Files
android_kernel_samsung_sm87…/qcom/kera-mtp.dtsi
Kavya Nunna 5887bcc216 ARM: dts: msm: Add ldo-ocp-notifier support for kera
Add ldo-ocp-notifier support for kera platforms.

Change-Id: I6aac9f6faeda06152647cdb56dc2064eca4a64a6
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
2025-04-15 02:21:48 -07:00

151 lines
3.8 KiB
Plaintext

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/qcom,gcc-kera.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&sdhc_2 {
vdd-supply = <&L13B>;
qcom,vdd-voltage-level = <2960000 2960000>;
qcom,vdd-current-level = <0 976270>;
vdd-io-supply = <&L23B>;
qcom,vdd-io-voltage-level = <1800000 2960000>;
qcom,vdd-io-current-level = <0 5830>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_on>;
pinctrl-1 = <&sdc2_off>;
cd-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
qcom,uses_level_shifter;
status = "ok";
};
&wcd_usbss {
interrupt-parent = <&spmi_bus>;
interrupts = <0x0 0xb6 0x1 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "usb_wcd";
nvmem-cells = <&usb_mode>;
nvmem-cell-names = "usb_mode";
status = "ok";
};
&qupv3_se8_spi {
#address-cells = <1>;
#size-cells = <0>;
status = "ok";
qcom,touch-active = "goodix,gt9916S";
qcom,la-vm;
goodix-berlin@0 {
compatible = "goodix,gt9916S";
reg = <0>;
spi-max-frequency = <1000000>;
interrupt-parent = <&tlmm>;
interrupts = <13 0x2008>;
goodix,reset-gpio = <&tlmm 16 0x00>;
goodix,irq-gpio = <&tlmm 13 0x2008>;
goodix,irq-flags = <2>;
goodix,panel-max-x = <1080>;
goodix,panel-max-y = <2400>;
goodix,panel-max-w = <255>;
goodix,panel-max-p = <4096>;
goodix,firmware-name = "goodix_firmware_spi.bin";
goodix,config-name = "goodix_cfg_group_spi.bin";
goodix,avdd-name = "avdd";
goodix,iovdd-name = "iovdd";
avdd-supply = <&L22B>;
iovdd-supply = <&L8B>;
goodix,touch-type = "primary";
goodix,qts_en;
qts,trusted-touch-mode = "vm_mode";
qts,touch-environment = "pvm";
qts,trusted-touch-type = "primary";
qts,trusted-touch-spi-irq = <653>;
qts,trusted-touch-io-bases = <0x880000>;
qts,trusted-touch-io-sizes = <0x1000>;
qts,trusted-touch-vm-gpio-list = <&tlmm 0 0 &tlmm 1 0 &tlmm 2 0
&tlmm 3 0 &tlmm 16 0 &tlmm 13 0x2008>;
};
};
&pmxr2230_sys_therm_11 {
status = "disabled";
};
&sys_therm_11 {
status = "disabled";
};
&pm8550ve_f_die_temp {
status = "disabled";
};
&usb0 {
qcom,wcd_usbss = <&wcd_usbss>;
};
&regulator_ocp_notifier {
periph-1c1-supply = <&L1B>;
periph-1c2-supply = <&L2B>;
periph-1c3-supply = <&L3B_LEVEL>;
periph-1c4-supply = <&L4B>;
periph-1c5-supply = <&L5B>;
periph-1c6-supply = <&L6B>;
periph-1c7-supply = <&L7B>;
periph-1c8-supply = <&L8B>;
periph-1c9-supply = <&L9B>;
periph-1ca-supply = <&L10B>;
periph-1cb-supply = <&L11B>;
periph-1cc-supply = <&L12B>;
periph-1cd-supply = <&L13B>;
periph-1ce-supply = <&L14B>;
periph-1cf-supply = <&L15B>;
periph-1d0-supply = <&L16B>;
periph-1d1-supply = <&L17B>;
periph-1d2-supply = <&L18B>;
periph-1d3-supply = <&L19B>;
periph-1d4-supply = <&L20B>;
periph-1d5-supply = <&L21B>;
periph-1d6-supply = <&L22B>;
periph-1d7-supply = <&L23B>;
periph-19b-supply = <&S1B>;
periph-19e-supply = <&S2B>;
periph-1a1-supply = <&S3B>;
periph-1a2-supply = <&S4B>;
periph-1e4-supply = <&BOB>;
periph-3c1-supply = <&L1D>;
periph-3c2-supply = <&L2D>;
periph-3c3-supply = <&L3D_LEVEL>;
periph-39b-supply = <&S1D_LEVEL>;
periph-3a1-supply = <&S3D_LEVEL>;
periph-3a2-supply = <&S4D_LEVEL>;
periph-3a3-supply = <&S5D_LEVEL>;
periph-6c1-supply = <&L1G>;
periph-6c2-supply = <&L2G>;
periph-6c3-supply = <&L3G>;
periph-c40-supply = <&L1M>;
periph-c41-supply = <&L2M>;
periph-c42-supply = <&L3M>;
periph-c43-supply = <&L4M>;
periph-c44-supply = <&L5M>;
periph-c45-supply = <&L6M>;
periph-c46-supply = <&L7M>;
periph-d40-supply = <&L1N>;
periph-d41-supply = <&L2N>;
periph-d42-supply = <&L3N>;
periph-d43-supply = <&L4N>;
periph-d44-supply = <&L5N>;
periph-d45-supply = <&L6N>;
periph-d46-supply = <&L7N>;
};