samsung_sm8750/android_kernel_samsung_sm8750-devicetrees
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
f91aec16a02196fb2f2234ca9b99aaef34df81f0
android_kernel_samsung_sm87…/qcom/camera/kalama-camera-sensor-cdp.dtsi
kmiit 3c51dd18f2 Add 'qcom/camera/' from CAMERA.LA.5.0.r1-07500-pakala.0 of https://git.codelinaro.org/clo/la/platform/vendor/opensource/camera-devicetree 
git-subtree-dir: qcom/camera
git-subtree-mainline: 8263fe365e
git-subtree-split: a1378b76f0
2025-06-12 15:56:00 +08:00

870 lines
26 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/msm-camera.h>
&soc {
led_flash_triple_rear_wide: qcom,camera-flash1 {
cell-index = <1>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
led_flash_triple_rear_tele: qcom,camera-flash2 {
cell-index = <2>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
led_flash_triple_rear_ultrawide: qcom,camera-flash3 {
cell-index = <3>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
qcom,cam-res-mgr {
compatible = "qcom,cam-res-mgr";
status = "ok";
};
};
&cam_cci0 {
actuator_triple_uw: qcom,actuator0 {
cell-index = <0>;
compatible = "qcom,actuator";
cci-master = <CCI_MASTER_0>;
cam_vaf-supply = <&L7N>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <103000>;
status = "ok";
};
actuator_triple_wide: qcom,actuator1 {
cell-index = <1>;
compatible = "qcom,actuator";
cci-master = <CCI_MASTER_1>;
cam_vaf-supply = <&L7N>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <103000>;
status = "ok";
};
actuator_ois: qcom,actuator3 {
cell-index = <3>;
compatible = "qcom,actuator";
cci-master = <CCI_MASTER_0>;
cam_vaf-supply = <&L7N>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <103000>;
status = "ok";
};
actuator_hp1: qcom,actuator4 {
cell-index = <4>;
compatible = "qcom,actuator";
cci-master = <CCI_MASTER_1>;
cam_vaf-supply = <&L7N>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <103000>;
status = "ok";
};
ois0: qcom,ois0 {
cell-index = <9>;
compatible = "qcom,ois";
cci-master = <0>;
cam_vaf-supply = <&L7N>;
cam_v_custom2-supply = <&L4N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
regulator-names = "cam_vaf", "cam_v_custom2", "cam_clk";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000 2800000 0>;
rgltr-max-voltage = <2960000 2800000 0>;
rgltr-load-current = <103000 95000 0>;
gpios = <&tlmm 100 0>,
<&tlmm 116 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
clocks = <&camcc CAM_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
eeprom_tof1: qcom,eeprom0 {
cell-index = <0>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&S4G>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3N>;
cam_v_custom1-supply = <&L6N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig",
"cam_clk", "cam_vana", "cam_v_custom1", "cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1200000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1352000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 100 0>,
<&tlmm 116 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <CCI_MASTER_0>;
clocks = <&camcc CAM_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
eeprom_uw: qcom,eeprom1 {
cell-index = <1>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&L2N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L4N>;
cam_vaf-supply = <&L7N>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk",
"cam_vana","cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000>;
rgltr-load-current = <3000 644000 0 95000 103000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_active
&cam_sensor_active_rst1>;
pinctrl-1 = <&cam_sensor_mclk1_suspend
&cam_sensor_suspend_rst1>;
gpios = <&tlmm 101 0>,
<&tlmm 117 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET1";
cci-master = <CCI_MASTER_0>;
clocks = <&camcc CAM_CC_MCLK1_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
eeprom_wide: qcom,eeprom2 {
cell-index = <2>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L7M>;
cam_vaf-supply = <&L7N>;
cam_v_custom1-supply = <&L5M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2904000 2960000 1800000>;
rgltr-max-voltage = <1800000 1104000 0 2904000 2960000 1800000>;
rgltr-load-current = <3500 913200 0 91300 103000 63100>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2>;
gpios = <&tlmm 102 0>,
<&tlmm 118 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
cci-master = <CCI_MASTER_1>;
clocks = <&camcc CAM_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
eeprom_ois: qcom,eeprom6 {
cell-index = <6>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L7M>;
cam_vaf-supply = <&L7N>;
cam_v_custom1-supply = <&L5M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2904000 2960000 1800000>;
rgltr-max-voltage = <1800000 1104000 0 2904000 2960000 1800000>;
rgltr-load-current = <3500 913200 0 91300 103000 63100>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 100 0>,
<&tlmm 116 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <CCI_MASTER_0>;
clocks = <&camcc CAM_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
eeprom_hp1: qcom,eeprom7 {
cell-index = <7>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L6N>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig",
"cam_clk", "cam_vana", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 3304000 2904000>;
rgltr-max-voltage = <1800000 1104000 0 3304000 2904000>;
rgltr-load-current = <3500 913200 0 30000 91300>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2>;
gpios = <&tlmm 102 0>,
<&tlmm 118 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
cci-master = <CCI_MASTER_1>;
clocks = <&camcc CAM_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor7 {
cell-index = <7>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <0>;
eeprom-src = <&eeprom_tof1>;
sensor-position-roll = <270>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&S4G>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3N>;
cam_v_custom1-supply = <&L6N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig",
"cam_clk", "cam_vana", "cam_v_custom1", "cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1200000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1352000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 100 0>,
<&tlmm 116 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <0>;
clocks = <&camcc CAM_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor1 {
cell-index = <1>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <1>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_uw>;
actuator-src = <&actuator_triple_uw>;
led-flash-src = <&led_flash_triple_rear_ultrawide>;
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&L2N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L4N>;
cam_vaf-supply = <&L7N>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk",
"cam_vana","cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000>;
rgltr-load-current = <3000 644000 0 95000 103000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_active
&cam_sensor_active_rst1>;
pinctrl-1 = <&cam_sensor_mclk1_suspend
&cam_sensor_suspend_rst1>;
gpios = <&tlmm 101 0>,
<&tlmm 117 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET1";
cci-master = <CCI_MASTER_0>;
clocks = <&camcc CAM_CC_MCLK1_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor2 {
cell-index = <2>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <2>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_wide>;
actuator-src = <&actuator_triple_wide>;
led-flash-src = <&led_flash_triple_rear_wide>;
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L7M>;
cam_vaf-supply = <&L7N>;
cam_v_custom1-supply = <&L5M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2904000 2960000 1800000>;
rgltr-max-voltage = <1800000 1104000 0 2904000 2960000 1800000>;
rgltr-load-current = <3500 913200 0 91300 103000 63100>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2>;
gpios = <&tlmm 102 0>,
<&tlmm 118 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
cci-master = <CCI_MASTER_1>;
clocks = <&camcc CAM_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor9 {
cell-index = <9>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <0>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_ois>;
actuator-src = <&actuator_ois>;
ois-src = <&ois0>;
led-flash-src = <&led_flash_triple_rear_wide>;
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L7M>;
cam_vaf-supply = <&L7N>;
cam_v_custom1-supply = <&L5M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2904000 2960000 1800000>;
rgltr-max-voltage = <1800000 1104000 0 2904000 2960000 1800000>;
rgltr-load-current = <3500 913200 0 91300 103000 63100>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 100 0>,
<&tlmm 116 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <CCI_MASTER_0>;
clocks = <&camcc CAM_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor0 {
cell-index = <0>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <2>;
eeprom-src = <&eeprom_hp1>;
actuator-src= <&actuator_hp1>;
sensor-position-roll = <270>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L6N>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig",
"cam_clk", "cam_vana", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 3304000 2904000>;
rgltr-max-voltage = <1800000 1104000 0 3304000 2904000>;
rgltr-load-current = <3500 913200 0 30000 91300>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2>;
gpios = <&tlmm 102 0>,
<&tlmm 118 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
cci-master = <1>;
clocks = <&camcc CAM_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
&cam_cci1 {
actuator_triple_tele: qcom,actuator2{
cell-index = <2>;
compatible = "qcom,actuator";
cci-master = <CCI_MASTER_0>;
cam_vaf-supply = <&L7N>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <103000>;
status = "ok";
};
eeprom_tele: qcom,eeprom3 {
cell-index = <3>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&L2M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L4M>;
cam_vaf-supply = <&L7N>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk",
"cam_vana", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-max-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-load-current = <10000 140400 0 52000 103000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk3_active
&cam_sensor_active_rst3>;
pinctrl-1 = <&cam_sensor_mclk3_suspend
&cam_sensor_suspend_rst3>;
gpios = <&tlmm 103 0>,
<&tlmm 119 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK3",
"CAM_RESET3";
cci-master = <CCI_MASTER_0>;
clocks = <&camcc CAM_CC_MCLK3_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
eeprom_aon_front: qcom,eeprom4 {
cell-index = <4>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&L1M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_v_custom1-supply = <&L6M>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
"cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1056000 0 2800000 1800000>;
rgltr-max-voltage = <1800000 1056000 0 2800000 1800000>;
rgltr-load-current = <6000 454000 0 77900 29400>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk4_active
&cam_sensor_active_rst4>;
pinctrl-1 = <&cam_sensor_mclk4_suspend
&cam_sensor_suspend_rst4>;
gpios = <&tlmm 104 0>,
<&tlmm 120 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK4",
"CAM_RESET4";
cci-master = <CCI_MASTER_1>;
clocks = <&camcc CAM_CC_MCLK4_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor3 {
cell-index = <3>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <3>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_tele>;
actuator-src = <&actuator_triple_tele>;
led-flash-src = <&led_flash_triple_rear_tele>;
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&L2M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L4M>;
cam_vaf-supply = <&L7N>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk",
"cam_vana", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-max-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-load-current = <10000 140400 0 52000 103000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk3_active
&cam_sensor_active_rst3>;
pinctrl-1 = <&cam_sensor_mclk3_suspend
&cam_sensor_suspend_rst3>;
gpios = <&tlmm 103 0>,
<&tlmm 119 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK3",
"CAM_RESET3";
cci-master = <CCI_MASTER_0>;
clocks = <&camcc CAM_CC_MCLK3_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor4 {
cell-index = <4>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <4>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <0>;
eeprom-src = <&eeprom_aon_front>;
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&L1M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_v_custom1-supply = <&L6M>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
"cam_v_custom1";
rgltr-cntrl-support;
aon-camera-id = <AON_CAM1>;
rgltr-min-voltage = <1800000 1056000 0 2800000 1800000>;
rgltr-max-voltage = <1800000 1056000 0 2800000 1800000>;
rgltr-load-current = <6000 454000 0 77900 29400>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk4_active
&cam_sensor_active_rst4
&cam_sensor_ponv_active>;
pinctrl-1 = <&cam_sensor_mclk4_suspend
&cam_sensor_suspend_rst4
&cam_sensor_ponv_suspend>;
gpios = <&tlmm 104 0>,
<&tlmm 120 0>,
<&tlmm 206 0>;
gpio-reset = <1>;
gpio-standby = <2>;
gpio-req-tbl-num = <0 1 2>;
gpio-req-tbl-flags = <1 0 0>;
gpio-req-tbl-label = "CAMIF_MCLK4",
"CAM_RESET4",
"CAM_STANDBY";
cci-master = <CCI_MASTER_1>;
clocks = <&camcc CAM_CC_MCLK4_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
&cam_cci2 {
eeprom_tof2: qcom,eeprom5 {
cell-index = <5>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&S4G>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3N>;
cam_v_custom1-supply = <&L6N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana", "cam_v_custom1",
"cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1200000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1352000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk5_active
&cam_sensor_active_rst5>;
pinctrl-1 = <&cam_sensor_mclk5_suspend
&cam_sensor_suspend_rst5>;
gpios = <&tlmm 105 0>,
<&tlmm 69 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK5",
"CAM_RESET5";
cci-master = <CCI_MASTER_0>;
clocks = <&camcc CAM_CC_MCLK5_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor5 {
cell-index = <5>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <5>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_tof2>;
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&S4G>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3N>;
cam_v_custom1-supply = <&L6N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana", "cam_v_custom1",
"cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1200000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1352000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk5_active
&cam_sensor_active_rst5>;
pinctrl-1 = <&cam_sensor_mclk5_suspend
&cam_sensor_suspend_rst5>;
gpios = <&tlmm 105 0>,
<&tlmm 69 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK5",
"CAM_RESET5";
cci-master = <CCI_MASTER_0>;
clocks = <&camcc CAM_CC_MCLK5_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
&i3c0 {
se-clock-frequency = <100000000>;
i3c-scl-hz = <12500000>;
dfs-index = <0>;
i2c-scl-hz = <100000>;
status = "ok";
actuator_i3c_triple_wide: qcom,actuator@c {
cell-index = <8>;
compatible = "qcom,cam-i2c-actuator", "qcom,actuator";
reg = <0x0C 0x00 0x10>;
cam_vaf-supply = <&L7N>;
i3c-i2c-target;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <103000>;
status = "ok";
};
eeprom_i3c_wide: qcom,eeprom@50 {
cell-index = <8>;
reg = <0x50 0x00 0x10>;
compatible = "qcom,cam-i2c-eeprom", "qcom,eeprom";
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L7M>;
cam_vaf-supply = <&L7N>;
cam_v_custom1-supply = <&L5M>;
i3c-i2c-target;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2904000 2960000 1800000>;
rgltr-max-voltage = <1800000 1104000 0 2904000 2960000 1800000>;
rgltr-load-current = <3500 913200 0 91300 103000 63100>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2>;
gpios = <&tlmm 102 0>,
<&tlmm 118 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
clocks = <&camcc CAM_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor@34,36007660000 {
cell-index = <8>;
reg = <0x34 0x360 0x07660000>;
assigned-address = <0xa>;
scl-hz = <4000000>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <2>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
actuator-src = <&actuator_i3c_triple_wide>;
eeprom-src = <&eeprom_i3c_wide>;
led-flash-src = <&led_flash_triple_rear_wide>;
cam_vio-supply = <&L5N>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L7M>;
cam_vaf-supply = <&L7N>;
cam_v_custom1-supply = <&L5M>;
i3c-target;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2904000 2960000 1800000>;
rgltr-max-voltage = <1800000 1104000 0 2904000 2960000 1800000>;
rgltr-load-current = <3500 913200 0 91300 103000 63100>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2>;
gpios = <&tlmm 102 0>,
<&tlmm 118 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
clocks = <&camcc CAM_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
Reference in New Issue View Git Blame Copy Permalink