abf1e27fbb
This patch renames nodes in dts fils for MPC5200b files to prepare for refactoring of these files later. When refactoring it will be easier to verify the results if the node names aren't changing at the same time. Signed-off-by: John Bonesio <bones@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
317 lines
7.8 KiB
Plaintext
317 lines
7.8 KiB
Plaintext
/*
|
|
* Freescale Media5200 board Device Tree Source
|
|
*
|
|
* Copyright 2009 Secret Lab Technologies Ltd.
|
|
* Grant Likely <grant.likely@secretlab.ca>
|
|
* Steven Cavanagh <scavanagh@secretlab.ca>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "fsl,media5200";
|
|
compatible = "fsl,media5200";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
|
|
aliases {
|
|
console = &console;
|
|
ethernet0 = ð0;
|
|
};
|
|
|
|
chosen {
|
|
linux,stdout-path = &console;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,5200@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
d-cache-line-size = <32>;
|
|
i-cache-line-size = <32>;
|
|
d-cache-size = <0x4000>; // L1, 16K
|
|
i-cache-size = <0x4000>; // L1, 16K
|
|
timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot
|
|
bus-frequency = <132000000>; // 132 MHz
|
|
clock-frequency = <396000000>; // 396 MHz
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x08000000>; // 128MB RAM
|
|
};
|
|
|
|
soc@f0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc5200b-immr";
|
|
ranges = <0 0xf0000000 0x0000c000>;
|
|
reg = <0xf0000000 0x00000100>;
|
|
bus-frequency = <132000000>;// 132 MHz
|
|
system-frequency = <0>; // from bootloader
|
|
|
|
cdm@200 {
|
|
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
|
|
reg = <0x200 0x38>;
|
|
};
|
|
|
|
mpc5200_pic: interrupt-controller@500 {
|
|
// 5200 interrupts are encoded into two levels;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
|
|
reg = <0x500 0x80>;
|
|
};
|
|
|
|
timer@600 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
reg = <0x600 0x10>;
|
|
interrupts = <1 9 0>;
|
|
fsl,has-wdt;
|
|
};
|
|
|
|
timer@610 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
reg = <0x610 0x10>;
|
|
interrupts = <1 10 0>;
|
|
};
|
|
|
|
timer@620 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
reg = <0x620 0x10>;
|
|
interrupts = <1 11 0>;
|
|
};
|
|
|
|
timer@630 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
reg = <0x630 0x10>;
|
|
interrupts = <1 12 0>;
|
|
};
|
|
|
|
timer@640 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
reg = <0x640 0x10>;
|
|
interrupts = <1 13 0>;
|
|
};
|
|
|
|
timer@650 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
reg = <0x650 0x10>;
|
|
interrupts = <1 14 0>;
|
|
};
|
|
|
|
timer@660 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
reg = <0x660 0x10>;
|
|
interrupts = <1 15 0>;
|
|
};
|
|
|
|
timer@670 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
reg = <0x670 0x10>;
|
|
interrupts = <1 16 0>;
|
|
};
|
|
|
|
rtc@800 { // Real time clock
|
|
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
|
|
reg = <0x800 0x100>;
|
|
interrupts = <1 5 0 1 6 0>;
|
|
};
|
|
|
|
can@900 {
|
|
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
|
interrupts = <2 17 0>;
|
|
reg = <0x900 0x80>;
|
|
};
|
|
|
|
can@980 {
|
|
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
|
interrupts = <2 18 0>;
|
|
reg = <0x980 0x80>;
|
|
};
|
|
|
|
gpio_simple: gpio@b00 {
|
|
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
|
|
reg = <0xb00 0x40>;
|
|
interrupts = <1 7 0>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpio_wkup: gpio@c00 {
|
|
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
|
|
reg = <0xc00 0x40>;
|
|
interrupts = <1 8 0 0 3 0>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
spi@f00 {
|
|
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
|
|
reg = <0xf00 0x20>;
|
|
interrupts = <2 13 0 2 14 0>;
|
|
};
|
|
|
|
usb@1000 {
|
|
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
|
|
reg = <0x1000 0x100>;
|
|
interrupts = <2 6 0>;
|
|
};
|
|
|
|
dma-controller@1200 {
|
|
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
|
|
reg = <0x1200 0x80>;
|
|
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
|
3 4 0 3 5 0 3 6 0 3 7 0
|
|
3 8 0 3 9 0 3 10 0 3 11 0
|
|
3 12 0 3 13 0 3 14 0 3 15 0>;
|
|
};
|
|
|
|
xlb@1f00 {
|
|
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
|
|
reg = <0x1f00 0x100>;
|
|
};
|
|
|
|
// PSC6 in uart mode
|
|
console: psc@2c00 { // PSC6
|
|
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
|
cell-index = <5>;
|
|
port-number = <0>; // Logical port assignment
|
|
reg = <0x2c00 0x100>;
|
|
interrupts = <2 4 0>;
|
|
};
|
|
|
|
eth0: ethernet@3000 {
|
|
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
|
|
reg = <0x3000 0x400>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <2 5 0>;
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
mdio@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
|
|
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
|
|
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
|
|
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
ata@3a00 {
|
|
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
|
|
reg = <0x3a00 0x100>;
|
|
interrupts = <2 7 0>;
|
|
};
|
|
|
|
i2c@3d00 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
|
reg = <0x3d00 0x40>;
|
|
interrupts = <2 15 0>;
|
|
};
|
|
|
|
i2c@3d40 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
|
reg = <0x3d40 0x40>;
|
|
interrupts = <2 16 0>;
|
|
};
|
|
|
|
sram@8000 {
|
|
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
|
|
reg = <0x8000 0x4000>;
|
|
};
|
|
};
|
|
|
|
pci@f0000d00 {
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
|
|
reg = <0xf0000d00 0x100>;
|
|
interrupt-map-mask = <0xf800 0 0 7>;
|
|
interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
|
|
0xc000 0 0 2 &media5200_fpga 0 3
|
|
0xc000 0 0 3 &media5200_fpga 0 4
|
|
0xc000 0 0 4 &media5200_fpga 0 5
|
|
|
|
0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot
|
|
0xc800 0 0 2 &media5200_fpga 0 4
|
|
0xc800 0 0 3 &media5200_fpga 0 5
|
|
0xc800 0 0 4 &media5200_fpga 0 2
|
|
|
|
0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI
|
|
0xd000 0 0 2 &media5200_fpga 0 5
|
|
|
|
0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
|
|
>;
|
|
clock-frequency = <0>; // From boot loader
|
|
interrupts = <2 8 0 2 9 0 2 10 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
bus-range = <0 0>;
|
|
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
|
|
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
|
|
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
|
|
};
|
|
|
|
localbus {
|
|
compatible = "fsl,mpc5200b-lpb","simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
|
|
ranges = < 0 0 0xfc000000 0x02000000
|
|
1 0 0xfe000000 0x02000000
|
|
2 0 0xf0010000 0x00010000
|
|
3 0 0xf0020000 0x00010000 >;
|
|
|
|
flash@0,0 {
|
|
compatible = "amd,am29lv28ml", "cfi-flash";
|
|
reg = <0 0x0 0x2000000>; // 32 MB
|
|
bank-width = <4>; // Width in bytes of the flash bank
|
|
device-width = <2>; // Two devices on each bank
|
|
};
|
|
|
|
flash@1,0 {
|
|
compatible = "amd,am29lv28ml", "cfi-flash";
|
|
reg = <1 0 0x2000000>; // 32 MB
|
|
bank-width = <4>; // Width in bytes of the flash bank
|
|
device-width = <2>; // Two devices on each bank
|
|
};
|
|
|
|
media5200_fpga: fpga@2,0 {
|
|
compatible = "fsl,media5200-fpga";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>; // 0:bank 1:id; no type field
|
|
reg = <2 0 0x10000>;
|
|
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
interrupts = <0 0 3 // IRQ bank 0
|
|
1 1 3>; // IRQ bank 1
|
|
};
|
|
|
|
uart@3,0 {
|
|
compatible = "ti,tl16c752bpt";
|
|
reg = <3 0 0x10000>;
|
|
interrupt-parent = <&media5200_fpga>;
|
|
interrupts = <0 0 0 1>; // 2 irqs
|
|
};
|
|
};
|
|
};
|