Qualcomm Technologies, Inc. GPU powerlevels

Powerlevels are defined in sets by qcom,gpu-pwrlevels. Multiple sets (bins)
can be defined within qcom,gpu-pwrelvel-bins. Each powerlevel defines a
voltage, bus, bandwidth level, and a DVM value.

- qcom,gpu-pwrlevel-bins:	Contains one or more qcom,gpu-pwrlevels sets

Properties:
- compatible:			Must be qcom,gpu-pwrlevel-bins
- qcom,gpu-pwrlevels:		Defines a set of powerlevels

Properties:
- qcom,speed-bin:		Speed bin identifier for the set - if present
				must match the value read from the hardware

- qcom,sku-codes:		List of SKU versions specified by P-Code and
				Feature Code that can support this set of
				powerlevels. An entry of 0 in this list matches
				any SKU and can be used as a fallback if other
				powerlevel sets are not matched

- qcom,initial-pwrlevel:	GPU wakeup powerlevel
- qcom,initial-min-pwrlevel:	Initial minimum available GPU powerlevel

- qcom,gpu-pwrlevel:		A single powerlevel

- qcom,ca-target-pwrlevel:
				This value indicates which qcom,gpu-pwrlevel
				to jump on in case of context aware power level
				jump.
Required Properties:
- reg:				Index of the powerlevel (0 = highest perf)
- qcom,gpu-freq			GPU frequency for the powerlevel (in Hz)
- qcom,bus-freq			Index to a bus level (defined by the bus
				settings).

- qcom,bus-freq-ddrX		If specified, define the DDR specific bus
				frequency for the power level.  X will be the
				return value from of_fdt_get_ddrtype().

Optional Properties:
- qcom,bus-min			Minimum bus level to set for the power level

- qcom,bus-min-ddrX		If specified, define the DDR specific minimum
				bus level for the power level.  X will be the
				return value from of_fdt_get_ddrtype().

- qcom,bus-max			maximum bus level to set for the power level

- qcom,bus-max-ddrX		If specified, define the DDR specific maximum
				bus level for the power level.  X will be the
				return value from of_fdt_get_ddrtype().

- qcom,acd-level:		Value that is used as a register setting for
				the ACD power feature. It helps to determine
				the threshold for when ACD activates. Zero is
				the default value, and the setting where ACD
				will never activate.

- qcom,cx-level:		Specifies the CX vote required for each GPU power
				level.

Example:

qcom,gpu-pwrlevel@6 {
	reg = <6>;
	qcom,gpu-freq = <0>;
	qcom,bus-freq = <0>;
	qcom,bus-min = <0>;
	qcom,bus-max = <0>;
	qcom,acd-level = <0xffffffff>;
	qcom,cx-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
};

Example for DDR4/DDR5 specific part:

qcom,gpu-pwrlevel@6 {
	reg = <6>;
	qcom,gpu-freq = <480000000>;
	qcom,cx-level = <RPMH_REGULATOR_LEVEL_SVS>;

	/* DDR5 */
	qcom,bus-freq-ddr8 = <10>;
	qcom,bus-min-ddr8 = <9>;
	qcom,bus-max-ddr8 = <11>;

	/* DDR 4 */
	qcom,bus-freq-ddr7 = <9>;
	qcom,bus-min-ddr7 = <7>;
	qcom,bus-max-ddr7 = <9>;

	qcom,acd-level = <0xffffffff>;
};