samsung_sm8750/android_kernel_samsung_sm8750
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
65a1eeb079333e9f547e710e2efabae487fa5c51
android_kernel_samsung_sm8750/drivers/spi/q2spi-msm.h
nessi 4d134a1294 Add samsung specific changes
2025-08-11 14:29:00 +02:00

772 lines
23 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0-only
*
* Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#ifndef _SPI_Q2SPI_MSM_H_
#define _SPI_Q2SPI_MSM_H_
#include <linux/cdev.h>
#include <linux/idr.h>
#include <linux/ipc_logging.h>
#include <linux/kthread.h>
#include <linux/msm_gpi.h>
#include <linux/pm_runtime.h>
#include <linux/poll.h>
#include <linux/soc/qcom/geni-se.h>
#include <linux/qcom-geni-se-common.h>
#include <linux/timer.h>
#include <linux/types.h>
#include <uapi/linux/q2spi/q2spi.h>
#include "q2spi-gsi.h"
#define GENI_SE_Q2SPI_PROTO (0xE)
#define DATA_WORD_LEN 4
#define SMA_BUF_SIZE (4096)
#define MAX_CR_SIZE 24 /* Max CR size is 24 bytes per CR */
#define MAX_RX_CRS 4
#define RX_DMA_CR_BUF_SIZE (MAX_CR_SIZE * MAX_RX_CRS)
#define Q2SPI_MAX_BUF 2
#define Q2SPI_MAX_RESP_BUF 40
#define Q2SPI_RESP_BUF_SIZE SMA_BUF_SIZE
#define XFER_TIMEOUT_OFFSET (250)
#define Q2SPI_RESPONSE_WAIT_TIMEOUT (1000)
#define EXT_CR_TIMEOUT_MSECS (50)
#define TIMEOUT_MSECONDS 10 /* 10 milliseconds */
#define RETRIES 1
#define Q2SPI_MAX_DATA_LEN 4096
#define Q2SPI_MAX_TX_RETRIES 3
/* Host commands */
#define HC_DB_REPORT_LEN_READ 1
#define HC_DB_REPORT_BODY_READ 2
#define HC_ABORT 3
#define HC_DATA_READ 5
#define HC_DATA_WRITE 6
#define HC_SMA_READ 5
#define HC_SMA_WRITE 6
#define HC_SOFT_RESET 0xF
#define CM_FLOW 1
#define MC_FLOW 0
#define CLIENT_INTERRUPT 1
#define SEGMENT_LST 1
#define LOCAL_REG_ACCESS 0
#define SYSTEM_MEMORY_ACCESS 1
#define CLIENT_ADDRESS 1
#define NO_CLIENT_ADDRESS 0
#define HC_SOFT_RESET_FLAGS 0xF
#define HC_SOFT_RESET_CODE 0x2
/* Client Requests */
#define ADDR_LESS_WR_ACCESS 0x3
#define ADDR_LESS_RD_ACCESS 0x4
#define BULK_ACCESS_STATUS 0x8
#define CR_EXTENSION 0xF
#define CR_ADDR_LESS_WR 0xE3
#define CR_ADDR_LESS_RD 0xF4
#define CR_BULK_ACCESS_STATUS 0x98
#define Q2SPI_HEADER_LEN 7 /* 7 bytes header excluding checksum we use in SW */
#define DMA_Q2SPI_SIZE 2048
#define MAX_DW_LEN_1 4 /* 4DWlen */
#define MAX_DW_LEN_2 1024 /* for 1K DWlen */
#define CS_LESS_MODE 0
#define INTR_HIGH_POLARITY 1
#define MAX_TX_SG (3)
#define NUM_Q2SPI_XFER (10)
#define Q2SPI_START_TID_ID (0)
#define Q2SPI_END_TID_ID (8)
/* Q2SPI specific SE GENI registers */
#define IO_MACRO_IO3_DATA_IN_SEL_MASK GENMASK(15, 14)
#define IO_MACRO_IO3_DATA_IN_SEL_SHIFT 14
#define IO_MACRO_IO3_DATA_IN_SEL 1
#define SE_SPI_TRANS_CFG 0x25c
#define CS_TOGGLE BIT(1)
#define SPI_NOT_USED_CFG1 BIT(2)
#define SE_SPI_PRE_POST_CMD_DLY 0x274
#define SPI_DELAYS_COUNTERS 0x278
#define M_GP_CNT4_TAN 0
#define M_GP_CNT4_TAN_MASK GENMASK(9, 0)
#define M_GP_CNT5_TE2D GENMASK(19, 10)
#define M_GP_CNT5_TE2D_SHIFT 10
#define M_GP_CNT6_CN GENMASK(29, 20)
#define M_GP_CNT6_CN_SHIFT 20
#define SE_GENI_CFG_REG95 0x27C
#define M_GP_CNT7 GENMASK(9, 0)
#define M_GP_CNT7_TSN 0
#define SPI_INTER_WORDS_DLY 0
#define SPI_CS_CLK_DLY 0x80 /* 80 from VI SW, 128 from ganges SW */
#define SPI_PIPE_DLY_TPM 0x320 /* 800 from VI SW */
#define SE_GENI_CFG_REG103 0x29C
#define S_GP_CNT5 GENMASK(19, 10)
#define S_GP_CNT5_SHIFT 10
#define S_GP_CNT5_TDN 0
#define SE_GENI_CFG_REG104 0x2A0
#define S_GP_CNT7 GENMASK(9, 0)
#define S_GP_CNT7_SSN 0x80 /* 80 from VI SW, 128 from ganges SW */
#define M_GP_CNT6_CN_DELAY 0x50 /*63 from VI SW, trying with 80 from SW */
#define SE_SPI_WORD_LEN 0x268
#define WORD_LEN_MSK GENMASK(9, 0)
#define MIN_WORD_LEN 4
#define NUMBER_OF_DATA_LINES GENMASK(1, 0)
#define PARAM_14 BIT(14)
#define SE_GENI_CGC_CTRL 0x28
#define SE_GENI_CFG_SEQ_START 0x84
#define SE_GENI_CFG_STATUS 0x88
#define SE_UART_TX_TRANS_CFG 0x25C
#define CFG_SEQ_DONE BIT(1)
#define SPI_CS_CLK_DL 0
#define SPI_PRE_POST_CMD_DLY 0
#define SE_SPI_CPHA 0x224
#define CPHA BIT(0)
#define SE_SPI_CPOL 0x230
#define CPOL BIT(2)
#define SPI_LSB_TO_MSB 0
#define SPI_MSB_TO_LSB 1
#define SE_SPI_TX_TRANS_LEN 0x26c
#define SE_SPI_RX_TRANS_LEN 0x270
#define TRANS_LEN_MSK GENMASK(23, 0)
/* GENI General Purpose Interrupt Status */
#define M_GP_IRQ_ERR_START_BIT 5
#define M_GP_IRQ_MASK GENMASK(12, 5)
#define Q2SPI_PWR_ON_NACK BIT(0)
#define Q2SPI_HDR_FAIL BIT(1)
#define Q2SPI_HCR_FAIL BIT(2)
#define Q2SPI_CHECKSUM_FAIL BIT(3)
#define Q2SPI_START_SEQ_TIMEOUT BIT(4)
#define Q2SPI_STOP_SEQ_TIMEOUT BIT(5)
#define Q2SPI_WAIT_PHASE_TIMEOUT BIT(6)
#define Q2SPI_CLIENT_EN_NOT_DETECTED BIT(7)
/* HRF FLOW Info */
#define HRF_ENTRY_OPCODE 3
#define HRF_ENTRY_TYPE 3
#define HRF_ENTRY_FLOW 0
#define HRF_ENTRY_PARITY 0
#define HRF_ENTRY_DATA_LEN 16 /* HRF entry always has DW=3 */
#define Q2SPI_CLIENT_SLEEP_BYTE 0xFE
#define Q2SPI_SLEEP_OPCODE 0xF
#define LRA_SINGLE_REG_LENGTH 4
/* M_CMD OP codes for Q2SPI */
#define Q2SPI_TX_ONLY (1)
#define Q2SPI_RX_ONLY (2)
#define Q2SPI_TX_RX (7)
/* M_CMD params for Q2SPI */
#define PRE_CMD_DELAY BIT(0)
#define TIMESTAMP_BEFORE BIT(1)
#define TIMESTAMP_AFTER BIT(3)
#define POST_CMD_DELAY BIT(4)
#define Q2SPI_MODE GENMASK(11, 8)
#define Q2SPI_MODE_SHIFT 8
#define SINGLE_SDR_MODE 0
#define Q2SPI_CMD BIT(14)
#define CS_MODE CS_LESS_MODE
#define Q2SPI_INTR_POL INTR_HIGH_POLARITY
#define CR_BULK_DATA_SIZE 1
#define CR_DMA_DATA_SIZE 7
#define CR_EXTENSION_DATA_BYTES 5 /* 1 for EXTID + 4 Bytes for one 1DW */
#define Q2SPI_HRF_SLEEP_CMD 0x100
#define Q2SPI_AUTOSUSPEND_DELAY (XFER_TIMEOUT_OFFSET + 50)
#define Q2SPI_SLAVE_SLEEP_TIME_MSECS 100
#define Q2SPI_SOFT_RESET_CMD_BIT BIT(0)
#define Q2SPI_SLEEP_CMD_BIT BIT(1)
#define Q2SPI_CR_TRANSACTION_ERROR 1
#define PINCTRL_DEFAULT "default"
#define PINCTRL_ACTIVE "active"
#define PINCTRL_SLEEP "sleep"
#define PINCTRL_SHUTDOWN "shutdown"
/* Max number of Q2SPI devices */
#define Q2SPI_MAX_DEV 2
#define Q2SPI_DEV_NAME_MAX_LEN 64
#define Q2SPI_RESP_BUF_RETRIES (100)
#define Q2SPI_INFO(q2spi_ptr, x...) do { \
if (q2spi_ptr) { \
ipc_log_string(q2spi_ptr->ipc, x); \
if (q2spi_ptr->dev) \
q2spi_trace_log(q2spi_ptr->dev, x); \
pr_info(x); \
} \
} while (0)
#define Q2SPI_DEBUG(q2spi_ptr, x...) do { \
if (q2spi_ptr) { \
GENI_SE_DBG(q2spi_ptr->ipc, false, q2spi_ptr->dev, x); \
if (q2spi_ptr->dev) \
q2spi_trace_log(q2spi_ptr->dev, x); \
} \
} while (0)
#define Q2SPI_ERROR(q2spi_ptr, x...) do { \
if (q2spi_ptr) { \
GENI_SE_ERR(q2spi_ptr->ipc, true, q2spi_ptr->dev, x); \
if (q2spi_ptr->dev) \
q2spi_trace_log(q2spi_ptr->dev, x); \
} \
} while (0)
#define DATA_BYTES_PER_LINE (64)
#define Q2SPI_DATA_DUMP_SIZE (16)
static unsigned int q2spi_max_speed;
/* global storage for device Major number */
static int q2spi_cdev_major;
/* global variable for system restart case */
static bool q2spi_sys_restart;
enum abort_code {
TERMINATE_CMD = 0,
ERR_DUPLICATE_ID = 1,
ERR_NOT_VALID = 2,
ERR_ACCESS_BLOCKED = 3,
ERR_DWLEN = 4,
OTHERS = 5,
};
enum q2spi_pkt_state {
NOT_IN_USE = 0,
IN_USE = 1,
DATA_AVAIL = 2,
IN_DELETION = 3,
DELETED = 4,
};
enum q2spi_cr_hdr_type {
CR_HDR_BULK = 1,
CR_HDR_VAR3 = 2,
CR_HDR_EXT = 3,
};
struct q2spi_mc_hrf_entry {
u8 cmd:4;
u8 flow:1;
u8 type:2;
u8 parity:1;
u8 resrv_0:4;
u8 flow_id:4;
u8 resrv_1:4;
u8 dwlen_part1:4;
u8 dwlen_part2:8;
u8 dwlen_part3:8;
u8 arg1:8;
u8 arg2:8;
u8 arg3:8;
u8 reserved[8];
};
/**
* struct q2spi_ch_header structure of cr header
* @flow: flow direction of cr hdr, 1: CM flow, 0: MC flow
*/
struct q2spi_cr_header {
u8 cmd:4;
u8 flow:1;
u8 type:2;
u8 parity:1;
};
/**
* q2spi_ext_cr_header - structure of extension CR header
* @cmd: opcode command for CR Extension
* @dw_len: specifies how many bytes are in this CR body
* @parity: odd parity
*/
struct q2spi_ext_cr_header {
u8 cmd:4;
u8 dw_len:2;
u8 rsvd:1;
u8 parity:1;
};
struct q2spi_client_bulk_access_pkt {
u8 cmd:4;
u8 flow:1;
u8 rsvd:2;
u8 parity:1;
u8 status:4;
u8 flow_id:4;
u8 reserved[2];
};
struct q2spi_client_dma_pkt {
u8 seg_len:4;
u8 flow_id:4;
u8 interrupt:1;
u8 seg_last:1;
u8 channel:2;
u8 dw_len_part1:4;
u8 dw_len_part2:8;
u8 dw_len_part3:8;
u8 arg1:8;
u8 arg2:8;
u8 arg3:8;
};
struct q2spi_host_variant1_pkt {
u8 cmd:4;
u8 flow:1;
u8 interrupt:1;
u8 seg_last:1;
u8 rsvd:1;
u8 dw_len:2;
u8 access_type:1;
u8 address_mode:1;
u8 flow_id:4;
u8 reg_offset;
u8 reserved[4];
u8 data_buf[16];
u8 status;
};
struct q2spi_host_variant4_5_pkt {
u8 cmd:4;
u8 flow:1;
u8 interrupt:1;
u8 seg_last:1;
u8 rsvd:1;
u8 dw_len_part1:2;
u8 access_type:1;
u8 address_mode:1;
u8 flow_id:4;
u8 dw_len_part2;
u8 rsvd_1[4];
u8 data_buf[4096];
u8 status;
};
struct q2spi_host_abort_pkt {
u8 cmd:4;
u8 rsvd:4;
u8 code:4;
u8 flow_id:4;
u8 reserved[5];
};
struct q2spi_host_soft_reset_pkt {
u8 cmd:4;
u8 flags:4;
u8 code:4;
u8 rsvd:4;
u8 rsvd_1[5];
};
enum cr_var_type {
VARIANT_T_3 = 1, /* T:3 DMA CR type */
VARIANT_T_4 = 2,
VARIANT_T_5 = 3,
};
enum var_type {
VARIANT_1_LRA = 1,
VARIANT_1_HRF = 2,
VARIANT_2 = 3,
VARIANT_3 = 4,
VARIANT_4 = 5,
VARIANT_5 = 6,
VARIANT_5_HRF = 7,
VAR_ABORT = 8,
VAR_SOFT_RESET = 9,
};
/**
* struct q2spi_chrdev - structure for character device
* q2spi_dev: q2spi device
* @cdev: cdev pointer
* @major: major number of q2spi device
* @minor: minor number of q2spi device
* @dev: basic device structure.
* @dev_name: name of the device
* @class_dev: pointer to char dev class
* @q2spi_class: pointer to q2spi class
*/
struct q2spi_chrdev {
dev_t q2spi_dev;
struct cdev cdev[Q2SPI_MAX_DEV];
int major;
int minor;
struct device *dev;
char dev_name[Q2SPI_DEV_NAME_MAX_LEN];
struct device *class_dev;
struct class *q2spi_class;
};
/**
* struct q2spi_dma_transfer - q2spi transfer dmadata
* @tx_buf: TX data buffer
* @rx_buf: RX data buffer
* @tx_len: length of the Tx transfer
* @rx_len: length of the rx transfer
* @tx_dma: dma pointer for Tx transfer
* @rx_dma: dma pointer for Rx transfer
* @cmd: q2spi cmd type
* @tid: Unique Transaction ID. Used for q2spi messages.
* @queue: struct list head
* @q2spi_pkt: pointer to q2spi_pkt
*/
struct q2spi_dma_transfer {
void *tx_buf;
void *rx_buf;
unsigned int tx_len;
unsigned int rx_len;
unsigned int tx_data_len;
unsigned int rx_data_len;
dma_addr_t tx_dma;
dma_addr_t rx_dma;
enum cmd_type cmd;
int tid;
struct list_head queue;
struct q2spi_packet *q2spi_pkt;
};
/**
* struct q2spi_geni - structure to store Q2SPI GENI information
*
* @wrapper_dev: qupv3 wrapper device pointer
* @dev: q2spi device pointer
* @base: pointer to ioremap()'d registers
* @m_ahb_clk: master ahb clock for the controller
* @s_ahb_clk: slave ahb clock for the controller
* @se_clk: serial engine clock
* @geni_pinctrl: pin-controller's instance
* @geni_gpio_default: default state pin control
* @geni_gpio_active: active state pin control
* @geni_gpio_sleep: sleep state pin control
* @geni_gpio_shutdown: shutdown state pin control
* q2spi_chrdev: cdev structure
* @geni_se: stores info parsed from device tree
* @gsi: stores GSI structure information
* @db_xfer: reference to q2spi_dma_transfer structure for doorbell
* @req: reference to q2spi request structure
* @c_req: reference to q2spi client request structure
* @setup_config0: used to mark config0 setup completion
* @irq: IRQ of the SE
* @tx_queue_list: list for HC packets
* @kworker: kthread worker to process the q2spi requests
* @send_messages: work function to process the q2spi requests
* @gsi_lock: lock to protect gsi operations
* @port_lock: lock to protect q2spi open, release and transfer operations
* @txn_lock: lock to protect transfer id allocation and free
* @queue_lock: lock to protect HC operations
* @send_msgs_lock: lock to protect q2spi_send_messages
* @cr_queue_lock: lock to protect CR operations
* @geni_resource_lock: lock to protect geni resource on/off
* @max_speed_hz: stores maxspeed of the SCLK frequency
* @cur_speed_hz: stores maxspeed of the SCLK frequency
* @oversampling: stores sampling value based on major and minor version
* @xfer_mode: stored mode of transfer
* @curr_xfer_mode: stored current mode of transfer
* @gsi_mode: flag for gsi mode
* @tx_cb: completion for tx dma
* @rx_cb: completion for rx dma
* @db_rx_cb: completion for doobell rx dma
* @restart_handler: notifier callback for restart
* @wait_for_ext_cr: completion for extension cr
* @rx_avail: used to notify the client for available rx data
* @tid_idr: tid id allocator
* @readq: waitqueue for rx data
* @hrf_flow: flag to indicate HRF flow
* @db_q2spi_pkt: pointer to doorbell q2spi packet
* @db_setup_wait: wait for doorbell setup done
* @var1_buf: virtual pointer for variant1
* @var1_dma_buf: physical dma pointer for variant1
* @var1_buf_used: pointer to store variant1 buffer used
* @var5_buf: virtual pointer for variant5
* @var5_dma_buf: physical dma pointer for variant5
* @var5_buf_used: pointer to store variant5 buffer used
* @cr_buf: virtual pointer for CR
* @cr_dma_buf: physical dma pointer for CR
* @cr_buf_used: pointer to store CR buffer used
* @bulk_buf: virtual pointer for bulk buffer
* @bulk_dma_buf: physical dma pointer for bulk buffer
* @bulk_buf_used: pointer to store bulk buffer used
* @resp_buf: virtual pointer for resp buffer
* @resp_dma_buf: physical dma pointer for resp buffer
* @resp_buf_used: pointer to store resp buffer used
* @sma_wait: completion for SMA
* @ipc: pointer for ipc
* @q2spi_doorbell_work: work to queue for doorbell process
* @doorbell_wq: workqueue pointer for doorbell
* @q2spi_wakeup_work: work to queue for wakeup process
* @wakeup_wq: workqueue pointer for wakeup
* @q2spi_sleep_work: work to queue for client sleep
* @sleep_wq: workqueue pointer for client_sleep
* @hw_state_is_bad: used when HW is in un-recoverable state
* @max_dump_data_size: max size of data to be dumped as part of dump_ipc function
* @doorbell_pending: Set when independent doorbell CR received
* @retry: used when independent doorbell processing is pending to retry the request from host
* @alloc_count: reflects count of memory allocations done by q2spi_kzalloc
* @sma_wr_pending: set when previous CR SMA write packet pending
* @sma_rd_pending: set when previous CR SMA read packet pending
* @resources_on: flag which reflects geni resources are turned on/off
* @port_release: reflects if q2spi port is being closed
* @is_suspend: reflects if q2spi driver is in system suspend
* @m_clk_cfg: stires SER_M_CLK_CFG value to be retain after resources on
* @doorbell_irq: doorbell irq
* @wake_clk_gpio: GPIO for clk pin
* @wake_mosi_gpio: GPIO for mosi pin
* @slave_sleep_timer: used for initiating sleep command to slave
* @slave_in_sleep: reflects sleep command sent to slave
* @sys_mem_read_in_progress: reflects system memory read request is in progress
* @q2spi_cr_txn_err: reflects Q2SPI_CR_TRANSACTION_ERROR in CR body
* @q2spi_sleep_cmd_enable: reflects start sending the sleep command to slave
* @q2spi_cr_hdr_err: reflects CR Header incorrect in CR Header
* @is_start_seq_fail: start sequence fail due to slave not responding
* @wait_comp_start_fail: completion for transfer callback during start sequence failure
*/
struct q2spi_geni {
struct device *wrapper_dev;
struct device *dev;
void __iomem *base;
struct clk *m_ahb_clk;
struct clk *s_ahb_clk;
struct clk *se_clk;
struct pinctrl *geni_pinctrl;
struct pinctrl_state *geni_gpio_default;
struct pinctrl_state *geni_gpio_active;
struct pinctrl_state *geni_gpio_sleep;
struct pinctrl_state *geni_gpio_shutdown;
struct q2spi_chrdev chrdev;
struct geni_se se;
struct q2spi_gsi *gsi;
struct q2spi_dma_transfer *db_xfer;
struct q2spi_request *req;
struct q2spi_client_request *c_req;
bool setup_config0;
int irq;
struct list_head tx_queue_list;
struct kthread_worker *kworker;
struct kthread_work send_messages;
/* lock to protect gsi operations one at a time */
struct mutex gsi_lock;
/* lock to protect port open, close and transfer operations */
struct mutex port_lock;
/* lock to protect transfer id allocation and free */
spinlock_t txn_lock;
/* lock to protect HC operations one at a time*/
struct mutex queue_lock;
/* lock to protect q2spi_send_messages */
struct mutex send_msgs_lock;
/* lock to protect CR of operations one at a time*/
spinlock_t cr_queue_lock;
/* lock to protect geni resource on/off */
struct mutex geni_resource_lock;
u32 max_speed_hz;
u32 cur_speed_hz;
int oversampling;
int xfer_mode;
int cur_xfer_mode;
bool gsi_mode; /* GSI Mode */
struct completion tx_cb;
struct completion rx_cb;
struct completion db_rx_cb;
struct notifier_block restart_handler;
struct completion wait_for_ext_cr;
atomic_t rx_avail;
struct idr tid_idr;
wait_queue_head_t readq;
void *rx_buf;
dma_addr_t rx_dma;
bool hrf_flow;
struct q2spi_packet *db_q2spi_pkt;
struct completion db_setup_wait;
void *var1_buf[Q2SPI_MAX_BUF];
dma_addr_t var1_dma_buf[Q2SPI_MAX_BUF];
void *var1_buf_used[Q2SPI_MAX_BUF];
void *var5_buf[Q2SPI_MAX_BUF];
dma_addr_t var5_dma_buf[Q2SPI_MAX_BUF];
void *var5_buf_used[Q2SPI_MAX_BUF];
void *cr_buf[Q2SPI_MAX_BUF];
dma_addr_t cr_dma_buf[Q2SPI_MAX_BUF];
void *cr_buf_used[Q2SPI_MAX_BUF];
void *bulk_buf[Q2SPI_MAX_BUF];
dma_addr_t bulk_dma_buf[Q2SPI_MAX_BUF];
void *bulk_buf_used[Q2SPI_MAX_BUF];
void *resp_buf[Q2SPI_MAX_RESP_BUF];
dma_addr_t resp_dma_buf[Q2SPI_MAX_RESP_BUF];
void *resp_buf_used[Q2SPI_MAX_RESP_BUF];
dma_addr_t dma_buf;
struct completion sma_wait;
void *ipc;
struct work_struct q2spi_doorbell_work;
struct workqueue_struct *doorbell_wq;
struct work_struct q2spi_wakeup_work;
struct workqueue_struct *wakeup_wq;
struct work_struct q2spi_sleep_work;
struct workqueue_struct *sleep_wq;
bool doorbell_setup;
struct qup_q2spi_cr_header_event q2spi_cr_hdr_event;
wait_queue_head_t read_wq;
bool hw_state_is_bad;
int max_data_dump_size;
atomic_t doorbell_pending;
atomic_t retry;
atomic_t alloc_count;
atomic_t sma_wr_pending;
atomic_t sma_rd_pending;
struct completion sma_wr_comp;
struct completion sma_rd_comp;
bool resources_on;
bool port_release;
atomic_t is_suspend;
u32 m_clk_cfg;
int doorbell_irq;
int wake_clk_gpio;
int wake_mosi_gpio;
struct timer_list slave_sleep_timer;
atomic_t slave_in_sleep;
bool sys_mem_read_in_progress;
bool q2spi_cr_txn_err;
bool q2spi_sleep_cmd_enable;
bool q2spi_cr_hdr_err;
bool is_start_seq_fail;
struct completion wait_comp_start_fail;
};
/**
* struct q2spi_cr_packet - structure for extension CR packet
*
* @cmd: opcode command for extension CR
* @dw_len: specifies how many bytes are in this CR body
* @parity: Odd parity
* @extid: Extension ID for this CR
* @byte: CR body bytes
*/
struct q2spi_client_extension_pkt {
u8 cmd:4;
u8 dw_len:1;
u8 reserved:1;
u8 parity:1;
u8 extid:8;
u8 byte[16];
};
/**
* struct q2spi_cr_packet - structure for Q2SPI CR packet
*
* @cr_hdr: array of q2spi_cr_header structures
* @cr_hdr: array of q2spi_ext_cr_header structures
* @var3_pkt: pointer for q2spi_client_dma_pkt structure
* @bulk_pkt: pointer for q2spi_client_bulk_access_pkt structure
* @extension_pkt: pointer for q2spi_client_extension_pkt structure
* @cr_hdr_type: type of CR header corresponding to, defines in enum 'q2spi_cr_hdr_type'
* @num_valid_crs: number of valid CRs in CR packet
*/
struct q2spi_cr_packet {
struct q2spi_cr_header cr_hdr[4];
struct q2spi_ext_cr_header ext_cr_hdr;
struct q2spi_client_dma_pkt var3_pkt[4]; /* 4.2.2.3 Variant 4 T=3 */
struct q2spi_client_bulk_access_pkt bulk_pkt[4]; /* 4.2.2.5 Bulk Access Status */
struct q2spi_client_extension_pkt extension_pkt; /* 4.2.2.6 Extension CR */
u8 cr_hdr_type[4];
int num_valid_crs;
};
/**
* struct q2spi_packet - structure for Q2SPI packet
*
* @m_cmd_param: cmd corresponding to q2spi_packet
* @var1_pkt: pointer for HC variant1_pkt structure
* @var4_pkt: pointer for HC_variant4_5_pkt structure
* @var5_pkt: pointer for HC variant4_5_pkt structure
* @abort_pkt: pointer for abort_pkt structure
* @soft_reset_pkt: pointer for q2spi_soft_reset_pkt structure
* @xfer: pointer to dma_transfer structure
* @vtype: variant type.
* @valid: packet valid or not.
* @flow_id: flow id used for transaction.
* @status: success of failure xfer status
* @var1_tx_dma: variant_1 tx_dma buffer pointer
* @var5_tx_dma: variant_5 tx_dma buffer pointer
* @soft_reset_tx_dma: soft_reset tx_dma buffer pointer
* @sync: sync or async mode of transfer
* @q2spi: pointer for q2spi_geni structure
* @list: list for hc packets.
* @state: state of q2spi packet, defined in enum q2spi_pkt_state
* @data_length: Represents data length of the packet transfer
* @bulk_done: used to check if bulk status is done for q2spi_pkt
* @wait_for_db: used to check if doorbell came for q2spi_pkt
* @cr_hdr: cr_hdr corresponding to q2spi_packet
* @cr_var3: cr data corresponding to q2spi_packet
* @cr_bulk: cr bulk data corresponding to q2spi_packet
* @cr_hdr_type: cr header type corresponding to q2spi_packet
* @var3_data_len: var3 type q2spi_packet length
* @is_client_sleep_pkt: Indicate for sleep packet
*/
struct q2spi_packet {
unsigned int m_cmd_param;
struct q2spi_host_variant1_pkt *var1_pkt; /* 4.4.3.1 Variant 1 */
struct q2spi_host_variant4_5_pkt *var4_pkt; /*4.4.3.3 Variant 4 */
struct q2spi_host_variant4_5_pkt *var5_pkt; /*4.4.3.3 Variant 5 */
struct q2spi_host_abort_pkt *abort_pkt; /* 4.4.4 Abort Command */
struct q2spi_host_soft_reset_pkt *soft_reset_pkt; /*4.4.6.2 Soft Reset Command */
struct q2spi_dma_transfer *xfer;
enum var_type vtype;
bool valid;
u8 flow_id;
enum xfer_status status;
dma_addr_t var1_tx_dma;
dma_addr_t var5_tx_dma;
dma_addr_t var1_rx_dma;
dma_addr_t var5_rx_dma;
dma_addr_t soft_reset_tx_dma;
bool sync;
struct q2spi_geni *q2spi;
struct list_head list;
u8 state;
unsigned int data_length;
struct completion bulk_wait;
struct completion wait_for_db;
/* CR data corresponding to q2spi_packet */
struct q2spi_cr_header cr_hdr;
struct q2spi_client_dma_pkt cr_var3;
struct q2spi_client_bulk_access_pkt cr_bulk;
int cr_hdr_type;
int var3_data_len;
bool is_client_sleep_pkt;
};
void q2spi_doorbell(struct q2spi_geni *q2spi, const struct qup_q2spi_cr_header_event *event);
void q2spi_gsi_ch_ev_cb(struct dma_chan *ch, struct msm_gpi_cb const *cb, void *ptr);
void q2spi_geni_se_dump_regs(struct q2spi_geni *q2spi);
void q2spi_dump_ipc(struct q2spi_geni *q2spi, char *prefix, char *str, int size);
void q2spi_trace_log(struct device *dev, const char *fmt, ...);
void dump_ipc(struct q2spi_geni *q2spi, void *ctx, char *prefix, char *str, int size);
void *q2spi_kzalloc(struct q2spi_geni *q2spi, int size, int line);
void q2spi_kfree(struct q2spi_geni *q2spi, void *ptr, int line);
int q2spi_setup_gsi_xfer(struct q2spi_packet *q2spi_pkt);
int q2spi_alloc_xfer_tid(struct q2spi_geni *q2spi);
int q2spi_geni_gsi_setup(struct q2spi_geni *q2spi);
void q2spi_geni_gsi_release(struct q2spi_geni *q2spi);
int check_gsi_transfer_completion(struct q2spi_geni *q2spi);
int check_gsi_transfer_completion_db_rx(struct q2spi_geni *q2spi);
int q2spi_read_reg(struct q2spi_geni *q2spi, int reg_offset);
void q2spi_dump_client_error_regs(struct q2spi_geni *q2spi);
int q2spi_geni_resources_on(struct q2spi_geni *q2spi);
void q2spi_geni_resources_off(struct q2spi_geni *q2spi);
int __q2spi_send_messages(struct q2spi_geni *q2spi, void *ptr);
int q2spi_wakeup_slave_through_gpio(struct q2spi_geni *q2spi);
int q2spi_process_hrf_flow_after_lra(struct q2spi_geni *q2spi, struct q2spi_packet *q2spi_pkt);
void q2spi_transfer_soft_reset(struct q2spi_geni *q2spi);
void q2spi_transfer_abort(struct q2spi_geni *q2spi);
int q2spi_put_slave_to_sleep(struct q2spi_geni *q2spi);
#endif /* _SPI_Q2SPI_MSM_H_ */
Reference in New Issue View Git Blame Copy Permalink