6f18ce8026
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
42 lines
1.3 KiB
Plaintext
42 lines
1.3 KiB
Plaintext
* Aptina 1/3-Inch WVGA CMOS Digital Image Sensor
|
|
|
|
The Aptina MT9V032 is a 1/3-inch CMOS active pixel digital image sensor with
|
|
an active array size of 752H x 480V. It is programmable through a simple
|
|
two-wire serial interface.
|
|
|
|
Required Properties:
|
|
|
|
- compatible: value should be either one among the following
|
|
(a) "aptina,mt9v022" for MT9V022 color sensor
|
|
(b) "aptina,mt9v022m" for MT9V022 monochrome sensor
|
|
(c) "aptina,mt9v024" for MT9V024 color sensor
|
|
(d) "aptina,mt9v024m" for MT9V024 monochrome sensor
|
|
(e) "aptina,mt9v032" for MT9V032 color sensor
|
|
(f) "aptina,mt9v032m" for MT9V032 monochrome sensor
|
|
(g) "aptina,mt9v034" for MT9V034 color sensor
|
|
(h) "aptina,mt9v034m" for MT9V034 monochrome sensor
|
|
|
|
Optional Properties:
|
|
|
|
- link-frequencies: List of allowed link frequencies in Hz. Each frequency is
|
|
expressed as a 64-bit big-endian integer.
|
|
- reset-gpios: GPIO handle which is connected to the reset pin of the chip.
|
|
- standby-gpios: GPIO handle which is connected to the standby pin of the chip.
|
|
|
|
For further reading on port node refer to
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
|
|
|
Example:
|
|
|
|
mt9v032@5c {
|
|
compatible = "aptina,mt9v032";
|
|
reg = <0x5c>;
|
|
|
|
port {
|
|
mt9v032_out: endpoint {
|
|
link-frequencies = /bits/ 64
|
|
<13000000 26600000 27000000>;
|
|
};
|
|
};
|
|
};
|