09992b738b
Update height alignments from 20 to 40 for HD 60FPS cmd mode to match DSC slice settings. The roi height and width alignment must be integral multiple of DSC slice height and width. Change-Id: I127af4c4e6a453757f60677bac787cd4bd4b6d07 Signed-off-by: Lei Chen <quic_chenlei@quicinc.com>
304 lines
7.4 KiB
Plaintext
304 lines
7.4 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include "sun-sde.dtsi"
|
|
#include "sun-sde-display-common.dtsi"
|
|
#include <dt-bindings/clock/qcom,dispcc-sun.h>
|
|
|
|
&pm8550_gpios {
|
|
display_panel_avdd_default: display_panel_avdd_default {
|
|
pins = "gpio11";
|
|
function = "normal";
|
|
input-disable;
|
|
output-enable;
|
|
bias-disable;
|
|
power-source = <1>;
|
|
qcom,drive-strength = <3>;
|
|
};
|
|
};
|
|
|
|
&soc {
|
|
sde_wb1: qcom,wb-display@1 {
|
|
compatible = "qcom,wb-display";
|
|
cell-index = <0>;
|
|
label = "wb_display1";
|
|
};
|
|
|
|
sde_wb2: qcom,wb-display@2 {
|
|
compatible = "qcom,wb-display";
|
|
cell-index = <1>;
|
|
label = "wb_display2";
|
|
};
|
|
|
|
|
|
display_panel_avdd: display_gpio_regulator@1 {
|
|
compatible = "qti-regulator-fixed";
|
|
regulator-name = "display_panel_avdd";
|
|
regulator-min-microvolt = <5500000>;
|
|
regulator-max-microvolt = <5500000>;
|
|
regulator-enable-ramp-delay = <233>;
|
|
gpio = <&pm8550_gpios 11 0>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
proxy-supply = <&display_panel_avdd>;
|
|
qcom,proxy-consumer-enable;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
disp_rdump_memory: disp_rdump_region@0xd5500000 {
|
|
reg = <0xfc800000 0x00800000>;
|
|
label = "disp_rdump_region";
|
|
};
|
|
};
|
|
|
|
&reserved_memory {
|
|
splash_memory: splash_region {
|
|
reg = <0x0 0xfc800000 0x0 0x02b00000>;
|
|
label = "cont_splash_region";
|
|
};
|
|
/*
|
|
* Demura memory regions are to be commented out if
|
|
* feature not in use.
|
|
*/
|
|
demura_memory_0: demura_region_0 {
|
|
reg = <0x0 0x0 0x0 0x0>;
|
|
label = "demura hfc region 0";
|
|
};
|
|
|
|
demura_memory_1: demura_region_1 {
|
|
reg = <0x0 0x0 0x0 0x0>;
|
|
label = "demura hfc region 1";
|
|
};
|
|
};
|
|
|
|
&sde_dsi {
|
|
clocks = <&mdss_dsi_phy0 0>,
|
|
<&mdss_dsi_phy0 1>,
|
|
<&mdss_dsi_phy1 0>,
|
|
<&mdss_dsi_phy1 1>,
|
|
/*
|
|
* Currently the dsi clock handles are under the dsi
|
|
* controller DT node. As soon as the controller probe
|
|
* finishes, the dispcc sync state can get called before
|
|
* the dsi_display probe potentially disturbing the clock
|
|
* votes for cont_splash use case. Hence we are no longer
|
|
* protected by the component model in this case against the
|
|
* disp cc sync state getting triggered after the dsi_ctrl
|
|
* probe. To protect against this incorrect sync state trigger
|
|
* add this dummy MDP clk vote handle to the dsi_display
|
|
* DT node. Since the dsi_display driver does not parse
|
|
* MDP clock nodes, no actual vote shall be added and this
|
|
* change is done just to satisfy sync state requirements.
|
|
*/
|
|
<&dispcc DISP_CC_MDSS_MDP_CLK>;
|
|
clock-names = "pll_byte_clk0", "pll_dsi_clk0",
|
|
"pll_byte_clk1", "pll_dsi_clk1",
|
|
"mdp_core_clk";
|
|
vddio-supply = <&L12B>;
|
|
vci-supply = <&L13B>;
|
|
vdd-supply = <&L11B>;
|
|
tvdd-supply = <&L4B>;
|
|
};
|
|
|
|
&sde_dsi1 {
|
|
clocks = <&mdss_dsi_phy0 0>,
|
|
<&mdss_dsi_phy0 1>,
|
|
<&mdss_dsi_phy1 0>,
|
|
<&mdss_dsi_phy1 1>,
|
|
/*
|
|
* Currently the dsi clock handles are under the dsi
|
|
* controller DT node. As soon as the controller probe
|
|
* finishes, the dispcc sync state can get called before
|
|
* the dsi_display probe potentially disturbing the clock
|
|
* votes for cont_splash use case. Hence we are no longer
|
|
* protected by the component model in this case against the
|
|
* disp cc sync state getting triggered after the dsi_ctrl
|
|
* probe. To protect against this incorrect sync state trigger
|
|
* add this dummy MDP clk vote handle to the dsi_display
|
|
* DT node. Since the dsi_display driver does not parse
|
|
* MDP clock nodes, no actual vote shall be added and this
|
|
* change is done just to satisfy sync state requirements.
|
|
*/
|
|
<&dispcc DISP_CC_MDSS_MDP_CLK>;
|
|
clock-names = "pll_byte_clk0", "pll_dsi_clk0",
|
|
"pll_byte_clk1", "pll_dsi_clk1",
|
|
"mdp_core_clk";
|
|
vddio-supply = <&L12B>;
|
|
vci-supply = <&L13B>;
|
|
vdd-supply = <&L11B>;
|
|
tvdd-supply = <&L4B>;
|
|
};
|
|
|
|
&mdss_mdp {
|
|
connectors = <&sde_dsi &sde_dsi1 &smmu_sde_unsec &smmu_sde_sec &sde_wb1 &sde_wb2
|
|
&sde_dp &sde_cesta>;
|
|
};
|
|
|
|
&dsi_vtdr6130_amoled_cmd {
|
|
qcom,ulps-enabled;
|
|
qcom,mdss-dsi-display-timings {
|
|
timing@0 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <540 40 40 40 1080 40>;
|
|
};
|
|
|
|
timing@1 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <540 40 40 40 1080 40>;
|
|
};
|
|
|
|
timing@2 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <540 40 40 40 1080 40>;
|
|
};
|
|
|
|
timing@3 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <540 40 40 40 1080 40>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&dsi_vtdr6130_amoled_qsync_144hz_cmd {
|
|
qcom,ulps-enabled;
|
|
};
|
|
|
|
&dsi_nt37801_amoled_cmd {
|
|
qcom,mdss-dsi-display-timings {
|
|
timing@0 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <720 40 720 40 1440 40>;
|
|
};
|
|
|
|
timing@1 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <720 40 720 40 1440 40>;
|
|
};
|
|
|
|
timing@2 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <720 40 720 40 1440 40>;
|
|
};
|
|
|
|
timing@3 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <720 40 720 40 1440 40>;
|
|
};
|
|
|
|
timing@4 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <720 40 720 40 1440 40>;
|
|
};
|
|
|
|
timing@5 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <720 40 720 40 1440 40>;
|
|
};
|
|
|
|
timing@6 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <720 40 720 40 1440 40>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&dsi_nt37801_amoled_cmd_cphy {
|
|
qcom,mdss-dsi-display-timings {
|
|
timing@0 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <720 40 720 40 1440 40>;
|
|
};
|
|
|
|
timing@1 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <720 40 720 40 1440 40>;
|
|
};
|
|
|
|
timing@2 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <720 40 720 40 1440 40>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&dsi_nt37801_amoled_fhd_plus_cmd {
|
|
qcom,mdss-dsi-display-timings {
|
|
timing@0 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <540 40 540 40 1080 40>;
|
|
};
|
|
|
|
timing@1 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <540 40 540 40 1080 40>;
|
|
};
|
|
|
|
timing@2 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <540 40 540 40 1080 40>;
|
|
};
|
|
|
|
timing@3 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <540 40 540 40 1080 40>;
|
|
};
|
|
|
|
timing@4 {
|
|
qcom,partial-update-enabled = "single_roi";
|
|
qcom,panel-roi-alignment = <540 40 540 40 1080 40>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&dsi_sharp_4k_dsc_cmd {
|
|
qcom,ulps-enabled;
|
|
};
|
|
|
|
&dsi_sim_cmd {
|
|
qcom,ulps-enabled;
|
|
qcom,mdss-dsi-display-timings {
|
|
timing@0 { /* WQHD 60FPS cmd vid mode*/
|
|
qcom,panel-roi-alignment = <720 40 720 40 720 40>;
|
|
qcom,partial-update-enabled = "single_roi";
|
|
};
|
|
|
|
timing@2 { /* FHD 60FPS cmd mode*/
|
|
qcom,panel-roi-alignment = <540 40 540 40 540 40>;
|
|
qcom,partial-update-enabled = "single_roi";
|
|
};
|
|
|
|
timing@3 { /* HD 60FPS cmd mode*/
|
|
qcom,panel-roi-alignment = <360 40 360 40 360 40>;
|
|
qcom,partial-update-enabled = "single_roi";
|
|
};
|
|
};
|
|
};
|
|
|
|
&dsi_sim_dsc_375_cmd {
|
|
qcom,ulps-enabled;
|
|
};
|
|
|
|
&dsi_sim_dsc_10b_cmd {
|
|
qcom,ulps-enabled;
|
|
};
|
|
|
|
&dsi_dual_sim_cmd {
|
|
qcom,ulps-enabled;
|
|
};
|
|
|
|
&dsi_dual_sim_dsc_375_cmd {
|
|
qcom,ulps-enabled;
|
|
};
|
|
|
|
&dsi_sim_sec_hd_cmd {
|
|
qcom,ulps-enabled;
|
|
qcom,mdss-dsi-display-timings {
|
|
timing@0 {
|
|
qcom,panel-roi-alignment = <720 40 720 40 720 40>;
|
|
qcom,partial-update-enabled = "single_roi";
|
|
};
|
|
};
|
|
};
|