replace common qcom sources with samsung ones

qcom/opensource/camera-kernel/Kconfig

@@ -117,3 +117,183 @@ config SPECTRA_SECURE_CAMNOC_REG_UPDATE
 		feature that allows the HLOS to configure
 		camnoc registers through HYP to avoid
 		potential security issues.
+
+config SAMSUNG_CAMERA
+	bool "enable samsung camera"
+	help
+	  This is enabling samsung camera feature.
+	  samsung specialized functions will be functional.
+
+config CAMERA_FRAME_CNT_DBG
+	bool "enable camera frame count debug"
+	help
+	  This is enabling frame count debug feature.
+	  camera frame count will be functional.
+
+config CAMERA_FRAME_CNT_CHECK
+	bool "enable frame count check feature"
+	help
+	  This is enabling frame count check to ensure that
+	  sensor streams at least one frame before stream off.
+
+config CAMERA_SYSFS_V2
+	bool "enable camera sysfs v2 module"
+	help
+	  This is enabling camera sysfs v2 module.
+	  camera sysfs v2 module will be functional.
+	  This module provide sysfs node for factory test.
+
+config SAMSUNG_REAR_DUAL
+	bool "enable rear dual"
+	help
+	  This is enabling samsung rear dual feature.
+	  device has at least two cameras facing rear.
+
+config SAMSUNG_REAR_TRIPLE
+	bool "enable rear triple"
+	help
+	  This is enabling samsung rear triple feature.
+	  device has at least three cameras facing rear.
+
+config SAMSUNG_REAR_QUADRA
+	bool "enable rear quadra"
+	help
+	  This is enabling samsung rear quadra feature.
+	  device has at least four cameras facing rear.
+
+config SAMSUNG_PMIC_FLASH
+	bool "enable samsung pmic flash"
+	help
+	  This is enabling samsung pmic flash feature.
+	  samsung specialized functions will be functional.
+
+config SAMSUNG_FRONT_EEPROM
+	bool "enable front eeprom"
+	help
+	  This is enabling front eeprom feature.
+
+config SENSOR_RETENTION
+	bool "enable sensor retention"
+	help
+	  This is enabling sensor retention feature.
+	  sensor retention will be functional.
+
+config SAMSUNG_DEBUG_HW_INFO
+	bool "enable sensor hw info debug"
+	help
+	  This is enabling feature to debug sensor hw information.
+	  sensor will provide api to debug hardware information.
+
+config USE_CAMERA_HW_BIG_DATA
+	bool "enable hardware big data"
+	help
+	  This is enabling feature to gather H/W big data.
+	  all sensor subdevices will provide error information
+	  related to H/W.
+
+config CAMERA_CDR_TEST
+	bool "enable CDR test"
+	help
+	  This is enabling CDR test feature.
+
+config CAMERA_HW_ERROR_DETECT
+	bool "enable HW error detect"
+	help
+	  This is enabling HW error detect.
+
+config SAMSUNG_ACTUATOR_READ_HALL_VALUE
+	bool "enable read hall value of actuator"
+	help
+	  This is enabling actuator read hall value feature.
+	  actuator will provide api to read hall value.
+
+config SAMSUNG_UW_CAMERA_ACTUATOR
+	bool "enable ultra-wide camera with actuator feature"
+	help
+	  This is enabling ultra-wide camera with actuator feature.
+
+config SAMSUNG_FRONT_CAMERA_ACTUATOR
+	bool "enable front camera with actuator feature"
+	help
+	  This is enabling front camera with actuator feature.
+
+config SAMSUNG_READ_BPC_FROM_OTP
+	bool "enable read BPC from OTP"
+	help
+	  This is enabling read BPC from OTP feature.
+
+config SAMSUNG_WACOM_NOTIFIER
+	bool "enable wacom notifier"
+	help
+	  This is enabling wacom notifier.
+
+config CAMERA_ADAPTIVE_MIPI
+	bool "enable adaptive mipi"
+	help
+	  This is enabling function for adaptive mipi.
+
+config SAMSUNG_DEBUG_SENSOR_I2C
+	bool "enable debug sensor i2c"
+	help
+	  This is enabling debug sensor i2c.
+
+config SEC_NE1Q_PROJECT
+	bool "enable model feature for ne1 project"
+	help
+	  This is enabling function for ne1 project.
+
+config SEC_NE2Q_PROJECT
+	bool "enable model feature for ne2 project"
+	help
+	  This is enabling function for ne2 project.
+
+config SEC_NE3Q_PROJECT
+	bool "enable model feature for ne3 project"
+	help
+	  This is enabling function for ne3 project.
+
+config SEC_PA1Q_PROJECT
+	bool "enable model feature for pa1 project"
+	help
+	  This is enabling function for pa1 project.
+
+config SEC_PA2Q_PROJECT
+	bool "enable model feature for pa2 project"
+	help
+	  This is enabling function for pa2 project.
+
+config SEC_PA3Q_PROJECT
+	bool "enable model feature for pa3 project"
+	help
+	  This is enabling function for pa3 project.
+
+config SEC_PSQ_PROJECT
+	bool "enable model feature for ps project"
+	help
+	  This is enabling function for ps project.
+
+config SEC_Q7Q_PROJECT
+	bool "enable model feature for q7 project"
+	help
+	  This is enabling function for q7 project.
+
+config SEC_Q7MQ_PROJECT
+	bool "enable model feature for q7m project"
+	help
+	  This is enabling function for q7m project.
+
+config SAMSUNG_LPAI_OIS
+	bool "enable LPAI OIS module"
+	help
+	  This is enabling LPAI(Low Power AI) OIS module.
+	  LPAI OIS module will be functional.
+	 
+config SAMSUNG_FRONT_TOP
+	bool "enable front top"
+	help
+	  This is enabling front top features.
+	  
+config SAMSUNG_FRONT_TOP_EEPROM
+	bool "enable front top eeprom"
+	help
+	  This is enabling front top eeprom.