Files
android_kernel_samsung_sm87…/qcom/tuna-pm7550ba.dtsi
Uttkarsh Aggarwal f31c552815 ARM: dts: msm: Add eUSB2 repeater nodes for Tuna MTP
Add the eUSB2 repeater node and references for PM7550BA.

Note: PM7550BA will be part of MTP platform.
Change-Id: I6fff82d33434306106ae6ce390f322c7a478e680
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
2024-11-21 17:46:11 +05:30

273 lines
5.1 KiB
Plaintext

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include "pm7550ba.dtsi"
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/iio/qcom,spmi-adc5-gen3-pm7550ba.h>
/ {
qcom,pmic-id-size = <8>;
qcom,pmic-id = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x4C>;
};
&spmi0_debug_bus {
qcom,pm7550ba-debug@7 {
compatible = "qcom,spmi-pmic";
reg = <7 SPMI_USID>;
#address-cells = <2>;
#size-cells = <0>;
qcom,can-sleep;
};
};
&pmic_glink_debug {
/* Primary SPMI bus */
glink_debug_spmi0: spmi@0 {
reg = <0>;
#address-cells = <2>;
#size-cells = <0>;
qcom,pm7550ba-debug@7 {
compatible = "qcom,spmi-pmic";
reg = <7 SPMI_USID>;
qcom,can-sleep;
};
};
i2c@104 {
reg = <0x104>; /* I2C instance 4 in ADSP for SE5 */
#address-cells = <1>;
#size-cells = <0>;
qcom,bus-type = "i2c";
qcom,smb1398@34 {
compatible = "qcom,i2c-pmic";
reg = <0x34>;
qcom,can-sleep;
};
};
/* SPMI bridge bus 1 with SMB1510 device */
spmi@200 {
reg = <0x200>;
#address-cells = <2>;
#size-cells = <0>;
qcom,bus-type = "spmi";
qcom,smb1510@d {
compatible = "qcom,spmi-pmic";
reg = <13 SPMI_USID>;
qcom,can-sleep;
};
};
};
&pmic_glink_adc {
status = "ok";
smb1398_1_iin {
reg = <0x1043401>;
label = "smb1393_1_iin";
};
smb1398_1_ichg {
reg = <0x1043402>;
label = "smb1393_1_ichg";
};
smb1398_1_die_temp {
reg = <0x1043403>;
label = "smb1393_1_die_temp";
};
};
&pmk8550_vadc {
pinctrl-0 = <&sys_therm_7_gpio6_default &sys_therm_6_gpio7_default>;
pinctrl-names = "default";
/* PM7550BA Channel nodes */
pm7550ba_offset_ref {
reg = <PM7550BA_ADC5_GEN3_OFFSET_REF>;
label = "pm7550ba_offset_ref";
qcom,pre-scaling = <1 1>;
};
pm7550ba_vref_1p25 {
reg = <PM7550BA_ADC5_GEN3_1P25VREF>;
label = "pm7550ba_vref_1p25";
qcom,pre-scaling = <1 1>;
};
pm7550ba_die_temp {
reg = <PM7550BA_ADC5_GEN3_DIE_TEMP>;
label = "pm7550ba_die_temp";
qcom,pre-scaling = <1 1>;
};
pm7550ba_vph_pwr {
reg = <PM7550BA_ADC5_GEN3_VPH_PWR>;
label = "pm7550ba_vph_pwr";
qcom,pre-scaling = <1 3>;
};
pm7550ba_chg_temp {
reg = <PM7550BA_ADC5_GEN3_CHG_TEMP_V>;
label = "pm7550ba_chg_temp";
};
pm7550ba_iin_fb {
reg = <PM7550BA_ADC5_GEN3_IIN_FB>;
label = "pm7550ba_iin_fb";
};
pm7550ba_ichg_fb {
reg = <PM7550BA_ADC5_GEN3_ICHG_FB>;
label = "pm7550ba_ichg_fb";
};
pm7550ba_sys_therm_7 {
reg = <PM7550BA_ADC5_GEN3_AMUX_THM6_GPIO6_100K_PU>;
label = "pm7550ba_sys_therm_7";
qcom,adc-tm-type = <1>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pm7550ba_sys_therm_8 {
reg = <PM7550BA_ADC5_GEN3_AMUX_THM4_USB_THERM_100K_PU>;
label = "pm7550ba_sys_therm_8";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
qcom,adc-tm-type = <1>;
};
pm7550ba_batt_therm {
reg = <PM7550BA_ADC5_GEN3_AMUX_THM1_BATT_THERM_100K_PU>;
label = "pm7550ba_batt_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
qcom,scale-fn-type = <ADC_SCALE_HW_CALIB_PM5_GEN3_BATT_THERM_100K>;
};
};
&pm7550ba_vib {
status = "okay";
};
&pm7550ba_amoled {
status = "okay";
};
&pm7550ba_tz {
io-channels = <&pmk8550_vadc PM7550BA_ADC5_GEN3_DIE_TEMP>;
io-channel-names = "thermal";
};
&battery_charger {
qcom,thermal-mitigation-step = <500000>;
#cooling-cells = <2>;
};
&pm7550ba_gpios {
sys_therm_7_gpio6 {
sys_therm_7_gpio6_default: sys_therm_7_gpio6_default {
pins = "gpio6";
bias-high-impedance;
};
};
};
&thermal_zones {
sys-therm-7 {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8550_vadc PM7550BA_ADC5_GEN3_AMUX_THM6_GPIO6_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
sys-therm-8 {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8550_vadc PM7550BA_ADC5_GEN3_AMUX_THM4_USB_THERM_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
&pm7550ba_bcl {
nvmem-cells = <&sm1510_present>;
nvmem-cell-names = "sm1510_present";
};
&thermal_zones {
pm7550ba-2s-ibat-lvl0 {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm7550ba_bcl 8>;
trips {
ibat_2s_lvl0: ibat-2s-lvl0 {
temperature = <5000>;
hysteresis = <200>;
type = "passive";
};
};
};
pm7550ba-2s-ibat-lvl1 {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm7550ba_bcl 9>;
trips {
ibat_2s_lvl1: ibat-2s-lvl1 {
temperature = <7000>;
hysteresis = <200>;
type = "passive";
};
};
};
};
&pm7550ba_eusb2_repeater {
vdd18-supply = <&L7B>;
vdd3-supply = <&L17B>;
status = "ok";
};
&eusb2_phy0 {
dummy-supply = <&pm7550ba_eusb2_repeater>;
usb-repeater = <&pm7550ba_eusb2_repeater>;
};