// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
 */

#include <dt-bindings/regulator/qcom,rpmh-regulator-levels.h>
#include <dt-bindings/clock/qcom,dispcc-sun.h>
#include <dt-bindings/clock/qcom,gcc-sun.h>
#include <dt-bindings/interconnect/qcom,sun.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,tcsrcc-sun.h>
#include <dt-bindings/arm/msm/qti-smmu-proxy-dt-ids.h>
#include "sun-sde-common.dtsi"

&soc {
	ext_disp: qcom,msm-ext-disp {
		compatible = "qcom,msm-ext-disp";

		ext_disp_audio_codec: qcom,msm-ext-disp-audio-codec-rx {
			compatible = "qcom,msm-ext-disp-audio-codec-rx";
		};
	};

	qcom_msmhdcp: qcom,msm_hdcp {
		compatible = "qcom,msm-hdcp";
	};

	sde_dp_pll: qcom,dp_pll@88eb000 {
		compatible = "qcom,dp-pll-3nm-v1";
		#clock-cells = <1>;
	};

	sde_dp: qcom,dp_display@af54000 {
		cell-index = <0>;
		compatible = "qcom,dp-display";

		usb-phy = <&usb_qmp_dp_phy>;
		qcom,ext-disp = <&ext_disp>;
		usb-controller = <&usb0>;
		qcom,altmode-dev = <&altmode 0>;
		qcom,dp-aux-switch = <&wcd_usbss>;

		reg =   <0xaf54000 0x104>,
			<0xaf54200 0x0c0>,
			<0xaf55000 0x770>,
			<0xaf56000 0x09c>,
			<0x88ebc00 0x200>,
			<0x88eb400 0x200>,
			<0x88eb800 0x200>,
			<0x88eb000 0x200>,
			<0x88e8000 0x020>,
			<0xaee1000 0x034>,
			<0xaf57000 0x09c>,
			<0xaf09000 0x014>;
		reg-names = "dp_ahb", "dp_aux", "dp_link",
			"dp_p0", "dp_phy", "dp_ln_tx0", "dp_ln_tx1",
			"dp_pll", "usb3_dp_com", "hdcp_physical",
			"dp_p1", "gdsc";

		interrupt-parent = <&mdss_mdp>;
		interrupts = <12 0>;

		#clock-cells = <1>;
		clocks =  <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
			<&rpmhcc RPMH_CXO_CLK>,
			<&tcsrcc TCSR_USB3_CLKREF_EN>,
			<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
			<&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
			<&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
			<&sde_dp_pll 0>,
			<&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
			<&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
			<&sde_dp_pll 1>,
			<&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>,
			<&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
			<&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
		clock-names = "core_aux_clk", "rpmh_cxo_clk", "core_usb_ref_clk_src",
			"core_usb_pipe_clk", "link_clk", "link_clk_src", "link_parent",
			"link_iface_clk", "pixel_clk_rcg", "pixel_parent",
			"pixel1_clk_rcg", "strm0_pixel_clk", "strm1_pixel_clk";

		qcom,dp-pll = <&sde_dp_pll>;
		qcom,phy-version = <0x800>;
		qcom,aux-cfg0-settings = [20 00];
		qcom,aux-cfg1-settings = [24 13];
		qcom,aux-cfg2-settings = [28 A4];
		qcom,aux-cfg3-settings = [2c 00];
		qcom,aux-cfg4-settings = [30 0a];
		qcom,aux-cfg5-settings = [34 26];
		qcom,aux-cfg6-settings = [38 0a];
		qcom,aux-cfg7-settings = [3c 03];
		qcom,aux-cfg8-settings = [40 b7];
		qcom,aux-cfg9-settings = [44 03];

		qcom,max-pclk-frequency-khz = <675000>;

		qcom,widebus-enable;
		qcom,4ppc-enable;
		qcom,mst-enable;
		qcom,dsc-feature-enable;
		qcom,fec-feature-enable;
		qcom,dsc-continuous-pps;

		qcom,qos-cpu-mask = <0xf>;
		qcom,qos-cpu-latency-us = <300>;

		vdda-1p2-supply = <&L3G>;
		vdda-0p9-supply = <&L2D>;
		vdda_usb-0p9-supply = <&L2D>;
		vdd_mx-supply = <&VDD_MXA_LEVEL>;
		dp_phy_gdsc-supply = <&gcc_usb3_phy_gdsc>;

		qcom,hbr-rbr-voltage-swing = <0x27 0x2f 0x36 0x3f>,
					<0x31 0x3e 0x3f 0xff>,
					<0x36 0x3f 0xff 0xff>,
					<0x3f 0xff 0xff 0xff>;
		qcom,hbr-rbr-pre-emphasis = <0x20 0x2d 0x34 0x3a>,
					<0x20 0x2e 0x35 0xff>,
					<0x20 0x2e 0xff 0xff>,
					<0x22 0xff 0xff 0xff>;

		qcom,hbr2-3-voltage-swing = <0x22 0x32 0x36 0x3a>,
					<0x29 0x39 0x3f 0xff>,
					<0x30 0x3f 0xff 0xff>,
					<0x3f 0xff 0xff 0xff>;
		qcom,hbr2-3-pre-emphasis = <0x20 0x2c 0x35 0x3b>,
					<0x22 0x2e 0x36 0xff>,
					<0x22 0x31 0xff 0xff>,
					<0x24 0xff 0xff 0xff>;

		qcom,ctrl-supply-entries {
			#address-cells = <1>;
			#size-cells = <0>;

			qcom,ctrl-supply-entry@0 {
				reg = <0>;
				qcom,supply-name = "vdda-1p2";
				qcom,supply-min-voltage = <1200000>;
				qcom,supply-max-voltage = <1200000>;
				qcom,supply-enable-load = <30000>;
				qcom,supply-disable-load = <0>;
			};
		};

		qcom,phy-supply-entries {
			#address-cells = <1>;
			#size-cells = <0>;

			qcom,phy-supply-entry@0 {
				reg = <0>;
				qcom,supply-name = "vdda-0p9";
				qcom,supply-min-voltage = <912000>;
				qcom,supply-max-voltage = <912000>;
				qcom,supply-enable-load = <114000>;
				qcom,supply-disable-load = <0>;
			};

			qcom,phy-supply-entry@1 {
				reg = <1>;
				qcom,supply-name = "vdda_usb-0p9";
				qcom,supply-min-voltage = <880000>;
				qcom,supply-max-voltage = <880000>;
				qcom,supply-enable-load = <2500>;
				qcom,supply-disable-load = <0>;
			};
		};

		qcom,pll-supply-entries {
			#address-cells = <1>;
			#size-cells = <0>;

			qcom,pll-supply-entry@0 {
				reg = <0>;
				qcom,supply-name = "vdd_mx";
				qcom,supply-min-voltage =
						<RPMH_REGULATOR_LEVEL_TURBO>;
				qcom,supply-max-voltage =
						<RPMH_REGULATOR_LEVEL_MAX>;
				qcom,supply-enable-load = <0>;
				qcom,supply-disable-load = <0>;
			};
		};
	};

	smmu_sde_iommu_region_partition: smmu_sde_iommu_region_partition {
		iommu-addresses = <&smmu_sde_unsec 0x0 0x00060000>,
				  <&smmu_sde_unsec 0xd4e23000 0x002dd000>,
				  <&smmu_sde_unsec 0xd2880000 0x05780000>,
				  <&smmu_sde_unsec 0xa3500000 0x02c80000>,
				  <&smmu_sde_unsec 0xfc800000 0x02b00000>,
				  <&smmu_sde_sec 0x0 0x00020000>;
	};

	smmu_sde_unsec: qcom,smmu_sde_unsec_cb {
		compatible = "qcom,smmu_sde_unsec";
		iommus = <&apps_smmu 0x800 0x2>;
		memory-region = <&smmu_sde_iommu_region_partition>;
		qcom,iommu-faults = "non-fatal";
		qcom,iommu-earlymap; /* for cont-splash */
		dma-coherent;
		clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
		clock-names = "mdp_core_clk";
	};

	smmu_sde_sec: qcom,smmu_sde_sec_cb {
		compatible = "qcom,smmu_sde_sec";
		iommus = <&apps_smmu 0x801 0x0>;
		memory-region = <&smmu_sde_iommu_region_partition>;
		qcom,iommu-faults = "non-fatal";
		qcom,iommu-vmid = <0xa>;
		clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
		clock-names = "mdp_core_clk";
	};

	sde_cesta: qcom,sde_cesta@0x0af30000 {
		cell-index = <0>;
		compatible = "qcom,sde-cesta";
		reg = <0x0af20000 0x850>,
			<0xaf30000 0x60>,
			<0xaf31000 0x30>,
			<0xaf32000 0x30>,
			<0xaf33000 0x30>,
			<0xaf34000 0x30>,
			<0xaf35000 0x30>,
			<0xaf36000 0x30>;
		reg-names = "rscc", "wrapper", "scc_0", "scc_1", "scc_2", "scc_3", "scc_4", "scc_5";

		clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
				<&dispcc DISP_CC_MDSS_MDP_CLK_SRC>;

		clock-names = "branch_clk", "core_clk";
		clock-rate = <575000000 575000000>;
		clock-max-rate = <575000000 575000000>;
		clock-mmrm = <0 DISP_CC_MDSS_MDP_CLK_SRC>;

		interconnects = <&mmss_noc MASTER_MDP_DISP_CRM_HW_0
					&mc_virt SLAVE_EBI1_DISP_CRM_HW_0>,
				<&mmss_noc MASTER_MDP_DISP_CRM_HW_1
					&mc_virt SLAVE_EBI1_DISP_CRM_HW_1>,
				<&mmss_noc MASTER_MDP_DISP_CRM_HW_2
					&mc_virt SLAVE_EBI1_DISP_CRM_HW_2>,
				<&mmss_noc MASTER_MDP_DISP_CRM_HW_3
					&mc_virt SLAVE_EBI1_DISP_CRM_HW_3>,
				<&mmss_noc MASTER_MDP_DISP_CRM_HW_4
					&mc_virt SLAVE_EBI1_DISP_CRM_HW_4>,
				<&mmss_noc MASTER_MDP_DISP_CRM_HW_5
					&mc_virt SLAVE_EBI1_DISP_CRM_HW_5>,
				<&mmss_noc MASTER_MDP_DISP_CRM_SW_0
					&mc_virt SLAVE_EBI1_DISP_CRM_SW_0>;
		interconnect-names = "qcom,sde-data-bus-hw-0", "qcom,sde-data-bus-hw-1",
					"qcom,sde-data-bus-hw-2", "qcom,sde-data-bus-hw-3",
					"qcom,sde-data-bus-hw-4", "qcom,sde-data-bus-hw-5",
					"qcom,sde-data-bus-sw-0";

		power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
	};
};

&mdss_mdp {
	clocks =
		<&gcc GCC_DISP_HF_AXI_CLK>,
		<&dispcc DISP_CC_MDSS_AHB_CLK>,
		<&dispcc DISP_CC_MDSS_VSYNC_CLK>,
		<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>;

	clock-names = "gcc_bus", "iface_clk", "vsync_clk", "lut_clk";
	clock-rate = <0 0 19200000 575000000>;
	clock-max-rate = <0 0 19200000 575000000>;

	qcom,hw-fence-sw-version = <0x1>;

	mmcx-supply = <&VDD_MMCX_LEVEL>;

	qti,smmu-proxy-cb-id = <QTI_SMMU_PROXY_DISPLAY_CB>;

	qcom,sde-soccp-controller = <&soccp_pas>;

	qcom,sde-vm-exclude-reg-names = "ipcc_reg";

	/* data and reg bus scale settings */
	interconnects = <&mmss_noc MASTER_MDP &gem_noc SLAVE_LLCC>,
			<&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>,
			<&gem_noc MASTER_APPSS_PROC
				&config_noc SLAVE_DISPLAY_CFG>;
	interconnect-names = "qcom,sde-data-bus0",
			"qcom,sde-ebi-bus", "qcom,sde-reg-bus";

	qcom,sde-has-idle-pc;

	qcom,sde-ib-bw-vote = <2500000 0 800000>;
	qcom,sde-dspp-ltm-version = <0x00010003>;
	/* offsets are based off dspp 0, 1, 2, and 3 */
	qcom,sde-dspp-ltm-off = <0x15300 0x14300 0x13300 0x12300>;

	nvmem-cells = <&ssip_config>;
	nvmem-cell-names = "ssip_config";

	qcom,platform-supply-entries {
		#address-cells = <1>;
		#size-cells = <0>;

		qcom,platform-supply-entry@0 {
			reg = <0>;
			qcom,supply-name = "mmcx";
			qcom,supply-min-voltage = <0>;
			qcom,supply-max-voltage = <0>;
			qcom,supply-enable-load = <0>;
			qcom,supply-disable-load = <0>;
		};
	};
};

&mdss_dsi0 {
	vdda-1p2-supply = <&L3G>;
	qcom,split-link-supported;
	clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
		<&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
		<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
		<&dispcc DISP_CC_MDSS_PCLK0_CLK>,
		<&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>,
		<&dispcc DISP_CC_ESYNC0_CLK>,
		<&dispcc_mx DISP_CC_OSC_CLK>,
		<&dispcc DISP_CC_MDSS_ESC0_CLK>,
		<&rpmhcc RPMH_CXO_CLK>;
	clock-names = "byte_clk", "byte_clk_rcg", "byte_intf_clk",
			"pixel_clk", "pixel_clk_rcg", "esync_clk", "osc_clk",
			"esc_clk", "xo";
};

&mdss_dsi1 {
	vdda-1p2-supply = <&L3G>;
	qcom,split-link-supported;
	clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
		<&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
		<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
		<&dispcc DISP_CC_MDSS_PCLK1_CLK>,
		<&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>,
		<&dispcc DISP_CC_ESYNC1_CLK>,
		<&dispcc_mx DISP_CC_OSC_CLK>,
		<&dispcc DISP_CC_MDSS_ESC1_CLK>,
		<&rpmhcc RPMH_CXO_CLK>;
	clock-names = "byte_clk", "byte_clk_rcg", "byte_intf_clk",
			"pixel_clk", "pixel_clk_rcg", "esync_clk", "osc_clk",
			"esc_clk", "xo";
};

&mdss_dsi_phy0 {
	vdda-0p9-supply = <&L3I>;
	qcom,panel-allow-phy-poweroff;
	qcom,dsi-pll-ssc-en;
	qcom,dsi-pll-ssc-mode = "down-spread";
	pll_codes_region = <&dsi_pll_codes_data>;

};

&mdss_dsi_phy1 {
	vdda-0p9-supply = <&L3I>;
	qcom,panel-allow-phy-poweroff;
	qcom,dsi-pll-ssc-en;
	qcom,dsi-pll-ssc-mode = "down-spread";
	pll_codes_region = <&dsi_pll_codes_data>;
};