Files
android_kernel_samsung_sm87…/qcom/pm8550ve.dtsi
Manaf Meethalavalappu Pallikunhi 79a44b80b6 ARM: dts: qcom: update thermal zone shutdown trip type for sun
Use "hot" trip type for thermal zone software shutdown trip
for all thermal zones. It just notifies userspace thermal
manager which in turn triggers a graceful shutdown.

Change-Id: Icf7aa1f1da57a22b96ede18fcee75ebebb92830b
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
2024-03-25 23:48:04 +05:30

225 lines
4.5 KiB
Plaintext

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
pm8550ve_d: qcom,pm8550ve@3 {
compatible = "qcom,spmi-pmic";
reg = <0x3 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550ve_d_tz: pm8550ve-d-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550ve_d_gpios: pinctrl@8800 {
compatible = "qcom,pm8550ve-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550ve_f: qcom,pm8550ve@5 {
compatible = "qcom,spmi-pmic";
reg = <0x5 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550ve_f_tz: pm8550ve-f-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550ve_f_gpios: pinctrl@8800 {
compatible = "qcom,pm8550ve-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550ve_g: qcom,pm8550ve@6 {
compatible = "qcom,spmi-pmic";
reg = <0x6 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550ve_g_tz: pm8550ve-g-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550ve_g_gpios: pinctrl@8800 {
compatible = "qcom,pm8550ve-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550ve_i: qcom,pm8550ve@8 {
compatible = "qcom,spmi-pmic";
reg = <0x8 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550ve_i_tz: pm8550ve-i-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x8 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550ve_i_gpios: pinctrl@8800 {
compatible = "qcom,pm8550ve-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
&thermal_zones {
pm8550ve_d_temp_alarm: pm8550ve_d_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550ve_d_tz>;
status = "disabled";
trips {
pm8550ve_d_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550ve_d_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
pm8550ve_d_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
pm8550ve_f_temp_alarm: pm8550ve_f_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550ve_f_tz>;
status = "disabled";
trips {
pm8550ve_f_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550ve_f_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
pm8550ve_f_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
pm8550ve_g_temp_alarm: pm8550ve_g_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550ve_g_tz>;
status = "disabled";
trips {
pm8550ve_g_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550ve_g_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
pm8550ve_g_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
pm8550ve_i_temp_alarm: pm8550ve_i_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550ve_i_tz>;
status = "disabled";
trips {
pm8550ve_i_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550ve_i_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
pm8550ve_i_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
};