Yuval Mintz f9468e8dc8 bnx2x: Prevent UDP 4-tuple configurations on older adapters ...

Configuring 4-tuple RSS hsahing for UDP
[E.g., by using `ethtool -N <interface> rx-flow-hash udp4 sdfn']
on a 57710/57711 adapter would cause it to assert as HW does not
support such a configuration.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2015-10-11 05:09:30 -07:00

..

bnx2x_cmn.c

bnx2: Fix bandwidth allocation for some MF modes

2015-08-17 10:27:57 -07:00

bnx2x_cmn.h

bnx2x: Fix vxlan endianity issue

2015-08-20 14:08:08 -07:00

bnx2x_dcb.c

bnx2x: Rebrand from 'broadcom' into 'qlogic'

2015-07-22 10:47:26 -07:00

bnx2x_dcb.h

bnx2x: Rebrand from 'broadcom' into 'qlogic'

2015-07-22 10:47:26 -07:00

bnx2x_dump.h

bnx2x: Rebrand from 'broadcom' into 'qlogic'

2015-07-22 10:47:26 -07:00

bnx2x_ethtool.c

bnx2x: Prevent UDP 4-tuple configurations on older adapters

2015-10-11 05:09:30 -07:00

bnx2x_fw_defs.h

bnx2x: Rebrand from 'broadcom' into 'qlogic'

2015-07-22 10:47:26 -07:00

bnx2x_fw_file_hdr.h

bnx2x: Rebrand from 'broadcom' into 'qlogic'

2015-07-22 10:47:26 -07:00

bnx2x_hsi.h

bnx2x: Add BD support for storage

2015-08-06 21:54:13 -07:00

bnx2x_init_ops.h

bnx2x: Rebrand from 'broadcom' into 'qlogic'

2015-07-22 10:47:26 -07:00

bnx2x_init.h

bnx2x: Rebrand from 'broadcom' into 'qlogic'

2015-07-22 10:47:26 -07:00

bnx2x_link.c

bnx2x: Add 84858 phy support

2015-07-22 10:47:26 -07:00

bnx2x_link.h

bnx2x: Rebrand from 'broadcom' into 'qlogic'

2015-07-22 10:47:26 -07:00

bnx2x_main.c

bnx2x: track vxlan port count

2015-09-17 22:32:16 -07:00

bnx2x_mfw_req.h

bnx2x: Rebrand from 'broadcom' into 'qlogic'

2015-07-22 10:47:26 -07:00

bnx2x_reg.h

bnx2x: new Multi-function mode - BD

2015-07-22 10:47:26 -07:00

bnx2x_sp.c

bnx2x: byte swap rss_key to comply to Toeplitz specs

2015-09-24 14:34:49 -07:00

bnx2x_sp.h

bnx2x: add vlan filtering offload

2015-07-29 23:24:45 -07:00

bnx2x_sriov.c

bnx2x: Correct logic for pvid configuration.

2015-08-02 17:18:24 -07:00

bnx2x_sriov.h

bnx2x: Fix compilation when CONFIG_BNX2X_SRIOV is not set

2015-07-30 09:52:18 -07:00

bnx2x_stats.c

bnx2x: Rebrand from 'broadcom' into 'qlogic'

2015-07-22 10:47:26 -07:00

bnx2x_stats.h

bnx2x: Rebrand from 'broadcom' into 'qlogic'

2015-07-22 10:47:26 -07:00

bnx2x_vfpf.c

bnx2x: add vlan filtering offload

2015-07-29 23:24:45 -07:00

bnx2x_vfpf.h

bnx2x: add vlan filtering offload

2015-07-29 23:24:45 -07:00

bnx2x.h

bnx2x: track vxlan port count

2015-09-17 22:32:16 -07:00

Makefile

bnx2x: Segregate SR-IOV code

2013-01-07 19:49:14 -08:00