eca997e3cb
Pages are getting allocated from Movable zone even though they are requested from Normal zone. Disable movable zone as work around until issue is fixed. Change-Id: Ib2f799ec36ef969368410fe8e86f92441ad0b81b Signed-off-by: Srinivasarao Pathipati <quic_c_spathi@quicinc.com>
2578 lines
60 KiB
Plaintext
2578 lines
60 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/qcom,rpmh.h>
|
|
#include <dt-bindings/clock/qcom,sm4450-camcc.h>
|
|
#include <dt-bindings/clock/qcom,sm4450-dispcc.h>
|
|
#include <dt-bindings/clock/qcom,sm4450-gcc.h>
|
|
#include <dt-bindings/clock/qcom,sm4450-gpucc.h>
|
|
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
|
|
#include <dt-bindings/soc/qcom,ipcc.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interconnect/qcom,icc.h>
|
|
#include <dt-bindings/interconnect/qcom,ravelin.h>
|
|
#include <dt-bindings/regulator/qcom,rpmh-regulator-levels.h>
|
|
#include <dt-bindings/spmi/spmi.h>
|
|
|
|
/ {
|
|
model = "Qualcomm Technologies, Inc. Ravelin";
|
|
compatible = "qcom,ravelin";
|
|
qcom,msm-id = <568 0x10000>;
|
|
interrupt-parent = <&intc>;
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
chosen: chosen {
|
|
stdout-path = "/soc/qcom,qup_uart@a88000:115200n8";
|
|
bootargs = "console=ttyMSM0,115200n8 loglevel=6 log_buf_len=256K kernel.panic_on_rcu_stall=1 loop.max_part=7 pcie_ports=compat kasan=off rcupdate.rcu_expedited=1 rcu_nocbs=0-7 ftrace_dump_on_oops pstore.compress=none kpti=0 swiotlb=noforce cgroup.memory=nokmem,nosocket kswapd_per_node=2 slub_debug=- allow_file_spec_access cpufreq.default_governor=performance transparent_hugepage=never can.stats_timer=0 disable_dma32=on android12_only.will_be_removed_soon.memblock_nomap_remove=on pcie_ports=compat";
|
|
};
|
|
|
|
memory { device_type = "memory"; reg = <0 0 0 0>; };
|
|
|
|
ddr-regions { };
|
|
|
|
reserved_memory: reserved-memory { };
|
|
|
|
mem-offline {
|
|
compatible = "qcom,mem-offline";
|
|
offline-sizes = <0x1 0x40000000 0x0 0x40000000>,
|
|
<0x1 0xc0000000 0x0 0x80000000>,
|
|
<0x2 0xc0000000 0x1 0x40000000>;
|
|
granule = <512>;
|
|
mboxes = <&qmp_aop 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
aliases: aliases {
|
|
serial0 = &qupv3_se7_2uart; /* Debug UART */
|
|
serial1 = &qupv3_se0_2uart; /* HST debug UART */
|
|
hsuart0 = &qupv3_se2_4uart;
|
|
ufshc1 = &ufshc_mem; /* Embedded UFS Slot */
|
|
mmc0 = &sdhc_1; /*SDC1 eMMC slot*/
|
|
mmc1 = &sdhc_2; /* SDC2 SD card slot */
|
|
};
|
|
|
|
mmio_sram: mmio-sram@17D09100 {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
compatible = "mmio-sram";
|
|
reg = <0x0 0x17D09100 0x0 0x200>;
|
|
ranges = <0x0 0x0 0x0 0x17D09100 0x0 0x200>;
|
|
|
|
cpu_scmi_lpri: scmi-shmem@0 {
|
|
compatible = "arm,scmi-shmem";
|
|
reg = <0x0 0x0 0x0 0x200>;
|
|
};
|
|
};
|
|
|
|
firmware: firmware {};
|
|
|
|
cpus {
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
CPU0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x0>;
|
|
capacity-dmips-mhz = <1024>;
|
|
dynamic-power-coefficient = <100>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&SILVER_CPU_OFF &SILVER_CPU_RAIL_OFF>;
|
|
power-domains = <&CPU_PD0>;
|
|
power-domain-names = "psci";
|
|
qcom,freq-domain = <&cpufreq_hw 0 8>;
|
|
next-level-cache = <&L2_0>;
|
|
#cooling-cells = <2>;
|
|
L2_0: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
|
|
L3_0: l3-cache {
|
|
compatible = "cache";
|
|
cache-level = <3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
CPU1: cpu@100 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x100>;
|
|
capacity-dmips-mhz = <1024>;
|
|
dynamic-power-coefficient = <100>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&SILVER_CPU_OFF &SILVER_CPU_RAIL_OFF>;
|
|
power-domains = <&CPU_PD1>;
|
|
power-domain-names = "psci";
|
|
qcom,freq-domain = <&cpufreq_hw 0 8>;
|
|
next-level-cache = <&L2_1>;
|
|
#cooling-cells = <2>;
|
|
L2_1: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU2: cpu@200 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x200>;
|
|
capacity-dmips-mhz = <1024>;
|
|
dynamic-power-coefficient = <100>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&SILVER_CPU_OFF &SILVER_CPU_RAIL_OFF>;
|
|
power-domains = <&CPU_PD2>;
|
|
power-domain-names = "psci";
|
|
qcom,freq-domain = <&cpufreq_hw 0 8>;
|
|
next-level-cache = <&L2_2>;
|
|
#cooling-cells = <2>;
|
|
L2_2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU3: cpu@300 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x300>;
|
|
capacity-dmips-mhz = <1024>;
|
|
dynamic-power-coefficient = <100>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&SILVER_CPU_OFF &SILVER_CPU_RAIL_OFF>;
|
|
power-domains = <&CPU_PD3>;
|
|
power-domain-names = "psci";
|
|
qcom,freq-domain = <&cpufreq_hw 0 8>;
|
|
next-level-cache = <&L2_3>;
|
|
#cooling-cells = <2>;
|
|
L2_3: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU4: cpu@400 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x400>;
|
|
capacity-dmips-mhz = <1024>;
|
|
dynamic-power-coefficient = <100>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&SILVER_CPU_OFF &SILVER_CPU_RAIL_OFF>;
|
|
power-domains = <&CPU_PD4>;
|
|
power-domain-names = "psci";
|
|
next-level-cache = <&L2_4>;
|
|
#cooling-cells = <2>;
|
|
qcom,freq-domain = <&cpufreq_hw 0 8>;
|
|
L2_4: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU5: cpu@500 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x500>;
|
|
capacity-dmips-mhz = <1024>;
|
|
dynamic-power-coefficient = <100>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&SILVER_CPU_OFF &SILVER_CPU_RAIL_OFF>;
|
|
power-domains = <&CPU_PD5>;
|
|
power-domain-names = "psci";
|
|
qcom,freq-domain = <&cpufreq_hw 0 8>;
|
|
next-level-cache = <&L2_5>;
|
|
#cooling-cells = <2>;
|
|
L2_5: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU6: cpu@600 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x600>;
|
|
capacity-dmips-mhz = <1945>;
|
|
dynamic-power-coefficient = <483>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_CPU_OFF &GOLD_CPU_RAIL_OFF>;
|
|
power-domains = <&CPU_PD6>;
|
|
power-domain-names = "psci";
|
|
qcom,freq-domain = <&cpufreq_hw 1 8>;
|
|
next-level-cache = <&L2_6>;
|
|
#cooling-cells = <2>;
|
|
L2_6: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU7: cpu@700 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x700>;
|
|
capacity-dmips-mhz = <1945>;
|
|
dynamic-power-coefficient = <483>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_CPU_OFF &GOLD_CPU_RAIL_OFF>;
|
|
power-domains = <&CPU_PD7>;
|
|
power-domain-names = "psci";
|
|
qcom,freq-domain = <&cpufreq_hw 1 8>;
|
|
next-level-cache = <&L2_7>;
|
|
#cooling-cells = <2>;
|
|
L2_7: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
cpu-map {
|
|
cluster0 {
|
|
core0 {
|
|
cpu = <&CPU0>;
|
|
};
|
|
|
|
core1 {
|
|
cpu = <&CPU1>;
|
|
};
|
|
|
|
core2 {
|
|
cpu = <&CPU2>;
|
|
};
|
|
|
|
core3 {
|
|
cpu = <&CPU3>;
|
|
};
|
|
|
|
core4 {
|
|
cpu = <&CPU4>;
|
|
};
|
|
|
|
core5 {
|
|
cpu = <&CPU5>;
|
|
};
|
|
};
|
|
|
|
cluster1 {
|
|
core0 {
|
|
cpu = <&CPU6>;
|
|
};
|
|
|
|
core1 {
|
|
cpu = <&CPU7>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
idle-states {
|
|
entry-method = "psci";
|
|
|
|
SILVER_CPU_OFF: silver-c3 { /* C3 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "pc";
|
|
entry-latency-us = <350>;
|
|
exit-latency-us = <900>;
|
|
min-residency-us = <1774>;
|
|
arm,psci-suspend-param = <0x40000003>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
SILVER_CPU_RAIL_OFF: silver-c4 { /* C4 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "rail-pc";
|
|
entry-latency-us = <800>;
|
|
exit-latency-us = <750>;
|
|
min-residency-us = <4090>;
|
|
arm,psci-suspend-param = <0x40000004>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_CPU_OFF: gold-c3 { /* C3 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "pc";
|
|
entry-latency-us = <400>;
|
|
exit-latency-us = <1550>;
|
|
min-residency-us = <2207>;
|
|
arm,psci-suspend-param = <0x40000003>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_CPU_RAIL_OFF: gold-c4 { /* C4 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "rail-pc";
|
|
entry-latency-us = <600>;
|
|
exit-latency-us = <1550>;
|
|
min-residency-us = <4791>;
|
|
arm,psci-suspend-param = <0x40000004>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
CLUSTER_OFF: cluster-d4 { /* D4 */
|
|
compatible = "domain-idle-state";
|
|
idle-state-name = "l3-off";
|
|
entry-latency-us = <1050>;
|
|
exit-latency-us = <2500>;
|
|
min-residency-us = <5309>;
|
|
arm,psci-suspend-param = <0x41000044>;
|
|
};
|
|
|
|
CX_RET: cx-ret { /* Cx Ret */
|
|
compatible = "domain-idle-state";
|
|
idle-state-name = "cx-ret";
|
|
entry-latency-us = <1561>;
|
|
exit-latency-us = <2801>;
|
|
min-residency-us = <8550>;
|
|
arm,psci-suspend-param = <0x41003344>;
|
|
};
|
|
};
|
|
|
|
soc: soc { };
|
|
|
|
};
|
|
|
|
#include "msm-arm-smmu-ravelin.dtsi"
|
|
#include "ravelin-dma-heaps.dtsi"
|
|
#include "ravelin-reserved-memory.dtsi"
|
|
#include "ravelin-dma-heaps.dtsi"
|
|
#include "ravelin-usb.dtsi"
|
|
#include "ravelin-coresight.dtsi"
|
|
#include "ravelin-debug.dtsi"
|
|
#include "parrot-walt.dtsi"
|
|
|
|
&reserved_memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
/* global autoconfigured region for contiguous allocations */
|
|
system_cma: linux,cma {
|
|
compatible = "shared-dma-pool";
|
|
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
|
reusable;
|
|
alignment = <0x0 0x400000>;
|
|
size = <0x0 0x2000000>;
|
|
linux,cma-default;
|
|
};
|
|
|
|
ramoops_mem: ramoops_region {
|
|
alloc-ranges = <0x0 0x00000000 0xffffffff 0xffffffff>;
|
|
size = <0x0 0x200000>;
|
|
no-map;
|
|
};
|
|
|
|
kinfo_mem: debug_kinfo_region {
|
|
alloc-ranges = <0x0 0x00000000 0xffffffff 0xffffffff>;
|
|
size = <0x0 0x1000>;
|
|
no-map;
|
|
};
|
|
|
|
va_md_mem: va_md_mem_region {
|
|
compatible = "shared-dma-pool";
|
|
alloc-ranges = <0x1 0x00000000 0xfffffffe 0xffffffff>;
|
|
reusable;
|
|
size = <0 0x1000000>;
|
|
};
|
|
|
|
user_contig_mem: user_contig_region {
|
|
compatible = "shared-dma-pool";
|
|
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
|
reusable;
|
|
alignment = <0x0 0x400000>;
|
|
size = <0x0 0x1000000>;
|
|
};
|
|
|
|
qseecom_mem: qseecom_region {
|
|
compatible = "shared-dma-pool";
|
|
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
|
reusable;
|
|
alignment = <0x0 0x400000>;
|
|
size = <0x0 0x1400000>;
|
|
};
|
|
|
|
qseecom_ta_mem: qseecom_ta_region {
|
|
compatible = "shared-dma-pool";
|
|
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
|
reusable;
|
|
alignment = <0x0 0x400000>;
|
|
size = <0x0 0x1000000>;
|
|
};
|
|
|
|
adsp_mem_heap: adsp_heap_region {
|
|
compatible = "shared-dma-pool";
|
|
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
|
reusable;
|
|
alignment = <0x0 0x400000>;
|
|
size = <0x0 0xC00000>;
|
|
};
|
|
|
|
audio_cma_mem: audio_cma_region {
|
|
compatible = "shared-dma-pool";
|
|
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
|
reusable;
|
|
alignment = <0x0 0x400000>;
|
|
size = <0x0 0x1C00000>;
|
|
};
|
|
|
|
non_secure_display_memory: non_secure_display_region {
|
|
compatible = "shared-dma-pool";
|
|
reusable;
|
|
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
|
size = <0x0 0x5c00000>;
|
|
alignment = <0x0 0x400000>;
|
|
};
|
|
};
|
|
|
|
&firmware {
|
|
qcom_scm {
|
|
compatible = "qcom,scm";
|
|
qcom,dload-mode = <&tcsr 0x13000>;
|
|
};
|
|
|
|
qtee_shmbridge {
|
|
compatible = "qcom,tee-shared-memory-bridge";
|
|
};
|
|
|
|
qcom_smcinvoke {
|
|
compatible = "qcom,smcinvoke";
|
|
};
|
|
|
|
};
|
|
|
|
&soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0 0xffffffff>;
|
|
compatible = "simple-bus";
|
|
|
|
intc: interrupt-controller@17200000 {
|
|
compatible = "arm,gic-v3";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
#redistributor-regions = <1>;
|
|
redistributor-stride = <0x0 0x20000>;
|
|
reg = <0x17200000 0x10000>, /* GICD */
|
|
<0x17260000 0x100000>; /* GICR * 8 */
|
|
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
|
|
wdog: qcom,wdt@17410000 {
|
|
compatible = "qcom,msm-watchdog";
|
|
reg = <0x17410000 0x1000>;
|
|
reg-names = "wdt-base";
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
qcom,bark-time = <11000>;
|
|
qcom,pet-time = <9360>;
|
|
qcom,ipi-ping;
|
|
qcom,wakeup-enable;
|
|
};
|
|
|
|
arch_timer: timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
apps_rsc: rsc@17a00000 {
|
|
label = "apps_rsc";
|
|
compatible = "qcom,rpmh-rsc";
|
|
reg = <0x17a00000 0x10000>,
|
|
<0x17a10000 0x10000>,
|
|
<0x17a20000 0x10000>;
|
|
reg-names = "drv-0", "drv-1", "drv-2";
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
qcom,drv-count = <3>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
|
|
apps_rsc_drv2: drv@2 {
|
|
qcom,drv-id = <2>;
|
|
qcom,tcs-offset = <0xd00>;
|
|
channel@0 {
|
|
qcom,tcs-config = <ACTIVE_TCS 2>,
|
|
<SLEEP_TCS 3>,
|
|
<WAKE_TCS 3>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
|
|
rpmhcc: qcom,rpmhclk {
|
|
compatible = "qcom,sm4450-rpmh-clk";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
apps_bcm_voter: bcm_voter {
|
|
compatible = "qcom,bcm-voter";
|
|
};
|
|
};
|
|
};
|
|
|
|
bluetooth: bt_wcn3990 {
|
|
compatible = "qcom,wcn3990";
|
|
qcom,bt-sw-ctrl-gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>;
|
|
qcom,bt-vdd-io-supply = <&L21B>; /* IO */
|
|
qcom,bt-vdd-core-supply = <&L14B>; /* RFA */
|
|
qcom,bt-vdd-pa-supply = <&L7E>; /* CH0 */
|
|
qcom,bt-vdd-xtal-supply = <&L23B>; /* XO */
|
|
|
|
qcom,bt-vdd-io-config = <1700000 1900000 1 0>;
|
|
qcom,bt-vdd-core-config = <1304000 1304000 1 0>;
|
|
qcom,bt-vdd-pa-config = <3000000 3312000 1 0>;
|
|
qcom,bt-vdd-xtal-config = <1700000 1900000 1 0>;
|
|
};
|
|
|
|
disp_rsc: rsc@af20000 {
|
|
lable = "disp_rsc";
|
|
compatible = "qcom,rpmh-rsc";
|
|
reg = <0xaf20000 0x10000>;
|
|
reg-names = "drv-0";
|
|
interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&dispcc DISP_CC_MDSS_RSCC_AHB_CLK>;
|
|
qcom,drv-count = <1>;
|
|
|
|
disp_rsc_drv0: drv@0 {
|
|
qcom,tcs-offset = <0x1c00>;
|
|
qcom,drv-id = <0>;
|
|
channel@0 {
|
|
qcom,tcs-config = <ACTIVE_TCS 0>,
|
|
<SLEEP_TCS 1>,
|
|
<WAKE_TCS 1>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
|
|
disp_bcm_voter: bcm_voter {
|
|
compatible = "qcom,bcm-voter";
|
|
qcom,tcs-wait = <QCOM_ICC_TAG_AMC>;
|
|
qcom,no-amc;
|
|
};
|
|
};
|
|
};
|
|
|
|
pdc: interrupt-controller@b220000 {
|
|
compatible = "qcom,ravelin-pdc", "qcom,pdc";
|
|
reg = <0xb220000 0x30000>, <0x174000f0 0x64>;
|
|
reg-names = "pdc-interrupt-base", "apps-shared-spi-cfg";
|
|
qcom,pdc-ranges = <0 480 94>, <94 609 31>, <125 63 1>,
|
|
<126 716 12>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-parent = <&intc>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
|
|
CPU_PD0: cpu-pd0 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD1: cpu-pd1 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD2: cpu-pd2 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD3: cpu-pd3 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD4: cpu-pd4 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD5: cpu-pd5 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD6: cpu-pd6 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD7: cpu-pd7 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CLUSTER_PD: cluster-pd {
|
|
#power-domain-cells = <0>;
|
|
domain-idle-states = <&CLUSTER_OFF &CX_RET>;
|
|
};
|
|
};
|
|
|
|
slimbam: bamdma@3304000 {
|
|
compatible = "qcom,bam-v1.7.0";
|
|
qcom,controlled-remotely;
|
|
reg = <0x3304000 0x20000>, <0x326b000 0x1000>;
|
|
reg-names = "bam", "bam_remote_mem";
|
|
num-channels = <31>;
|
|
interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
qcom,ee = <1>;
|
|
qcom,num-ees = <2>;
|
|
};
|
|
|
|
slim_msm: slim@3340000 {
|
|
compatible = "qcom,slim-ngd-v1.5.0";
|
|
reg = <0x3340000 0x2C000>, <0x326a000 0x1000>;
|
|
reg-names = "ctrl", "slimbus_remote_mem";
|
|
interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
|
|
qcom,apps-ch-pipes = <0x0>;
|
|
qcom,ea-pc = <0x440>;
|
|
dmas = <&slimbam 3>, <&slimbam 4>;
|
|
dma-names = "rx", "tx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "ok";
|
|
};
|
|
|
|
cluster-device {
|
|
compatible = "qcom,lpm-cluster-dev";
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
cpuss-sleep-stats@17800054 {
|
|
compatible = "qcom,cpuss-sleep-stats";
|
|
reg = <0x17800054 0x4>, <0x17810054 0x4>, <0x17820054 0x4>,
|
|
<0x17830054 0x4>, <0x17840054 0x4>, <0x17850054 0x4>,
|
|
<0x17860054 0x4>, <0x17870054 0x4>, <0x17880098 0x4>,
|
|
<0x178C0000 0x10000>;
|
|
reg-names = "seq_lpm_cntr_cfg_cpu0", "seq_lpm_cntr_cfg_cpu1",
|
|
"seq_lpm_cntr_cfg_cpu2", "seq_lpm_cntr_cfg_cpu3",
|
|
"seq_lpm_cntr_cfg_cpu4", "seq_lpm_cntr_cfg_cpu5",
|
|
"seq_lpm_cntr_cfg_cpu6", "seq_lpm_cntr_cfg_cpu7",
|
|
"l3_seq_lpm_cntr_cfg", "apss_seq_mem_base";
|
|
num-cpus = <8>;
|
|
};
|
|
|
|
sram@c3f0000 {
|
|
compatible = "qcom,rpmh-stats-v3";
|
|
reg = <0xc3f0000 0x400>;
|
|
ss-name = "modem", "adsp", "adsp_island",
|
|
"apss", "wpss";
|
|
qcom,qmp = <&aoss_qmp>;
|
|
};
|
|
|
|
sys-pm-vx@c320000 {
|
|
compatible = "qcom,sys-pm-violators", "qcom,sys-pm-ravelin";
|
|
reg = <0xc320000 0x0400>;
|
|
qcom,qmp = <&aoss_qmp>;
|
|
};
|
|
|
|
memtimer: timer@17420000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "arm,armv7-timer-mem";
|
|
reg = <0x17420000 0x1000>;
|
|
clock-frequency = <19200000>;
|
|
|
|
frame@17421000 {
|
|
frame-number = <0>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17421000 0x1000>,
|
|
<0x17422000 0x1000>;
|
|
};
|
|
|
|
frame@17423000 {
|
|
frame-number = <1>;
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17423000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17425000 {
|
|
frame-number = <2>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17425000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17427000 {
|
|
frame-number = <3>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17427000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17429000 {
|
|
frame-number = <4>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17429000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@1742b000 {
|
|
frame-number = <5>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x1742b000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@1742d000 {
|
|
frame-number = <6>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x1742d000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
cpucp: qcom,cpucp@17400000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
compatible = "qcom,cpucp";
|
|
reg = <0x17400000 0x10>,
|
|
<0x17d90000 0x2000>;
|
|
reg-names = "tx", "rx";
|
|
#mbox-cells = <1>;
|
|
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
scmi: qcom,scmi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "arm,scmi";
|
|
mboxes = <&cpucp 0>;
|
|
mbox-names = "tx";
|
|
shmem = <&cpu_scmi_lpri>;
|
|
|
|
scmi_pmu: protocol@86 {
|
|
reg = <0x86>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
scmi_plh: protocol@81 {
|
|
reg = <0x81>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
scmi_cpufreqstat: protocol@84 {
|
|
reg = <0x84>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
scmi_shared_rail: protocol@88 {
|
|
reg = <0x88>;
|
|
#clock-cells = <1>;
|
|
};
|
|
};
|
|
|
|
cpucp_log: qcom,cpucp_log@17d09c00 {
|
|
compatible = "qcom,cpucp-log";
|
|
reg = <0x17d09c00 0x200>, <0x17d09e00 0x200>;
|
|
mboxes = <&cpucp 1>;
|
|
};
|
|
|
|
qcom,secure-buffer {
|
|
compatible = "qcom,secure-buffer";
|
|
qcom,vmid-cp-camera-preview-ro;
|
|
};
|
|
|
|
qcom,mem-buf {
|
|
compatible = "qcom,mem-buf";
|
|
qcom,mem-buf-capabilities = "supplier";
|
|
qcom,vmid = <3>;
|
|
};
|
|
|
|
qcom,mem-buf-msgq {
|
|
compatible = "qcom,mem-buf-msgq";
|
|
};
|
|
|
|
qcom,rmtfs_sharedmem@0 {
|
|
compatible = "qcom,sharedmem-uio";
|
|
reg = <0x0 0x280000>;
|
|
reg-names = "rmtfs";
|
|
qcom,client-id = <0x00000001>;
|
|
};
|
|
|
|
qcom_tzlog: tz-log@146AA720 {
|
|
compatible = "qcom,tz-log";
|
|
reg = <0x146AA720 0x3000>;
|
|
qcom,hyplog-enabled;
|
|
hyplog-address-offset = <0x410>;
|
|
hyplog-size-offset = <0x414>;
|
|
tmecrashdump-address-offset = <0x808a0000>;
|
|
status = "ok";
|
|
};
|
|
|
|
qcom_qseecom: qseecom@c1700000 {
|
|
memory-region = <&qseecom_mem>;
|
|
qseecom_mem = <&qseecom_mem>;
|
|
qseecom_ta_mem = <&qseecom_ta_mem>;
|
|
user_contig_mem = <&user_contig_mem>;
|
|
qcom,hlos-num-ce-hw-instances = <1>;
|
|
qcom,hlos-ce-hw-instance = <0>;
|
|
qcom,qsee-ce-hw-instance = <0>;
|
|
qcom,disk-encrypt-pipe-pair = <2>;
|
|
qcom,no-clock-support;
|
|
qcom,appsbl-qseecom-support;
|
|
qcom,commonlib64-loaded-by-uefi;
|
|
qcom,qsee-reentrancy-support = <2>;
|
|
};
|
|
|
|
ipcc_mproc: qcom,ipcc@ed18000 {
|
|
compatible = "qcom,ipcc";
|
|
reg = <0xed18000 0x1000>;
|
|
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
#mbox-cells = <2>;
|
|
};
|
|
|
|
qcom,memshare {
|
|
compatible = "qcom,memshare";
|
|
|
|
qcom,client_1 {
|
|
compatible = "qcom,memshare-peripheral";
|
|
qcom,peripheral-size = <0x0>;
|
|
qcom,client-id = <0>;
|
|
qcom,allocate-boot-time;
|
|
label = "modem";
|
|
};
|
|
|
|
qcom,client_2 {
|
|
compatible = "qcom,memshare-peripheral";
|
|
qcom,peripheral-size = <0x0>;
|
|
qcom,client-id = <2>;
|
|
label = "modem";
|
|
};
|
|
|
|
mem_client_3_size: qcom,client_3 {
|
|
compatible = "qcom,memshare-peripheral";
|
|
qcom,peripheral-size = <0x500000>;
|
|
qcom,client-id = <1>;
|
|
qcom,allocate-on-request;
|
|
label = "modem";
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
xo_board: xo_board {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <76800000>;
|
|
clock-output-names = "xo_board";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
sleep_clk: sleep_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32000>;
|
|
clock-output-names = "sleep_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
pcie_0_pipe_clk: pcie_0_pipe_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000>;
|
|
clock-output-names = "pcie_0_pipe_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
ufs_phy_rx_symbol_0_clk: ufs_phy_rx_symbol_0_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000>;
|
|
clock-output-names = "ufs_phy_rx_symbol_0_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
ufs_phy_rx_symbol_1_clk: ufs_phy_rx_symbol_1_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000>;
|
|
clock-output-names = "ufs_phy_rx_symbol_1_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
ufs_phy_tx_symbol_0_clk: ufs_phy_tx_symbol_0_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000>;
|
|
clock-output-names = "ufs_phy_tx_symbol_0_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
usb3_phy_wrapper_gcc_usb30_pipe_clk: usb3_phy_wrapper_gcc_usb30_pipe_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000>;
|
|
clock-output-names = "usb3_phy_wrapper_gcc_usb30_pipe_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
camcc: clock-controller@ade0000 {
|
|
compatible = "qcom,sm4450-camcc", "syscon";
|
|
reg = <0xade0000 0x20000>;
|
|
reg-name = "cc_base";
|
|
vdd_cx-supply = <&VDD_CX_LEVEL>;
|
|
vdd_mx-supply = <&VDD_MX_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&gcc GCC_CAMERA_AHB_CLK>;
|
|
clock-names = "bi_tcxo", "iface";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
dispcc: clock-controller@af00000 {
|
|
compatible = "qcom,sm4450-dispcc", "syscon";
|
|
reg = <0xaf00000 0x20000>;
|
|
reg-name = "cc_base";
|
|
vdd_cx-supply = <&VDD_CX_LEVEL>;
|
|
vdd_mx-supply = <&VDD_MX_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&rpmhcc RPMH_CXO_CLK_A>,
|
|
<&sleep_clk>,
|
|
<&gcc GCC_DISP_AHB_CLK>;
|
|
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "iface";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
gcc: clock-controller@100000 {
|
|
compatible = "qcom,sm4450-gcc", "syscon";
|
|
reg = <0x100000 0x1f4200>;
|
|
reg-name = "cc_base";
|
|
vdd_cx-supply = <&VDD_CX_LEVEL>;
|
|
vdd_mx-supply = <&VDD_MX_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>,
|
|
<&pcie_0_pipe_clk>, <&ufs_phy_rx_symbol_0_clk>,
|
|
<&ufs_phy_rx_symbol_1_clk>, <&ufs_phy_tx_symbol_0_clk>,
|
|
<&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
|
|
clock-names = "bi_tcxo", "sleep_clk",
|
|
"pcie_0_pipe_clk", "ufs_phy_rx_symbol_0_clk",
|
|
"ufs_phy_rx_symbol_1_clk", "ufs_phy_tx_symbol_0_clk",
|
|
"usb3_phy_wrapper_gcc_usb30_pipe_clk";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
gpucc: clock-controller@3d90000 {
|
|
compatible = "qcom,sm4450-gpucc", "syscon";
|
|
reg = <0x3d90000 0xa000>;
|
|
reg-name = "cc_base";
|
|
vdd_cx-supply = <&VDD_CX_LEVEL>;
|
|
vdd_mx-supply = <&VDD_MX_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&gcc GCC_GPU_GPLL0_CLK_SRC>,
|
|
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>,
|
|
<&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
|
|
clock-names = "bi_tcxo", "gpll0_out_main",
|
|
"gpll0_out_main_div", "gcc_gpu_snoc_dvm_gfx_clk";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
apsscc: syscon@17aa0000 {
|
|
compatible = "syscon";
|
|
reg = <0x17aa0000 0x1c>;
|
|
};
|
|
|
|
mccc: syscon@190ba000 {
|
|
compatible = "syscon";
|
|
reg = <0x190ba000 0x54>;
|
|
};
|
|
|
|
debugcc: debug-clock-controller@0 {
|
|
compatible = "qcom,sm4450-debugcc";
|
|
qcom,gcc = <&gcc>;
|
|
qcom,dispcc = <&dispcc>;
|
|
qcom,camcc = <&camcc>;
|
|
qcom,gpucc = <&gpucc>;
|
|
qcom,apsscc = <&apsscc>;
|
|
qcom,mccc = <&mccc>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&gcc 0>,
|
|
<&camcc 0>,
|
|
<&dispcc 0>,
|
|
<&gpucc 0>;
|
|
clock-names = "xo_clk_src",
|
|
"gcc",
|
|
"camcc",
|
|
"dispcc",
|
|
"gpucc";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
cpufreq_hw: qcom,cpufreq-hw {
|
|
compatible = "qcom,cpufreq-epss";
|
|
reg = <0x17d91000 0x1000>, <0x17d92000 0x1000>;
|
|
reg-names = "freq-domain0", "freq-domain1";
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
|
|
clock-names = "xo", "alternate";
|
|
qcom,lut-row-size = <4>;
|
|
qcom,skip-enable-check;
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "dcvsh0_int", "dcvsh1_int";
|
|
#freq-domain-cells = <2>;
|
|
};
|
|
|
|
qcom,cpufreq-hw-debug {
|
|
qcom,freq-hw-domain = <&cpufreq_hw 0>, <&cpufreq_hw 1>;
|
|
};
|
|
|
|
tcsr: syscon@1fc0000 {
|
|
compatible = "syscon";
|
|
reg = <0x1fc0000 0x30000>;
|
|
};
|
|
|
|
tcsr_mutex_block: syscon@1f40000 {
|
|
compatible = "syscon";
|
|
reg = <0x1f40000 0x20000>;
|
|
};
|
|
|
|
tcsr_mutex: hwlock {
|
|
compatible = "qcom,tcsr-mutex";
|
|
syscon = <&tcsr_mutex_block 0 0x1000>;
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
smem: qcom,smem {
|
|
compatible = "qcom,smem";
|
|
memory-region = <&smem_mem>;
|
|
hwlocks = <&tcsr_mutex 3>;
|
|
};
|
|
|
|
qcom,smp2p-modem {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <435>, <428>;
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <1>;
|
|
|
|
modem_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
modem_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
};
|
|
|
|
qcom,smp2p-adsp {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <443>, <429>;
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_SMP2P
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_LPASS
|
|
IPCC_MPROC_SIGNAL_SMP2P>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <2>;
|
|
|
|
adsp_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
adsp_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
sleepstate_smp2p_out: sleepstate-out {
|
|
qcom,entry-name = "sleepstate";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
sleepstate_smp2p_in: qcom,sleepstate-in {
|
|
qcom,entry-name = "sleepstate_see";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
smp2p_rdbg2_out: qcom,smp2p-rdbg2-out {
|
|
qcom,entry-name = "rdbg";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
smp2p_rdbg2_in: qcom,smp2p-rdbg2-in {
|
|
qcom,entry-name = "rdbg";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
qcom,smp2p_sleepstate {
|
|
compatible = "qcom,smp2p-sleepstate";
|
|
qcom,smem-states = <&sleepstate_smp2p_out 0>;
|
|
interrupt-parent = <&sleepstate_smp2p_in>;
|
|
interrupts = <0 0>;
|
|
interrupt-names = "smp2p-sleepstate-in";
|
|
};
|
|
|
|
qcom,smp2p-wpss {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <617>, <616>;
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_WPSS IPCC_MPROC_SIGNAL_SMP2P
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_WPSS IPCC_MPROC_SIGNAL_SMP2P>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <13>;
|
|
|
|
wpss_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
wpss_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
smp2p_wlan_1_in: qcom,smp2p-wlan-1-in {
|
|
qcom,entry-name = "wlan";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
smp2p_wlan_1_out: qcom,smp2p-wlan-1-out {
|
|
qcom,entry-name = "wlan";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
};
|
|
|
|
qcom,glinkpkt {
|
|
compatible = "qcom,glinkpkt";
|
|
|
|
qcom,glinkpkt-at-mdm0 {
|
|
qcom,glinkpkt-edge = "mpss";
|
|
qcom,glinkpkt-ch-name = "DS";
|
|
qcom,glinkpkt-dev-name = "at_mdm0";
|
|
};
|
|
|
|
qcom,glinkpkt-data40-cntl {
|
|
qcom,glinkpkt-edge = "mpss";
|
|
qcom,glinkpkt-ch-name = "DATA40_CNTL";
|
|
qcom,glinkpkt-dev-name = "smdcntl8";
|
|
};
|
|
|
|
qcom,glinkpkt-data1 {
|
|
qcom,glinkpkt-edge = "mpss";
|
|
qcom,glinkpkt-ch-name = "DATA1";
|
|
qcom,glinkpkt-dev-name = "smd7";
|
|
};
|
|
|
|
qcom,glinkpkt-data4 {
|
|
qcom,glinkpkt-edge = "mpss";
|
|
qcom,glinkpkt-ch-name = "DATA4";
|
|
qcom,glinkpkt-dev-name = "smd8";
|
|
};
|
|
|
|
qcom,glinkpkt-data11 {
|
|
qcom,glinkpkt-edge = "mpss";
|
|
qcom,glinkpkt-ch-name = "DATA11";
|
|
qcom,glinkpkt-dev-name = "smd11";
|
|
};
|
|
};
|
|
|
|
qcom,glink {
|
|
compatible = "qcom,glink";
|
|
};
|
|
|
|
aoss_qmp: power-controller@c300000 {
|
|
compatible = "qcom,aoss-qmp";
|
|
reg = <0xc300000 0x400>;
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_AOP
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_AOP
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP>;
|
|
|
|
#power-domain-cells = <1>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
qmp_aop: qcom,qmp-aop {
|
|
compatible = "qcom,qmp-mbox";
|
|
qcom,qmp = <&aoss_qmp>;
|
|
label = "aop";
|
|
#mbox-cells = <1>;
|
|
};
|
|
|
|
qmp_tme: qcom,qmp-tme {
|
|
compatible = "qcom,qmp-mbox";
|
|
qcom,remote-pid = <14>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_TME
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP>;
|
|
mbox-names = "tme_qmp";
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_TME
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
|
|
label = "tme";
|
|
qcom,early-boot;
|
|
priority = <0>;
|
|
mbox-desc-offset = <0x0>;
|
|
#mbox-cells = <1>;
|
|
};
|
|
|
|
qcom,tmecom-qmp-client {
|
|
compatible = "qcom,tmecom-qmp-client";
|
|
mboxes = <&qmp_tme 0>;
|
|
mbox-names = "tmecom";
|
|
label = "tmecom";
|
|
depends-on-supply = <&qmp_tme>;
|
|
};
|
|
|
|
qcom_cedev: qcedev@1de0000 {
|
|
compatible = "qcom,qcedev";
|
|
reg = <0x1de0000 0x20000>,
|
|
<0x1dc4000 0x24000>;
|
|
reg-names = "crypto-base","crypto-bam-base";
|
|
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
|
|
qcom,bam-pipe-pair = <2>;
|
|
qcom,ce-hw-instance = <0>;
|
|
qcom,ce-device = <0>;
|
|
qcom,ce-hw-shared;
|
|
qcom,bam-ee = <0>;
|
|
qcom,smmu-s1-enable;
|
|
qcom,no-clock-support;
|
|
interconnect-names = "data_path";
|
|
interconnects = <&aggre2_noc MASTER_CRYPTO &mc_virt SLAVE_EBI1>;
|
|
iommus = <&apps_smmu 0x0480 0x0>,
|
|
<&apps_smmu 0x0481 0x0>;
|
|
qcom,iommu-dma = "atomic";
|
|
dma-coherent;
|
|
|
|
qcom_cedev_ns_cb {
|
|
compatible = "qcom,qcedev,context-bank";
|
|
label = "ns_context";
|
|
iommus = <&apps_smmu 0x0481 0x0>;
|
|
dma-coherent;
|
|
};
|
|
|
|
qcom_cedev_s_cb {
|
|
compatible = "qcom,qcedev,context-bank";
|
|
label = "secure_context";
|
|
iommus = <&apps_smmu 0x0483 0x0>;
|
|
qcom,iommu-vmid = <0x9>;
|
|
qcom,secure-context-bank;
|
|
dma-coherent;
|
|
};
|
|
};
|
|
|
|
ufsphy_mem: ufsphy_mem@1d87000 {
|
|
reg = <0x1d87000 0xe10>;
|
|
reg-names = "phy_mem";
|
|
#phy-cells = <0>;
|
|
|
|
lanes-per-direction = <2>;
|
|
clock-names = "ref_clk_src",
|
|
"ref_aux_clk", "qref_clk",
|
|
"rx_sym0_mux_clk", "rx_sym1_mux_clk", "tx_sym0_mux_clk",
|
|
"rx_sym0_phy_clk", "rx_sym1_phy_clk", "tx_sym0_phy_clk";
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
|
|
<&gcc GCC_UFS_0_CLKREF_EN>,
|
|
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK_SRC>,
|
|
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK_SRC>,
|
|
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK_SRC>,
|
|
<&ufs_phy_rx_symbol_0_clk>,
|
|
<&ufs_phy_rx_symbol_1_clk>,
|
|
<&ufs_phy_tx_symbol_0_clk>;
|
|
resets = <&ufshc_mem 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ufshc_mem: ufshc@1d84000 {
|
|
compatible = "qcom,ufshc";
|
|
reg = <0x1d84000 0x3000>,
|
|
<0x1d88000 0x8000>,
|
|
<0x1d90000 0x9000>;
|
|
reg-names = "ufs_mem", "ufs_ice", "ufs_ice_hwkm";
|
|
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&ufsphy_mem>;
|
|
phy-names = "ufsphy";
|
|
#reset-cells = <1>;
|
|
|
|
lanes-per-direction = <2>;
|
|
dev-ref-clk-freq = <0>; /* 19.2 MHz */
|
|
clock-names =
|
|
"core_clk",
|
|
"bus_aggr_clk",
|
|
"iface_clk",
|
|
"core_clk_unipro",
|
|
"core_clk_ice",
|
|
"ref_clk",
|
|
"tx_lane0_sync_clk",
|
|
"rx_lane0_sync_clk",
|
|
"rx_lane1_sync_clk";
|
|
clocks =
|
|
<&gcc GCC_UFS_PHY_AXI_CLK>,
|
|
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
|
|
<&gcc GCC_UFS_PHY_AHB_CLK>,
|
|
<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
|
|
<&gcc GCC_UFS_PHY_ICE_CORE_CLK>,
|
|
<&rpmhcc RPMH_CXO_CLK>,
|
|
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
|
|
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
|
|
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
|
|
freq-table-hz =
|
|
<75000000 300000000>,
|
|
<0 0>,
|
|
<0 0>,
|
|
<75000000 300000000>,
|
|
<100000000 403000000>,
|
|
<0 0>,
|
|
<0 0>,
|
|
<0 0>,
|
|
<0 0>;
|
|
|
|
interconnects = <&aggre2_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>,
|
|
<&gem_noc MASTER_APPSS_PROC &cnoc2 SLAVE_UFS_MEM_CFG>;
|
|
interconnect-names = "ufs-ddr", "cpu-ufs";
|
|
|
|
qcom,ufs-bus-bw,name = "ufshc_mem";
|
|
qcom,ufs-bus-bw,num-cases = <26>;
|
|
qcom,ufs-bus-bw,num-paths = <2>;
|
|
qcom,ufs-bus-bw,vectors-KBps =
|
|
/*
|
|
* During HS G3 UFS runs at nominal voltage corner, vote
|
|
* higher bandwidth to push other buses in the data path
|
|
* to run at nominal to achieve max throughput.
|
|
* 4GBps pushes BIMC to run at nominal.
|
|
* 200MBps pushes CNOC to run at nominal.
|
|
* Vote for half of this bandwidth for HS G3 1-lane.
|
|
* For max bandwidth, vote high enough to push the buses
|
|
* to run in turbo voltage corner.
|
|
*/
|
|
<0 0>, <0 0>, /* No vote */
|
|
<922 0>, <1000 0>, /* PWM G1 */
|
|
<1844 0>, <1000 0>, /* PWM G2 */
|
|
<3688 0>, <1000 0>, /* PWM G3 */
|
|
<7376 0>, <1000 0>, /* PWM G4 */
|
|
<1844 0>, <1000 0>, /* PWM G1 L2 */
|
|
<3688 0>, <1000 0>, /* PWM G2 L2 */
|
|
<7376 0>, <1000 0>, /* PWM G3 L2 */
|
|
<14752 0>, <1000 0>, /* PWM G4 L2 */
|
|
<127796 0>, <1000 0>, /* HS G1 RA */
|
|
<255591 0>, <1000 0>, /* HS G2 RA */
|
|
<1492582 0>, <102400 0>, /* HS G3 RA */
|
|
<2915200 0>, <204800 0>, /* HS G4 RA */
|
|
<255591 0>, <1000 0>, /* HS G1 RA L2 */
|
|
<511181 0>, <1000 0>, /* HS G2 RA L2 */
|
|
<1492582 0>, <204800 0>, /* HS G3 RA L2 */
|
|
<2915200 0>, <409600 0>, /* HS G4 RA L2 */
|
|
<149422 0>, <1000 0>, /* HS G1 RB */
|
|
<298189 0>, <1000 0>, /* HS G2 RB */
|
|
<1492582 0>, <102400 0>, /* HS G3 RB */
|
|
<2915200 0>, <204800 0>, /* HS G4 RB */
|
|
<298189 0>, <1000 0>, /* HS G1 RB L2 */
|
|
<596378 0>, <1000 0>, /* HS G2 RB L2 */
|
|
/* As UFS working in HS G3 RB L2 mode, aggregated
|
|
* bandwidth (AB) should take care of providing
|
|
* optimum throughput requested. However, as tested,
|
|
* in order to scale up CNOC clock, instantaneous
|
|
* bindwidth (IB) needs to be given a proper value too.
|
|
*/
|
|
<1492582 0>, <204800 409600>, /* HS G3 RB L2 KBPs */
|
|
<2915200 0>, <409600 409600>, /* HS G4 RB L2 */
|
|
<7643136 0>, <307200 0>; /* Max. bandwidth */
|
|
|
|
qcom,bus-vector-names = "MIN",
|
|
"PWM_G1_L1", "PWM_G2_L1", "PWM_G3_L1", "PWM_G4_L1",
|
|
"PWM_G1_L2", "PWM_G2_L2", "PWM_G3_L2", "PWM_G4_L2",
|
|
"HS_RA_G1_L1", "HS_RA_G2_L1", "HS_RA_G3_L1", "HS_RA_G4_L1",
|
|
"HS_RA_G1_L2", "HS_RA_G2_L2", "HS_RA_G3_L2", "HS_RA_G4_L2",
|
|
"HS_RB_G1_L1", "HS_RB_G2_L1", "HS_RB_G3_L1", "HS_RB_G4_L1",
|
|
"HS_RB_G1_L2", "HS_RB_G2_L2", "HS_RB_G3_L2", "HS_RB_G4_L2",
|
|
"MAX";
|
|
|
|
reset-gpios = <&tlmm 136 GPIO_ACTIVE_LOW>;
|
|
resets = <&gcc GCC_UFS_PHY_BCR>;
|
|
reset-names = "rst";
|
|
|
|
iommus = <&apps_smmu 0x580 0x0>;
|
|
qcom,iommu-dma = "fastmap";
|
|
dma-coherent;
|
|
|
|
qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
|
|
qcom,iommu-geometry = <0x40000000 0x10000000>;
|
|
|
|
status = "disabled";
|
|
|
|
qos0 {
|
|
mask = <0xf0>;
|
|
vote = <44>;
|
|
perf;
|
|
};
|
|
|
|
qos1 {
|
|
mask = <0x0f>;
|
|
vote = <44>;
|
|
};
|
|
};
|
|
|
|
qcom_pmu: qcom,pmu {
|
|
compatible = "qcom,pmu";
|
|
reg = < 0x17D09300 0x300>;
|
|
reg-names = "pmu-base";
|
|
qcom,pmu-events-tbl =
|
|
< 0x0008 0xFF 0xFF 0x02 >,
|
|
< 0x0011 0xFF 0xFF 0x00 >,
|
|
< 0x0017 0xFF 0xFF 0xFF >,
|
|
< 0x002A 0xFF 0xFF 0xFF >;
|
|
};
|
|
|
|
ddr_freq_table: ddr-freq-table {
|
|
ddr4 {
|
|
qcom,ddr-type = <7>;
|
|
qcom,freq-tbl =
|
|
< 547000 >,
|
|
< 768000 >,
|
|
< 1017000 >,
|
|
< 1353600 >,
|
|
< 1555000 >,
|
|
< 1708000 >,
|
|
< 2092000 >;
|
|
};
|
|
|
|
ddr5 {
|
|
qcom,ddr-type = <8>;
|
|
qcom,freq-tbl =
|
|
< 547000 >,
|
|
< 768000 >,
|
|
< 1555000 >,
|
|
< 1708000 >,
|
|
< 2092000 >,
|
|
< 2736000 >,
|
|
< 3196000 >;
|
|
};
|
|
};
|
|
|
|
ddrqos_freq_table: ddrqos-freq-table {
|
|
qcom,freq-tbl =
|
|
< 0 >,
|
|
< 1 >;
|
|
};
|
|
|
|
qcom_dcvs: qcom,dcvs {
|
|
compatible = "qcom,dcvs";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
qcom_l3_dcvs_hw: l3 {
|
|
compatible = "qcom,dcvs-hw";
|
|
qcom,dcvs-hw-type = <2>;
|
|
qcom,bus-width = <32>;
|
|
reg = <0x17d90000 0x4000>, <0x17d90100 0xa0>;
|
|
reg-names = "l3-base", "l3tbl-base";
|
|
|
|
l3_dcvs_sp: sp {
|
|
compatible = "qcom,dcvs-path";
|
|
qcom,dcvs-path-type = <0>;
|
|
qcom,shared-offset = <0x0090>;
|
|
};
|
|
};
|
|
|
|
qcom_ddr_dcvs_hw: ddr {
|
|
compatible = "qcom,dcvs-hw";
|
|
qcom,dcvs-hw-type = <0>;
|
|
qcom,bus-width = <4>;
|
|
qcom,freq-tbl = <&ddr_freq_table>;
|
|
|
|
ddr_dcvs_sp: sp {
|
|
compatible = "qcom,dcvs-path";
|
|
qcom,dcvs-path-type = <0>;
|
|
interconnects = <&gem_noc MASTER_APPSS_PROC
|
|
&mc_virt SLAVE_EBI1>;
|
|
};
|
|
};
|
|
|
|
qcom_ddrqos_dcvs_hw: ddrqos {
|
|
compatible = "qcom,dcvs-hw";
|
|
qcom,dcvs-hw-type = <3>;
|
|
qcom,bus-width = <1>;
|
|
qcom,freq-tbl = <&ddrqos_freq_table>;
|
|
|
|
ddrqos_dcvs_sp: sp {
|
|
compatible = "qcom,dcvs-path";
|
|
qcom,dcvs-path-type = <0>;
|
|
interconnects = <&gem_noc MASTER_APPSS_PROC
|
|
&mc_virt SLAVE_EBI1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qcom_memlat: qcom,memlat {
|
|
compatible = "qcom,memlat";
|
|
|
|
ddr {
|
|
compatible = "qcom,memlat-grp";
|
|
qcom,target-dev = <&qcom_ddr_dcvs_hw>;
|
|
qcom,sampling-path = <&ddr_dcvs_sp>;
|
|
qcom,miss-ev = <0x2A>;
|
|
|
|
silver {
|
|
compatible = "qcom,memlat-mon";
|
|
qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5>;
|
|
qcom,sampling-enabled;
|
|
ddr4-tbl {
|
|
qcom,ddr-type = <7>;
|
|
qcom,cpufreq-memfreq-tbl =
|
|
< 1094400 547000 >,
|
|
< 1478400 768000 >,
|
|
< 1804800 1017000 >;
|
|
};
|
|
|
|
ddr5-tbl {
|
|
qcom,ddr-type = <8>;
|
|
qcom,cpufreq-memfreq-tbl =
|
|
< 1094400 547000 >,
|
|
< 1478400 768000 >,
|
|
< 1804800 1555000 >;
|
|
};
|
|
};
|
|
|
|
gold {
|
|
compatible = "qcom,memlat-mon";
|
|
qcom,cpulist = <&CPU6 &CPU7>;
|
|
qcom,sampling-enabled;
|
|
ddr4-tbl {
|
|
qcom,ddr-type = <7>;
|
|
qcom,cpufreq-memfreq-tbl =
|
|
< 960000 547000 >,
|
|
< 1190400 1017000 >,
|
|
< 1497600 1353600 >,
|
|
< 1651200 1555000 >,
|
|
< 2131200 1708000 >,
|
|
< 2400000 2092000 >;
|
|
};
|
|
|
|
ddr5-tbl {
|
|
qcom,ddr-type = <8>;
|
|
qcom,cpufreq-memfreq-tbl =
|
|
< 960000 547000 >,
|
|
< 1651200 1555000 >,
|
|
< 1900800 1708000 >,
|
|
< 2131200 2092000 >,
|
|
< 2400000 3196000 >;
|
|
};
|
|
};
|
|
|
|
silver-compute {
|
|
compatible = "qcom,memlat-mon";
|
|
qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5>;
|
|
qcom,sampling-enabled;
|
|
qcom,compute-mon;
|
|
ddr4-tbl {
|
|
qcom,ddr-type = <7>;
|
|
qcom,cpufreq-memfreq-tbl =
|
|
< 1478400 547000 >,
|
|
< 1804800 768000 >;
|
|
};
|
|
|
|
ddr5-tbl {
|
|
qcom,ddr-type = <8>;
|
|
qcom,cpufreq-memfreq-tbl =
|
|
< 1478400 547000 >,
|
|
< 1804800 768000 >;
|
|
};
|
|
};
|
|
|
|
gold-compute {
|
|
compatible = "qcom,memlat-mon";
|
|
qcom,cpulist = <&CPU6 &CPU7>;
|
|
qcom,sampling-enabled;
|
|
qcom,compute-mon;
|
|
ddr4-tbl {
|
|
qcom,ddr-type = <7>;
|
|
qcom,cpufreq-memfreq-tbl =
|
|
< 1190400 547000 >,
|
|
< 1497600 768000 >,
|
|
< 1651200 1017000 >,
|
|
< 1900800 1555000 >,
|
|
< 2131200 1708000 >,
|
|
< 2400000 2092000 >;
|
|
};
|
|
|
|
ddr5-tbl {
|
|
qcom,ddr-type = <8>;
|
|
qcom,cpufreq-memfreq-tbl =
|
|
< 1190400 547000 >,
|
|
< 1497600 768000 >,
|
|
< 1651200 1017000 >,
|
|
< 2054400 1555000 >,
|
|
< 2131200 1708000 >,
|
|
< 2400000 2092000 >;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
l3 {
|
|
compatible = "qcom,memlat-grp";
|
|
qcom,target-dev = <&qcom_l3_dcvs_hw>;
|
|
qcom,sampling-path = <&l3_dcvs_sp>;
|
|
qcom,miss-ev = <0x17>;
|
|
|
|
silver {
|
|
compatible = "qcom,memlat-mon";
|
|
qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5>;
|
|
qcom,cpufreq-memfreq-tbl =
|
|
< 499200 307200 >,
|
|
< 672000 556800 >,
|
|
< 806400 652800 >,
|
|
< 921600 825600 >,
|
|
< 1094400 940800 >,
|
|
< 1286400 1075200 >,
|
|
< 1478400 1209600 >,
|
|
< 1632000 1305600 >,
|
|
< 1804800 1440000 >;
|
|
qcom,sampling-enabled;
|
|
};
|
|
|
|
gold {
|
|
compatible = "qcom,memlat-mon";
|
|
qcom,cpulist = <&CPU6 &CPU7>;
|
|
qcom,cpufreq-memfreq-tbl =
|
|
< 691200 307200 >,
|
|
< 960000 556800 >,
|
|
< 1190400 825600 >,
|
|
< 1344000 940800 >,
|
|
< 1651200 1209600 >,
|
|
< 1900800 1305600 >,
|
|
< 2054400 1401600 >,
|
|
< 2208000 1440000 >;
|
|
qcom,sampling-enabled;
|
|
};
|
|
|
|
gold-compute {
|
|
compatible = "qcom,memlat-mon";
|
|
qcom,cpulist = <&CPU6 &CPU7>;
|
|
qcom,cpufreq-memfreq-tbl =
|
|
< 2054400 307200 >,
|
|
< 2361600 1401600 >;
|
|
qcom,sampling-enabled;
|
|
qcom,compute-mon;
|
|
};
|
|
|
|
};
|
|
|
|
ddrqos {
|
|
compatible = "qcom,memlat-grp";
|
|
qcom,target-dev = <&qcom_ddrqos_dcvs_hw>;
|
|
qcom,sampling-path = <&ddrqos_dcvs_sp>;
|
|
qcom,miss-ev = <0x2A>;
|
|
|
|
ddrqos_gold_lat: gold {
|
|
compatible = "qcom,memlat-mon";
|
|
qcom,cpulist = <&CPU6 &CPU7>;
|
|
qcom,cpufreq-memfreq-tbl =
|
|
< 2300000 0 >,
|
|
< 3000000 1 >;
|
|
qcom,sampling-enabled;
|
|
};
|
|
|
|
};
|
|
};
|
|
|
|
bwmon_ddr: qcom,bwmon-ddr@19091000 {
|
|
compatible = "qcom,bwmon5";
|
|
reg = <0x19091000 0x1000>;
|
|
reg-names = "base";
|
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
qcom,hw-timer-hz = <19200000>;
|
|
qcom,count-unit = <0x10000>;
|
|
qcom,target-dev = <&qcom_ddr_dcvs_hw>;
|
|
};
|
|
|
|
sdhc1_opp_table: sdhc1-opp-table {
|
|
compatible = "operating-points-v2";
|
|
|
|
opp-100000000 {
|
|
opp-hz = /bits/ 64 <100000000>;
|
|
opp-peak-kBps = <1600000 280000>;
|
|
opp-avg-kBps = <104000 0>;
|
|
};
|
|
|
|
opp-384000000 {
|
|
opp-hz = /bits/ 64 <384000000>;
|
|
opp-peak-kBps = <5600000 1500000>;
|
|
opp-avg-kBps = <400000 0>;
|
|
};
|
|
};
|
|
|
|
sdhc_1: sdhci@7C4000 {
|
|
status = "disabled";
|
|
|
|
compatible = "qcom,sdhci-msm-v5";
|
|
reg = <0x007C4000 0x1000>, <0x007C5000 0x1000>,
|
|
<0x007C8000 0x8000>, <0x007D0000 0x9000>;
|
|
reg-names = "hc", "cqhci", "cqhci_ice", "cqhci_ice_hwkm";
|
|
iommus = <&apps_smmu 0x560 0x0>;
|
|
qcom,iommu-dma = "fastmap";
|
|
|
|
qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
|
|
qcom,iommu-geometry = <0x40000000 0x10000000>;
|
|
|
|
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
|
|
bus-width = <8>;
|
|
non-removable;
|
|
supports-cqe;
|
|
|
|
no-sd;
|
|
no-sdio;
|
|
|
|
mmc-ddr-1_8v;
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
|
|
qcom,devfreq,freq-table = <50000000 200000000>;
|
|
qcom,scaling-lower-bus-speed-mode = "DDR52";
|
|
|
|
cap-mmc-hw-reset;
|
|
|
|
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
|
|
<&gcc GCC_SDCC1_APPS_CLK>,
|
|
<&gcc GCC_SDCC1_ICE_CORE_CLK>;
|
|
clock-names = "iface", "core", "ice_core";
|
|
|
|
qcom,ice-clk-rates = <300000000 100000000>;
|
|
|
|
interconnects = <&aggre2_noc MASTER_SDCC_1 &mc_virt SLAVE_EBI1>,
|
|
<&gem_noc MASTER_APPSS_PROC &cnoc2 SLAVE_SDC1>;
|
|
interconnect-names = "sdhc-ddr","cpu-sdhc";
|
|
operating-points-v2 = <&sdhc1_opp_table>;
|
|
|
|
/* DLL HSR settings. Refer go/hsr - <Target> DLL settings */
|
|
qcom,dll-hsr-list = <0x000F642C 0x0 0x01
|
|
0x2C010800 0x80040868>;
|
|
|
|
/* Add dt entry for gcc hw reset */
|
|
resets = <&gcc GCC_SDCC1_BCR>;
|
|
reset-names = "core_reset";
|
|
|
|
qos0 {
|
|
mask = <0x03>;
|
|
vote = <44>;
|
|
};
|
|
|
|
qos1 {
|
|
mask = <0x3f>;
|
|
vote = <44>;
|
|
};
|
|
};
|
|
|
|
sdhc2_opp_table: sdhc2-opp-table {
|
|
compatible = "operating-points-v2";
|
|
|
|
opp-100000000 {
|
|
opp-hz = /bits/ 64 <100000000>;
|
|
opp-peak-kBps = <1600000 280000>;
|
|
opp-avg-kBps = <50000 0>;
|
|
};
|
|
|
|
opp-202000000 {
|
|
opp-hz = /bits/ 64 <202000000>;
|
|
opp-peak-kBps = <5600000 1500000>;
|
|
opp-avg-kBps = <104000 0>;
|
|
};
|
|
};
|
|
|
|
sdhc_2: sdhci@8804000 {
|
|
status = "disabled";
|
|
|
|
compatible = "qcom,sdhci-msm-v5";
|
|
reg = <0x08804000 0x1000>;
|
|
reg-names = "hc";
|
|
|
|
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
|
|
bus-width = <4>;
|
|
no-sdio;
|
|
no-mmc;
|
|
qcom,restore-after-cx-collapse;
|
|
|
|
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
|
|
<&gcc GCC_SDCC2_APPS_CLK>;
|
|
clock-names = "iface", "core";
|
|
|
|
/* DLL HSR settings. Refer go/hsr - <Target> DLL settings */
|
|
qcom,dll-hsr-list = <0x0007642C 0x0 0x10
|
|
0x2C010800 0x80040868>;
|
|
|
|
iommus = <&apps_smmu 0x140 0x0>;
|
|
qcom,iommu-dma = "fastmap";
|
|
|
|
qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
|
|
qcom,iommu-geometry = <0x40000000 0x10000000>;
|
|
|
|
interconnects = <&aggre1_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
|
|
<&gem_noc MASTER_APPSS_PROC &cnoc2 SLAVE_SDCC_2>;
|
|
interconnect-names = "sdhc-ddr","cpu-sdhc";
|
|
operating-points-v2 = <&sdhc2_opp_table>;
|
|
|
|
qos0 {
|
|
mask = <0x03>;
|
|
vote = <44>;
|
|
};
|
|
|
|
qos1 {
|
|
mask = <0x3f>;
|
|
vote = <44>;
|
|
};
|
|
};
|
|
|
|
cpu_pmu: cpu-pmu {
|
|
compatible = "arm,armv8-pmuv3";
|
|
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
|
|
msm_gpu: qcom,kgsl-3d0@3d00000 { };
|
|
|
|
qcom,msm-imem@146aa000 {
|
|
compatible = "qcom,msm-imem";
|
|
ranges = <0x0 0x146aa000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
mem_dump_table@10 {
|
|
compatible = "qcom,msm-imem-mem_dump_table";
|
|
reg = <0x10 0x8>;
|
|
};
|
|
|
|
restart_reason@65c {
|
|
compatible = "qcom,msm-imem-restart_reason";
|
|
reg = <0x65c 0x4>;
|
|
};
|
|
|
|
dload_type@1c {
|
|
compatible = "qcom,msm-imem-dload-type";
|
|
reg = <0x1c 0x4>;
|
|
};
|
|
|
|
boot_stats@6b0 {
|
|
compatible = "qcom,msm-imem-boot_stats";
|
|
reg = <0x6b0 0x20>;
|
|
};
|
|
|
|
kaslr_offset@6d0 {
|
|
compatible = "qcom,msm-imem-kaslr_offset";
|
|
reg = <0x6d0 0xc>;
|
|
};
|
|
|
|
pil@94c {
|
|
compatible = "qcom,pil-reloc-info";
|
|
reg = <0x94c 0xc8>;
|
|
};
|
|
|
|
pil@6dc {
|
|
compatible = "qcom,msm-imem-pil-disable-timeout";
|
|
reg = <0x6dc 0x4>;
|
|
};
|
|
|
|
diag_dload@c8 {
|
|
compatible = "qcom,msm-imem-diag-dload";
|
|
reg = <0xc8 0xc8>;
|
|
};
|
|
};
|
|
|
|
qcom,mpm2-sleep-counter@c221000 {
|
|
compatible = "qcom,mpm2-sleep-counter";
|
|
reg = <0xc221000 0x1000>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
qcom_ramoops {
|
|
compatible = "qcom,ramoops";
|
|
memory-region = <&ramoops_mem>;
|
|
pmsg-size = <0x200000>;
|
|
mem-type = <2>;
|
|
};
|
|
|
|
logbuf: qcom,logbuf-vendor-hooks {
|
|
compatible = "qcom,logbuf-vendor-hooks";
|
|
};
|
|
|
|
google,debug-kinfo {
|
|
compatible = "google,debug-kinfo";
|
|
memory-region = <&kinfo_mem>;
|
|
};
|
|
|
|
mini_dump_node {
|
|
compatible = "qcom,minidump";
|
|
status = "ok";
|
|
};
|
|
|
|
va_mini_dump {
|
|
compatible = "qcom,va-minidump";
|
|
memory-region = <&va_md_mem>;
|
|
status = "ok";
|
|
};
|
|
|
|
qcom,msm-adsprpc-mem {
|
|
compatible = "qcom,msm-adsprpc-mem-region";
|
|
memory-region = <&adsp_mem_heap>;
|
|
restrict-access;
|
|
};
|
|
|
|
qcom,sps {
|
|
compatible = "qcom,msm-sps-4k";
|
|
qcom,pipe-attr-ee;
|
|
};
|
|
|
|
msm_fastrpc: qcom,msm_fastrpc {
|
|
compatible = "qcom,msm-fastrpc-compute";
|
|
qcom,adsp-remoteheap-vmid = <22 37>;
|
|
qcom,fastrpc-adsp-audio-pdr;
|
|
qcom,fastrpc-adsp-sensors-pdr;
|
|
qcom,rpc-latency-us = <235>;
|
|
qcom,fastrpc-gids = <2908>;
|
|
qcom,qos-cores = <0 1 2 3 4 5>;
|
|
|
|
qcom,msm_fastrpc_compute_cb1 {
|
|
compatible = "qcom,msm-fastrpc-compute-cb";
|
|
label = "adsprpc-smd";
|
|
iommus = <&apps_smmu 0x1003 0x0>;
|
|
qcom,iommu-dma-addr-pool = <0x80000000 0x78000000>;
|
|
qcom,iommu-faults = "stall-disable", "HUPCF";
|
|
dma-coherent;
|
|
};
|
|
|
|
qcom,msm_fastrpc_compute_cb2 {
|
|
compatible = "qcom,msm-fastrpc-compute-cb";
|
|
label = "adsprpc-smd";
|
|
iommus = <&apps_smmu 0x1004 0x0>;
|
|
qcom,iommu-dma-addr-pool = <0x80000000 0x78000000>;
|
|
qcom,iommu-faults = "stall-disable", "HUPCF";
|
|
dma-coherent;
|
|
};
|
|
|
|
qcom,msm_fastrpc_compute_cb3 {
|
|
compatible = "qcom,msm-fastrpc-compute-cb";
|
|
label = "adsprpc-smd";
|
|
iommus = <&apps_smmu 0x1005 0x0>;
|
|
qcom,iommu-dma-addr-pool = <0x80000000 0x78000000>;
|
|
qcom,iommu-faults = "stall-disable", "HUPCF";
|
|
dma-coherent;
|
|
shared-cb = <4>;
|
|
};
|
|
};
|
|
|
|
clk_virt: interconnect@0 {
|
|
compatible = "qcom,ravelin-clk_virt";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
mc_virt: interconnect@1 {
|
|
compatible = "qcom,ravelin-mc_virt";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos", "disp";
|
|
qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>;
|
|
};
|
|
|
|
aggre1_noc: interconnect@16e0000 {
|
|
reg = <0x16E0000 0x13080>;
|
|
compatible = "qcom,ravelin-aggre1_noc";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
clocks = <&gcc GCC_SDCC2_AHB_CLK>;
|
|
};
|
|
|
|
aggre2_noc: interconnect@1700000 {
|
|
reg = <0x1700000 0x1B080>;
|
|
compatible = "qcom,ravelin-aggre2_noc";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
clocks = <&rpmhcc RPMH_IPA_CLK>,
|
|
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
|
|
};
|
|
|
|
cnoc2: interconnect@1500000 {
|
|
reg = <0x1500000 0x6200>;
|
|
compatible = "qcom,ravelin-cnoc2";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
cnoc3: interconnect@1510000 {
|
|
reg = <0x01510000 0xF200>;
|
|
compatible = "qcom,ravelin-cnoc3";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
gem_noc: interconnect@19100000 {
|
|
reg = <0x19100000 0xBC080>;
|
|
compatible = "qcom,ravelin-gem_noc";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos", "disp";
|
|
qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>;
|
|
};
|
|
|
|
lpass_ag_noc: interconnect@3C40000 {
|
|
reg = <0x3C40000 0x17200>;
|
|
compatible = "qcom,ravelin-lpass_ag_noc";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
mmss_noc: interconnect@1740000 {
|
|
reg = <0x1740000 0x19080>;
|
|
compatible = "qcom,ravelin-mmss_noc";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos", "disp";
|
|
qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>;
|
|
};
|
|
|
|
pcie_anoc: interconnect@16C0000 {
|
|
reg = <0x16C0000 0x7080>;
|
|
compatible = "qcom,ravelin-pcie_anoc";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
|
|
<&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
|
|
};
|
|
|
|
system_noc: interconnect@1680000 {
|
|
reg = <0x1680000 0x19080>;
|
|
compatible = "qcom,ravelin-system_noc";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
video_aggre_noc: interconnect@1760000 {
|
|
reg = <0x1760000 0x1100>;
|
|
compatible = "qcom,ravelin-video_aggre_noc";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
qfprom: qfprom@221c8000 {
|
|
compatible = "qcom,ravelin-qfprom", "qcom,qfprom";
|
|
reg = <0x221c8000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
read-only;
|
|
ranges;
|
|
|
|
feat_conf12: feat_conf12@0130 {
|
|
reg = <0x0130 0x4>;
|
|
};
|
|
|
|
feat_conf13: feat_conf13@0134 {
|
|
reg = <0x0134 0x4>;
|
|
};
|
|
|
|
boot_config: boot_config@600 {
|
|
reg = <0x600 0x1>;
|
|
};
|
|
|
|
gpu_speed_bin: gpu_speed_bin@119 {
|
|
reg = <0x119 0x2>;
|
|
bits = <5 8>;
|
|
};
|
|
};
|
|
|
|
qfprom_sys: qfprom@0 {
|
|
compatible = "qcom,qfprom-sys";
|
|
nvmem-cells = <&feat_conf12>,
|
|
<&feat_conf13>,
|
|
<&boot_config>,
|
|
<&gpu_speed_bin>;
|
|
nvmem-cell-names = "feat_conf12",
|
|
"feat_conf13",
|
|
"boot_config",
|
|
"gpu_speed_bin";
|
|
};
|
|
|
|
adsp_pas: remoteproc-adsp@03000000 {
|
|
compatible = "qcom,ravelin-adsp-pas";
|
|
reg = <0x03000000 0x10000>;
|
|
status = "ok";
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
clock-names = "xo";
|
|
|
|
cx-supply = <&VDD_LPI_CX_LEVEL>;
|
|
cx-uV-uA = <RPMH_REGULATOR_LEVEL_TURBO 0>;
|
|
mx-supply = <&VDD_LPI_MX_LEVEL>;
|
|
mx-uV-uA = <RPMH_REGULATOR_LEVEL_TURBO 0>;
|
|
reg-names = "cx", "mx";
|
|
|
|
interconnects = <&aggre2_noc MASTER_CRYPTO &mc_virt SLAVE_EBI1>;
|
|
interconnect-names = "crypto_ddr";
|
|
|
|
qcom,qmp = <&aoss_qmp>;
|
|
memory-region = <&adsp_mem>;
|
|
|
|
interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 0 0>,
|
|
<&adsp_smp2p_in 2 0>,
|
|
<&adsp_smp2p_in 1 0>,
|
|
<&adsp_smp2p_in 3 0>,
|
|
<&adsp_smp2p_in 7 0>;
|
|
|
|
interrupt-names = "wdog",
|
|
"fatal",
|
|
"handover",
|
|
"ready",
|
|
"stop-ack",
|
|
"shutdown-ack";
|
|
|
|
qcom,smem-states = <&adsp_smp2p_out 0>;
|
|
qcom,smem-state-names = "stop";
|
|
|
|
glink_edge: glink-edge {
|
|
qcom,remote-pid = <2>;
|
|
transport = "smem";
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_LPASS
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP>;
|
|
mbox-names = "adsp_smem";
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_LPASS
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
|
|
label = "adsp";
|
|
qcom,glink-label = "lpass";
|
|
|
|
qcom,adsp_qrtr {
|
|
qcom,glink-channels = "IPCRTR";
|
|
qcom,intents = <0x800 5
|
|
0x2000 3
|
|
0x4400 2>;
|
|
|
|
qcom,no-wake-svc = <0x190>;
|
|
};
|
|
|
|
qcom,msm_fastrpc_rpmsg {
|
|
compatible = "qcom,msm-fastrpc-rpmsg";
|
|
qcom,glink-channels = "fastrpcglink-apps-dsp";
|
|
qcom,intents = <0x64 64>;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
modem_pas: remoteproc-mss@04080000 {
|
|
compatible = "qcom,ravelin-modem-pas";
|
|
reg = <0x4080000 0x10000>;
|
|
status = "ok";
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
clock-names = "xo";
|
|
|
|
cx-supply = <&VDD_CX_LEVEL>;
|
|
cx-uV-uA = <RPMH_REGULATOR_LEVEL_TURBO 100000>;
|
|
mx-supply = <&VDD_MODEM_LEVEL>;
|
|
mx-uV-uA = <RPMH_REGULATOR_LEVEL_TURBO 100000>;
|
|
reg-names = "cx", "mx";
|
|
|
|
interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>,
|
|
<&aggre2_noc MASTER_CRYPTO &mc_virt SLAVE_EBI1>;
|
|
interconnect-names = "rproc_ddr","crypto_ddr";
|
|
|
|
qcom,qmp = <&aoss_qmp>;
|
|
memory-region = <&mpss_mem &system_cma>;
|
|
|
|
/* Inputs from mss */
|
|
interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
|
|
<&modem_smp2p_in 0 0>,
|
|
<&modem_smp2p_in 2 0>,
|
|
<&modem_smp2p_in 1 0>,
|
|
<&modem_smp2p_in 3 0>,
|
|
<&modem_smp2p_in 7 0>;
|
|
|
|
interrupt-names = "wdog",
|
|
"fatal",
|
|
"handover",
|
|
"ready",
|
|
"stop-ack",
|
|
"shutdown-ack";
|
|
|
|
/* Outputs to mss */
|
|
qcom,smem-states = <&modem_smp2p_out 0>;
|
|
qcom,smem-state-names = "stop";
|
|
|
|
glink-edge {
|
|
qcom,remote-pid = <1>;
|
|
transport = "smem";
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP>;
|
|
mbox-names = "mpss_smem";
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_MPSS
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
|
|
label = "modem";
|
|
qcom,glink-label = "mpss";
|
|
|
|
qcom,modem_qrtr {
|
|
qcom,glink-channels = "IPCRTR";
|
|
qcom,low-latency;
|
|
qcom,intents = <0x800 5
|
|
0x2000 3
|
|
0x4400 2>;
|
|
};
|
|
|
|
qcom,modem_ds {
|
|
qcom,glink-channels = "DS";
|
|
qcom,intents = <0x4000 0x2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
wpss_pas: remoteproc-wpss@8a00000 {
|
|
compatible = "qcom,ravelin-wpss-pas";
|
|
reg = <0x08a00000 0x10000>;
|
|
status = "ok";
|
|
|
|
memory-region = <&wpss_moselle_mem>;
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
clock-names = "xo";
|
|
|
|
cx-supply = <&VDD_CX_LEVEL>;
|
|
cx-uV-uA = <RPMH_REGULATOR_LEVEL_TURBO 100000>;
|
|
mx-supply = <&VDD_MX_LEVEL>;
|
|
mx-uV-uA = <RPMH_REGULATOR_LEVEL_TURBO 100000>;
|
|
reg-names = "cx","mx";
|
|
|
|
qcom,qmp = <&aoss_qmp>;
|
|
|
|
/* Inputs from wpss */
|
|
interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
|
|
<&wpss_smp2p_in 0 0>,
|
|
<&wpss_smp2p_in 2 0>,
|
|
<&wpss_smp2p_in 1 0>,
|
|
<&wpss_smp2p_in 3 0>,
|
|
<&wpss_smp2p_in 7 0>;
|
|
|
|
interrupt-names = "wdog",
|
|
"fatal",
|
|
"handover",
|
|
"ready",
|
|
"stop-ack",
|
|
"shutdown-ack";
|
|
|
|
/* Outputs to wpss */
|
|
qcom,smem-states = <&wpss_smp2p_out 0>;
|
|
qcom,smem-state-names = "stop";
|
|
|
|
glink-edge {
|
|
qcom,remote-pid = <13>;
|
|
transport = "smem";
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_WPSS
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP>;
|
|
mbox-names = "wpss_smem";
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_WPSS
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
|
|
label = "wpss";
|
|
qcom,glink-label = "wpss";
|
|
|
|
qcom,wpss_qrtr {
|
|
qcom,glink-channels = "IPCRTR";
|
|
qcom,intents = <0x800 5
|
|
0x2000 3
|
|
0x4400 2>;
|
|
};
|
|
|
|
};
|
|
};
|
|
|
|
spmi_bus: spmi0_bus: qcom,spmi@c42d000 {
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
reg = <0xc42d000 0x4000>,
|
|
<0xc400000 0x3000>,
|
|
<0xc500000 0x400000>,
|
|
<0xc440000 0x80000>,
|
|
<0xc4c0000 0x10000>;
|
|
reg-names = "cnfg", "core", "chnls", "obsrvr", "intr";
|
|
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "periph_irq";
|
|
interrupt-controller;
|
|
#interrupt-cells = <4>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
qcom,channel = <0>;
|
|
qcom,ee = <0>;
|
|
qcom,bus-id = <0>;
|
|
};
|
|
|
|
spmi0_debug_bus: qcom,spmi-debug@10b14000 {
|
|
compatible = "qcom,spmi-pmic-arb-debug";
|
|
reg = <0x10b14000 0x60>, <0x221c8784 0x4>;
|
|
reg-names = "core", "fuse";
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "core_clk";
|
|
qcom,fuse-enable-bit = <18>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
depends-on-supply = <&spmi0_bus>;
|
|
|
|
qcom,pmk8350-debug@0 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <0 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
qcom,pm6450-debug@1 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <1 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
qcom,pm8010-debug@4 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <4 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
qcom,pmg1110-debug@6 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <6 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
};
|
|
|
|
qcom,pmic_glink {
|
|
compatible = "qcom,qti-pmic-glink";
|
|
qcom,pmic-glink-channel = "PMIC_RTR_ADSP_APPS";
|
|
qcom,subsys-name = "lpass";
|
|
qcom,protection-domain = "tms/servreg", "msm/adsp/charger_pd";
|
|
depends-on-supply = <&ipcc_mproc>;
|
|
status = "disabled";
|
|
|
|
battery_charger: qcom,battery_charger {
|
|
compatible = "qcom,battery-charger";
|
|
status = "disabled";
|
|
};
|
|
|
|
ucsi: qcom,ucsi {
|
|
compatible = "qcom,ucsi-glink";
|
|
status = "disabled";
|
|
connector {
|
|
port {
|
|
usb_port0_connector: endpoint {
|
|
remote-endpoint = <&usb_port0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
altmode: qcom,altmode {
|
|
compatible = "qcom,altmode-glink";
|
|
#altmode-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
thermal_zones: thermal-zones {
|
|
};
|
|
|
|
eud: qcom,msm-eud@88e0000 {
|
|
compatible = "qcom,msm-eud";
|
|
interrupt-names = "eud_irq";
|
|
interrupt-parent = <&pdc>;
|
|
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x088e0000 0x2000>,
|
|
<0x088e2000 0x1000>;
|
|
reg-names = "eud_base", "eud_mode_mgr2";
|
|
clocks = <&gcc GCC_EUSB3_0_CLKREF_EN>;
|
|
clock-names = "eud_clkref_clk";
|
|
qcom,secure-eud-en;
|
|
status = "ok";
|
|
};
|
|
|
|
qrtr-gunyah {
|
|
compatible = "qcom,qrtr-gunyah";
|
|
qcom,master;
|
|
gunyah-label = <3>;
|
|
peer-name = <2>;
|
|
shared-buffer = <&trust_ui_vm_qrtr>;
|
|
};
|
|
|
|
trust_ui_vm: qcom,trust_ui_vm@e55fc000 {
|
|
reg = <0xe55fc000 0x104000>;
|
|
vm_name = "trustedvm";
|
|
shared-buffers = <&trust_ui_vm_vblk0_ring &trust_ui_vm_swiotlb>;
|
|
};
|
|
|
|
qcom,virtio_backend@0 {
|
|
compatible = "qcom,virtio_backend";
|
|
qcom,vm = <&trust_ui_vm>;
|
|
qcom,label = <0x11>;
|
|
};
|
|
|
|
vendor_hooks: qcom,cpu-vendor-hooks {
|
|
compatible = "qcom,cpu-vendor-hooks";
|
|
};
|
|
|
|
};
|
|
|
|
#include "ravelin-pinctrl.dtsi"
|
|
#include "diwali-gdsc.dtsi"
|
|
#include "ipcc-test-ravelin.dtsi"
|
|
#include "ravelin-qupv3.dtsi"
|
|
#include "ravelin-regulators.dtsi"
|
|
#include "ravelin-pcie.dtsi"
|
|
#include "ravelin-wcn6750.dtsi"
|
|
|
|
&qupv3_se7_2uart {
|
|
status = "ok";
|
|
};
|
|
|
|
&qupv3_se2_4uart {
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_pcie_0_gdsc {
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_ufs_phy_gdsc {
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_usb30_prim_gdsc {
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_vcodec0_gdsc {
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_venus_gdsc {
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&hlos1_vote_mmnoc_mmu_tbu_sf0_gdsc {
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc {
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&hlos1_vote_mmnoc_mmu_tbu_hf1_gdsc {
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&cam_cc_camss_top_gdsc {
|
|
clocks = <&gcc GCC_CAMERA_AHB_CLK>;
|
|
clock-names = "ahb_clk";
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
qcom,support-hw-trigger;
|
|
status = "ok";
|
|
};
|
|
|
|
&disp_cc_mdss_core_gdsc {
|
|
clocks = <&gcc GCC_DISP_AHB_CLK>;
|
|
clock-names = "ahb_clk";
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&disp_cc_mdss_core_int2_gdsc {
|
|
clocks = <&gcc GCC_DISP_AHB_CLK>;
|
|
clock-names = "ahb_clk";
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gpu_cc_cx_gdsc {
|
|
clocks = <&gcc GCC_GPU_CFG_AHB_CLK>;
|
|
clock-names = "ahb_clk";
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gpu_cc_gx_gdsc {
|
|
clocks = <&gcc GCC_GPU_CFG_AHB_CLK>;
|
|
clock-names = "ahb_clk";
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
sw-reset = <&gpu_cc_gx_sw_reset>;
|
|
status = "ok";
|
|
};
|
|
|
|
&qupv3_se8_i2c {
|
|
status = "ok";
|
|
fsa4480: fsa4480@42 {
|
|
reg = <0x42>;
|
|
};
|
|
};
|
|
|
|
#include "ravelin-thermal.dtsi"
|
|
#include "ravelin-msm-rdbg.dtsi"
|