Merge ddf4e7f0f5 ("i2c: imx-lpi2c: Fix clock count when probe defers") into android-mainline

Steps on the way to 6.6.90

Change-Id: Ie2c80420e8209f762b19889ecff0d4443fac2447
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

drivers/edac/altera_edac.c

@@ -98,7 +98,7 @@ static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id)
 	if (status & priv->ecc_stat_ce_mask) {
 		regmap_read(drvdata->mc_vbase, priv->ecc_saddr_offset,
 			    &err_addr);
-		if (priv->ecc_uecnt_offset)
+		if (priv->ecc_cecnt_offset)
 			regmap_read(drvdata->mc_vbase,  priv->ecc_cecnt_offset,
 				    &err_count);
 		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,
@@ -1015,9 +1015,6 @@ altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
 		}
 	}
 
-	/* Interrupt mode set to every SBERR */
-	regmap_write(ecc_mgr_map, ALTR_A10_ECC_INTMODE_OFST,
-		     ALTR_A10_ECC_INTMODE);
 	/* Enable ECC */
 	ecc_set_bits(ecc_ctrl_en_mask, (ecc_block_base +
 					ALTR_A10_ECC_CTRL_OFST));
@@ -2138,6 +2135,10 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
 		return PTR_ERR(edac->ecc_mgr_map);
 	}
 
+	/* Set irq mask for DDR SBE to avoid any pending irq before registration */
+	regmap_write(edac->ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST,
+		     (A10_SYSMGR_ECC_INTMASK_SDMMCB | A10_SYSMGR_ECC_INTMASK_DDR0));
+
 	edac->irq_chip.name = pdev->dev.of_node->name;
 	edac->irq_chip.irq_mask = a10_eccmgr_irq_mask;
 	edac->irq_chip.irq_unmask = a10_eccmgr_irq_unmask;

drivers/edac/altera_edac.h

@@ -249,6 +249,8 @@ struct altr_sdram_mc_data {
 #define A10_SYSMGR_ECC_INTMASK_SET_OFST   0x94
 #define A10_SYSMGR_ECC_INTMASK_CLR_OFST   0x98
 #define A10_SYSMGR_ECC_INTMASK_OCRAM      BIT(1)
+#define A10_SYSMGR_ECC_INTMASK_SDMMCB     BIT(16)
+#define A10_SYSMGR_ECC_INTMASK_DDR0       BIT(17)
 
 #define A10_SYSMGR_ECC_INTSTAT_SERR_OFST  0x9C
 #define A10_SYSMGR_ECC_INTSTAT_DERR_OFST  0xA0

drivers/gpu/drm/drm_file.c

@@ -1015,6 +1015,10 @@ void drm_show_fdinfo(struct seq_file *m, struct file *f)
 	struct drm_file *file = f->private_data;
 	struct drm_device *dev = file->minor->dev;
 	struct drm_printer p = drm_seq_file_printer(m);
+	int idx;
+
+	if (!drm_dev_enter(dev, &idx))
+		return;
 
 	drm_printf(&p, "drm-driver:\t%s\n", dev->driver->name);
 	drm_printf(&p, "drm-client-id:\t%llu\n", file->client_id);
@@ -1029,6 +1033,8 @@ void drm_show_fdinfo(struct seq_file *m, struct file *f)
 
 	if (dev->driver->show_fdinfo)
 		dev->driver->show_fdinfo(&p, file);
+
+	drm_dev_exit(idx);
 }
 EXPORT_SYMBOL(drm_show_fdinfo);
 

drivers/gpu/drm/nouveau/nouveau_fence.c

@@ -90,7 +90,7 @@ nouveau_fence_context_kill(struct nouveau_fence_chan *fctx, int error)
 	while (!list_empty(&fctx->pending)) {
 		fence = list_entry(fctx->pending.next, typeof(*fence), head);
 
-		if (error)
+		if (error && !dma_fence_is_signaled_locked(&fence->base))
 			dma_fence_set_error(&fence->base, error);
 
 		if (nouveau_fence_signal(fence))

drivers/i2c/busses/i2c-imx-lpi2c.c

@@ -616,9 +616,9 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 	return 0;
 
 rpm_disable:
-	pm_runtime_put(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 
 	return ret;
 }

drivers/net/usb/rndis_host.c

@@ -630,16 +630,6 @@ static const struct driver_info	zte_rndis_info = {
 	.tx_fixup =	rndis_tx_fixup,
 };
 
-static const struct driver_info	wwan_rndis_info = {
-	.description =	"Mobile Broadband RNDIS device",
-	.flags =	FLAG_WWAN | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT,
-	.bind =		rndis_bind,
-	.unbind =	rndis_unbind,
-	.status =	rndis_status,
-	.rx_fixup =	rndis_rx_fixup,
-	.tx_fixup =	rndis_tx_fixup,
-};
-
 /*-------------------------------------------------------------------------*/
 
 static const struct usb_device_id	products [] = {
@@ -676,11 +666,9 @@ static const struct usb_device_id	products [] = {
 	USB_INTERFACE_INFO(USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
 	.driver_info = (unsigned long) &rndis_info,
 }, {
-	/* Mobile Broadband Modem, seen in Novatel Verizon USB730L and
-	 * Telit FN990A (RNDIS)
-	 */
+	/* Novatel Verizon USB730L */
 	USB_INTERFACE_INFO(USB_CLASS_MISC, 4, 1),
-	.driver_info = (unsigned long)&wwan_rndis_info,
+	.driver_info = (unsigned long) &rndis_info,
 },
 	{ },		// END
 };

fs/btrfs/inode.c

@@ -2058,12 +2058,13 @@ next_slot:
 
 		/*
 		 * If the found extent starts after requested offset, then
-		 * adjust extent_end to be right before this extent begins
+		 * adjust cur_offset to be right before this extent begins.
 		 */
 		if (found_key.offset > cur_offset) {
-			extent_end = found_key.offset;
-			extent_type = 0;
-			goto must_cow;
+			if (cow_start == (u64)-1)
+				cow_start = cur_offset;
+			cur_offset = found_key.offset;
+			goto next_slot;
 		}
 
 		/*

sound/usb/endpoint.c

@@ -926,14 +926,21 @@ static int endpoint_set_interface(struct snd_usb_audio *chip,
 {
 	int altset = set ? ep->altsetting : 0;
 	int err;
+	int retries = 0;
+	const int max_retries = 5;
 
 	if (ep->iface_ref->altset == altset)
 		return 0;
 
 	usb_audio_dbg(chip, "Setting usb interface %d:%d for EP 0x%x\n",
 		      ep->iface, altset, ep->ep_num);
+retry:
 	err = usb_set_interface(chip->dev, ep->iface, altset);
 	if (err < 0) {
+		if (err == -EPROTO && ++retries <= max_retries) {
+			msleep(5 * (1 << (retries - 1)));
+			goto retry;
+		}
 		usb_audio_err_ratelimited(
 			chip, "%d:%d: usb_set_interface failed (%d)\n",
 			ep->iface, altset, err);

sound/usb/format.c

@@ -263,7 +263,8 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
 	}
 
 	/* Jabra Evolve 65 headset */
-	if (chip->usb_id == USB_ID(0x0b0e, 0x030b)) {
+	if (chip->usb_id == USB_ID(0x0b0e, 0x030b) ||
+	    chip->usb_id == USB_ID(0x0b0e, 0x030c)) {
 		/* only 48kHz for playback while keeping 16kHz for capture */
 		if (fp->nr_rates != 1)
 			return set_fixed_rate(fp, 48000, SNDRV_PCM_RATE_48000);