From d5ada7bf3dc8b936b222432e590376649e8ae825 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 4 Mar 2025 10:53:21 +0200 Subject: [PATCH] thunderbolt: Scan retimers after device router has been enumerated [ Upstream commit 75749d2c1d8cef439f8b69fa1f4f36d0fc3193e6 ] Thomas reported connection issues on AMD system with Pluggable UD-4VPD dock. After some experiments it looks like the device has some sort of internal timeout that triggers reconnect. This is completely against the USB4 spec, as there is no requirement for the host to enumerate the device right away or even at all. In Linux case the delay is caused by scanning of retimers on the link so we can work this around by doing the scanning after the device router has been enumerated. Reported-by: Thomas Lynema Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219748 Reviewed-by: Mario Limonciello Signed-off-by: Mika Westerberg Signed-off-by: Sasha Levin --- drivers/thunderbolt/tb.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index 7c3310a2b28a..b92a8a5b2e8c 100644 --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -1370,11 +1370,15 @@ static void tb_scan_port(struct tb_port *port) goto out_rpm_put; } - tb_retimer_scan(port, true); - sw = tb_switch_alloc(port->sw->tb, &port->sw->dev, tb_downstream_route(port)); if (IS_ERR(sw)) { + /* + * Make the downstream retimers available even if there + * is no router connected. + */ + tb_retimer_scan(port, true); + /* * If there is an error accessing the connected switch * it may be connected to another domain. Also we allow @@ -1424,6 +1428,14 @@ static void tb_scan_port(struct tb_port *port) upstream_port = tb_upstream_port(sw); tb_configure_link(port, upstream_port, sw); + /* + * Scan for downstream retimers. We only scan them after the + * router has been enumerated to avoid issues with certain + * Pluggable devices that expect the host to enumerate them + * within certain timeout. + */ + tb_retimer_scan(port, true); + /* * CL0s and CL1 are enabled and supported together. * Silently ignore CLx enabling in case CLx is not supported.