio = <&tlmm 35 0>; /* BT_EN */
|
||||
qcom,bt-sw-ctrl-gpio = <&tlmm 61 0>; /* SW_CTRL */
|
||||
qcom,wl-reset-gpio = <&tlmm 36 0>; /* WL_EN */
|
||||
tsens = "quiet-therm";
|
||||
|
||||
qcom,bt-vdd-io-supply = <&L22B>; /* IO */
|
||||
qcom,bt-vdd-aon-supply = <&S7B>;
|
||||
qcom,bt-vdd-dig-supply = <&S7B>; /* BT_CX_MX */
|
||||
qcom,bt-vdd-rfacmn-supply = <&S7B>;
|
||||
qcom,bt-vdd-rfa-0p8-supply = <&S7B>;
|
||||
qcom,bt-vdd-rfa1-supply = <&S8E>; /*RFA 1p7*/
|
||||
qcom,bt-vdd-rfa2-supply = <&S8B>; /*RFA 1p2*/
|
||||
qcom,bt-vdd-ipa-2p2-supply = <&S9B>; /*IPA 2p2*/
|
||||
//qcom,bt-vdd-asd-supply = <&L11C>;
|
||||
|
||||
/* max voltage are set to regulator max voltage supported */
|
||||
qcom,bt-vdd-io-config = <1800000 2000000 0 1>;
|
||||
qcom,bt-vdd-aon-config = <824000 1174000 0 1>;
|
||||
qcom,bt-vdd-dig-config = <824000 1174000 0 1>;
|
||||
qcom,bt-vdd-rfacmn-config = <824000 1174000 0 1>;
|
||||
qcom,bt-vdd-rfa-0p8-config = <824000 1174000 0 1>;
|
||||
qcom,bt-vdd-rfa1-config = <1872000 2040000 0 1>;
|
||||
qcom,bt-vdd-rfa2-config = <1256000 1654000 0 1>;
|
||||
qcom,bt-vdd-ipa-2p2-config = <2200000 2208000 0 1>;
|
||||
//qcom,bt-vdd-asd-config = <2800000 3544000 0 1>;
|
||||
};
|
||||
|
||||
slim_msm: slim@3340000 {
|
||||
status = "ok";
|
||||
ngd@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
//slimbus child nodes
|
||||
slimbus: btfmslim-driver {
|
||||
compatible = "slim217,221";
|
||||
reg = <1 0>;
|
||||
qcom,btslim-address = <0x0>; /* BT SLIM EP address*/
|
||||
qcom,btslimtx-channels = <159 160>;
|
||||
qcom,btslimrx-channels = <157 158>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
//FM changes
|
||||
&qupv3_se2_i2c {
|
||||
status = "ok";
|
||||
nq@64 {
|
||||
compatible = "rtc6226";
|
||||
reg = <0x64>;
|
||||
fmint-gpio = <&tlmm 105 0>;
|
||||
vdd-supply = <&L5E>;
|
||||
rtc6226,vdd-supply-voltage = <2800000 2800000>;
|
||||
rtc6226,vdd-load = <15000>;
|
||||
vio-supply = <&L22B>;
|
||||
rtc6226,vio-supply-voltage = <1800000 1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
//uart instance
|
||||
&qupv3_se11_4uart {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
18
qcom/bt/pineapple-kiwi-bt.dts
Normal file
18
qcom/bt/pineapple-kiwi-bt.dts
Normal file
@@ -0,0 +1,18 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "pineapple-kiwi-bt.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Pineapple SoCs";
|
||||
compatible = "qcom,pineapple", "qcom,pineapplep";
|
||||
qcom,msm-id = <557 0x10000>, <577 0x10000>, <557 0x20000>, <577 0x20000>,
|
||||
<696 0x20000>;
|
||||
qcom,board-id = <0 0>;
|
||||
};
|
||||
98
qcom/bt/pineapple-kiwi-bt.dtsi
Normal file
98
qcom/bt/pineapple-kiwi-bt.dtsi
Normal file
@@ -0,0 +1,98 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interconnect/qcom,pineapple.h>
|
||||
|
||||
&tlmm {
|
||||
bt_en_sleep: bt_en_sleep {
|
||||
mux {
|
||||
pins = "gpio17";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio17";
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
bluetooth: bt_kiwi {
|
||||
compatible = "qcom,kiwi";
|
||||
pinctrl-names = "bt_en_sleep";
|
||||
pinctrl-0 = <&bt_en_sleep>;
|
||||
/* List of GPIOs to be setup for interrupt wakeup capable*/
|
||||
mpm_wake_set_gpios = <18>;
|
||||
qcom,bt-reset-gpio = <&tlmm 17 0>; /* BT_EN */
|
||||
qcom,wl-reset-gpio = <&tlmm 16 0>; /* WL_EN */
|
||||
qcom,bt-sw-ctrl-gpio = <&tlmm 18 0>; /* SW_CTRL */
|
||||
mboxes = <&qmp_aop 0>;
|
||||
|
||||
qcom,bt-vdd18-aon-supply = <&L15B>; /* BT VDD1.8 AON */
|
||||
qcom,bt-vdd12-io-supply = <&L3C>; /* BT VDD1.2V IO */
|
||||
qcom,bt-ant-ldo-supply = <&L6K>; /* BT ANT */
|
||||
qcom,bt-vdd-dig-supply = <&S3C>; /* BT LDO*/
|
||||
qcom,bt-vdd-aon-supply = <&S3C>; /* BT AON LDO*/
|
||||
qcom,bt-vdd-rfaOp8-supply = <&S3C>; /* BT RFAOp8 CMN LDO*/
|
||||
qcom,bt-vdd-rfa1-supply = <&S1C>; /* BT RFA1.2 LDO */
|
||||
qcom,bt-vdd-rfa2-supply = <&S6C>; /* BT RFA1.8 LDO */
|
||||
|
||||
qcom,bt-vdd18-aon-config = <1800000 1800000 0 1>;
|
||||
qcom,bt-vdd12-io-config = <1200000 1200000 0 1>;
|
||||
qcom,bt-ant-ldo-config = <1800000 1800000 0 1>;
|
||||
qcom,bt-vdd-aon-config = <916000 916000 0 1>;
|
||||
qcom,bt-vdd-dig-config = <916000 916000 0 1>;
|
||||
qcom,bt-vdd-rfaOp8-config = <916000 916000 0 1>;
|
||||
qcom,bt-vdd-rfa1-config = <1316000 1316000 0 1>;
|
||||
qcom,bt-vdd-rfa2-config = <1864000 1864000 0 1>;
|
||||
qcom,pdc_init_table=
|
||||
"{class: wlan_pdc, ss: rf, res: s3c.v, upval: 916}",
|
||||
"{class: wlan_pdc, ss: rf, res: s3c.v, dwnval: 612}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1c.v, upval: 1316}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1c.v, dwnval: 944}",
|
||||
"{class: wlan_pdc, ss: rf, res: s6c.v, upval: 1864}",
|
||||
"{class: wlan_pdc, ss: rf, res: s6c.v, dwnval: 1820}";
|
||||
};
|
||||
slim_msm: slim@6C40000 {
|
||||
status = "ok";
|
||||
ngd@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
//slimbus child nodes
|
||||
slimbus: btfmslim-driver {
|
||||
compatible = "slim217,221";
|
||||
reg = <1 0>;
|
||||
qcom,btslim-address = <0x0>; /* BT SLIM EP address*/
|
||||
qcom,btslimtx-channels = <159 160>; /* slimbus FM_Tx, SCO_Tx channels */
|
||||
qcom,btslimrx-channels = <157 158>; /* slimbus SCO_A2DP_Rx A2DP_Rx */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
// FM changes
|
||||
&qupv3_se6_i2c {
|
||||
status = "ok";
|
||||
nq@64 {
|
||||
compatible = "rtc6226";
|
||||
reg = <0x64>;
|
||||
fmint-gpio = <&tlmm 85 0>;
|
||||
vdd-supply = <&L16B>;
|
||||
rtc6226,vdd-supply-voltage = <2800000 2800000>;
|
||||
rtc6226,vdd-load = <15000>;
|
||||
vio-supply = <&L15B>;
|
||||
rtc6226,vio-supply-voltage = <1800000 1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
//uart instance
|
||||
&qupv3_se14_4uart {
|
||||
status = "ok";
|
||||
};
|
||||
18
qcom/bt/ravelin-bt.dts
Executable file
18
qcom/bt/ravelin-bt.dts
Executable file
@@ -0,0 +1,18 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "ravelin-bt.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Ravelin SoC";
|
||||
compatible = "qcom,ravelin";
|
||||
qcom,msm-id = <568 0x10000>, <581 0x10000>, <582 0x10000>, <602 0x10000>, <653 0x10000>,
|
||||
<654 0x10000>;
|
||||
qcom,board-id = <0 0>, <0x1000B 0>, <0x1000B 0x600>, <33 0>, <34 0>, <34 0x601>, <34 2>;
|
||||
};
|
||||
|
||||
48
qcom/bt/ravelin-bt.dtsi
Executable file
48
qcom/bt/ravelin-bt.dtsi
Executable file
@@ -0,0 +1,48 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interconnect/qcom,ravelin.h>
|
||||
|
||||
&soc {
|
||||
bluetooth: bt_wcn3990 {
|
||||
compatible = "qcom,wcn3990";
|
||||
qcom,bt-sw-ctrl-gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>;
|
||||
qcom,bt-vdd-io-supply = <&L21B>;
|
||||
qcom,bt-vdd-core-supply = <&L14B>;
|
||||
qcom,bt-vdd-pa-supply = <&L7E>;
|
||||
qcom,bt-vdd-xtal-supply = <&L23B>;
|
||||
|
||||
qcom,bt-vdd-io-config = <1700000 1900000 1 0>;
|
||||
qcom,bt-vdd-core-config = <1304000 1304000 1 0>;
|
||||
qcom,bt-vdd-pa-config = <3000000 3312000 1 0>;
|
||||
qcom,bt-vdd-xtal-config = <1700000 1900000 1 0>;
|
||||
};
|
||||
|
||||
slim_msm: slim@3340000 {
|
||||
status = "ok";
|
||||
ngd@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
//slimbus child nodes
|
||||
slimbus: btfmslim-driver {
|
||||
compatible = "slim217,221";
|
||||
reg = <1 0>;
|
||||
qcom,btslim-address = <0x0>; /* BT SLIM EP address*/
|
||||
qcom,btslimtx-channels = <159 160>;
|
||||
qcom,btslimrx-channels = <157 158>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
//uart instance
|
||||
&qupv3_se2_4uart {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
19
qcom/bt/sun-kiwi-bt-v8.dts
Normal file
19
qcom/bt/sun-kiwi-bt-v8.dts
Normal file
@@ -0,0 +1,19 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "sun-kiwi-bt-v8.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Sun SoCs";
|
||||
compatible = "qcom,sun", "qcom,sunp";
|
||||
qcom,msm-id = <618 0x10000>, <618 0x20000>, <639 0x10000>, <639 0x20000>,
|
||||
<0x100026a 0x10000>, <0x100026a 0x20000>,
|
||||
<0x100027f 0x10000>, <0x100027f 0x20000>;
|
||||
qcom,board-id = <0x60001 0>, <0x50008 0>, <0x20015 0>, <0x60108 0>;
|
||||
};
|
||||
120
qcom/bt/sun-kiwi-bt-v8.dtsi
Normal file
120
qcom/bt/sun-kiwi-bt-v8.dtsi
Normal file
@@ -0,0 +1,120 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interconnect/qcom,sun.h>
|
||||
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||
|
||||
&pm8550ve_f_gpios {
|
||||
bt_en: bt_en {
|
||||
pins = "gpio3";
|
||||
function = "normal";
|
||||
input-disable;
|
||||
output-enable;
|
||||
bias-disable;
|
||||
power-source = <2>;
|
||||
};
|
||||
bt_fmd_clk_en: bt_fmd_clk_en {
|
||||
pins = "gpio6";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
output-disable;
|
||||
bias-disable;
|
||||
power-source = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
cnss_bt_sw_ctrl: cnss_wlan_sw_ctrl {
|
||||
mux {
|
||||
pins = "gpio18";
|
||||
function = "wcn_sw_ctrl";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
bluetooth: bt_kiwi {
|
||||
compatible = "qcom,kiwi";
|
||||
nvmem-cells = <&fmd_set>, <&fmd_chg_pon>, <&fmd_cnt2_stop>;
|
||||
nvmem-cell-names = "fmd_set", "fmd_chg_pon", "fmd_cnt2_stop";
|
||||
clocks = <&rpmhcc RPMH_RF_CLK1>;
|
||||
clock-names = "bt_rf_clk1";
|
||||
pinctrl-names = "bt_en", "sw_ctrl", "bt_fmd_clk_en";
|
||||
pinctrl-0 = <&bt_en>;
|
||||
pinctrl-1 = <&cnss_bt_sw_ctrl>;
|
||||
pinctrl-2 = <&bt_fmd_clk_en>;
|
||||
/* List of GPIOs to be setup for interrupt wakeup capable*/
|
||||
mpm_wake_set_gpios = <18>;
|
||||
qcom,wl-reset-gpio = <&tlmm 16 0>; /* WL_EN */
|
||||
qcom,bt-sw-ctrl-gpio = <&tlmm 18 0>; /* SW_CTRL */
|
||||
qcom,bt-fmd-clk-gpio = <&pm8550ve_f_gpios 6 0>; /* FMD_CLK_CTRL */
|
||||
qcom,bt-reset-gpio = <&pm8550ve_f_gpios 3 0>; /* BT_EN */
|
||||
qcom,qmp = <&aoss_qmp>;
|
||||
|
||||
qcom,bt-vdd18-aon-supply = <&L3F>; /* BT VDD1.8 AON */
|
||||
qcom,bt-vdd12-io-supply = <&L2F>; /* BT VDD1.2V IO */
|
||||
qcom,bt-ant-ldo-supply = <&L6K>; /* BT ANT - AV91C_VDD */
|
||||
qcom,bt-vdd-aon-supply = <&S1D>; /* BT AON LDO*/
|
||||
qcom,bt-vdd-rfaOp8-supply = <&S1D>; /* BT RFAOp8 CMN LDO*/
|
||||
qcom,bt-vdd-rfa1-supply = <&S7I>; /* BT RFA1.2 LDO */
|
||||
qcom,bt-vdd-rfa2-supply = <&S3G>; /* BT RFA1.8 LDO */
|
||||
|
||||
qcom,bt-vdd18-aon-config = <1800000 1800000 30000 1 1>;
|
||||
qcom,bt-vdd12-io-config = <1200000 1200000 30000 1 1>;
|
||||
qcom,bt-ant-ldo-config = <1800000 1800000 0 1 0>;
|
||||
qcom,bt-vdd-aon-config = <916000 1100000 0 1 0>;
|
||||
qcom,bt-vdd-rfaOp8-config = <916000 1100000 0 1 0>;
|
||||
qcom,bt-vdd-rfa1-config = <1316000 1340000 0 1 0>;
|
||||
qcom,bt-vdd-rfa2-config = <1864000 2000000 0 1 0>;
|
||||
|
||||
qcom,pdc_init_table =
|
||||
"{class: wlan_pdc, ss: rf, res: s3g.v, upval: 1856}",
|
||||
"{class: wlan_pdc, ss: rf, res: s3g.v, dwnval: 1844}",
|
||||
"{class: wlan_pdc, ss: rf, res: s7i.v, upval: 1316}",
|
||||
"{class: wlan_pdc, ss: rf, res: s7i.v, dwnval: 972}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.m, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.v, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.v, upval: 916}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.v, dwnval: 880}";
|
||||
};
|
||||
|
||||
slim_msm: slim@6C40000 {
|
||||
status = "ok";
|
||||
ngd@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
//slimbus child nodes
|
||||
slimbus: btfmslim-driver {
|
||||
compatible = "slim217,221";
|
||||
reg = <1 0>;
|
||||
qcom,btslim-address = <0x0>; /* BT SLIM EP address*/
|
||||
qcom,btslimtx-channels = <159 160>; /* slimbus FM_Tx, SCO_Tx channels */
|
||||
qcom,btslimrx-channels = <157 158>; /* slimbus SCO_A2DP_Rx A2DP_Rx */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
// FM changes
|
||||
&qupv3_se5_i2c {
|
||||
status = "ok";
|
||||
nq@64 {
|
||||
compatible = "rtc6226";
|
||||
reg = <0x64>;
|
||||
fmint-gpio = <&tlmm 84 0>;
|
||||
vdd-supply = <&L16B>;
|
||||
rtc6226,vdd-supply-voltage = <2800000 2800000>;
|
||||
rtc6226,vdd-load = <15000>;
|
||||
vio-supply = <&L15B>;
|
||||
rtc6226,vio-supply-voltage = <1800000 1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
//uart instance
|
||||
&qupv3_se14_4uart {
|
||||
status = "ok";
|
||||
};
|
||||
19
qcom/bt/sun-kiwi-bt.dts
Normal file
19
qcom/bt/sun-kiwi-bt.dts
Normal file
@@ -0,0 +1,19 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "sun-kiwi-bt.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Sun SoCs";
|
||||
compatible = "qcom,sun", "qcom,sunp", "qcom,sun-mtp", "qcom,sun-cdp";
|
||||
qcom,msm-id = <618 0x10000>, <618 0x20000>, <639 0x10000>, <639 0x20000>,
|
||||
<0x100026a 0x10000>, <0x100026a 0x20000>,
|
||||
<0x100027f 0x10000>, <0x100027f 0x20000>;
|
||||
qcom,board-id = <0x20001 0>, <0x20008 0>, <0x40015 0>;
|
||||
};
|
||||
105
qcom/bt/sun-kiwi-bt.dtsi
Normal file
105
qcom/bt/sun-kiwi-bt.dtsi
Normal file
@@ -0,0 +1,105 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interconnect/qcom,sun.h>
|
||||
|
||||
&pm8550vs_f_gpios {
|
||||
bt_uwb_en: bt_uwb_en {
|
||||
pins = "gpio3";
|
||||
function = "normal";
|
||||
input-disable;
|
||||
output-enable;
|
||||
bias-disable;
|
||||
power-source = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
cnss_bt_sw_ctrl: cnss_wlan_sw_ctrl {
|
||||
mux {
|
||||
pins = "gpio18";
|
||||
function = "wcn_sw_ctrl";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
bluetooth: bt_kiwi {
|
||||
compatible = "qcom,kiwi";
|
||||
pinctrl-names = "bt_uwb_en", "sw_ctrl";
|
||||
pinctrl-0 = <&bt_uwb_en>;
|
||||
pinctrl-1 = <&cnss_bt_sw_ctrl>;
|
||||
/* List of GPIOs to be setup for interrupt wakeup capable*/
|
||||
mpm_wake_set_gpios = <18>;
|
||||
qcom,wl-reset-gpio = <&tlmm 16 0>; /* WL_EN */
|
||||
qcom,bt-sw-ctrl-gpio = <&tlmm 18 0>; /* SW_CTRL */
|
||||
qcom,bt-reset-gpio = <&pm8550vs_f_gpios 3 0>; /* BT_EN */
|
||||
qcom,qmp = <&aoss_qmp>;
|
||||
|
||||
qcom,bt-vdd18-aon-supply = <&L3F>; /* BT VDD1.8 AON */
|
||||
qcom,bt-vdd12-io-supply = <&L2F>; /* BT VDD1.2V IO */
|
||||
qcom,bt-ant-ldo-supply = <&L6K>; /* BT ANT - AV91C_VDD */
|
||||
qcom,bt-vdd-aon-supply = <&S1D>; /* BT AON LDO*/
|
||||
qcom,bt-vdd-rfaOp8-supply = <&S1D>; /* BT RFAOp8 CMN LDO*/
|
||||
qcom,bt-vdd-rfa1-supply = <&S7I>; /* BT RFA1.2 LDO */
|
||||
qcom,bt-vdd-rfa2-supply = <&S3G>; /* BT RFA1.8 LDO */
|
||||
|
||||
qcom,bt-vdd18-aon-config = <1800000 1800000 30000 1 0>;
|
||||
qcom,bt-vdd12-io-config = <1200000 1200000 30000 1 0>;
|
||||
qcom,bt-ant-ldo-config = <1800000 1800000 0 1 0>;
|
||||
qcom,bt-vdd-aon-config = <916000 1100000 0 1 0>;
|
||||
qcom,bt-vdd-rfaOp8-config = <916000 1100000 0 1 0>;
|
||||
qcom,bt-vdd-rfa1-config = <1316000 1340000 0 1 0>;
|
||||
qcom,bt-vdd-rfa2-config = <1864000 2000000 0 1 0>;
|
||||
|
||||
qcom,pdc_init_table =
|
||||
"{class: wlan_pdc, ss: rf, res: s3g.v, upval: 1856}",
|
||||
"{class: wlan_pdc, ss: rf, res: s3g.v, dwnval: 1844}",
|
||||
"{class: wlan_pdc, ss: rf, res: s7i.v, upval: 1316}",
|
||||
"{class: wlan_pdc, ss: rf, res: s7i.v, dwnval: 972}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.m, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.v, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.v, upval: 916}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.v, dwnval: 880}";
|
||||
};
|
||||
|
||||
slim_msm: slim@6C40000 {
|
||||
status = "ok";
|
||||
ngd@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
//slimbus child nodes
|
||||
slimbus: btfmslim-driver {
|
||||
compatible = "slim217,221";
|
||||
reg = <1 0>;
|
||||
qcom,btslim-address = <0x0>; /* BT SLIM EP address*/
|
||||
qcom,btslimtx-channels = <159 160>; /* slimbus FM_Tx, SCO_Tx channels */
|
||||
qcom,btslimrx-channels = <157 158>; /* slimbus SCO_A2DP_Rx A2DP_Rx */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
// FM changes
|
||||
&qupv3_se5_i2c {
|
||||
status = "ok";
|
||||
nq@64 {
|
||||
compatible = "rtc6226";
|
||||
reg = <0x64>;
|
||||
fmint-gpio = <&tlmm 84 0>;
|
||||
vdd-supply = <&L16B>;
|
||||
rtc6226,vdd-supply-voltage = <2800000 2800000>;
|
||||
rtc6226,vdd-load = <15000>;
|
||||
vio-supply = <&L15B>;
|
||||
rtc6226,vio-supply-voltage = <1800000 1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
//uart instance
|
||||
&qupv3_se14_4uart {
|
||||
status = "ok";
|
||||
};
|
||||
21
qcom/bt/sun-peach-bt-v8.dts
Normal file
21
qcom/bt/sun-peach-bt-v8.dts
Normal file
@@ -0,0 +1,21 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "sun-peach-bt-v8.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Sun SoCs";
|
||||
compatible = "qcom,sun", "qcom,sunp";
|
||||
qcom,msm-id = <618 0x10000>, <618 0x20000>,
|
||||
<639 0x10000>, <639 0x20000>,
|
||||
<0x100026a 0x10000>, <0x100026a 0x20000>,
|
||||
<0x100027f 0x10000>, <0x100027f 0x20000>;
|
||||
qcom,board-id = <0x50001 0>, <0x40008 0>, <0x3000B 0>, <0x3000B 1>,<0x2000B 0>,
|
||||
<0x30015 0>, <0x10021 0>, <0x60008 0>, <0x40108 0>;
|
||||
};
|
||||
119
qcom/bt/sun-peach-bt-v8.dtsi
Normal file
119
qcom/bt/sun-peach-bt-v8.dtsi
Normal file
@@ -0,0 +1,119 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interconnect/qcom,sun.h>
|
||||
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||
|
||||
&pm8550ve_f_gpios {
|
||||
bt_uwb_en: bt_uwb_en {
|
||||
pins = "gpio3";
|
||||
function = "normal";
|
||||
input-disable;
|
||||
output-enable;
|
||||
bias-disable;
|
||||
power-source = <1>;
|
||||
};
|
||||
bt_fmd_clk_en: bt_fmd_clk_en {
|
||||
pins = "gpio6";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
output-disable;
|
||||
bias-disable;
|
||||
power-source = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
cnss_bt_sw_ctrl: cnss_wlan_sw_ctrl {
|
||||
mux {
|
||||
pins = "gpio18";
|
||||
function = "wcn_sw_ctrl";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
bluetooth: bt_peach {
|
||||
compatible = "qcom,peach-bt";
|
||||
nvmem-cells = <&fmd_set>, <&fmd_chg_pon>, <&fmd_cnt2_stop>;
|
||||
nvmem-cell-names = "fmd_set", "fmd_chg_pon", "fmd_cnt2_stop";
|
||||
clocks = <&rpmhcc RPMH_RF_CLK1>;
|
||||
clock-names = "bt_rf_clk1";
|
||||
qcom,peach-bt;
|
||||
pinctrl-names = "bt_uwb_en", "sw_ctrl", "bt_fmd_clk_en";
|
||||
pinctrl-0 = <&bt_uwb_en>;
|
||||
pinctrl-1 = <&cnss_bt_sw_ctrl>;
|
||||
pinctrl-2 = <&bt_fmd_clk_en>;
|
||||
/* List of GPIOs to be setup for interrupt wakeup capable*/
|
||||
mpm_wake_set_gpios = <18 9>;
|
||||
qcom,wl-reset-gpio = <&tlmm 16 0>; /* WL_EN */
|
||||
qcom,bt-sw-ctrl-gpio = <&tlmm 18 0>; /* SW_CTRL */
|
||||
qcom,bt-fmd-clk-gpio = <&pm8550ve_f_gpios 6 0>; /* FMD_CLK_CTRL */
|
||||
qcom,bt-reset-gpio = <&pm8550ve_f_gpios 3 0>; /* BT_EN */
|
||||
qcom,qmp = <&aoss_qmp>;
|
||||
|
||||
qcom,bt-vdd18-aon-supply = <&L3F>; /* VDD1P8_AON */
|
||||
qcom,bt-vdd12-io-supply = <&L2F>; /* VDD1P2_IO */
|
||||
qcom,bt-ant-ldo-supply = <&L6K>; /* AV91C_VDD Extractor */
|
||||
/* This buck is added for HW WAR */
|
||||
qcom,bt-vdd-dig-supply = <&S4D>; /* BT CX_MX LDO */
|
||||
qcom,bt-vdd-aon-supply = <&S5F>; /* RFA_CMN/AON */
|
||||
qcom,bt-vdd-rfa0p75-supply = <&S5F>; /* RFA_OP75 */
|
||||
qcom,bt-vdd-rfa1p8-supply = <&S3G>; /* RFA_1P8 */
|
||||
qcom,bt-vdd-rfa1p25-supply = <&S7I>; /* RFA_1P2 */
|
||||
|
||||
qcom,bt-vdd18-aon-config = <1800000 1800000 30000 1 1>;
|
||||
qcom,bt-vdd12-io-config = <1200000 1200000 30000 1 1>;
|
||||
qcom,bt-ant-ldo-config = <1800000 1860000 0 1 0>;
|
||||
qcom,bt-vdd-aon-config = <876000 1000000 0 1 1>;
|
||||
qcom,bt-vdd-dig-config = <560000 1036000 0 1 0>;
|
||||
qcom,bt-vdd-rfa0p75-config = <876000 1000000 0 1 0>;
|
||||
qcom,bt-vdd-rfa1p8-config = <1860000 2000000 0 1 0>;
|
||||
qcom,bt-vdd-rfa1p25-config = <1312000 1340000 0 1 0>;
|
||||
|
||||
/* WLAN regulator for FMD feature */
|
||||
qcom,bt-vdd-wlan-aon-supply = <&S4D>;
|
||||
qcom,bt-vdd-wlan-aon-config = <876000 1036000 0 0 1>;
|
||||
|
||||
qcom,pdc_init_table =
|
||||
"{class: wlan_pdc, ss: rf, res: s5f.m, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s5f.v, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s5f.v, upval: 876}",
|
||||
"{class: wlan_pdc, ss: rf, res: s5f.v, dwnval: 876}";
|
||||
};
|
||||
};
|
||||
|
||||
&swr4 {
|
||||
btswr_slave: btswr-slave {
|
||||
compatible = "qcom,btfmswr_slave";
|
||||
reg = <0x02 0x08170220>;
|
||||
};
|
||||
};
|
||||
|
||||
// FM changes
|
||||
&qupv3_se5_i2c {
|
||||
status = "ok";
|
||||
fm_rtc6226: nq@64 {
|
||||
compatible = "rtc6226";
|
||||
reg = <0x64>;
|
||||
fmint-gpio = <&tlmm 84 0>;
|
||||
vdd-supply = <&L16B>;
|
||||
rtc6226,vdd-supply-voltage = <2800000 2800000>;
|
||||
rtc6226,vdd-load = <15000>;
|
||||
vio-supply = <&L15B>;
|
||||
rtc6226,vio-supply-voltage = <1800000 1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
//uart instance
|
||||
&qupv3_se14_4uart {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
//q2spi instance
|
||||
&qupv3_se13_q2spi {
|
||||
status = "ok";
|
||||
};
|
||||
20
qcom/bt/sun-peach-bt.dts
Normal file
20
qcom/bt/sun-peach-bt.dts
Normal file
@@ -0,0 +1,20 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "sun-peach-bt.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Sun SoCs";
|
||||
compatible = "qcom,sun", "qcom,sunp";
|
||||
qcom,msm-id = <618 0x10000>, <618 0x20000>,
|
||||
<639 0x10000>, <639 0x20000>,
|
||||
<0x100026a 0x10000>, <0x100026a 0x20000>,
|
||||
<0x100027f 0x10000>, <0x100027f 0x20000>;
|
||||
qcom,board-id = <1 0>, <8 0>, <0x1000B 0>, <0x15 0>, <0x108 0>;
|
||||
};
|
||||
99
qcom/bt/sun-peach-bt.dtsi
Normal file
99
qcom/bt/sun-peach-bt.dtsi
Normal file
@@ -0,0 +1,99 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interconnect/qcom,sun.h>
|
||||
|
||||
&pm8550vs_f_gpios {
|
||||
bt_uwb_en: bt_uwb_en {
|
||||
pins = "gpio3";
|
||||
function = "normal";
|
||||
input-disable;
|
||||
output-enable;
|
||||
bias-disable;
|
||||
power-source = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
cnss_bt_sw_ctrl: cnss_wlan_sw_ctrl {
|
||||
mux {
|
||||
pins = "gpio18";
|
||||
function = "wcn_sw_ctrl";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
bluetooth: bt_peach {
|
||||
compatible = "qcom,peach-bt";
|
||||
qcom,peach-bt;
|
||||
pinctrl-names = "bt_uwb_en", "sw_ctrl";
|
||||
pinctrl-0 = <&bt_uwb_en>;
|
||||
pinctrl-1 = <&cnss_bt_sw_ctrl>;
|
||||
/* List of GPIOs to be setup for interrupt wakeup capable*/
|
||||
mpm_wake_set_gpios = <18>;
|
||||
qcom,wl-reset-gpio = <&tlmm 16 0>; /* WL_EN */
|
||||
qcom,bt-sw-ctrl-gpio = <&tlmm 18 0>; /* SW_CTRL */
|
||||
qcom,bt-reset-gpio = <&pm8550vs_f_gpios 3 0>; /* BT_EN */
|
||||
qcom,qmp = <&aoss_qmp>;
|
||||
|
||||
qcom,bt-vdd18-aon-supply = <&L3F>; /* VDD1P8_AON */
|
||||
qcom,bt-vdd12-io-supply = <&L2F>; /* VDD1P2_IO */
|
||||
qcom,bt-ant-ldo-supply = <&L6K>; /* AV91C_VDD Extractor */
|
||||
qcom,bt-vdd-dig-supply = <&S4J>; /* BT CX_MX LDO */
|
||||
qcom,bt-vdd-aon-supply = <&S4J>; /* RFA_CMN/AON */
|
||||
qcom,bt-vdd-rfa0p75-supply = <&S4J>; /* RFA_OP75 */
|
||||
qcom,bt-vdd-rfa1p8-supply = <&S3G>; /* RFA_1P8 */
|
||||
qcom,bt-vdd-rfa1p25-supply = <&S7I>; /* RFA_1P2 */
|
||||
|
||||
qcom,bt-vdd18-aon-config = <1800000 1800000 30000 1 0>;
|
||||
qcom,bt-vdd12-io-config = <1200000 1200000 30000 1 0>;
|
||||
qcom,bt-ant-ldo-config = <1800000 1860000 0 1 0>;
|
||||
qcom,bt-vdd-aon-config = <876000 1000000 0 1 0>;
|
||||
qcom,bt-vdd-dig-config = <876000 1000000 0 1 0>;
|
||||
qcom,bt-vdd-rfa0p75-config = <876000 1000000 0 1 0>;
|
||||
qcom,bt-vdd-rfa1p8-config = <1860000 2000000 0 1 0>;
|
||||
qcom,bt-vdd-rfa1p25-config = <1312000 1340000 0 1 0>;
|
||||
|
||||
qcom,pdc_init_table =
|
||||
"{class: wlan_pdc, ss: rf, res: s4j.m, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s4j.v, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s4j.v, upval: 876}",
|
||||
"{class: wlan_pdc, ss: rf, res: s4j.v, dwnval: 876}";
|
||||
};
|
||||
};
|
||||
|
||||
&swr4 {
|
||||
btswr_slave: btswr-slave {
|
||||
compatible = "qcom,btfmswr_slave";
|
||||
reg = <0x02 0x08170220>;
|
||||
};
|
||||
};
|
||||
|
||||
// FM changes
|
||||
&qupv3_se5_i2c {
|
||||
status = "ok";
|
||||
nq@64 {
|
||||
compatible = "rtc6226";
|
||||
reg = <0x64>;
|
||||
fmint-gpio = <&tlmm 84 0>;
|
||||
vdd-supply = <&L16B>;
|
||||
rtc6226,vdd-supply-voltage = <2800000 2800000>;
|
||||
rtc6226,vdd-load = <15000>;
|
||||
vio-supply = <&L15B>;
|
||||
rtc6226,vio-supply-voltage = <1800000 1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
//uart instance
|
||||
&qupv3_se14_4uart {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
//q2spi instance
|
||||
&qupv3_se13_q2spi {
|
||||
status = "ok";
|
||||
};
|
||||
19
qcom/bt/sun-wcn786x-v8.dts
Normal file
19
qcom/bt/sun-wcn786x-v8.dts
Normal file
@@ -0,0 +1,19 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "sun-wcn786x-v8.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Sun SoCs";
|
||||
compatible = "qcom,sun", "qcom,sunp";
|
||||
qcom,msm-id = <618 0x10000>, <618 0x20000>, <639 0x10000>, <639 0x20000>,
|
||||
<0x100026a 0x10000>, <0x100026a 0x20000>,
|
||||
<0x100027f 0x10000>, <0x100027f 0x20000>;
|
||||
qcom,board-id = <0x30008 0>, <0x40001 0>;
|
||||
};
|
||||
114
qcom/bt/sun-wcn786x-v8.dtsi
Normal file
114
qcom/bt/sun-wcn786x-v8.dtsi
Normal file
@@ -0,0 +1,114 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interconnect/qcom,sun.h>
|
||||
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||
|
||||
&pm8550ve_f_gpios {
|
||||
bt_en: bt_en {
|
||||
pins = "gpio3";
|
||||
function = "normal";
|
||||
input-disable;
|
||||
output-enable;
|
||||
bias-disable;
|
||||
power-source = <1>;
|
||||
};
|
||||
bt_fmd_clk_en: bt_fmd_clk_en {
|
||||
pins = "gpio6";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
output-disable;
|
||||
bias-disable;
|
||||
power-source = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
cnss_bt_sw_ctrl: cnss_wlan_sw_ctrl {
|
||||
mux {
|
||||
pins = "gpio18";
|
||||
function = "wcn_sw_ctrl";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
bluetooth: wcn786x {
|
||||
compatible = "qcom,wcn786x";
|
||||
nvmem-cells = <&fmd_set>, <&fmd_chg_pon>, <&fmd_cnt2_stop>;
|
||||
nvmem-cell-names = "fmd_set", "fmd_chg_pon", "fmd_cnt2_stop";
|
||||
clocks = <&rpmhcc RPMH_RF_CLK1>;
|
||||
clock-names = "bt_rf_clk1";
|
||||
qcom,wcn786x;
|
||||
pinctrl-names = "bt_en", "sw_ctrl", "bt_fmd_clk_en";
|
||||
pinctrl-0 = <&bt_en>;
|
||||
pinctrl-1 = <&cnss_bt_sw_ctrl>;
|
||||
pinctrl-2 = <&bt_fmd_clk_en>;
|
||||
/* List of GPIOs to be setup for interrupt wakeup capable*/
|
||||
mpm_wake_set_gpios = <18 9>;
|
||||
qcom,wl-reset-gpio = <&tlmm 16 0>; /* WL_EN */
|
||||
qcom,bt-sw-ctrl-gpio = <&tlmm 18 0>; /* SW_CTRL */
|
||||
qcom,bt-fmd-clk-gpio = <&pm8550ve_f_gpios 6 0>; /* FMD_CLK_CTRL */
|
||||
qcom,bt-reset-gpio = <&pm8550ve_f_gpios 3 0>; /* BT_EN */
|
||||
qcom,qmp = <&aoss_qmp>;
|
||||
|
||||
qcom,bt-vdd18-aon-supply = <&L3F>; /* VDD1P8_AON */
|
||||
qcom,bt-vdd12-io-supply = <&L2F>; /* VDD1P2_IO */
|
||||
qcom,bt-ant-ldo-supply = <&L6K>; /* AV91C_VDD Extractor */
|
||||
/* This buck is added for HW WAR */
|
||||
qcom,bt-vdd-dig-supply = <&S4D>; /* BT CX_MX LDO */
|
||||
qcom,bt-vdd-aon-supply = <&S5F>; /* RFA_CMN/AON */
|
||||
qcom,bt-vdd-rfa0p75-supply = <&S5F>; /* RFA_OP75 */
|
||||
qcom,bt-vdd-rfa1p8-supply = <&S3G>; /* RFA_1P8 */
|
||||
qcom,bt-vdd-rfa1p25-supply = <&S7I>; /* RFA_1P2 */
|
||||
|
||||
qcom,bt-vdd18-aon-config = <1800000 1800000 30000 1 1>;
|
||||
qcom,bt-vdd12-io-config = <1200000 1200000 30000 1 1>;
|
||||
qcom,bt-ant-ldo-config = <1800000 1860000 0 1 0>;
|
||||
qcom,bt-vdd-aon-config = <876000 1000000 0 1 1>;
|
||||
qcom,bt-vdd-dig-config = <560000 1036000 0 1 0>;
|
||||
qcom,bt-vdd-rfa0p75-config = <876000 1000000 0 1 0>;
|
||||
qcom,bt-vdd-rfa1p8-config = <1860000 2000000 0 1 0>;
|
||||
qcom,bt-vdd-rfa1p25-config = <1312000 1340000 0 1 0>;
|
||||
|
||||
/* WLAN regulator for FMD operation, and to be used only in GNG/BRH 2.0 */
|
||||
qcom,bt-vdd-wlan-aon-supply = <&S4D>;
|
||||
qcom,bt-vdd-wlan-aon-config = <876000 1036000 0 0 1>;
|
||||
|
||||
qcom,pdc_init_table =
|
||||
"{class: wlan_pdc, ss: rf, res: s5f.m, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s5f.v, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s5f.v, upval: 876}",
|
||||
"{class: wlan_pdc, ss: rf, res: s5f.v, dwnval: 876}";
|
||||
};
|
||||
};
|
||||
|
||||
&swr4 {
|
||||
btswr_slave: btswr-slave {
|
||||
compatible = "qcom,btfmswr_slave";
|
||||
reg = <0x02 0x08170220>;
|
||||
};
|
||||
};
|
||||
|
||||
// FM changes
|
||||
&qupv3_se5_i2c {
|
||||
status = "ok";
|
||||
nq@64 {
|
||||
compatible = "rtc6226";
|
||||
reg = <0x64>;
|
||||
fmint-gpio = <&tlmm 84 0>;
|
||||
vdd-supply = <&L16B>;
|
||||
rtc6226,vdd-supply-voltage = <2800000 2800000>;
|
||||
rtc6226,vdd-load = <15000>;
|
||||
vio-supply = <&L15B>;
|
||||
rtc6226,vio-supply-voltage = <1800000 1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
//uart instance
|
||||
&qupv3_se14_4uart {
|
||||
status = "ok";
|
||||
};
|
||||
19
qcom/bt/sunp-hdk-peach-bt-v8.dts
Normal file
19
qcom/bt/sunp-hdk-peach-bt-v8.dts
Normal file
@@ -0,0 +1,19 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "sunp-hdk-peach-bt-v8.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Sun SoCs HDK";
|
||||
compatible = "qcom,sunp-hdk", "qcom,sunp", "qcom,hdk";
|
||||
qcom,msm-id = <639 0x10000>, <639 0x20000>, <618 0x10000>, <618 0x20000>,
|
||||
<0x100026a 0x10000>, <0x100026a 0x20000>,
|
||||
<0x100027f 0x10000>, <0x100027f 0x20000>;
|
||||
qcom,board-id = <0x1001f 0>;
|
||||
};
|
||||
14
qcom/bt/sunp-hdk-peach-bt-v8.dtsi
Normal file
14
qcom/bt/sunp-hdk-peach-bt-v8.dtsi
Normal file
@@ -0,0 +1,14 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include "sun-peach-bt-v8.dtsi"
|
||||
|
||||
/delete-node/ &fm_rtc6226;
|
||||
|
||||
&bluetooth {
|
||||
/delete-property/ qcom,bt-ant-ldo-supply;
|
||||
/delete-property/ qcom,bt-ant-ldo-config;
|
||||
};
|
||||
19
qcom/bt/tuna-kiwi-bt.dts
Normal file
19
qcom/bt/tuna-kiwi-bt.dts
Normal file
@@ -0,0 +1,19 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "tuna-kiwi-bt.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Tuna";
|
||||
compatible = "qcom,tuna-rcm", "qcom,tunap-rcm", "qcom,rcm",
|
||||
"qcom,tuna-mtp", "qcom,tunap-mtp", "qcom,mtp",
|
||||
"qcom,tuna-atp", "qcom,tunap-atp", "qcom,atp",
|
||||
"qcom,tuna", "qcom,tunap";
|
||||
qcom,msm-id = <681 0x10000>, <655 0x10000>, <694 0x10000>;
|
||||
qcom,board-id = <21 1>, <8 2>, <8 3>, <33 0>;
|
||||
};
|
||||
109
qcom/bt/tuna-kiwi-bt.dtsi
Normal file
109
qcom/bt/tuna-kiwi-bt.dtsi
Normal file
@@ -0,0 +1,109 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/interconnect/qcom,tuna.h>
|
||||
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||
|
||||
&pm8550vs_g_gpios {
|
||||
bt_en: bt_en {
|
||||
pins = "gpio4";
|
||||
function = "normal";
|
||||
input-disable;
|
||||
output-enable;
|
||||
bias-disable;
|
||||
power-source = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
cnss_bt_sw_ctrl: cnss_wlan_sw_ctrl {
|
||||
mux {
|
||||
pins = "gpio80";
|
||||
function = "wcn_sw_ctrl";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
bluetooth: bt_kiwi {
|
||||
compatible = "qcom,kiwi";
|
||||
|
||||
clock-names = "bt_rf_clk1";
|
||||
clocks = <&rpmhcc RPMH_RF_CLK1>;
|
||||
|
||||
pinctrl-0 = <&bt_en>;
|
||||
pinctrl-1 = <&cnss_bt_sw_ctrl>;
|
||||
pinctrl-names = "bt_en", "sw_ctrl";
|
||||
|
||||
/* List of GPIOs to be setup for interrupt wakeup capable*/
|
||||
mpm_wake_set_gpios = <80>;
|
||||
qcom,wl-reset-gpio = <&tlmm 35 0>; /* WL_EN */
|
||||
qcom,bt-sw-ctrl-gpio = <&tlmm 80 0>; /* SW_CTRL */
|
||||
|
||||
qcom,bt-reset-gpio = <&pm8550vs_g_gpios 4 0>; /* WCN_BT_EN */
|
||||
|
||||
qcom,qmp = <&aoss_qmp>;
|
||||
|
||||
qcom,bt-vdd18-aon-supply = <&L3G>; /* BT VDD1.8 AON */
|
||||
qcom,bt-vdd12-io-supply = <&L2G>; /* BT VDD1.2V IO */
|
||||
qcom,bt-ant-ldo-supply = <&L6K>; /* BT ANT - AV91C_VDD */
|
||||
qcom,bt-vdd-aon-supply = <&S3B>; /* BT AON LDO*/
|
||||
qcom,bt-vdd-rfaOp8-supply = <&S3B>; /* BT RFAOp8 CMN LDO*/
|
||||
qcom,bt-vdd-rfa1-supply = <&S2B>; /* BT RFA1.2 LDO */
|
||||
qcom,bt-vdd-rfa2-supply = <&S1B>; /* BT RFA1.8 LDO */
|
||||
|
||||
qcom,bt-vdd18-aon-config = <1800000 1800000 30000 1 0>;
|
||||
qcom,bt-vdd12-io-config = <1200000 1200000 30000 1 0>;
|
||||
qcom,bt-ant-ldo-config = <1800000 2000000 0 1 0>;
|
||||
qcom,bt-vdd-aon-config = <976000 1040000 0 1 0>;
|
||||
qcom,bt-vdd-rfaOp8-config = <976000 1040000 0 1 0>;
|
||||
qcom,bt-vdd-rfa1-config = <1316000 1408000 0 1 0>;
|
||||
qcom,bt-vdd-rfa2-config = <1864000 2104000 0 1 0>;
|
||||
|
||||
qcom,pdc_init_table =
|
||||
" {class: wlan_pdc, ss: rf, res: s3b.v, upval: 976}",
|
||||
" {class: wlan_pdc, ss: rf, res: s3b.v, dwnval: 616}",
|
||||
" {class: wlan_pdc, ss: bb, res: pdc, enable: 1}";
|
||||
};
|
||||
};
|
||||
|
||||
&slim_msm {
|
||||
status = "ok";
|
||||
ngd@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
//slimbus child nodes
|
||||
slimbus: btfmslim-driver {
|
||||
compatible = "slim217,221";
|
||||
reg = <1 0>;
|
||||
qcom,btslim-address = <0x0>;
|
||||
qcom,btslimtx-channels = <159 160>;
|
||||
qcom,btslimrx-channels = <157 158>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
// FM changes
|
||||
&qupv3_se5_i2c {
|
||||
status = "ok";
|
||||
nq@64 {
|
||||
compatible = "rtc6226";
|
||||
reg = <0x64>;
|
||||
fmint-gpio = <&tlmm 29 0>;
|
||||
vdd-supply = <&L18B>;
|
||||
rtc6226,vdd-supply-voltage = <2800000 2800000>;
|
||||
rtc6226,vdd-load = <15000>;
|
||||
vio-supply = <&S1B>;
|
||||
rtc6226,vio-supply-voltage = <1856000 1856000>;
|
||||
};
|
||||
};
|
||||
|
||||
//uart instance
|
||||
&qupv3_se14_4uart {
|
||||
status = "ok";
|
||||
};
|
||||
20
qcom/bt/tuna-wcn7750-bt.dts
Normal file
20
qcom/bt/tuna-wcn7750-bt.dts
Normal file
@@ -0,0 +1,20 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "tuna-wcn7750-bt.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Tuna";
|
||||
compatible = "qcom,tuna-rcm", "qcom,tunap-rcm", "qcom,rcm",
|
||||
"qcom,tuna-mtp", "qcom,tunap-mtp", "qcom,mtp",
|
||||
"qcom,tuna-cdp", "qcom,tunap-cdp", "qcom,cdp",
|
||||
"qcom,tuna-qrd", "qcom,tunap-qrd", "qcom,qrd",
|
||||
"qcom,tuna", "qcom,tunap";
|
||||
qcom,msm-id = <681 0x10000>, <655 0x10000>, <694 0x10000>;
|
||||
qcom,board-id = <1 0>, <8 0>, <8 1>, <8 4>, <11 0>, <21 0>;
|
||||
};
|
||||
106
qcom/bt/tuna-wcn7750-bt.dtsi
Normal file
106
qcom/bt/tuna-wcn7750-bt.dtsi
Normal file
@@ -0,0 +1,106 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/interconnect/qcom,tuna.h>
|
||||
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||
|
||||
&pm8550vs_g_gpios {
|
||||
bt_en: bt_en {
|
||||
pins = "gpio4";
|
||||
function = "normal";
|
||||
input-disable;
|
||||
output-enable;
|
||||
bias-disable;
|
||||
power-source = <2>;
|
||||
};
|
||||
bt_fmd_clk_en: bt_fmd_clk_en {
|
||||
pins = "gpio3";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
output-disable;
|
||||
bias-disable;
|
||||
power-source = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
cnss_bt_sw_ctrl: cnss_wlan_sw_ctrl {
|
||||
mux {
|
||||
pins = "gpio80";
|
||||
function = "wcn_sw_ctrl";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
bluetooth: bt_tuna {
|
||||
compatible = "qcom,wcn7750-bt";
|
||||
qcom,wcn7750-bt;
|
||||
|
||||
nvmem-cell-names = "fmd_set", "fmd_chg_pon", "fmd_cnt2_stop";
|
||||
nvmem-cells = <&fmd_set>, <&fmd_chg_pon>, <&fmd_cnt2_stop>;
|
||||
|
||||
pinctrl-names = "bt_en", "sw_ctrl", "bt_fmd_clk_en";
|
||||
pinctrl-0 = <&bt_en>;
|
||||
pinctrl-1 = <&cnss_bt_sw_ctrl>;
|
||||
pinctrl-2 = <&bt_fmd_clk_en>;
|
||||
|
||||
clock-names = "bt_rf_clk1";
|
||||
clocks = <&rpmhcc RPMH_RF_CLK1>;
|
||||
|
||||
mpm_wake_set_gpios = <80>;
|
||||
qcom,wl-reset-gpio = <&tlmm 35 0>; /* WCN_WLAN_EN */
|
||||
qcom,bt-sw-ctrl-gpio = <&tlmm 80 0>; /* HST_SW_CTRL */
|
||||
qcom,bt-fmd-clk-gpio = <&pm8550vs_g_gpios 3 0>; /* FMD_CLK_EN */
|
||||
qcom,bt-reset-gpio = <&pm8550vs_g_gpios 4 0>; /* WCN_BT_EN */
|
||||
|
||||
qcom,bt-vdd-io-supply = <&L3G>; /* WCN_1P8_IO */
|
||||
qcom,bt-vdd-aon-supply = <&S3B>; /* AON LDO */
|
||||
qcom,bt-vdd-rfacmn-supply = <&S3B>; /* RF 0p8/CMN */
|
||||
qcom,bt-vdd-dig-supply = <&S3B>; /* BT LDO/BT_CX_MX */
|
||||
qcom,bt-vdd-rfa-0p8-supply = <&L6K>; /* RFA 0p8 / AV91C_VDD */
|
||||
qcom,bt-vdd-rfa1-supply = <&S1B>; /* RFA 1p7 */
|
||||
qcom,bt-vdd-rfa2-supply = <&S2B>; /* RFA 1p2 */
|
||||
qcom,bt-vdd-ipa-2p2-supply = <&S1G>; /* WCN_2p2_RFA */
|
||||
|
||||
qcom,bt-vdd-io-config = <1620000 1800000 0 1 1>;
|
||||
qcom,bt-vdd-aon-config = <900000 1040000 0 1 0>;
|
||||
qcom,bt-vdd-rfacmn-config = <900000 1040000 0 1 0>;
|
||||
qcom,bt-vdd-dig-config = <900000 1040000 0 1 0>;
|
||||
qcom,bt-vdd-rfa-0p8-config = <900000 2000000 0 1 0>;
|
||||
qcom,bt-vdd-rfa1-config = <1900000 2104000 0 1 0>;
|
||||
qcom,bt-vdd-rfa2-config = <1330000 1408000 0 1 0>;
|
||||
qcom,bt-vdd-ipa-2p2-config = <2156000 2400000 0 1 1>;
|
||||
};
|
||||
};
|
||||
|
||||
&swr4 {
|
||||
btswr_slave: btswr-slave {
|
||||
compatible = "qcom,btfmswr_slave";
|
||||
reg = <0x02 0x08170220>;
|
||||
};
|
||||
};
|
||||
|
||||
//uart instance
|
||||
&qupv3_se14_4uart {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
// FM changes
|
||||
&qupv3_se5_i2c {
|
||||
status = "ok";
|
||||
nq@64 {
|
||||
compatible = "rtc6226";
|
||||
reg = <0x64>;
|
||||
fmint-gpio = <&tlmm 29 0>;
|
||||
vdd-supply = <&L18B>;
|
||||
rtc6226,vdd-supply-voltage = <2800000 2800000>;
|
||||
rtc6226,vdd-load = <15000>;
|
||||
vio-supply = <&S1B>;
|
||||
rtc6226,vio-supply-voltage = <1856000 1856000>;
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user