Files
android_kernel_samsung_sm87…/qcom/kera-mtp.dtsi
Anand Tarakh e35701ca99 ARM: dts: msm: update touch io base address to spi qup node for kera
Update trusted touch io base address to spi qup node address for kera.

Change-Id: Ice0a8e82b62f3f44b5ceb12d89744c1c11681da1
Signed-off-by: Anand Tarakh <quic_atarakh@quicinc.com>
2025-01-03 19:58:01 +05:30

80 lines
2.0 KiB
Plaintext

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/qcom,gcc-kera.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
#include "pmk8550.dtsi"
&sdhc_2 {
vdd-supply = <&L13B>;
qcom,vdd-voltage-level = <2960000 2960000>;
qcom,vdd-current-level = <0 976270>;
vdd-io-supply = <&L23B>;
qcom,vdd-io-voltage-level = <1800000 2960000>;
qcom,vdd-io-current-level = <0 5830>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_on>;
pinctrl-1 = <&sdc2_off>;
cd-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
qcom,uses_level_shifter;
status = "ok";
};
&wcd_usbss {
interrupt-parent = <&spmi_bus>;
interrupts = <0x0 0xb6 0x1 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "usb_wcd";
nvmem-cells = <&usb_mode>;
nvmem-cell-names = "usb_mode";
};
&qupv3_se8_spi {
#address-cells = <1>;
#size-cells = <0>;
status = "ok";
qcom,touch-active = "goodix,gt9916S";
qcom,la-vm;
goodix-berlin@0 {
compatible = "goodix,gt9916S";
reg = <0>;
spi-max-frequency = <1000000>;
interrupt-parent = <&tlmm>;
interrupts = <13 0x2008>;
goodix,reset-gpio = <&tlmm 16 0x00>;
goodix,irq-gpio = <&tlmm 13 0x2008>;
goodix,irq-flags = <2>;
goodix,panel-max-x = <1080>;
goodix,panel-max-y = <2400>;
goodix,panel-max-w = <255>;
goodix,panel-max-p = <4096>;
goodix,firmware-name = "goodix_firmware_spi.bin";
goodix,config-name = "goodix_cfg_group_spi.bin";
goodix,avdd-name = "avdd";
goodix,iovdd-name = "iovdd";
avdd-supply = <&L22B>;
iovdd-supply = <&L8B>;
goodix,touch-type = "primary";
goodix,qts_en;
qts,trusted-touch-mode = "vm_mode";
qts,touch-environment = "pvm";
qts,trusted-touch-type = "primary";
qts,trusted-touch-spi-irq = <653>;
qts,trusted-touch-io-bases = <0x880000>;
qts,trusted-touch-io-sizes = <0x1000>;
qts,trusted-touch-vm-gpio-list = <&tlmm 0 0 &tlmm 1 0 &tlmm 2 0
&tlmm 3 0 &tlmm 16 0 &tlmm 13 0x2008>;
};
};