replace common qcom sources with samsung ones
This commit is contained in:
SaschaNes
15
qcom/opensource/wlan/wlan-devicetree/Kbuild
Normal file
15
qcom/opensource/wlan/wlan-devicetree/Kbuild
Normal file
@@ -0,0 +1,15 @@
|
||||
#ifeq ($(CONFIG_ARCH_SUN),y)
|
||||
#dtbo-y += sun-kiwi-cnss.dtbo
|
||||
#dtbo-y += sun-kiwi-cnss-v8.dtbo
|
||||
#dtbo-y += sun-peach-cnss.dtbo
|
||||
#dtbo-y += sun-peach-cnss-v8.dtbo
|
||||
#endif
|
||||
|
||||
#ifeq ($(CONFIG_ARCH_PINEAPPLE),y)
|
||||
#dtbo-y += pineapple-kiwi-cnss.dtbo
|
||||
#dtbo-y += pineapplep-hdk-kiwi-cnss.dtbo
|
||||
#endif
|
||||
|
||||
#always-y := $(dtb-y) $(dtbo-y)
|
||||
#subdir-y := $(dts-dirs)
|
||||
#clean-files := *.dtb *.dtbo
|
||||
10
qcom/opensource/wlan/wlan-devicetree/Makefile
Normal file
10
qcom/opensource/wlan/wlan-devicetree/Makefile
Normal file
@@ -0,0 +1,10 @@
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
KBUILD_OPTIONS += KBUILD_EXTMOD_DTS=.
|
||||
|
||||
all: dtbs
|
||||
|
||||
clean:
|
||||
$(MAKE) -C $(KERNEL_SRC) M=$(M) clean
|
||||
|
||||
%:
|
||||
$(MAKE) -C $(KERNEL_SRC) M=$(M) $@ $(KBUILD_OPTIONS)
|
||||
357
qcom/opensource/wlan/wlan-devicetree/bindings/cnss-wlan.yaml
Normal file
357
qcom/opensource/wlan/wlan-devicetree/bindings/cnss-wlan.yaml
Normal file
@@ -0,0 +1,357 @@
|
||||
# Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
|
||||
title: Connectivity SubSystem Platform Driver
|
||||
|
||||
description:
|
||||
Connectivity SubSystem platform driver adds support for the CNSS subsystem
|
||||
used for PCIe based Wi-Fi devices. It also adds support to integrate PCIe
|
||||
WLAN module to subsystem restart framework. Apart from that, it also manages
|
||||
the 3.3V voltage regulator, WLAN Enable GPIO signal and PCIe link dynamically
|
||||
with support for suspend and resume by retaining the PCI config space
|
||||
states when PCIe link is shutdown. The main purpose of this device tree
|
||||
entry below is to invoke the CNSS platform driver and provide handle to
|
||||
the WLAN enable GPIO, 3.3V fixed voltage regulator resources. It also
|
||||
provides the reserved RAM dump memory location and size.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,cnss #for QCA6174 device
|
||||
- qcom,cnss-qca6290 #for QCA6290 device
|
||||
- qcom,cnss-qca6390 #for QCA6390 device
|
||||
- qcom,cnss-qca6490 #for QCA6490 device
|
||||
- qcom,cnss-kiwi #for KIWI device
|
||||
- qcom,cnss-qca-converged #for converged QCA devices
|
||||
|
||||
wlan-en-gpio:
|
||||
description: WLAN_EN GPIO signal specified by the chip specifications.
|
||||
|
||||
vdd-wlan-supply:
|
||||
description: phandle to the regulator device tree node.
|
||||
|
||||
pinctrl-names:
|
||||
description: Names corresponding to the numbered pinctrl states.
|
||||
|
||||
pinctrl-<n>:
|
||||
description: |
|
||||
Pinctrl states as described in
|
||||
bindings/pinctrl/pinctrl-bindings.txt.
|
||||
|
||||
qcom,wlan-rc-num:
|
||||
description: |
|
||||
List of PCIe root complex numbers which WLAN device may
|
||||
attach to.
|
||||
|
||||
qcom,wlan:
|
||||
description: |
|
||||
Signature string for WLAN devices which all CNSS family drivers
|
||||
are able to search for.
|
||||
|
||||
mpm_wake_set_gpios:
|
||||
description: |
|
||||
U32 array of GPIOs which need to be setup for
|
||||
interrupt wakeup capable.
|
||||
|
||||
qcom,notify-modem-status:
|
||||
description: |
|
||||
Boolean property to decide whether modem
|
||||
notification should be enabled or not in this
|
||||
platform.
|
||||
|
||||
wlan-soc-swreg-supply:
|
||||
description: phandle to the external 1.15V regulator for QCA6174.
|
||||
|
||||
wlan-ant-switch-supply:
|
||||
description: |
|
||||
phandle to the 2.7V regulator for the antenna
|
||||
switch of QCA6174.
|
||||
|
||||
qcom,wlan-uart-access:
|
||||
description: |
|
||||
Boolean property to decide whether QCA6174
|
||||
has exclusive access to UART.
|
||||
|
||||
vdd-wlan-io-supply:
|
||||
description: phandle to the 1.8V IO regulator for QCA6174.
|
||||
|
||||
vdd-wlan-io12-supply:
|
||||
description: phandle to the 1.2V IO regulator for Kiwi.
|
||||
|
||||
vdd-wlan-ant-share-supply:
|
||||
description: phandle to the Antenna Sharing regulator.
|
||||
|
||||
vdd-wlan-xtal-supply:
|
||||
description: phandle to the 1.8V XTAL regulator for QCA6174.
|
||||
|
||||
vdd-wlan-xtal-aon-supply:
|
||||
description: |
|
||||
phandle to the LDO-4 regulator. This is needed
|
||||
on platforms where XTAL regulator depends on
|
||||
always on regulator in VDDmin.
|
||||
|
||||
vdd-wlan-ctrl1-supply:
|
||||
description: |
|
||||
phandle to the DBU1 - 1.8V for QCA6595 or 3.3V for
|
||||
QCA6174 on auto platform.
|
||||
|
||||
vdd-wlan-ctrl2-supply:
|
||||
description: |
|
||||
phandle to the DBU4 - 2.2V for QCA6595 or 3.85V for
|
||||
QCA6696 on auto platform.
|
||||
|
||||
vdd-wlan-core-supply:
|
||||
description: phandle to the 1.3V CORE regulator for QCA6174.
|
||||
|
||||
vdd-wlan-sp2t-supply:
|
||||
description: phandle to the 2.7V SP2T regulator for QCA6174.
|
||||
|
||||
<supply-name>-supply:
|
||||
description: |
|
||||
phandle to the regulator device tree node.
|
||||
optional "supply-name" is "vdd-wlan-rfa".
|
||||
|
||||
qcom,<supply>-config:
|
||||
description: |
|
||||
Specifies voltage levels for supply. Should specified
|
||||
in pairs (min, max), units uV. There can be optional
|
||||
load in uA and Regulator settle delay in us.
|
||||
|
||||
qcom,smmu-s1-enable:
|
||||
description: |
|
||||
Boolean property to decide whether to enable SMMU
|
||||
S1 stage or not.
|
||||
|
||||
qcom,wlan-smmu-iova-address:
|
||||
description: |
|
||||
I/O virtual address range as <start length>
|
||||
format to be used for allocations associated
|
||||
between WLAN/PCIe and SMMU.
|
||||
|
||||
qcom,wlan-ramdump-dynamic:
|
||||
description: |
|
||||
To enable CNSS RAMDUMP collection
|
||||
by providing the size of CNSS DUMP.
|
||||
|
||||
qcom,cmd_db_name:
|
||||
description: |
|
||||
CommandDB name indicating the PMIC rail used for open
|
||||
loop CPR.
|
||||
|
||||
reg:
|
||||
description: Memory regions defined as starting address and size.
|
||||
|
||||
reg-names:
|
||||
description: Names of the memory regions defined in reg entry.
|
||||
|
||||
wlan-bootstrap-gpio:
|
||||
description: |
|
||||
WLAN_BOOTSTRAP GPIO signal specified by QCA6174
|
||||
which should be drived depending on platforms.
|
||||
|
||||
qcom,is-dual-wifi-enabled:
|
||||
description: |
|
||||
Boolean property to control wlan enable(wlan-en)
|
||||
gpio on dual-wifi platforms.
|
||||
|
||||
vdd-wlan-en-supply:
|
||||
description: |
|
||||
WLAN_EN fixed regulator specified by QCA6174
|
||||
specifications.
|
||||
|
||||
qcom,wlan-en-vreg-support:
|
||||
description: |
|
||||
Boolean property to decide the whether the
|
||||
WLAN_EN pin is a gpio or fixed regulator.
|
||||
|
||||
qcom,mhi:
|
||||
description: phandle to indicate the device which needs MHI support.
|
||||
|
||||
qcom,cap-tsf-gpio:
|
||||
description: |
|
||||
WLAN_TSF_CAPTURED GPIO signal specified by the chip
|
||||
specifications, should be drived depending on products.
|
||||
|
||||
cnss-daemon-support:
|
||||
description: |
|
||||
Boolean property to decide whether cnss_daemon
|
||||
userspace QMI client is supported.
|
||||
|
||||
use-nv-mac:
|
||||
description: Boolean property to indicate whether NV MAC is used or not.
|
||||
|
||||
qcom,set-wlaon-pwr-ctrl:
|
||||
description: |
|
||||
Boolean property to indicate if set
|
||||
WLAON_QFPROM_PWR_CTRL_REG register during power on
|
||||
and off sequences.
|
||||
|
||||
use-pm-domain:
|
||||
description: |
|
||||
Boolean property to indicate if driver needs to use PM
|
||||
domain or not.
|
||||
|
||||
qcom,wlan-cbc-enabled:
|
||||
description: boolean property to control cold boot calibration.
|
||||
|
||||
interconnects:
|
||||
description: Interconnect framework setup for bus configuration.
|
||||
|
||||
interconnect-names:
|
||||
description: Interconnect path names as strings.
|
||||
|
||||
qcom,icc-path-count:
|
||||
description: Number of Interconnect paths for this platform.
|
||||
|
||||
qcom,bus-bw-cfg-count:
|
||||
description: Number of bus bandwidth voting cases.
|
||||
|
||||
qcom,bus-bw-cfg:
|
||||
description: Bus bandwidth voting data.
|
||||
|
||||
qcom,tcs_offset_int_pow_amp_vreg:
|
||||
description: |
|
||||
TCS CMD register offset for Voltage
|
||||
regulator used in internal power amplifier for QCA6490.
|
||||
|
||||
cnss-enable-self-recovery:
|
||||
description: |
|
||||
Boolean property to enable self recovery when
|
||||
recovery is trigeered with reason link down.
|
||||
|
||||
qcom,bt-en-gpio:
|
||||
description: |
|
||||
QCA6490 requires synchronization for BT and WLAN GPIO
|
||||
enable to resolve PMU power up issues. Provide BT GPIO using
|
||||
this config param.
|
||||
|
||||
qcom,same-dt-multi-dev:
|
||||
description: |
|
||||
Boolean property to decide whether it supports
|
||||
multiple WLAN devices using the same DT node
|
||||
without sub-nodes.
|
||||
|
||||
qcom,converged-dt:
|
||||
description: |
|
||||
Boolean property to decide whether it supports multiple
|
||||
WLAN devices using the same DT node with sub-nodes.
|
||||
|
||||
mboxes:
|
||||
description: Specifies mbox channel data for AOP messaging.
|
||||
|
||||
qcom,vreg_ipa:
|
||||
description: |
|
||||
Specifies voltage regulator used for WLAN device internal
|
||||
power amp config.
|
||||
|
||||
qcom,xo-clk-gpio:
|
||||
description: Added for QCA6490 XO CLK selection leakage prevention.
|
||||
|
||||
platform-name-required:
|
||||
description: |
|
||||
Boolean property to decide whether
|
||||
platform name required.
|
||||
|
||||
chip_cfg@X:
|
||||
description: represent chip specific configurations
|
||||
enum:
|
||||
-supported-ids #U32 array to decide which device ids are supported by sub node.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- wlan-en-gpio
|
||||
- vdd-wlan-supply
|
||||
- pinctrl-names
|
||||
- pinctrl-<n>
|
||||
- qcom,wlan-rc-num
|
||||
- qcom,wlan
|
||||
|
||||
examples:
|
||||
- |
|
||||
qcom,cnss@0d400000 {
|
||||
compatible = "qcom,cnss";
|
||||
reg = <0x0d400000 0x200000>;
|
||||
reg-names = "ramdump";
|
||||
qcom,wlan-ramdump-dynamic = <0x200000>;
|
||||
wlan-en-gpio = <&msmgpio 82 0>;
|
||||
vdd-wlan-supply = <&wlan_vreg>;
|
||||
qcom,notify-modem-status;
|
||||
wlan-soc-swreg-supply = <&pma8084_l27>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cnss_default>;
|
||||
qcom,wlan;
|
||||
qcom,wlan-rc-num = <0>;
|
||||
qcom,wlan-smmu-iova-address = <0 0x10000000>;
|
||||
qcom,mhi = <&mhi_wlan>;
|
||||
qcom,cap-tsf-gpio = <&tlmm 126 1>;
|
||||
};
|
||||
|
||||
wlan: qcom,cnss-qca6490@b0000000 {
|
||||
compatible = "qcom,cnss-qca6490";
|
||||
reg = <0xb0000000 0x10000>;
|
||||
reg-names = "smmu_iova_ipa";
|
||||
wlan-en-gpio = <&tlmm 80 0>;
|
||||
qcom,bt-en-gpio = <&tlmm 81 0>;
|
||||
pinctrl-names = "wlan_en_active", "wlan_en_sleep";
|
||||
pinctrl-0 = <&cnss_wlan_en_active>;
|
||||
pinctrl-1 = <&cnss_wlan_en_sleep>;
|
||||
qcom,wlan;
|
||||
qcom,wlan-rc-num = <0>;
|
||||
qcom,wlan-ramdump-dynamic = <0x420000>;
|
||||
qcom,wlan-cbc-enabled;
|
||||
use-pm-domain;
|
||||
cnss-enable-self-recovery;
|
||||
qcom,same-dt-multi-dev;
|
||||
mboxes = <&qmp_aop 0>;
|
||||
qcom,vreg_ipa="s3e";
|
||||
qcom,xo-clk-gpio = <&tlmm 204 0>;
|
||||
vdd-wlan-aon-supply = <&S2E>;
|
||||
qcom,vdd-wlan-aon-config = <1012000 1012000 0 0 1>;
|
||||
vdd-wlan-dig-supply = <&S11B>;
|
||||
qcom,vdd-wlan-dig-config = <966000 966000 0 0 1>;
|
||||
vdd-wlan-io-supply = <&S10B>;
|
||||
qcom,vdd-wlan-io-config = <1800000 1800000 0 0 1>;
|
||||
vdd-wlan-rfa1-supply = <&S1C>;
|
||||
qcom,vdd-wlan-rfa1-config = <1900000 2100000 0 0 1>;
|
||||
vdd-wlan-rfa2-supply = <&S12B>;
|
||||
qcom,vdd-wlan-rfa2-config = <1350000 1350000 0 0 1>;
|
||||
wlan-ant-switch-supply = <&L7E>;
|
||||
qcom,wlan-ant-switch-config = <2800000 2800000 0 0 1>;
|
||||
};
|
||||
|
||||
wlan: qcom,cnss-qca-converged {
|
||||
compatible = "qcom,cnss-qca-converged";
|
||||
qcom,converged-dt;
|
||||
qcom,wlan-sw-ctrl-gpio = <&tlmm 83 0>;
|
||||
chip_cfg@0 {
|
||||
supported-ids = <0x1103>;
|
||||
reg = <0xb0000000 0x10000>;
|
||||
reg-names = "smmu_iova_ipa";
|
||||
wlan-en-gpio = <&tlmm 80 0>;
|
||||
pinctrl-names = "wlan_en_active", "wlan_en_sleep";
|
||||
pinctrl-0 = <&cnss_wlan_en_active>;
|
||||
pinctrl-1 = <&cnss_wlan_en_sleep>;
|
||||
qcom,wlan;
|
||||
qcom,wlan-rc-num = <0>;
|
||||
qcom,wlan-ramdump-dynamic = <0x780000>;
|
||||
qcom,wlan-cbc-enabled;
|
||||
use-pm-domain;
|
||||
mboxes = <&qmp_aop 0>;
|
||||
vdd-wlan-io-supply = <&L15B>;
|
||||
qcom,vdd-wlan-io-config = <1800000 1800000 0 0 1>;
|
||||
vdd-wlan-supply = <&S5G>;
|
||||
qcom,vdd-wlan-config = <1000000 1000000 0 0 1>;
|
||||
vdd-wlan-aon-supply = <&S2G>;
|
||||
qcom,vdd-wlan-aon-config = <980000 980000 0 0 1>;
|
||||
vdd-wlan-dig-supply = <&S4E>;
|
||||
qcom,vdd-wlan-dig-config = <950000 950000 0 0 1>;
|
||||
vdd-wlan-rfa1-supply = <&S6G>;
|
||||
qcom,vdd-wlan-rfa1-config = <1900000 1900000 0 0 1>;
|
||||
vdd-wlan-rfa2-supply = <&S4G>;
|
||||
qcom,vdd-wlan-rfa2-config = <1350000 1350000 0 0 1>;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
||||
139
qcom/opensource/wlan/wlan-devicetree/bindings/icnss-wlan.yaml
Normal file
139
qcom/opensource/wlan/wlan-devicetree/bindings/icnss-wlan.yaml
Normal file
@@ -0,0 +1,139 @@
|
||||
# Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
|
||||
title: Integrated connectivity Platform Driver
|
||||
|
||||
description:
|
||||
Integrated connectivity platform driver adds support for the Integrated WLAN
|
||||
that runs on Q6 based platforms. WLAN FW on these architecture runs on Q6. This
|
||||
platform driver communicates with WLAN FW over QMI, WLAN on/off messages
|
||||
to FW are communicated thru this interface. This driver also listens to
|
||||
WLAN PD restart notifications.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,icnss #for ADRASTEA architecture
|
||||
- qcom,wcn6750 #for iWCN architecture
|
||||
- qcom,wcn6450 #for evros architecture
|
||||
- qcom,wcn7750 #for wcn7750 architecture
|
||||
|
||||
reg:
|
||||
description: Memory regions defined as starting address and size.
|
||||
|
||||
reg-names:
|
||||
description: Names of the memory regions defined in reg entry.
|
||||
|
||||
interrupts:
|
||||
description: Copy engine interrupt table.
|
||||
|
||||
qcom,wlan-msa-memory:
|
||||
description: MSA memory size.
|
||||
|
||||
clocks:
|
||||
description: List of clock phandles.
|
||||
|
||||
clock-names:
|
||||
description: List of clock names corresponding to the "clocks" property.
|
||||
|
||||
iommus:
|
||||
description: SMMUs and corresponding Stream IDs needed by WLAN.
|
||||
|
||||
qcom,wlan-smmu-iova-address:
|
||||
description: |
|
||||
I/O virtual address range as <start length>
|
||||
format to be used for allocations associated between WLAN and SMMU.
|
||||
|
||||
qcom,wlan:
|
||||
description: |
|
||||
Signature string for WLAN devices which all CNSS family drivers
|
||||
are able to search for.
|
||||
|
||||
<supply-name>-supply:
|
||||
description: |
|
||||
phandle to the regulator device tree node
|
||||
optional "supply-name" is "vdd-0.8-cx-mx".
|
||||
|
||||
qcom,<supply>-config:
|
||||
description: |
|
||||
Specifies voltage levels for supply. Should be
|
||||
specified in pairs (min, max), units uV. There can
|
||||
be optional load in uA and Regulator settle delay in
|
||||
uS.
|
||||
qcom,icnss-vadc:
|
||||
description: VADC handle for vph_pwr read APIs.
|
||||
|
||||
qcom,icnss-adc_tm:
|
||||
description: VADC handle for vph_pwr notification APIs.
|
||||
|
||||
io-channels:
|
||||
description: IIO channel to monitor for vph_pwr power.
|
||||
|
||||
io-channel-names:
|
||||
description: IIO channel name as per the client name.
|
||||
|
||||
qcom,smmu-s1-bypass:
|
||||
description: Boolean context flag to set SMMU to S1 bypass.
|
||||
|
||||
qcom,wlan-msa-fixed-region:
|
||||
description: phandle, specifier pairs to children of /reserved-memory.
|
||||
|
||||
qcom,hyp_disabled:
|
||||
description: Boolean context flag to disable hyperviser.
|
||||
|
||||
qcom,smp2p_map_wlan_1_in:
|
||||
description: Represents the in smp2p to wlan driver from modem.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- reg-names
|
||||
- interrupts
|
||||
- qcom,wlan-msa-memory
|
||||
- clocks
|
||||
- clock-names
|
||||
- iommus
|
||||
- qcom,wlan-smmu-iova-address
|
||||
- qcom,wlan
|
||||
|
||||
examples:
|
||||
- |
|
||||
qcom,icnss@0a000000 {
|
||||
compatible = "qcom,icnss";
|
||||
reg = <0x0a000000 0x1000000>;
|
||||
reg-names = "membase";
|
||||
clocks = <&clock_gcc clk_aggre2_noc_clk>;
|
||||
clock-names = "smmu_aggre2_noc_clk";
|
||||
iommus = <&anoc2_smmu 0x1900>,
|
||||
<&anoc2_smmu 0x1901>;
|
||||
qcom,wlan-smmu-iova-address = <0 0x10000000>;
|
||||
qcom,wlan;
|
||||
interrupts = <0 130 0 /* CE0 */ >,
|
||||
<0 131 0 /* CE1 */ >,
|
||||
<0 132 0 /* CE2 */ >,
|
||||
<0 133 0 /* CE3 */ >,
|
||||
<0 134 0 /* CE4 */ >,
|
||||
<0 135 0 /* CE5 */ >,
|
||||
<0 136 0 /* CE6 */ >,
|
||||
<0 137 0 /* CE7 */ >,
|
||||
<0 138 0 /* CE8 */ >,
|
||||
<0 139 0 /* CE9 */ >,
|
||||
<0 140 0 /* CE10 */ >,
|
||||
<0 141 0 /* CE11 */ >;
|
||||
qcom,wlan-msa-memory = <0x200000>;
|
||||
qcom,wlan-msa-fixed-region = <&wlan_msa_mem>;
|
||||
qcom,smmu-s1-bypass;
|
||||
vdd-0.8-cx-mx-supply = <&pm8998_l5>;
|
||||
qcom,vdd-0.8-cx-mx-config = <800000 800000 2400 1000>;
|
||||
qcom,hyp_disabled;
|
||||
qcom,smp2p_map_wlan_1_in {
|
||||
interrupts-extended = <&smp2p_wlan_1_in 0 0>,
|
||||
<&smp2p_wlan_1_in 1 0>;
|
||||
interrupt-names = "qcom,smp2p-force-fatal-error",
|
||||
"qcom,smp2p-early-crash-ind";
|
||||
};
|
||||
};
|
||||
...
|
||||
|
||||
17
qcom/opensource/wlan/wlan-devicetree/pineapple-kiwi-cnss.dts
Normal file
17
qcom/opensource/wlan/wlan-devicetree/pineapple-kiwi-cnss.dts
Normal file
@@ -0,0 +1,17 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "pineapple-kiwi-cnss.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Pineapple SoCs";
|
||||
compatible = "qcom,pineapple", "qcom,pineapplep";
|
||||
qcom,msm-id = <557 0x10000>, <577 0x10000>, <557 0x20000>, <577 0x20000>;
|
||||
qcom,board-id = <1 0>, <8 0>, <11 0>, <0x15 0>, <0x1000B 0>, <0x10021 0>, <0x50001 0>, <0x50008 0>, <0x5000B 0>;
|
||||
};
|
||||
199
qcom/opensource/wlan/wlan-devicetree/pineapple-kiwi-cnss.dtsi
Normal file
199
qcom/opensource/wlan/wlan-devicetree/pineapple-kiwi-cnss.dtsi
Normal file
@@ -0,0 +1,199 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interconnect/qcom,pineapple.h>
|
||||
|
||||
&tlmm {
|
||||
cnss_pins {
|
||||
cnss_wlan_en_active: cnss_wlan_en_active {
|
||||
mux {
|
||||
pins = "gpio16";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio16";
|
||||
drive-strength = <16>;
|
||||
output-high;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
cnss_wlan_en_sleep: cnss_wlan_en_sleep {
|
||||
mux {
|
||||
pins = "gpio16";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio16";
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&reserved_memory {
|
||||
cnss_wlan_mem: cnss_wlan_region {
|
||||
compatible = "shared-dma-pool";
|
||||
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
||||
reusable;
|
||||
alignment = <0x0 0x400000>;
|
||||
size = <0x0 0x2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
wlan_kiwi: qcom,cnss-kiwi@b0000000 {
|
||||
compatible = "qcom,cnss-kiwi";
|
||||
reg = <0xb0000000 0x10000>;
|
||||
reg-names = "smmu_iova_ipa";
|
||||
qcom,wlan-sw-ctrl-gpio = <&tlmm 19 0>;
|
||||
|
||||
supported-ids = <0x1107>;
|
||||
wlan-en-gpio = <&tlmm 16 0>;
|
||||
qcom,bt-en-gpio = <&tlmm 17 0>;
|
||||
qcom,sw-ctrl-gpio = <&tlmm 18 0>;
|
||||
/* List of GPIOs to be setup for interrupt wakeup capable */
|
||||
mpm_wake_set_gpios = <18 19>;
|
||||
pinctrl-names = "wlan_en_active", "wlan_en_sleep";
|
||||
pinctrl-0 = <&cnss_wlan_en_active>;
|
||||
pinctrl-1 = <&cnss_wlan_en_sleep>;
|
||||
qcom,wlan;
|
||||
qcom,wlan-rc-num = <0>;
|
||||
qcom,wlan-ramdump-dynamic = <0x780000>;
|
||||
qcom,wlan-cbc-enabled;
|
||||
cnss-enable-self-recovery;
|
||||
use-pm-domain;
|
||||
qcom,same-dt-multi-dev;
|
||||
/* For AOP communication, use direct QMP instead of mailbox */
|
||||
qcom,qmp = <&aoss_qmp>;
|
||||
|
||||
vdd-wlan-io-supply = <&L15B>;
|
||||
qcom,vdd-wlan-io-config = <1800000 1800000 0 0 1>;
|
||||
vdd-wlan-io12-supply = <&L3C>;
|
||||
qcom,vdd-wlan-io12-config = <1200000 1200000 0 0 1>;
|
||||
vdd-wlan-supply = <&S4I>;
|
||||
qcom,vdd-wlan-config = <940000 940000 0 0 1>;
|
||||
vdd-wlan-aon-supply = <&S2C>;
|
||||
qcom,vdd-wlan-aon-config = <976000 976000 0 0 1>;
|
||||
vdd-wlan-dig-supply = <&S3C>;
|
||||
qcom,vdd-wlan-dig-config = <916000 916000 0 0 1>;
|
||||
vdd-wlan-rfa1-supply = <&S6C>;
|
||||
qcom,vdd-wlan-rfa1-config = <1864000 1864000 0 0 1>;
|
||||
vdd-wlan-rfa2-supply = <&S1C>;
|
||||
qcom,vdd-wlan-rfa2-config = <1316000 1316000 0 0 1>;
|
||||
vdd-wlan-ant-share-supply = <&L6K>;
|
||||
qcom,vdd-wlan-ant-share-config = <1800000 1800000 0 0 1>;
|
||||
|
||||
interconnects =
|
||||
<&pcie_noc MASTER_PCIE_0 &pcie_noc SLAVE_ANOC_PCIE_GEM_NOC>,
|
||||
<&gem_noc MASTER_ANOC_PCIE_GEM_NOC &mc_virt SLAVE_EBI1>;
|
||||
interconnect-names = "pcie_to_memnoc", "memnoc_to_ddr";
|
||||
|
||||
qcom,icc-path-count = <2>;
|
||||
qcom,bus-bw-cfg-count = <9>;
|
||||
qcom,bus-bw-cfg =
|
||||
/** ICC Path 1 **/
|
||||
<0 0>, /* no vote */
|
||||
/* idle: 0-18 Mbps snoc/anoc: 100 Mhz */
|
||||
<2250 1600000>,
|
||||
/* low: 18-60 Mbps snoc/anoc: 100 Mhz */
|
||||
<7500 1600000>,
|
||||
/* medium: 60-240 Mbps snoc/anoc: 100 Mhz */
|
||||
<30000 1600000>,
|
||||
/* high: 240-1200 Mbps snoc/anoc: 100 Mhz */
|
||||
<100000 1600000>,
|
||||
/* very high: > 1200 Mbps snoc/anoc: 403 Mhz */
|
||||
<175000 6448000>,
|
||||
/* ultra high: DBS mode snoc/anoc: 403 Mhz */
|
||||
<312500 6448000>,
|
||||
/* super high: DBS mode snoc/anoc: 533 Mhz */
|
||||
<587500 8528000>,
|
||||
/* low (latency critical): 18-60 Mbps snoc/anoc: 200 Mhz */
|
||||
<7500 3200000>,
|
||||
|
||||
/** ICC Path 2 **/
|
||||
<0 0>,
|
||||
/* idle: 0-18 Mbps ddr: 547.2 MHz */
|
||||
<2250 2188800>,
|
||||
/* low: 18-60 Mbps ddr: 547.2 MHz */
|
||||
<7500 2188800>,
|
||||
/* medium: 60-240 Mbps ddr: 547.2 MHz */
|
||||
<30000 2188800>,
|
||||
/* high: 240-1200 Mbps ddr: 547.2 MHz */
|
||||
<100000 2188800>,
|
||||
/* very high: > 1200 Mbps ddr: 1555 MHz */
|
||||
<175000 6220800>,
|
||||
/* ultra high: DBS mode ddr: 2092 MHz */
|
||||
<312500 8368000>,
|
||||
/* super high: DBS mode ddr: 3.2 GHz */
|
||||
<587500 12800000>,
|
||||
/* low (latency critical): 18-60 Mbps ddr: 547.2 MHz */
|
||||
<7500 2188800>;
|
||||
|
||||
qcom,vreg_pdc_map =
|
||||
"s3c", "rf",
|
||||
"l15B", "rf",
|
||||
"l3c", "rf",
|
||||
"s1c", "rf",
|
||||
"s6c", "rf",
|
||||
"s2c", "bb",
|
||||
"s4i", "bb";
|
||||
|
||||
qcom,pmu_vreg_map =
|
||||
"VDD095_MX_PMU", "s2c",
|
||||
"VDD095_PMU", "s4i",
|
||||
"VDD_PMU_AON_I", "s3c",
|
||||
"VDD095_PMU_BT", "s3c",
|
||||
"VDD09_PMU_RFA_I", "s3c",
|
||||
"VDD13_PMU_PCIE_I", "s1c",
|
||||
"VDD13_PMU_RFA_I", "s1c",
|
||||
"VDD19_PMU_PCIE_I", "s6c",
|
||||
"VDD19_PMU_RFA_I", "s6c";
|
||||
|
||||
qcom,pdc_init_table =
|
||||
"{class: wlan_pdc, ss: rf, res: s3c.v, upval: 916}",
|
||||
"{class: wlan_pdc, ss: rf, res: s3c.v, dwnval: 612}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1c.v, upval: 1316}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1c.v, dwnval: 944}",
|
||||
"{class: wlan_pdc, ss: rf, res: s6c.v, upval: 1864}",
|
||||
"{class: wlan_pdc, ss: rf, res: s6c.v, dwnval: 1820}",
|
||||
"{class: wlan_pdc, ss: bb, res: s2c.v, upval: 976}",
|
||||
"{class: wlan_pdc, ss: bb, res: s2c.v, dwnval: 512}",
|
||||
"{class: wlan_pdc, ss: bb, res: s4i.v, upval: 940}",
|
||||
"{class: wlan_pdc, ss: bb, res: s4i.v, dwnval: 420}";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0_rp {
|
||||
|
||||
cnss_pci0: cnss_pci0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
qcom,iommu-group = <&cnss_pci_iommu_group0>;
|
||||
memory-region = <&cnss_wlan_mem &cnss_pci0_iommu_region_partition>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cnss_pci0_iommu_region_partition: cnss_pci0_iommu_region_partition {
|
||||
/* address-cells =3 size-cells=2 from pineapple-pcie.dtsi */
|
||||
iommu-addresses = <&cnss_pci0 0x0 0x0 0x0 0x0 0x98000000>,
|
||||
<&cnss_pci0 0x0 0x0 0xB0000000 0x0 0x50000000>;
|
||||
};
|
||||
|
||||
cnss_pci_iommu_group0: cnss_pci_iommu_group0 {
|
||||
qcom,iommu-msi-size = <0x1000>;
|
||||
qcom,iommu-geometry = <0x98000000 0x18010000>;
|
||||
qcom,iommu-dma = "fastmap";
|
||||
qcom,iommu-pagetable = "coherent";
|
||||
qcom,iommu-faults = "stall-disable", "HUPCF",
|
||||
"non-fatal";
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,17 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "pineapplep-hdk-kiwi-cnss.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. PineappleP HDK";
|
||||
compatible = "qcom,pineapplep-hdk", "qcom,pineapplep", "qcom,hdk";
|
||||
qcom,msm-id = <577 0x10000>, <577 0x20000>;
|
||||
qcom,board-id = <0x1f 0>;
|
||||
};
|
||||
@@ -0,0 +1,194 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interconnect/qcom,pineapple.h>
|
||||
|
||||
&tlmm {
|
||||
cnss_pins {
|
||||
cnss_wlan_en_active: cnss_wlan_en_active {
|
||||
mux {
|
||||
pins = "gpio16";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio16";
|
||||
drive-strength = <16>;
|
||||
output-high;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
cnss_wlan_en_sleep: cnss_wlan_en_sleep {
|
||||
mux {
|
||||
pins = "gpio16";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio16";
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&reserved_memory {
|
||||
cnss_wlan_mem: cnss_wlan_region {
|
||||
compatible = "shared-dma-pool";
|
||||
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
||||
reusable;
|
||||
alignment = <0x0 0x400000>;
|
||||
size = <0x0 0x2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
wlan_kiwi: qcom,cnss-kiwi@b0000000 {
|
||||
compatible = "qcom,cnss-kiwi";
|
||||
reg = <0xb0000000 0x10000>;
|
||||
reg-names = "smmu_iova_ipa";
|
||||
qcom,wlan-sw-ctrl-gpio = <&tlmm 19 0>;
|
||||
|
||||
supported-ids = <0x1107>;
|
||||
wlan-en-gpio = <&tlmm 16 0>;
|
||||
qcom,bt-en-gpio = <&tlmm 17 0>;
|
||||
qcom,sw-ctrl-gpio = <&tlmm 18 0>;
|
||||
/* List of GPIOs to be setup for interrupt wakeup capable */
|
||||
mpm_wake_set_gpios = <18 19>;
|
||||
pinctrl-names = "wlan_en_active", "wlan_en_sleep";
|
||||
pinctrl-0 = <&cnss_wlan_en_active>;
|
||||
pinctrl-1 = <&cnss_wlan_en_sleep>;
|
||||
qcom,wlan;
|
||||
qcom,wlan-rc-num = <0>;
|
||||
qcom,wlan-ramdump-dynamic = <0x780000>;
|
||||
qcom,wlan-cbc-enabled;
|
||||
cnss-enable-self-recovery;
|
||||
use-pm-domain;
|
||||
qcom,same-dt-multi-dev;
|
||||
/* For AOP communication, use direct QMP instead of mailbox */
|
||||
qcom,qmp = <&aoss_qmp>;
|
||||
|
||||
vdd-wlan-io-supply = <&L15B>;
|
||||
qcom,vdd-wlan-io-config = <1800000 1800000 0 0 1>;
|
||||
vdd-wlan-io12-supply = <&L3C>;
|
||||
qcom,vdd-wlan-io12-config = <1200000 1200000 0 0 1>;
|
||||
vdd-wlan-supply = <&S4I>;
|
||||
qcom,vdd-wlan-config = <940000 940000 0 0 1>;
|
||||
vdd-wlan-aon-supply = <&S2C>;
|
||||
qcom,vdd-wlan-aon-config = <976000 976000 0 0 1>;
|
||||
vdd-wlan-dig-supply = <&S3C>;
|
||||
qcom,vdd-wlan-dig-config = <916000 916000 0 0 1>;
|
||||
vdd-wlan-rfa1-supply = <&S6C>;
|
||||
qcom,vdd-wlan-rfa1-config = <1864000 1864000 0 0 1>;
|
||||
vdd-wlan-rfa2-supply = <&S1C>;
|
||||
qcom,vdd-wlan-rfa2-config = <1316000 1316000 0 0 1>;
|
||||
|
||||
interconnects =
|
||||
<&pcie_noc MASTER_PCIE_0 &pcie_noc SLAVE_ANOC_PCIE_GEM_NOC>,
|
||||
<&gem_noc MASTER_ANOC_PCIE_GEM_NOC &mc_virt SLAVE_EBI1>;
|
||||
interconnect-names = "pcie_to_memnoc", "memnoc_to_ddr";
|
||||
|
||||
qcom,icc-path-count = <2>;
|
||||
qcom,bus-bw-cfg-count = <9>;
|
||||
qcom,bus-bw-cfg =
|
||||
/** ICC Path 1 **/
|
||||
<0 0>, /* no vote */
|
||||
/* idle: 0-18 Mbps snoc/anoc: 100 Mhz */
|
||||
<2250 1600000>,
|
||||
/* low: 18-60 Mbps snoc/anoc: 100 Mhz */
|
||||
<7500 1600000>,
|
||||
/* medium: 60-240 Mbps snoc/anoc: 100 Mhz */
|
||||
<30000 1600000>,
|
||||
/* high: 240-1200 Mbps snoc/anoc: 100 Mhz */
|
||||
<100000 1600000>,
|
||||
/* very high: > 1200 Mbps snoc/anoc: 403 Mhz */
|
||||
<175000 6448000>,
|
||||
/* ultra high: DBS mode snoc/anoc: 403 Mhz */
|
||||
<312500 6448000>,
|
||||
/* super high: DBS mode snoc/anoc: 533 Mhz */
|
||||
<587500 8528000>,
|
||||
/* low (latency critical): 18-60 Mbps snoc/anoc: 200 Mhz */
|
||||
<7500 3200000>,
|
||||
|
||||
/** ICC Path 2 **/
|
||||
<0 0>,
|
||||
/* idle: 0-18 Mbps ddr: 547.2 MHz */
|
||||
<2250 2188800>,
|
||||
/* low: 18-60 Mbps ddr: 547.2 MHz */
|
||||
<7500 2188800>,
|
||||
/* medium: 60-240 Mbps ddr: 547.2 MHz */
|
||||
<30000 2188800>,
|
||||
/* high: 240-1200 Mbps ddr: 547.2 MHz */
|
||||
<100000 2188800>,
|
||||
/* very high: > 1200 Mbps ddr: 1555 MHz */
|
||||
<175000 6220800>,
|
||||
/* ultra high: DBS mode ddr: 2092 MHz */
|
||||
<312500 8368000>,
|
||||
/* super high: DBS mode ddr: 3.2 GHz */
|
||||
<587500 12800000>,
|
||||
/* low (latency critical): 18-60 Mbps ddr: 547.2 MHz */
|
||||
<7500 2188800>;
|
||||
|
||||
qcom,vreg_pdc_map =
|
||||
"s3c", "rf",
|
||||
"l15B", "rf",
|
||||
"l3c", "rf",
|
||||
"s1c", "rf",
|
||||
"s6c", "rf",
|
||||
"s2c", "bb",
|
||||
"s4i", "bb";
|
||||
|
||||
qcom,pmu_vreg_map =
|
||||
"VDD095_MX_PMU", "s2c",
|
||||
"VDD095_PMU", "s4i",
|
||||
"VDD_PMU_AON_I", "s3c",
|
||||
"VDD095_PMU_BT", "s3c",
|
||||
"VDD09_PMU_RFA_I", "s3c",
|
||||
"VDD13_PMU_PCIE_I", "s1c",
|
||||
"VDD13_PMU_RFA_I", "s1c",
|
||||
"VDD19_PMU_PCIE_I", "s6c",
|
||||
"VDD19_PMU_RFA_I", "s6c";
|
||||
|
||||
qcom,pdc_init_table =
|
||||
"{class: wlan_pdc, ss: rf, res: s3c.v, upval: 916}",
|
||||
"{class: wlan_pdc, ss: rf, res: s3c.v, dwnval: 612}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1c.v, upval: 1316}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1c.v, dwnval: 944}",
|
||||
"{class: wlan_pdc, ss: rf, res: s6c.v, upval: 1864}",
|
||||
"{class: wlan_pdc, ss: rf, res: s6c.v, dwnval: 1820}",
|
||||
"{class: wlan_pdc, ss: bb, res: s2c.v, upval: 976}",
|
||||
"{class: wlan_pdc, ss: bb, res: s2c.v, dwnval: 512}",
|
||||
"{class: wlan_pdc, ss: bb, res: s4i.v, upval: 940}",
|
||||
"{class: wlan_pdc, ss: bb, res: s4i.v, dwnval: 420}";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0_rp {
|
||||
#address-cells = <5>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cnss_pci0: cnss_pci0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
qcom,iommu-group = <&cnss_pci_iommu_group0>;
|
||||
memory-region = <&cnss_wlan_mem>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cnss_pci_iommu_group0: cnss_pci_iommu_group0 {
|
||||
qcom,iommu-msi-size = <0x1000>;
|
||||
qcom,iommu-dma-addr-pool = <0xa0000000 0x10000000>;
|
||||
qcom,iommu-geometry = <0xa0000000 0x10010000>;
|
||||
qcom,iommu-dma = "fastmap";
|
||||
qcom,iommu-pagetable = "coherent";
|
||||
qcom,iommu-faults = "stall-disable", "HUPCF", "no-CFRE",
|
||||
"non-fatal";
|
||||
};
|
||||
};
|
||||
};
|
||||
18
qcom/opensource/wlan/wlan-devicetree/sun-kiwi-cnss-v8.dts
Normal file
18
qcom/opensource/wlan/wlan-devicetree/sun-kiwi-cnss-v8.dts
Normal file
@@ -0,0 +1,18 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "sun-kiwi-cnss-v8.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Sun SoCs";
|
||||
compatible = "qcom,sun", "qcom,sunp";
|
||||
qcom,msm-id = <618 0x10000>, <618 0x20000>,
|
||||
<639 0x10000>, <639 0x20000>;
|
||||
qcom,board-id = <0x60001 0>, <0x50008 0>, <0x20015 0>;
|
||||
};
|
||||
218
qcom/opensource/wlan/wlan-devicetree/sun-kiwi-cnss-v8.dtsi
Normal file
218
qcom/opensource/wlan/wlan-devicetree/sun-kiwi-cnss-v8.dtsi
Normal file
@@ -0,0 +1,218 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interconnect/qcom,sun.h>
|
||||
|
||||
&tlmm {
|
||||
cnss_pins {
|
||||
cnss_wlan_en_active: cnss_wlan_en_active {
|
||||
mux {
|
||||
pins = "gpio16";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio16";
|
||||
drive-strength = <16>;
|
||||
output-high;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
cnss_wlan_en_sleep: cnss_wlan_en_sleep {
|
||||
mux {
|
||||
pins = "gpio16";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio16";
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
cnss_wlan_sw_ctrl: cnss_wlan_sw_ctrl {
|
||||
mux {
|
||||
pins = "gpio18";
|
||||
function = "wcn_sw_ctrl";
|
||||
};
|
||||
};
|
||||
|
||||
cnss_wlan_sw_ctrl_wl_cx: cnss_wlan_sw_ctrl_wl_cx {
|
||||
mux {
|
||||
pins = "gpio19";
|
||||
function = "wcn_sw";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&reserved_memory {
|
||||
cnss_wlan_mem: cnss_wlan_region {
|
||||
compatible = "shared-dma-pool";
|
||||
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
||||
reusable;
|
||||
alignment = <0x0 0x400000>;
|
||||
size = <0x0 0x2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
wlan_kiwi: qcom,cnss-kiwi@b0000000 {
|
||||
compatible = "qcom,cnss-kiwi";
|
||||
reg = <0xb0000000 0x10000>;
|
||||
reg-names = "smmu_iova_ipa";
|
||||
qcom,wlan-sw-ctrl-gpio = <&tlmm 19 0>;
|
||||
|
||||
supported-ids = <0x1107>;
|
||||
wlan-en-gpio = <&tlmm 16 0>;
|
||||
qcom,bt-en-gpio = <&pm8550ve_f_gpios 3 0>;
|
||||
qcom,sw-ctrl-gpio = <&tlmm 18 0>;
|
||||
/* List of GPIOs to be setup for interrupt wakeup capable */
|
||||
mpm_wake_set_gpios = <18 19>;
|
||||
pinctrl-names = "wlan_en_active", "wlan_en_sleep", "sw_ctrl",
|
||||
"sw_ctrl_wl_cx";
|
||||
pinctrl-0 = <&cnss_wlan_en_active>;
|
||||
pinctrl-1 = <&cnss_wlan_en_sleep>;
|
||||
pinctrl-2 = <&cnss_wlan_sw_ctrl>;
|
||||
pinctrl-3 = <&cnss_wlan_sw_ctrl_wl_cx>;
|
||||
qcom,wlan;
|
||||
qcom,wlan-rc-num = <0>;
|
||||
qcom,wlan-ramdump-dynamic = <0x780000>;
|
||||
cnss-enable-self-recovery;
|
||||
qcom,wlan-cbc-enabled;
|
||||
use-pm-domain;
|
||||
qcom,same-dt-multi-dev;
|
||||
/* For AOP communication, use direct QMP instead of mailbox */
|
||||
qcom,qmp = <&aoss_qmp>;
|
||||
|
||||
vdd-wlan-io-supply = <&L3F>;
|
||||
qcom,vdd-wlan-io-config = <1800000 1800000 0 0 1>;
|
||||
vdd-wlan-io12-supply = <&L2F>;
|
||||
qcom,vdd-wlan-io12-config = <1200000 1200000 0 0 1>;
|
||||
vdd-wlan-supply = <&S5F>;
|
||||
qcom,vdd-wlan-config = <932000 1000000 0 0 0>;
|
||||
vdd-wlan-aon-supply = <&S4D>;
|
||||
qcom,vdd-wlan-aon-config = <976000 1036000 0 0 1>;
|
||||
vdd-wlan-dig-supply = <&S1D>;
|
||||
qcom,vdd-wlan-dig-config = <916000 1100000 0 0 1>;
|
||||
vdd-wlan-rfa1-supply = <&S3G>;
|
||||
qcom,vdd-wlan-rfa1-config = <1864000 2000000 0 0 1>;
|
||||
vdd-wlan-rfa2-supply = <&S7I>;
|
||||
qcom,vdd-wlan-rfa2-config = <1316000 1340000 0 0 1>;
|
||||
vdd-wlan-ant-share-supply = <&L6K>;
|
||||
qcom,vdd-wlan-ant-share-config = <1800000 1800000 0 0 1>;
|
||||
|
||||
interconnects =
|
||||
<&pcie_noc MASTER_PCIE_0 &pcie_noc SLAVE_ANOC_PCIE_GEM_NOC>,
|
||||
<&gem_noc MASTER_ANOC_PCIE_GEM_NOC &mc_virt SLAVE_EBI1>;
|
||||
interconnect-names = "pcie_to_memnoc", "memnoc_to_ddr";
|
||||
|
||||
qcom,icc-path-count = <2>;
|
||||
qcom,bus-bw-cfg-count = <9>;
|
||||
qcom,bus-bw-cfg =
|
||||
/** ICC Path 1 **/
|
||||
<0 0>, /* no vote */
|
||||
/* idle: 0-18 Mbps snoc/anoc: 100 Mhz */
|
||||
<2250 1600000>,
|
||||
/* low: 18-60 Mbps snoc/anoc: 100 Mhz */
|
||||
<7500 1600000>,
|
||||
/* medium: 60-240 Mbps snoc/anoc: 100 Mhz */
|
||||
<30000 1600000>,
|
||||
/* high: 240-1200 Mbps snoc/anoc: 100 Mhz */
|
||||
<100000 1600000>,
|
||||
/* very high: > 1200 Mbps snoc/anoc: 403 Mhz */
|
||||
<175000 6448000>,
|
||||
/* ultra high: DBS mode snoc/anoc: 403 Mhz */
|
||||
<312500 6448000>,
|
||||
/* super high: DBS mode snoc/anoc: 533 Mhz */
|
||||
<587500 8528000>,
|
||||
/* low (latency critical): 18-60 Mbps snoc/anoc: 200 Mhz */
|
||||
<7500 3200000>,
|
||||
|
||||
/** ICC Path 2 **/
|
||||
<0 0>,
|
||||
/* idle: 0-18 Mbps ddr: 547.2 MHz */
|
||||
<2250 2188800>,
|
||||
/* low: 18-60 Mbps ddr: 547.2 MHz */
|
||||
<7500 2188800>,
|
||||
/* medium: 60-240 Mbps ddr: 547.2 MHz */
|
||||
<30000 2188800>,
|
||||
/* high: 240-1200 Mbps ddr: 547.2 MHz */
|
||||
<100000 2188800>,
|
||||
/* very high: > 1200 Mbps ddr: 1555 MHz */
|
||||
<175000 6220800>,
|
||||
/* ultra high: DBS mode ddr: 2092 MHz */
|
||||
<312500 8368000>,
|
||||
/* super high: DBS mode ddr: 3.2 GHz */
|
||||
<587500 12800000>,
|
||||
/* low (latency critical): 18-60 Mbps ddr: 547.2 MHz */
|
||||
<7500 2188800>;
|
||||
|
||||
qcom,vreg_pdc_map =
|
||||
"s5f", "bb",
|
||||
"s4d", "bb",
|
||||
"s3g", "rf",
|
||||
"s7i", "rf",
|
||||
"s1d", "rf";
|
||||
|
||||
qcom,pmu_vreg_map =
|
||||
"VDD095_MX_PMU", "s4d",
|
||||
"VDD095_PMU", "s5f",
|
||||
"VDD_PMU_AON_I", "s1d",
|
||||
"VDD095_PMU_BT", "s1d",
|
||||
"VDD09_PMU_RFA_I", "s1d",
|
||||
"VDD13_PMU_PCIE_I", "s7i",
|
||||
"VDD13_PMU_RFA_I", "s7i",
|
||||
"VDD19_PMU_PCIE_I", "s3g",
|
||||
"VDD19_PMU_RFA_I", "s3g";
|
||||
|
||||
qcom,pdc_init_table =
|
||||
"{class: wlan_pdc, ss: rf, res: s3g.v, upval: 1856}",
|
||||
"{class: wlan_pdc, ss: rf, res: s3g.v, dwnval: 1844}",
|
||||
"{class: wlan_pdc, ss: rf, res: s7i.v, upval: 1316}",
|
||||
"{class: wlan_pdc, ss: rf, res: s7i.v, dwnval: 972}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.m, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.v, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.v, upval: 916}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.v, dwnval: 880}",
|
||||
"{class: wlan_pdc, ss: bb, res: s4d.v, upval: 976}",
|
||||
"{class: wlan_pdc, ss: bb, res: s4d.v, dwnval: 536}",
|
||||
"{class: wlan_pdc, ss: bb, res: s5f.m, enable: 1}",
|
||||
"{class: wlan_pdc, ss: bb, res: s5f.v, enable: 1}",
|
||||
"{class: wlan_pdc, ss: bb, res: s5f.v, upval: 932}",
|
||||
"{class: wlan_pdc, ss: bb, res: s5f.v, dwnval: 444}";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0_rp {
|
||||
|
||||
cnss_pci0: cnss_pci0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
qcom,iommu-group = <&cnss_pci_iommu_group0>;
|
||||
memory-region = <&cnss_wlan_mem &cnss_pci0_iommu_region_partition>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cnss_pci0_iommu_region_partition: cnss_pci0_iommu_region_partition {
|
||||
/* address-cells =3 size-cells=2 from sun-pcie.dtsi */
|
||||
iommu-addresses = <&cnss_pci0 0x0 0x0 0x0 0x0 0xa0000000>,
|
||||
<&cnss_pci0 0x0 0x0 0xB0000000 0x0 0x50000000>;
|
||||
};
|
||||
|
||||
cnss_pci_iommu_group0: cnss_pci_iommu_group0 {
|
||||
qcom,iommu-msi-size = <0x1000>;
|
||||
qcom,iommu-geometry = <0xa0000000 0x10010000>;
|
||||
qcom,iommu-dma = "fastmap";
|
||||
qcom,iommu-pagetable = "coherent";
|
||||
qcom,iommu-faults = "stall-disable", "HUPCF",
|
||||
"non-fatal";
|
||||
};
|
||||
};
|
||||
};
|
||||
17
qcom/opensource/wlan/wlan-devicetree/sun-kiwi-cnss.dts
Normal file
17
qcom/opensource/wlan/wlan-devicetree/sun-kiwi-cnss.dts
Normal file
@@ -0,0 +1,17 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "sun-kiwi-cnss.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Sun SoCs";
|
||||
compatible = "qcom,sun", "qcom,sunp", "qcom,sun-mtp", "qcom,sun-cdp";
|
||||
qcom,msm-id = <618 0x10000>, <618 0x20000>, <639 0x10000>, <639 0x20000>;
|
||||
qcom,board-id = <0x20001 0>, <0x20008 0>, <0x40015 0>;
|
||||
};
|
||||
220
qcom/opensource/wlan/wlan-devicetree/sun-kiwi-cnss.dtsi
Normal file
220
qcom/opensource/wlan/wlan-devicetree/sun-kiwi-cnss.dtsi
Normal file
@@ -0,0 +1,220 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interconnect/qcom,sun.h>
|
||||
|
||||
&tlmm {
|
||||
cnss_pins {
|
||||
cnss_wlan_en_active: cnss_wlan_en_active {
|
||||
mux {
|
||||
pins = "gpio16";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio16";
|
||||
drive-strength = <16>;
|
||||
output-high;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
cnss_wlan_en_sleep: cnss_wlan_en_sleep {
|
||||
mux {
|
||||
pins = "gpio16";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio16";
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
cnss_wlan_sw_ctrl: cnss_wlan_sw_ctrl {
|
||||
mux {
|
||||
pins = "gpio18";
|
||||
function = "wcn_sw_ctrl";
|
||||
};
|
||||
};
|
||||
|
||||
cnss_wlan_sw_ctrl_wl_cx: cnss_wlan_sw_ctrl_wl_cx {
|
||||
mux {
|
||||
pins = "gpio19";
|
||||
function = "wcn_sw";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&reserved_memory {
|
||||
cnss_wlan_mem: cnss_wlan_region {
|
||||
compatible = "shared-dma-pool";
|
||||
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
||||
reusable;
|
||||
alignment = <0x0 0x400000>;
|
||||
size = <0x0 0x2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
wlan_kiwi: qcom,cnss-kiwi@b0000000 {
|
||||
compatible = "qcom,cnss-kiwi";
|
||||
reg = <0xb0000000 0x10000>;
|
||||
reg-names = "smmu_iova_ipa";
|
||||
qcom,wlan-sw-ctrl-gpio = <&tlmm 19 0>;
|
||||
|
||||
supported-ids = <0x1107>;
|
||||
wlan-en-gpio = <&tlmm 16 0>;
|
||||
qcom,bt-en-gpio = <&pm8550vs_f_gpios 3 0>;
|
||||
qcom,sw-ctrl-gpio = <&tlmm 18 0>;
|
||||
/* List of GPIOs to be setup for interrupt wakeup capable */
|
||||
mpm_wake_set_gpios = <18 19>;
|
||||
pinctrl-names = "wlan_en_active", "wlan_en_sleep", "sw_ctrl",
|
||||
"sw_ctrl_wl_cx";
|
||||
pinctrl-0 = <&cnss_wlan_en_active>;
|
||||
pinctrl-1 = <&cnss_wlan_en_sleep>;
|
||||
pinctrl-2 = <&cnss_wlan_sw_ctrl>;
|
||||
pinctrl-3 = <&cnss_wlan_sw_ctrl_wl_cx>;
|
||||
qcom,wlan;
|
||||
qcom,wlan-rc-num = <0>;
|
||||
qcom,wlan-ramdump-dynamic = <0x780000>;
|
||||
cnss-enable-self-recovery;
|
||||
qcom,wlan-cbc-enabled;
|
||||
use-pm-domain;
|
||||
qcom,same-dt-multi-dev;
|
||||
/* For AOP communication, use direct QMP instead of mailbox */
|
||||
qcom,qmp = <&aoss_qmp>;
|
||||
|
||||
vdd-wlan-io-supply = <&L3F>;
|
||||
qcom,vdd-wlan-io-config = <1800000 1800000 0 0 1>;
|
||||
vdd-wlan-io12-supply = <&L2F>;
|
||||
qcom,vdd-wlan-io12-config = <1200000 1200000 0 0 1>;
|
||||
vdd-wlan-supply = <&S4J>;
|
||||
qcom,vdd-wlan-config = <932000 1000000 0 0 0>;
|
||||
vdd-wlan-aon-supply = <&S4D>;
|
||||
qcom,vdd-wlan-aon-config = <976000 1036000 0 0 1>;
|
||||
vdd-wlan-dig-supply = <&S1D>;
|
||||
qcom,vdd-wlan-dig-config = <916000 1100000 0 0 1>;
|
||||
vdd-wlan-rfa1-supply = <&S3G>;
|
||||
qcom,vdd-wlan-rfa1-config = <1864000 2000000 0 0 1>;
|
||||
vdd-wlan-rfa2-supply = <&S7I>;
|
||||
qcom,vdd-wlan-rfa2-config = <1316000 1340000 0 0 1>;
|
||||
vdd-wlan-ant-share-supply = <&L6K>;
|
||||
qcom,vdd-wlan-ant-share-config = <1800000 1800000 0 0 1>;
|
||||
|
||||
interconnects =
|
||||
<&pcie_noc MASTER_PCIE_0 &pcie_noc SLAVE_ANOC_PCIE_GEM_NOC>,
|
||||
<&gem_noc MASTER_ANOC_PCIE_GEM_NOC &mc_virt SLAVE_EBI1>;
|
||||
interconnect-names = "pcie_to_memnoc", "memnoc_to_ddr";
|
||||
|
||||
qcom,icc-path-count = <2>;
|
||||
qcom,bus-bw-cfg-count = <9>;
|
||||
qcom,bus-bw-cfg =
|
||||
/** ICC Path 1 **/
|
||||
<0 0>, /* no vote */
|
||||
/* idle: 0-18 Mbps snoc/anoc: 100 Mhz */
|
||||
<2250 1600000>,
|
||||
/* low: 18-60 Mbps snoc/anoc: 100 Mhz */
|
||||
<7500 1600000>,
|
||||
/* medium: 60-240 Mbps snoc/anoc: 100 Mhz */
|
||||
<30000 1600000>,
|
||||
/* high: 240-1200 Mbps snoc/anoc: 100 Mhz */
|
||||
<100000 1600000>,
|
||||
/* very high: > 1200 Mbps snoc/anoc: 403 Mhz */
|
||||
<175000 6448000>,
|
||||
/* ultra high: DBS mode snoc/anoc: 403 Mhz */
|
||||
<312500 6448000>,
|
||||
/* super high: DBS mode snoc/anoc: 533 Mhz */
|
||||
<587500 8528000>,
|
||||
/* low (latency critical): 18-60 Mbps snoc/anoc: 200 Mhz */
|
||||
<7500 3200000>,
|
||||
|
||||
/** ICC Path 2 **/
|
||||
<0 0>,
|
||||
/* idle: 0-18 Mbps ddr: 547.2 MHz */
|
||||
<2250 2188800>,
|
||||
/* low: 18-60 Mbps ddr: 547.2 MHz */
|
||||
<7500 2188800>,
|
||||
/* medium: 60-240 Mbps ddr: 547.2 MHz */
|
||||
<30000 2188800>,
|
||||
/* high: 240-1200 Mbps ddr: 547.2 MHz */
|
||||
<100000 2188800>,
|
||||
/* very high: > 1200 Mbps ddr: 1555 MHz */
|
||||
<175000 6220800>,
|
||||
/* ultra high: DBS mode ddr: 2092 MHz */
|
||||
<312500 8368000>,
|
||||
/* super high: DBS mode ddr: 3.2 GHz */
|
||||
<587500 12800000>,
|
||||
/* low (latency critical): 18-60 Mbps ddr: 547.2 MHz */
|
||||
<7500 2188800>;
|
||||
|
||||
qcom,vreg_pdc_map =
|
||||
"s4j", "bb",
|
||||
"s4d", "bb",
|
||||
"s3g", "rf",
|
||||
"s7i", "rf",
|
||||
"s1d", "rf";
|
||||
|
||||
qcom,pmu_vreg_map =
|
||||
"VDD095_MX_PMU", "s4d",
|
||||
"VDD095_PMU", "s4j",
|
||||
"VDD_PMU_AON_I", "s1d",
|
||||
"VDD095_PMU_BT", "s1d",
|
||||
"VDD09_PMU_RFA_I", "s1d",
|
||||
"VDD13_PMU_PCIE_I", "s7i",
|
||||
"VDD13_PMU_RFA_I", "s7i",
|
||||
"VDD19_PMU_PCIE_I", "s3g",
|
||||
"VDD19_PMU_RFA_I", "s3g";
|
||||
|
||||
qcom,pdc_init_table =
|
||||
"{class: wlan_pdc, ss: rf, res: s3g.v, upval: 1856}",
|
||||
"{class: wlan_pdc, ss: rf, res: s3g.v, dwnval: 1844}",
|
||||
"{class: wlan_pdc, ss: rf, res: s7i.v, upval: 1316}",
|
||||
"{class: wlan_pdc, ss: rf, res: s7i.v, dwnval: 972}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.m, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.v, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.v, upval: 916}",
|
||||
"{class: wlan_pdc, ss: rf, res: s1d.v, dwnval: 880}",
|
||||
"{class: wlan_pdc, ss: rf, res: s4j.m, enable: 0}",
|
||||
"{class: wlan_pdc, ss: rf, res: s4j.v, enable: 0}",
|
||||
"{class: wlan_pdc, ss: bb, res: s4d.v, upval: 976}",
|
||||
"{class: wlan_pdc, ss: bb, res: s4d.v, dwnval: 536}",
|
||||
"{class: wlan_pdc, ss: bb, res: s4j.m, enable: 1}",
|
||||
"{class: wlan_pdc, ss: bb, res: s4j.v, enable: 1}",
|
||||
"{class: wlan_pdc, ss: bb, res: s4j.v, upval: 932}",
|
||||
"{class: wlan_pdc, ss: bb, res: s4j.v, dwnval: 444}";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0_rp {
|
||||
|
||||
cnss_pci0: cnss_pci0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
qcom,iommu-group = <&cnss_pci_iommu_group0>;
|
||||
memory-region = <&cnss_wlan_mem &cnss_pci0_iommu_region_partition>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cnss_pci0_iommu_region_partition: cnss_pci0_iommu_region_partition {
|
||||
/* address-cells =3 size-cells=2 from sun-pcie.dtsi */
|
||||
iommu-addresses = <&cnss_pci0 0x0 0x0 0x0 0x0 0xa0000000>,
|
||||
<&cnss_pci0 0x0 0x0 0xB0000000 0x0 0x50000000>;
|
||||
};
|
||||
|
||||
cnss_pci_iommu_group0: cnss_pci_iommu_group0 {
|
||||
qcom,iommu-msi-size = <0x1000>;
|
||||
qcom,iommu-geometry = <0xa0000000 0x10010000>;
|
||||
qcom,iommu-dma = "fastmap";
|
||||
qcom,iommu-pagetable = "coherent";
|
||||
qcom,iommu-faults = "stall-disable", "HUPCF",
|
||||
"non-fatal";
|
||||
};
|
||||
};
|
||||
};
|
||||
19
qcom/opensource/wlan/wlan-devicetree/sun-peach-cnss-v8.dts
Normal file
19
qcom/opensource/wlan/wlan-devicetree/sun-peach-cnss-v8.dts
Normal file
@@ -0,0 +1,19 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "sun-peach-cnss-v8.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Sun SoCs";
|
||||
compatible = "qcom,sun", "qcom,sunp";
|
||||
qcom,msm-id = <618 0x10000>, <618 0x20000>,
|
||||
<639 0x10000>, <639 0x20000>;
|
||||
qcom,board-id = <0x50001 0>, <0x40008 0>, <0x3000B 0>, <0x2000B 0>,
|
||||
<0x30008 0>, <0x40001 0>, <0x30015 0>, <0x60008 0>;
|
||||
};
|
||||
193
qcom/opensource/wlan/wlan-devicetree/sun-peach-cnss-v8.dtsi
Normal file
193
qcom/opensource/wlan/wlan-devicetree/sun-peach-cnss-v8.dtsi
Normal file
@@ -0,0 +1,193 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interconnect/qcom,sun.h>
|
||||
|
||||
&tlmm {
|
||||
cnss_pins {
|
||||
cnss_wlan_en_active: cnss_wlan_en_active {
|
||||
mux {
|
||||
pins = "gpio16";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio16";
|
||||
drive-strength = <16>;
|
||||
output-high;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
cnss_wlan_en_sleep: cnss_wlan_en_sleep {
|
||||
mux {
|
||||
pins = "gpio16";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio16";
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
cnss_wlan_sw_ctrl: cnss_wlan_sw_ctrl {
|
||||
mux {
|
||||
pins = "gpio18";
|
||||
function = "wcn_sw_ctrl";
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
cnss_wlan_sw_ctrl_wl_cx: cnss_wlan_sw_ctrl_wl_cx {
|
||||
mux {
|
||||
pins = "gpio19";
|
||||
function = "wcn_sw";
|
||||
};
|
||||
};
|
||||
|
||||
cnss_host_sol_default: cnss_host_sol_default {
|
||||
mux {
|
||||
pins = "gpio202";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio202";
|
||||
drive-strength = <4>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&reserved_memory {
|
||||
cnss_wlan_mem: cnss_wlan_region {
|
||||
compatible = "shared-dma-pool";
|
||||
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
||||
reusable;
|
||||
alignment = <0x0 0x400000>;
|
||||
size = <0x0 0x2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
wlan_peach: qcom,cnss-peach@b0000000 {
|
||||
compatible = "qcom,cnss-peach";
|
||||
reg = <0xb0000000 0x10000>;
|
||||
reg-names = "smmu_iova_ipa";
|
||||
qcom,wlan-sw-ctrl-gpio = <&tlmm 19 0>;
|
||||
|
||||
supported-ids = <0x110E>;
|
||||
wlan-en-gpio = <&tlmm 16 0>;
|
||||
qcom,bt-en-gpio = <&pm8550ve_f_gpios 3 0>;
|
||||
qcom,sw-ctrl-gpio = <&tlmm 18 0>;
|
||||
wlan-host-sol-gpio = <&tlmm 202 0>;
|
||||
wlan-dev-sol-gpio = <&tlmm 203 0>;
|
||||
/* List of GPIOs to be setup for interrupt wakeup capable */
|
||||
mpm_wake_set_gpios = <18 19>;
|
||||
pinctrl-names = "wlan_en_active", "wlan_en_sleep", "sw_ctrl",
|
||||
"sw_ctrl_wl_cx", "sol_default";
|
||||
pinctrl-0 = <&cnss_wlan_en_active>;
|
||||
pinctrl-1 = <&cnss_wlan_en_sleep>;
|
||||
pinctrl-2 = <&cnss_wlan_sw_ctrl>;
|
||||
pinctrl-3 = <&cnss_wlan_sw_ctrl_wl_cx>;
|
||||
pinctrl-4 = <&cnss_host_sol_default>;
|
||||
qcom,wlan;
|
||||
qcom,wlan-rc-num = <0>;
|
||||
qcom,wlan-ramdump-dynamic = <0x780000>;
|
||||
cnss-enable-self-recovery;
|
||||
qcom,wlan-cbc-enabled;
|
||||
use-pm-domain;
|
||||
qcom,same-dt-multi-dev;
|
||||
/* For AOP communication, use direct QMP instead of mailbox */
|
||||
qcom,qmp = <&aoss_qmp>;
|
||||
msix-match-addr = <0x3000>;
|
||||
|
||||
vdd-wlan-io-supply = <&L3F>;
|
||||
qcom,vdd-wlan-io-config = <1800000 1800000 0 0 1>;
|
||||
vdd-wlan-io12-supply = <&L2F>;
|
||||
qcom,vdd-wlan-io12-config = <1200000 1200000 0 0 1>;
|
||||
vdd-wlan-aon-supply = <&S4D>;
|
||||
qcom,vdd-wlan-aon-config = <876000 1036000 0 0 1>;
|
||||
vdd-wlan-dig-supply = <&S5F>;
|
||||
qcom,vdd-wlan-dig-config = <876000 1000000 0 0 1>;
|
||||
vdd-wlan-rfa1-supply = <&S3G>;
|
||||
qcom,vdd-wlan-rfa1-config = <1860000 2000000 0 0 1>;
|
||||
vdd-wlan-rfa2-supply = <&S7I>;
|
||||
qcom,vdd-wlan-rfa2-config = <1312000 1340000 0 0 1>;
|
||||
vdd-wlan-ant-share-supply = <&L6K>;
|
||||
qcom,vdd-wlan-ant-share-config = <1800000 1860000 0 0 1>;
|
||||
|
||||
interconnects =
|
||||
<&pcie_noc MASTER_PCIE_0 &pcie_noc SLAVE_ANOC_PCIE_GEM_NOC>,
|
||||
<&gem_noc MASTER_ANOC_PCIE_GEM_NOC &mc_virt SLAVE_EBI1>;
|
||||
interconnect-names = "pcie_to_memnoc", "memnoc_to_ddr";
|
||||
|
||||
qcom,icc-path-count = <2>;
|
||||
qcom,bus-bw-cfg-count = <9>;
|
||||
qcom,bus-bw-cfg =
|
||||
/** ICC Path 1 **/
|
||||
<0 0>, /* no vote */
|
||||
/* idle: 0-18 Mbps snoc/anoc: 100 Mhz */
|
||||
<2250 1600000>,
|
||||
/* low: 18-60 Mbps snoc/anoc: 100 Mhz */
|
||||
<7500 1600000>,
|
||||
/* medium: 60-240 Mbps snoc/anoc: 100 Mhz */
|
||||
<30000 1600000>,
|
||||
/* high: 240-1200 Mbps snoc/anoc: 100 Mhz */
|
||||
<100000 1600000>,
|
||||
/* very high: > 1200 Mbps snoc/anoc: 403 Mhz */
|
||||
<175000 6448000>,
|
||||
/* ultra high: DBS mode snoc/anoc: 403 Mhz */
|
||||
<312500 6448000>,
|
||||
/* super high: DBS mode snoc/anoc: 533 Mhz */
|
||||
<587500 8528000>,
|
||||
/* low (latency critical): 18-60 Mbps snoc/anoc: 200 Mhz */
|
||||
<7500 3200000>,
|
||||
|
||||
/** ICC Path 2 **/
|
||||
<0 0>,
|
||||
/* idle: 0-18 Mbps ddr: 547.2 MHz */
|
||||
<2250 2188800>,
|
||||
/* low: 18-60 Mbps ddr: 547.2 MHz */
|
||||
<7500 2188800>,
|
||||
/* medium: 60-240 Mbps ddr: 547.2 MHz */
|
||||
<30000 2188800>,
|
||||
/* high: 240-1200 Mbps ddr: 547.2 MHz */
|
||||
<100000 2188800>,
|
||||
/* very high: > 1200 Mbps ddr: 1555 MHz */
|
||||
<175000 6220800>,
|
||||
/* ultra high: DBS mode ddr: 2092 MHz */
|
||||
<312500 8368000>,
|
||||
/* super high: DBS mode ddr: 3.2 GHz */
|
||||
<587500 12800000>,
|
||||
/* low (latency critical): 18-60 Mbps ddr: 547.2 MHz */
|
||||
<7500 2188800>;
|
||||
|
||||
qcom,pdc_init_table =
|
||||
"{class: wlan_pdc, ss: rf, res: s5f.m, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s5f.v, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s5f.v, upval: 876}",
|
||||
"{class: wlan_pdc, ss: rf, res: s5f.v, dwnval: 876}";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0_rp {
|
||||
cnss_pci0: cnss_pci0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
qcom,iommu-group = <&cnss_audio_iommu_group0>;
|
||||
memory-region = <&cnss_wlan_mem &cnss_pci0_iommu_region_partition>;
|
||||
|
||||
cnss_pci0_iommu_region_partition: cnss_pci0_iommu_region_partition {
|
||||
/* address-cells =3 size-cells=2 from sun-pcie.dtsi */
|
||||
iommu-addresses = <&cnss_pci0 0x0 0x0 0x0 0x0 0x88000000>,
|
||||
<&cnss_pci0 0x0 0x0 0xB0000000 0x0 0x50000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
18
qcom/opensource/wlan/wlan-devicetree/sun-peach-cnss.dts
Normal file
18
qcom/opensource/wlan/wlan-devicetree/sun-peach-cnss.dts
Normal file
@@ -0,0 +1,18 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "sun-peach-cnss.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Sun SoCs";
|
||||
compatible = "qcom,sun", "qcom,sunp";
|
||||
qcom,msm-id = <618 0x10000>, <618 0x20000>,
|
||||
<639 0x10000>, <639 0x20000>;
|
||||
qcom,board-id = <1 0>, <8 0>, <0x1000B 0>, <0x15 0>;
|
||||
};
|
||||
192
qcom/opensource/wlan/wlan-devicetree/sun-peach-cnss.dtsi
Normal file
192
qcom/opensource/wlan/wlan-devicetree/sun-peach-cnss.dtsi
Normal file
@@ -0,0 +1,192 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interconnect/qcom,sun.h>
|
||||
|
||||
&tlmm {
|
||||
cnss_pins {
|
||||
cnss_wlan_en_active: cnss_wlan_en_active {
|
||||
mux {
|
||||
pins = "gpio16";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio16";
|
||||
drive-strength = <16>;
|
||||
output-high;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
cnss_wlan_en_sleep: cnss_wlan_en_sleep {
|
||||
mux {
|
||||
pins = "gpio16";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio16";
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
cnss_wlan_sw_ctrl: cnss_wlan_sw_ctrl {
|
||||
mux {
|
||||
pins = "gpio18";
|
||||
function = "wcn_sw_ctrl";
|
||||
};
|
||||
};
|
||||
|
||||
cnss_wlan_sw_ctrl_wl_cx: cnss_wlan_sw_ctrl_wl_cx {
|
||||
mux {
|
||||
pins = "gpio19";
|
||||
function = "wcn_sw";
|
||||
};
|
||||
};
|
||||
|
||||
cnss_host_sol_default: cnss_host_sol_default {
|
||||
mux {
|
||||
pins = "gpio202";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio202";
|
||||
drive-strength = <4>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&reserved_memory {
|
||||
cnss_wlan_mem: cnss_wlan_region {
|
||||
compatible = "shared-dma-pool";
|
||||
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
||||
reusable;
|
||||
alignment = <0x0 0x400000>;
|
||||
size = <0x0 0x2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
wlan_peach: qcom,cnss-peach@b0000000 {
|
||||
compatible = "qcom,cnss-peach";
|
||||
reg = <0xb0000000 0x10000>;
|
||||
reg-names = "smmu_iova_ipa";
|
||||
qcom,wlan-sw-ctrl-gpio = <&tlmm 19 0>;
|
||||
|
||||
supported-ids = <0x110E>;
|
||||
wlan-en-gpio = <&tlmm 16 0>;
|
||||
qcom,bt-en-gpio = <&pm8550vs_f_gpios 3 0>;
|
||||
qcom,sw-ctrl-gpio = <&tlmm 18 0>;
|
||||
wlan-host-sol-gpio = <&tlmm 202 0>;
|
||||
wlan-dev-sol-gpio = <&tlmm 203 0>;
|
||||
/* List of GPIOs to be setup for interrupt wakeup capable */
|
||||
mpm_wake_set_gpios = <18 19>;
|
||||
pinctrl-names = "wlan_en_active", "wlan_en_sleep", "sw_ctrl",
|
||||
"sw_ctrl_wl_cx", "sol_default";
|
||||
pinctrl-0 = <&cnss_wlan_en_active>;
|
||||
pinctrl-1 = <&cnss_wlan_en_sleep>;
|
||||
pinctrl-2 = <&cnss_wlan_sw_ctrl>;
|
||||
pinctrl-3 = <&cnss_wlan_sw_ctrl_wl_cx>;
|
||||
pinctrl-4 = <&cnss_host_sol_default>;
|
||||
qcom,wlan;
|
||||
qcom,wlan-rc-num = <0>;
|
||||
qcom,wlan-ramdump-dynamic = <0x780000>;
|
||||
cnss-enable-self-recovery;
|
||||
qcom,wlan-cbc-enabled;
|
||||
use-pm-domain;
|
||||
qcom,same-dt-multi-dev;
|
||||
/* For AOP communication, use direct QMP instead of mailbox */
|
||||
qcom,qmp = <&aoss_qmp>;
|
||||
msix-match-addr = <0x3000>;
|
||||
|
||||
vdd-wlan-io-supply = <&L3F>;
|
||||
qcom,vdd-wlan-io-config = <1800000 1800000 0 0 1>;
|
||||
vdd-wlan-io12-supply = <&L2F>;
|
||||
qcom,vdd-wlan-io12-config = <1200000 1200000 0 0 1>;
|
||||
vdd-wlan-aon-supply = <&S4D>;
|
||||
qcom,vdd-wlan-aon-config = <876000 1036000 0 0 1>;
|
||||
vdd-wlan-dig-supply = <&S4J>;
|
||||
qcom,vdd-wlan-dig-config = <876000 1000000 0 0 1>;
|
||||
vdd-wlan-rfa1-supply = <&S3G>;
|
||||
qcom,vdd-wlan-rfa1-config = <1860000 2000000 0 0 1>;
|
||||
vdd-wlan-rfa2-supply = <&S7I>;
|
||||
qcom,vdd-wlan-rfa2-config = <1312000 1340000 0 0 1>;
|
||||
vdd-wlan-ant-share-supply = <&L6K>;
|
||||
qcom,vdd-wlan-ant-share-config = <1800000 1860000 0 0 1>;
|
||||
|
||||
interconnects =
|
||||
<&pcie_noc MASTER_PCIE_0 &pcie_noc SLAVE_ANOC_PCIE_GEM_NOC>,
|
||||
<&gem_noc MASTER_ANOC_PCIE_GEM_NOC &mc_virt SLAVE_EBI1>;
|
||||
interconnect-names = "pcie_to_memnoc", "memnoc_to_ddr";
|
||||
|
||||
qcom,icc-path-count = <2>;
|
||||
qcom,bus-bw-cfg-count = <9>;
|
||||
qcom,bus-bw-cfg =
|
||||
/** ICC Path 1 **/
|
||||
<0 0>, /* no vote */
|
||||
/* idle: 0-18 Mbps snoc/anoc: 100 Mhz */
|
||||
<2250 1600000>,
|
||||
/* low: 18-60 Mbps snoc/anoc: 100 Mhz */
|
||||
<7500 1600000>,
|
||||
/* medium: 60-240 Mbps snoc/anoc: 100 Mhz */
|
||||
<30000 1600000>,
|
||||
/* high: 240-1200 Mbps snoc/anoc: 100 Mhz */
|
||||
<100000 1600000>,
|
||||
/* very high: > 1200 Mbps snoc/anoc: 403 Mhz */
|
||||
<175000 6448000>,
|
||||
/* ultra high: DBS mode snoc/anoc: 403 Mhz */
|
||||
<312500 6448000>,
|
||||
/* super high: DBS mode snoc/anoc: 533 Mhz */
|
||||
<587500 8528000>,
|
||||
/* low (latency critical): 18-60 Mbps snoc/anoc: 200 Mhz */
|
||||
<7500 3200000>,
|
||||
|
||||
/** ICC Path 2 **/
|
||||
<0 0>,
|
||||
/* idle: 0-18 Mbps ddr: 547.2 MHz */
|
||||
<2250 2188800>,
|
||||
/* low: 18-60 Mbps ddr: 547.2 MHz */
|
||||
<7500 2188800>,
|
||||
/* medium: 60-240 Mbps ddr: 547.2 MHz */
|
||||
<30000 2188800>,
|
||||
/* high: 240-1200 Mbps ddr: 547.2 MHz */
|
||||
<100000 2188800>,
|
||||
/* very high: > 1200 Mbps ddr: 1555 MHz */
|
||||
<175000 6220800>,
|
||||
/* ultra high: DBS mode ddr: 2092 MHz */
|
||||
<312500 8368000>,
|
||||
/* super high: DBS mode ddr: 3.2 GHz */
|
||||
<587500 12800000>,
|
||||
/* low (latency critical): 18-60 Mbps ddr: 547.2 MHz */
|
||||
<7500 2188800>;
|
||||
|
||||
qcom,pdc_init_table =
|
||||
"{class: wlan_pdc, ss: rf, res: s4j.m, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s4j.v, enable: 1}",
|
||||
"{class: wlan_pdc, ss: rf, res: s4j.v, upval: 876}",
|
||||
"{class: wlan_pdc, ss: rf, res: s4j.v, dwnval: 876}";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0_rp {
|
||||
cnss_pci0: cnss_pci0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
qcom,iommu-group = <&cnss_audio_iommu_group0>;
|
||||
memory-region = <&cnss_wlan_mem &cnss_pci0_iommu_region_partition>;
|
||||
|
||||
cnss_pci0_iommu_region_partition: cnss_pci0_iommu_region_partition {
|
||||
/* address-cells =3 size-cells=2 from sun-pcie.dtsi */
|
||||
iommu-addresses = <&cnss_pci0 0x0 0x0 0x0 0x0 0x88000000>,
|
||||
<&cnss_pci0 0x0 0x0 0xB0000000 0x0 0x50000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user