dc4c61bc05
Hap_swr_slave regulator device controls register which takes SWR slave out of reset, it's being reused to reset VI_sense block in pmih010x haptics. SWR needs to be kept enabled to keep VI_sense enabled. Hence, make hap_swr_slave regulator device always on. Change-Id: Idf9f09b972b18cb836f643b85a1a587ab5af8f32 Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
297 lines
6.8 KiB
Plaintext
297 lines
6.8 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/spmi/spmi.h>
|
|
#include <dt-bindings/input/qcom,hv-haptics.h>
|
|
|
|
&spmi_bus {
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <4>;
|
|
|
|
qcom,pmih010x@7 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <0x7 SPMI_USID>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pmih010x_tz: pmih010x-temp-alarm@a00 {
|
|
compatible = "qcom,spmi-temp-alarm";
|
|
reg = <0xa00>;
|
|
interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
pmih010x_lite_tz: pmih010x-temp-alarm-lite@c00 {
|
|
compatible = "qcom,spmi-temp-alarm";
|
|
reg = <0xc00>;
|
|
interrupts = <0x7 0xc 0x0 IRQ_TYPE_EDGE_BOTH>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
pmih010x_gpios: pinctrl@8800 {
|
|
compatible = "qcom,pmih010x-gpio";
|
|
reg = <0x8800>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
pmih010x_eusb2_repeater: eusb2-repeater@fd00 {
|
|
compatible = "qcom,pmic-eusb2-repeater";
|
|
reg = <0xfd00>;
|
|
};
|
|
|
|
pmih010x_haptics: qcom,hv-haptics@f000 {
|
|
compatible = "qcom,hv-haptics";
|
|
reg = <0xf000>, <0xf100>, <0xf200>;
|
|
interrupts = <0x7 0xf0 0x1 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "fifo-empty";
|
|
qcom,vmax-mv = <3600>;
|
|
qcom,lra-period-us = <6667>;
|
|
qcom,brake-mode = <BRAKE_CLOSE_LOOP>;
|
|
qcom,brake-pattern = /bits/ 8 <0xff 0x3f 0x1f>;
|
|
qcom,drv-sig-shape = <WF_SINE>;
|
|
qcom,brake-sig-shape = <WF_SINE>;
|
|
qcom,rt-imp-detect;
|
|
|
|
hap_swr_slave_reg: qcom,hap-swr-slave-reg {
|
|
regulator-name = "hap-swr-slave-reg";
|
|
regulator-always-on;
|
|
};
|
|
|
|
/*
|
|
* Following sub-nodes are just examples of effects
|
|
* that play with FIFO mode. qcom,wf-fifo-data and
|
|
* qcom,wf-fifo-period and some other waveform related
|
|
* properties need to be updated for specific waveforms.
|
|
*/
|
|
effect_0 {
|
|
/* CLICK */
|
|
qcom,effect-id = <0>;
|
|
qcom,wf-vmax-mv = <3600>;
|
|
qcom,wf-fifo-preload;
|
|
qcom,wf-fifo-data = [7f 7f 7f 7f];
|
|
qcom,wf-fifo-period = <S_PERIOD_T_LRA>;
|
|
qcom,wf-auto-res-disable;
|
|
qcom,wf-brake-disable;
|
|
};
|
|
|
|
effect_1 {
|
|
/* DOUBLE_CLICK */
|
|
qcom,effect-id = <1>;
|
|
qcom,wf-vmax-mv = <3600>;
|
|
qcom,wf-fifo-preload;
|
|
qcom,wf-fifo-data = [7f 7f 7f 7f 7f 7f];
|
|
qcom,wf-fifo-period = <S_PERIOD_T_LRA>;
|
|
qcom,wf-auto-res-disable;
|
|
qcom,wf-brake-disable;
|
|
};
|
|
|
|
effect_2 {
|
|
/* TICK */
|
|
qcom,effect-id = <2>;
|
|
qcom,wf-vmax-mv = <3600>;
|
|
qcom,wf-fifo-preload;
|
|
qcom,wf-fifo-data = [7f 7f];
|
|
qcom,wf-fifo-period = <S_PERIOD_T_LRA>;
|
|
qcom,wf-auto-res-disable;
|
|
qcom,wf-brake-disable;
|
|
};
|
|
|
|
effect_3 {
|
|
/* THUD */
|
|
qcom,effect-id = <3>;
|
|
qcom,wf-vmax-mv = <3600>;
|
|
qcom,wf-fifo-preload;
|
|
qcom,wf-fifo-data = [7f 7f 7f];
|
|
qcom,wf-fifo-period = <S_PERIOD_T_LRA>;
|
|
qcom,wf-auto-res-disable;
|
|
qcom,wf-brake-disable;
|
|
};
|
|
|
|
effect_4 {
|
|
/* POP */
|
|
qcom,effect-id = <4>;
|
|
qcom,wf-vmax-mv = <3600>;
|
|
qcom,wf-fifo-preload;
|
|
qcom,wf-fifo-data = [7f 7f 7f];
|
|
qcom,wf-fifo-period = <S_PERIOD_T_LRA>;
|
|
qcom,wf-auto-res-disable;
|
|
qcom,wf-brake-disable;
|
|
};
|
|
|
|
effect_5 {
|
|
/* HEAVY_CLICK */
|
|
qcom,effect-id = <5>;
|
|
qcom,wf-vmax-mv = <3600>;
|
|
qcom,wf-fifo-preload;
|
|
qcom,wf-fifo-data = [7f 7f 7f 7f 7f 7f];
|
|
qcom,wf-fifo-period = <S_PERIOD_T_LRA>;
|
|
qcom,wf-auto-res-disable;
|
|
qcom,wf-brake-disable;
|
|
};
|
|
|
|
primitive_0 {
|
|
/* NOOP */
|
|
qcom,primitive-id = <0>;
|
|
qcom,wf-vmax-mv = <3600>;
|
|
qcom,wf-fifo-preload;
|
|
qcom,wf-fifo-data = [00 00 00 00];
|
|
qcom,wf-fifo-period = <S_PERIOD_T_LRA>;
|
|
qcom,wf-auto-res-disable;
|
|
qcom,wf-brake-disable;
|
|
};
|
|
|
|
primitive_1 {
|
|
/* CLICK */
|
|
qcom,primitive-id = <1>;
|
|
qcom,wf-vmax-mv = <3600>;
|
|
qcom,wf-fifo-preload;
|
|
qcom,wf-fifo-data = [7f 7f];
|
|
qcom,wf-fifo-period = <S_PERIOD_T_LRA>;
|
|
qcom,wf-auto-res-disable;
|
|
qcom,wf-brake-disable;
|
|
};
|
|
|
|
primitive_2 {
|
|
/* THUD */
|
|
qcom,primitive-id = <2>;
|
|
qcom,wf-vmax-mv = <3600>;
|
|
qcom,wf-fifo-preload;
|
|
qcom,wf-fifo-data = [7f 7f];
|
|
qcom,wf-fifo-period = <S_PERIOD_T_LRA>;
|
|
qcom,wf-auto-res-disable;
|
|
qcom,wf-brake-disable;
|
|
};
|
|
|
|
primitive_3 {
|
|
/* SPIN */
|
|
qcom,primitive-id = <3>;
|
|
qcom,wf-vmax-mv = <3600>;
|
|
qcom,wf-fifo-preload;
|
|
qcom,wf-fifo-data = [7f 7f];
|
|
qcom,wf-fifo-period = <S_PERIOD_T_LRA>;
|
|
qcom,wf-auto-res-disable;
|
|
qcom,wf-brake-disable;
|
|
};
|
|
|
|
primitive_4 {
|
|
/* QUICK_RISE */
|
|
qcom,primitive-id = <4>;
|
|
qcom,wf-vmax-mv = <3600>;
|
|
qcom,wf-fifo-preload;
|
|
qcom,wf-fifo-data = [7f 7f];
|
|
qcom,wf-fifo-period = <S_PERIOD_T_LRA>;
|
|
qcom,wf-auto-res-disable;
|
|
qcom,wf-brake-disable;
|
|
};
|
|
|
|
primitive_5 {
|
|
/* SLOW_RISE */
|
|
qcom,primitive-id = <5>;
|
|
qcom,wf-vmax-mv = <3600>;
|
|
qcom,wf-fifo-preload;
|
|
qcom,wf-fifo-data = [7f 7f];
|
|
qcom,wf-fifo-period = <S_PERIOD_T_LRA>;
|
|
qcom,wf-auto-res-disable;
|
|
qcom,wf-brake-disable;
|
|
};
|
|
|
|
primitive_6 {
|
|
/* QUICK_FALL */
|
|
qcom,primitive-id = <6>;
|
|
qcom,wf-vmax-mv = <3600>;
|
|
qcom,wf-fifo-preload;
|
|
qcom,wf-fifo-data = [7f 7f];
|
|
qcom,wf-fifo-period = <S_PERIOD_T_LRA>;
|
|
qcom,wf-auto-res-disable;
|
|
qcom,wf-brake-disable;
|
|
};
|
|
|
|
primitive_7 {
|
|
/* LIGHT_TICK */
|
|
qcom,primitive-id = <7>;
|
|
qcom,wf-vmax-mv = <3600>;
|
|
qcom,wf-fifo-preload;
|
|
qcom,wf-fifo-data = [7f 7f];
|
|
qcom,wf-fifo-period = <S_PERIOD_T_LRA>;
|
|
qcom,wf-auto-res-disable;
|
|
qcom,wf-brake-disable;
|
|
};
|
|
|
|
primitive_8 {
|
|
/* LOW_TICK */
|
|
qcom,primitive-id = <8>;
|
|
qcom,wf-vmax-mv = <3600>;
|
|
qcom,wf-fifo-preload;
|
|
qcom,wf-fifo-data = [7f 7f];
|
|
qcom,wf-fifo-period = <S_PERIOD_T_LRA>;
|
|
qcom,wf-auto-res-disable;
|
|
qcom,wf-brake-disable;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&thermal_zones {
|
|
pmih010x_temp_alarm: pmih010x_tz {
|
|
polling-delay-passive = <100>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "step_wise";
|
|
thermal-sensors = <&pmih010x_tz>;
|
|
|
|
trips {
|
|
pmih010x_trip0: trip0 {
|
|
temperature = <95000>;
|
|
hysteresis = <0>;
|
|
type = "passive";
|
|
};
|
|
|
|
pmih010x_trip1: trip1 {
|
|
temperature = <115000>;
|
|
hysteresis = <0>;
|
|
type = "passive";
|
|
};
|
|
|
|
pmih010x_trip2: trip2 {
|
|
temperature = <145000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
pmih010x_lite_temp_alarm: pmih010x_lite_tz {
|
|
polling-delay-passive = <100>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "step_wise";
|
|
thermal-sensors = <&pmih010x_lite_tz>;
|
|
|
|
trips {
|
|
pmih010x_lite_trip0: trip0 {
|
|
temperature = <125000>;
|
|
hysteresis = <0>;
|
|
type = "passive";
|
|
};
|
|
|
|
pmih010x_lite_trip1: trip1 {
|
|
temperature = <135000>;
|
|
hysteresis = <0>;
|
|
type = "passive";
|
|
};
|
|
|
|
pmih010x_lite_trip2: trip2 {
|
|
temperature = <145000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|