samsung_sm8750/android_kernel_samsung_sm8750-devicetrees
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
d57904377fb60a19d2842237f54af9903e249e3f
android_kernel_samsung_sm87…/sun-camera-sensor-rumi.dtsi
Lokesh Kumar Aakulu d57904377f ARM: dts: msm: Adjust max volt for S7I regulator 
There are few consumers for S7I regulator like
BT and Wlan where there min voltage was greater
than 1.256v hence adjust max voltage to accommodate
other clients.

CRs-Fixed: 3656092
Change-Id: Ieedc7eb70b8f16c7c051dbe1ca7cd2d9841f6c4e
Signed-off-by: Lokesh Kumar Aakulu <quic_lkumar@quicinc.com>
2023-11-29 11:47:05 -08:00

777 lines
23 KiB
Plaintext
Raw Blame History

#include <dt-bindings/msm-camera.h>
&soc {
led_flash_triple_rear_wide: qcom,camera-flash1 {
cell-index = <1>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
led_flash_triple_rear_tele: qcom,camera-flash2 {
cell-index = <2>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
led_flash_triple_rear_ultrawide: qcom,camera-flash3 {
cell-index = <3>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
led_flash_asc_rear: qcom,camera-flash4 {
cell-index = <4>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
led_flash_rear_aux: qcom,camera-flash5 {
cell-index = <5>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
qcom,cam-res-mgr {
compatible = "qcom,cam-res-mgr";
status = "ok";
};
};
&cam_cci0 {
actuator_triple_wide: qcom,actuator2 {
cell-index = <2>;
compatible = "qcom,actuator";
cci-master = <CCI_MASTER_1>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <119000>;
status = "ok";
};
actuator_rear_aux: qcom,actuator8 {
cell-index = <8>;
compatible = "qcom,actuator";
cci-master = <CCI_MASTER_0>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <100000>;
status = "ok";
};
ois_wide: qcom,ois0 {
cell-index = <2>;
compatible = "qcom,ois";
cci-master = <CCI_MASTER_1>;
cam_vio-supply = <&L5M>;
cam_vaf-supply = <&L7M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
regulator-names = "cam_vio","cam_vaf", "cam_clk";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2960000 0>;
rgltr-max-voltage = <1800000 2960000 0>;
rgltr-load-current = <4000 220000 0>;
status = "ok";
};
eeprom_tof1: qcom,eeprom7 {
cell-index = <7>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&S7I>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L5N>;
cam_v_custom1-supply = <&L7N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig",
"cam_clk", "cam_vana", "cam_v_custom1", "cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1256000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1340000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 89 0>,
<&tlmm 13 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
eeprom_rear_aux: qcom,eeprom8 {
cell-index = <8>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_vaf-supply = <&L7M>;
cam_v_custom1-supply = <&L6M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 2800000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 2800000>;
rgltr-load-current = <6400 850000 0 114500 100000 140000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 89 0>,
<&tlmm 13 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
eeprom_wide: qcom,eeprom2 {
cell-index = <2>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L6M>;
cam_vaf-supply = <&L7M>;
cam_v_custom1-supply = <&L3N>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
rgltr-load-current = <4000 913000 0 91400 119000 63100>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_active
&cam_sensor_active_rst1>;
pinctrl-1 = <&cam_sensor_mclk1_suspend
&cam_sensor_suspend_rst1>;
gpios = <&tlmm 90 0>,
<&tlmm 15 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET1";
cci-master = <CCI_MASTER_1>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK1_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor7 {
cell-index = <7>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <0>;
eeprom-src = <&eeprom_tof1>;
sensor-position-roll = <270>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&S7I>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L5N>;
cam_v_custom1-supply = <&L7N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig",
"cam_clk", "cam_vana", "cam_v_custom1", "cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1256000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1340000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 89 0>,
<&tlmm 13 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor2 {
cell-index = <2>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <1>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_wide>;
ois-src = <&ois_wide>;
actuator-src = <&actuator_triple_wide>;
led-flash-src = <&led_flash_triple_rear_wide>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L6M>;
cam_vaf-supply = <&L7M>;
cam_v_custom1-supply = <&L3N>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
rgltr-load-current = <4000 913000 0 91400 119000 63100>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_active
&cam_sensor_active_rst1>;
pinctrl-1 = <&cam_sensor_mclk1_suspend
&cam_sensor_suspend_rst1>;
gpios = <&tlmm 90 0>,
<&tlmm 15 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET1";
cci-master = <CCI_MASTER_1>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK1_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor8 {
cell-index = <8>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <0>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_rear_aux>;
actuator-src = <&actuator_rear_aux>;
led-flash-src = <&led_flash_rear_aux>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_vaf-supply = <&L7M>;
cam_v_custom1-supply = <&L6M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 2800000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 2800000>;
rgltr-load-current = <6400 850000 0 114500 100000 140000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 89 0>,
<&tlmm 13 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
&cam_cci1 {
actuator_triple_tele: qcom,actuator3{
cell-index = <3>;
compatible = "qcom,actuator";
cci-master = <CCI_MASTER_0>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <100000>;
status = "ok";
};
eeprom_tele: qcom,eeprom3 {
cell-index = <3>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L2M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L4M>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk",
"cam_vana", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-max-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-load-current = <4000 260700 0 67700 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk3_active
&cam_sensor_active_rst3>;
pinctrl-1 = <&cam_sensor_mclk3_suspend
&cam_sensor_suspend_rst3>;
gpios = <&tlmm 92 0>,
<&tlmm 109 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK3",
"CAM_RESET3";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK3_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor3 {
cell-index = <3>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <3>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_tele>;
actuator-src = <&actuator_triple_tele>;
led-flash-src = <&led_flash_triple_rear_tele>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L2M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L4M>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk",
"cam_vana", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-max-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-load-current = <4000 260700 0 67700 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk3_active
&cam_sensor_active_rst3>;
pinctrl-1 = <&cam_sensor_mclk3_suspend
&cam_sensor_suspend_rst3>;
gpios = <&tlmm 92 0>,
<&tlmm 109 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK3",
"CAM_RESET3";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK3_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
&cam_cci2 {
eeprom_tof2: qcom,eeprom5 {
cell-index = <5>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&S7I>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L5N>;
cam_v_custom1-supply = <&L7N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_v_custom1", "cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1256000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1340000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk5_active
&cam_sensor_active_rst5>;
pinctrl-1 = <&cam_sensor_mclk5_suspend
&cam_sensor_suspend_rst5>;
gpios = <&tlmm 94 0>,
<&tlmm 110 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK5",
"CAM_RESET5";
cci-master = <CCI_MASTER_1>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK5_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor5 {
cell-index = <5>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <5>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_tof2>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&S7I>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L5N>;
cam_v_custom1-supply = <&L7N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_v_custom1", "cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1256000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1340000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk5_active
&cam_sensor_active_rst5>;
pinctrl-1 = <&cam_sensor_mclk5_suspend
&cam_sensor_suspend_rst5>;
gpios = <&tlmm 94 0>,
<&tlmm 110 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK5",
"CAM_RESET5";
cci-master = <CCI_MASTER_1>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK5_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
&qupv3_se9_i2c {
status = "ok";
qcom,high-perf;
qcom,clk-freq-out = <1000000>;
qcom,pm-ctrl-client;
eeprom_asc_front: qcom,eeprom1 {
cell-index = <4>;
reg = <0x58>;
compatible = "qcom,cam-i2c-eeprom";
cam_vio-supply = <&L1I>;
cam_vdig-supply = <&L2N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L6N>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana";
rgltr-cntrl-support;
rgltr-min-voltage = <1200000 1104000 0 2800000>;
rgltr-max-voltage = <1200000 1104000 0 2800000>;
rgltr-load-current = <3000 283000 0 50000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk4_active
&cam_sensor_active_rst4>;
pinctrl-1 = <&cam_sensor_mclk4_suspend
&cam_sensor_suspend_rst4>;
gpios = <&tlmm 93 0>,
<&tlmm 7 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK4",
"CAM_RESET4";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK4_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor1 {
cell-index = <4>;
reg = <0x22>;
compatible = "qcom,cam-i2c-sensor";
csiphy-sd-index = <4>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <0>;
eeprom-src = <&eeprom_asc_front>;
cam_vio-supply = <&L1I>;
cam_vdig-supply = <&L2N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L6N>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana";
rgltr-cntrl-support;
aon-camera-id = <AON_CAM1>;
rgltr-min-voltage = <1200000 1104000 0 2800000>;
rgltr-max-voltage = <1200000 1104000 0 2800000>;
rgltr-load-current = <3000 283000 0 50000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk4_active
&cam_sensor_active_rst4>;
pinctrl-1 = <&cam_sensor_mclk4_suspend
&cam_sensor_suspend_rst4>;
gpios = <&tlmm 93 0>,
<&tlmm 7 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK4",
"CAM_RESET4";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK4_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
&i3c3 {
se-clock-frequency = <100000000>;
i3c-scl-hz = <12500000>;
dfs-index = <0>;
i2c-scl-hz = <1000000>;
qcom,pm-ctrl-client;
status = "ok";
actuator_UW_asc_rear: qcom,actuator@c {
cell-index = <1>;
compatible = "qcom,cam-i2c-actuator";
reg = <0x0C 0x00 0x10>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <100000>;
status = "ok";
};
eeprom_asc_rear: qcom,eeprom@50 {
cell-index = <6>;
reg = <0x50 0x00 0x10>;
compatible = "qcom,cam-i2c-eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_v_custom1-supply = <&L4N>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
"cam_v_custom1", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
rgltr-load-current = <6000 454000 0 77900 29400 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2>;
gpios = <&tlmm 91 0>,
<&tlmm 3 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
eeprom_i3c_UltraWide: qcom,eeprom@52 {
cell-index = <1>;
reg = <0x52 0x00 0x10>;
compatible = "qcom,cam-i2c-eeprom";
cam_vio-supply = <&L1I>;
cam_vdig-supply = <&L1M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
"cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1200000 1104000 0 2800000 2960000>;
rgltr-max-voltage = <1200000 1104000 0 2800000 2960000>;
rgltr-load-current = <3000 355000 0 95000 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2>;
gpios = <&tlmm 91 0>,
<&tlmm 3 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor@33,36008580000 {
cell-index = <1>;
reg = <0x33 0x360 0x08580000>;
assigned-address = <0xa>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <2>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_i3c_UltraWide>;
actuator-src = <&actuator_UW_asc_rear>;
led-flash-src = <&led_flash_triple_rear_ultrawide>;
cam_vio-supply = <&L1I>;
cam_vdig-supply = <&L1M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
"cam_vaf";
rgltr-cntrl-support;
i3c-target;
rgltr-min-voltage = <1200000 1104000 0 2800000 2960000>;
rgltr-max-voltage = <1200000 1104000 0 2800000 2960000>;
rgltr-load-current = <3000 355000 0 95000 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2
&cam_sensor_i3cSelect_active>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2
&cam_sensor_i3cSelect_suspend>;
gpios = <&tlmm 91 0>,
<&tlmm 3 0>,
<&tlmm 6 0>;
gpio-reset = <1>;
gpio-custom1 = <2>;
gpio-req-tbl-num = <0 1 2>;
gpio-req-tbl-flags = <1 0 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2",
"CAM_I3CSELECT";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor@10 {
cell-index = <6>;
reg = <0x10 0x00 0x10>;
compatible = "qcom,cam-i2c-sensor";
csiphy-sd-index = <2>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_asc_rear>;
actuator-src = <&actuator_UW_asc_rear>;
led-flash-src = <&led_flash_asc_rear>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_v_custom1-supply = <&L4N>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
"cam_v_custom1", "cam_vaf";
rgltr-cntrl-support;
aon-camera-id = <AON_CAM2>;
rgltr-min-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
rgltr-load-current = <6000 454000 0 77900 29400 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2
&cam_sensor_ponv_rear_active>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2
&cam_sensor_ponv_rear_suspend>;
gpios = <&tlmm 91 0>,
<&tlmm 3 0>,
<&tlmm 2 0>;
gpio-reset = <1>;
gpio-standby = <2>;
gpio-req-tbl-num = <0 1 2>;
gpio-req-tbl-flags = <1 0 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2",
"CAM_STANDBY";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
Reference in New Issue View Git Blame Copy Permalink