samsung_sm8750/android_kernel_samsung_sm8750-devicetrees
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
f919ae8d3f94f06102c3e00cd5b9a4ebbc607e7c
android_kernel_samsung_sm87…/sun-camera-sensor-cdp.dtsi
Lokesh Kumar Aakulu 29e9e7351f ARM: dts: msm: Reduce SE8 CLK to operate in lowSVS 
To handle power regression at SE8 end reduce
SCL clock, which makes the QUP clock domain to
run in LowSVS instead of SVS. And the theoritical
latency calculated for this change is minimal, around
0.3 msec for 200 xfers.

CRs-Fixed: 3859750
Change-Id: I256e745a6edbdb356b297cf4d8909ca214840120
Signed-off-by: Lokesh Kumar Aakulu <quic_lkumar@quicinc.com>
2024-07-18 09:37:08 -07:00

778 lines
23 KiB
Plaintext
Raw Blame History

#include <dt-bindings/msm-camera.h>
&soc {
led_flash_triple_rear_wide: qcom,camera-flash1 {
cell-index = <1>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
led_flash_triple_rear_tele: qcom,camera-flash2 {
cell-index = <2>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
led_flash_triple_rear_ultrawide: qcom,camera-flash3 {
cell-index = <3>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
led_flash_asc_rear: qcom,camera-flash4 {
cell-index = <4>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
led_flash_rear_aux: qcom,camera-flash5 {
cell-index = <5>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
qcom,cam-res-mgr {
compatible = "qcom,cam-res-mgr";
status = "ok";
};
};
&cam_cci0 {
actuator_triple_wide: qcom,actuator2 {
cell-index = <2>;
compatible = "qcom,actuator";
cci-master = <CCI_MASTER_1>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <119000>;
status = "ok";
};
actuator_rear_aux: qcom,actuator8 {
cell-index = <8>;
compatible = "qcom,actuator";
cci-master = <CCI_MASTER_0>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <100000>;
status = "ok";
};
ois_wide: qcom,ois0 {
cell-index = <2>;
compatible = "qcom,ois";
cci-master = <CCI_MASTER_1>;
cam_vio-supply = <&L5M>;
cam_vaf-supply = <&L7M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
regulator-names = "cam_vio","cam_vaf", "cam_clk";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2960000 0>;
rgltr-max-voltage = <1800000 2960000 0>;
rgltr-load-current = <4000 220000 0>;
status = "ok";
};
eeprom_tof1: qcom,eeprom7 {
cell-index = <7>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&S7I>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L5N>;
cam_v_custom1-supply = <&L7N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig",
"cam_clk", "cam_vana", "cam_v_custom1", "cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1256000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1340000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 89 0>,
<&tlmm 13 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
eeprom_rear_aux: qcom,eeprom8 {
cell-index = <8>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_vaf-supply = <&L7M>;
cam_v_custom1-supply = <&L6M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 2800000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 2800000>;
rgltr-load-current = <6400 850000 0 114500 100000 140000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 89 0>,
<&tlmm 13 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
eeprom_wide: qcom,eeprom2 {
cell-index = <2>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L6M>;
cam_vaf-supply = <&L7M>;
cam_v_custom1-supply = <&L3N>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
rgltr-load-current = <4000 913000 0 91400 119000 63100>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_active
&cam_sensor_active_rst1>;
pinctrl-1 = <&cam_sensor_mclk1_suspend
&cam_sensor_suspend_rst1>;
gpios = <&tlmm 90 0>,
<&tlmm 15 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET1";
cci-master = <CCI_MASTER_1>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK1_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor7 {
cell-index = <7>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <0>;
eeprom-src = <&eeprom_tof1>;
sensor-position-roll = <270>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&S7I>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L5N>;
cam_v_custom1-supply = <&L7N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig",
"cam_clk", "cam_vana", "cam_v_custom1", "cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1256000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1340000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 89 0>,
<&tlmm 13 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor2 {
cell-index = <2>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <1>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_wide>;
ois-src = <&ois_wide>;
actuator-src = <&actuator_triple_wide>;
led-flash-src = <&led_flash_triple_rear_wide>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L6M>;
cam_vaf-supply = <&L7M>;
cam_v_custom1-supply = <&L3N>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
rgltr-load-current = <4000 913000 0 91400 119000 63100>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_active
&cam_sensor_active_rst1>;
pinctrl-1 = <&cam_sensor_mclk1_suspend
&cam_sensor_suspend_rst1>;
gpios = <&tlmm 90 0>,
<&tlmm 15 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET1";
cci-master = <CCI_MASTER_1>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK1_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor8 {
cell-index = <8>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <0>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_rear_aux>;
actuator-src = <&actuator_rear_aux>;
led-flash-src = <&led_flash_rear_aux>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_vaf-supply = <&L7M>;
cam_v_custom1-supply = <&L6M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 2800000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 2800000>;
rgltr-load-current = <6400 850000 0 114500 100000 140000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 89 0>,
<&tlmm 13 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
&cam_cci1 {
actuator_triple_tele: qcom,actuator3{
cell-index = <3>;
compatible = "qcom,actuator";
cci-master = <CCI_MASTER_0>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <100000>;
status = "ok";
};
eeprom_tele: qcom,eeprom3 {
cell-index = <3>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L2M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L4M>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk",
"cam_vana", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-max-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-load-current = <4000 260700 0 67700 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk3_active
&cam_sensor_active_rst3>;
pinctrl-1 = <&cam_sensor_mclk3_suspend
&cam_sensor_suspend_rst3>;
gpios = <&tlmm 92 0>,
<&tlmm 109 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK3",
"CAM_RESET3";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK3_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor3 {
cell-index = <3>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <3>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_tele>;
actuator-src = <&actuator_triple_tele>;
led-flash-src = <&led_flash_triple_rear_tele>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L2M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L4M>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk",
"cam_vana", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-max-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-load-current = <4000 260700 0 67700 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk3_active
&cam_sensor_active_rst3>;
pinctrl-1 = <&cam_sensor_mclk3_suspend
&cam_sensor_suspend_rst3>;
gpios = <&tlmm 92 0>,
<&tlmm 109 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK3",
"CAM_RESET3";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK3_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
&cam_cci2 {
eeprom_tof2: qcom,eeprom5 {
cell-index = <5>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&S7I>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L5N>;
cam_v_custom1-supply = <&L7N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_v_custom1", "cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1256000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1340000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk5_active
&cam_sensor_active_rst5>;
pinctrl-1 = <&cam_sensor_mclk5_suspend
&cam_sensor_suspend_rst5>;
gpios = <&tlmm 94 0>,
<&tlmm 110 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK5",
"CAM_RESET5";
cci-master = <CCI_MASTER_1>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK5_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor5 {
cell-index = <5>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <5>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_tof2>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&S7I>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L5N>;
cam_v_custom1-supply = <&L7N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_v_custom1", "cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1256000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1340000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk5_active
&cam_sensor_active_rst5>;
pinctrl-1 = <&cam_sensor_mclk5_suspend
&cam_sensor_suspend_rst5>;
gpios = <&tlmm 94 0>,
<&tlmm 110 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK5",
"CAM_RESET5";
cci-master = <CCI_MASTER_1>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK5_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
&qupv3_se9_i2c {
status = "ok";
qcom,high-perf;
qcom,clk-freq-out = <1000000>;
qcom,pm-ctrl-client;
eeprom_asc_front: qcom,eeprom1 {
cell-index = <4>;
reg = <0x58>;
compatible = "qcom,cam-i2c-eeprom";
cam_vio-supply = <&L1I>;
cam_vdig-supply = <&L2N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L6N>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana";
rgltr-cntrl-support;
rgltr-min-voltage = <1200000 1104000 0 2800000>;
rgltr-max-voltage = <1200000 1104000 0 2800000>;
rgltr-load-current = <3000 283000 0 50000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk4_active
&cam_sensor_active_rst4>;
pinctrl-1 = <&cam_sensor_mclk4_suspend
&cam_sensor_suspend_rst4>;
gpios = <&tlmm 93 0>,
<&tlmm 7 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK4",
"CAM_RESET4";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK4_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor1 {
cell-index = <4>;
reg = <0x22>;
compatible = "qcom,cam-i2c-sensor";
csiphy-sd-index = <4>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <0>;
eeprom-src = <&eeprom_asc_front>;
cam_vio-supply = <&L1I>;
cam_vdig-supply = <&L2N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L6N>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana";
rgltr-cntrl-support;
aon-camera-id = <AON_CAM1>;
rgltr-min-voltage = <1200000 1104000 0 2800000>;
rgltr-max-voltage = <1200000 1104000 0 2800000>;
rgltr-load-current = <3000 283000 0 50000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk4_active
&cam_sensor_active_rst4>;
pinctrl-1 = <&cam_sensor_mclk4_suspend
&cam_sensor_suspend_rst4>;
gpios = <&tlmm 93 0>,
<&tlmm 7 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK4",
"CAM_RESET4";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK4_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
&i3c3 {
se-clock-frequency = <64000000>;
i3c-scl-hz = <8300000>;
dfs-index = <0>;
i2c-scl-hz = <1000000>;
qcom,pm-ctrl-client;
status = "ok";
actuator_UW_asc_rear: qcom,actuator@c {
cell-index = <1>;
compatible = "qcom,cam-i2c-actuator";
reg = <0x0C 0x00 0x10>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <100000>;
status = "ok";
};
eeprom_asc_rear: qcom,eeprom@50 {
cell-index = <6>;
reg = <0x50 0x00 0x10>;
compatible = "qcom,cam-i2c-eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_v_custom1-supply = <&L4N>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
"cam_v_custom1", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
rgltr-load-current = <6000 454000 0 77900 29400 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2>;
gpios = <&tlmm 91 0>,
<&tlmm 3 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
eeprom_i3c_UltraWide: qcom,eeprom@52 {
cell-index = <1>;
reg = <0x52 0x00 0x10>;
compatible = "qcom,cam-i2c-eeprom";
cam_vio-supply = <&L1I>;
cam_vdig-supply = <&L1M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
"cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1200000 1104000 0 2800000 2960000>;
rgltr-max-voltage = <1200000 1104000 0 2800000 2960000>;
rgltr-load-current = <3000 355000 0 95000 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2>;
gpios = <&tlmm 91 0>,
<&tlmm 3 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor@33,36008580000 {
cell-index = <1>;
reg = <0x33 0x360 0x08580000>;
assigned-address = <0xa>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <2>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_i3c_UltraWide>;
actuator-src = <&actuator_UW_asc_rear>;
led-flash-src = <&led_flash_triple_rear_ultrawide>;
cam_vio-supply = <&L1I>;
cam_vdig-supply = <&L1M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
"cam_vaf";
rgltr-cntrl-support;
aon-camera-id = <AON_CAM2>;
i3c-target;
rgltr-min-voltage = <1200000 1104000 0 2800000 2960000>;
rgltr-max-voltage = <1200000 1104000 0 2800000 2960000>;
rgltr-load-current = <3000 355000 0 95000 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2
&cam_sensor_i3cSelect_active>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2
&cam_sensor_i3cSelect_suspend>;
gpios = <&tlmm 91 0>,
<&tlmm 3 0>,
<&tlmm 6 0>;
gpio-reset = <1>;
gpio-custom1 = <2>;
gpio-req-tbl-num = <0 1 2>;
gpio-req-tbl-flags = <1 0 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2",
"CAM_I3CSELECT";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor@10 {
cell-index = <6>;
reg = <0x10 0x00 0x10>;
compatible = "qcom,cam-i2c-sensor";
csiphy-sd-index = <2>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_asc_rear>;
actuator-src = <&actuator_UW_asc_rear>;
led-flash-src = <&led_flash_asc_rear>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_v_custom1-supply = <&L4N>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
"cam_v_custom1", "cam_vaf";
rgltr-cntrl-support;
aon-camera-id = <AON_CAM2>;
rgltr-min-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
rgltr-load-current = <6000 454000 0 77900 29400 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2
&cam_sensor_ponv_rear_active>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2
&cam_sensor_ponv_rear_suspend>;
gpios = <&tlmm 91 0>,
<&tlmm 3 0>,
<&tlmm 2 0>;
gpio-reset = <1>;
gpio-standby = <2>;
gpio-req-tbl-num = <0 1 2>;
gpio-req-tbl-flags = <1 0 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2",
"CAM_STANDBY";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
Reference in New Issue View Git Blame Copy Permalink