samsung_sm8750/android_kernel_samsung_sm8750-devicetrees
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
ce49bb212205ea109f79fd535c9ba4d057496246
android_kernel_samsung_sm87…/bindings/sde-dp.txt
Varsha Suresh 313d6ad696 ARM: dts: msm: add device tree files for sun target 
Add device tree files required for DPU driver on sun target.
Move bindings for all mdp, dsi, panels, hdcp to opensource project.

Change-Id: I1c6575313e33c5727f48ce94fe8b51cd9c62995d
Signed-off-by: Varsha Suresh <quic_varssure@quicinc.com>
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
2023-11-16 13:51:51 -08:00

298 lines
12 KiB
Plaintext
Raw Blame History

Qualcomm Technologies, Inc.
sde-dp is the master Display Port device which supports DP host controllers that are compatible with VESA Display Port interface specification.
DP Controller: Required properties:
- compatible: Should be "qcom,dp-display".
- reg: Base address and length of DP hardware's memory mapped regions.
- reg-names: A list of strings that name the list of regs. "dp_ctrl" - DP controller memory region.
"dp_ahb" - AHB memory region.
"dp_aux" - AUX memory region.
"dp_link" - LINK memory region.
"dp_p0" - PCLK0 memory region.
"dp_phy" - PHY memory region.
"dp_ln_tx0" - USB3 DP PHY combo TX-0 lane memory region.
"dp_ln_tx1" - USB3 DP PHY combo TX-1 lane memory region.
"dp_mmss_cc" - Display Clock Control memory region.
"dp_pll" - USB3 DP combo PLL memory region.
"usb3_dp_com" - USB3 DP PHY combo memory region.
"hdcp_physical" - DP HDCP memory region.
"dp_p1" - DP PCLK1 memory region.
"gdsc" - DISPCC GDSC memory region.
- cell-index: Specifies the controller instance.
- #clock-cells: Denotes the DP driver as a clock producer (has one or more clock outputs)
- clocks: Clocks required for Display Port operation.
- clock-names: Names of the clocks corresponding to handles. Following clocks are required:
"core_aux_clk", "core_usb_ref_clk_src", "core_usb_pipe_clk", "link_clk",
"link_clk_src", "link_iface_clk", "pixel_clk_rcg", "pixel_parent",
"pixel1_clk_rcg", "strm0_pixel_clk", "strm1_pixel_clk".
- vdda-1p2-supply: phandle to vdda 1.2V regulator node.
- vdda-0p9-supply: phandle to vdda 0.9V regulator node.
- interrupt-parent phandle to the interrupt parent device node.
- interrupts: The interrupt signal from the DSI block.
- qcom,aux-cfg0-settings: Specifies the DP AUX configuration 0 settings. The first
entry in this array corresponds to the register offset
within DP AUX, while the remaining entries indicate the
programmable values.
- qcom,aux-cfg1-settings: Specifies the DP AUX configuration 1 settings. The first
entry in this array corresponds to the register offset
within DP AUX, while the remaining entries indicate the
programmable values.
- qcom,aux-cfg2-settings: Specifies the DP AUX configuration 2 settings. The first
entry in this array corresponds to the register offset
within DP AUX, while the remaining entries indicate the
programmable values.
- qcom,aux-cfg3-settings: Specifies the DP AUX configuration 3 settings. The first
entry in this array corresponds to the register offset
within DP AUX, while the remaining entries indicate the
programmable values.
- qcom,aux-cfg4-settings: Specifies the DP AUX configuration 4 settings. The first
entry in this array corresponds to the register offset
within DP AUX, while the remaining entries indicate the
programmable values.
- qcom,aux-cfg5-settings: Specifies the DP AUX configuration 5 settings. The first
entry in this array corresponds to the register offset
within DP AUX, while the remaining entries indicate the
programmable values.
- qcom,aux-cfg6-settings: Specifies the DP AUX configuration 6 settings. The first
entry in this array corresponds to the register offset
within DP AUX, while the remaining entries indicate the
programmable values.
- qcom,aux-cfg7-settings: Specifies the DP AUX configuration 7 settings. The first
entry in this array corresponds to the register offset
within DP AUX, while the remaining entries indicate the
programmable values.
- qcom,aux-cfg8-settings: Specifies the DP AUX configuration 8 settings. The first
entry in this array corresponds to the register offset
within DP AUX, while the remaining entries indicate the
programmable values.
- qcom,aux-cfg9-settings: Specifies the DP AUX configuration 9 settings. The first
entry in this array corresponds to the register offset
within DP AUX, while the remaining entries indicate the
programmable values.
- qcom,max-pclk-frequency-khz: An integer specifying the max. pixel clock in KHz supported by Display Port.
- qcom,mst-enable: MST feature enable control node.
- qcom,dsc-feature-enable: DSC feature enable control node.
- qcom,fec-feature-enable: FEC feature enable control node.
- qcom,qos-cpu-mask: A u32 value indicating desired PM QoS CPU affine mask
- qcom,qos-cpu-latency-us: A u32 value indicating desired PM QoS CPU latency in usec
- qcom,altmode-dev: Phandle for the AltMode GLink driver.
- usb-controller: Phandle for the USB controller.
- qcom,pll-revision: PLL hardware revision.
- usb-phy: Phandle for USB PHY driver. This is used to register for USB cable events.
- qcom,dsc-continuous-pps: Control node for sending PPS every frame in hardware for DSC over DP.
This is needed by certain bridge chips where there is such a requirement to do so.
- qcom,dp-aux-switch: Phandle for the driver used to program the AUX switch for Display Port orientation.
- qcom,dp-hpd-gpio: HPD gpio for direct DP connector without USB PHY or AUX switch.
- qcom,dp-gpio-aux-switch: Gpio DP AUX switch chipset support.
- qcom,<type>-supply-entries: A node that lists the elements of the supply used by the a particular "type" of DP module. The module "types"
can be "core", "ctrl", "pll" and "phy". Within the same type,
there can be more than one instance of this binding,
in which case the entry would be appended with the
supply entry index.
e.g. qcom,ctrl-supply-entry@0
-- qcom,supply-name: name of the supply (vdd/vdda/vddio)
-- qcom,supply-min-voltage: minimum voltage level (uV)
-- qcom,supply-max-voltage: maximum voltage level (uV)
-- qcom,supply-enable-load: load drawn (uA) from enabled supply
-- qcom,supply-disable-load: load drawn (uA) from disabled supply
-- qcom,supply-pre-on-sleep: time to sleep (ms) before turning on
-- qcom,supply-post-on-sleep: time to sleep (ms) after turning on
-- qcom,supply-pre-off-sleep: time to sleep (ms) before turning off
-- qcom,supply-post-off-sleep: time to sleep (ms) after turning off
msm_ext_disp is a device which manages the interaction between external
display interfaces, e.g. Display Port, and the audio subsystem.
Optional properties:
- clock-mmrm: List of the clocks that enable setting the clk rate through MMRM driver.
The order of the list must match the 'clocks' and 'clock-names'
properties. The 'DISP_CC' ID of the clock must be used to enable
the property for the respective clock, whereas a value of zero
disables the property.
- vdd_mx-supply: phandle to vdda MX regulator node
- qcom,aux-en-gpio: Specifies the aux-channel enable gpio.
- qcom,aux-sel-gpio: Specifies the aux-channel select gpio.
- qcom,usbplug-cc-gpio: Specifies the usbplug orientation gpio.
- qcom,ext-disp: phandle for msm-ext-display module
- compatible: Must be "qcom,msm-ext-disp"
- qcom,dp-low-power-hw-hpd: Low power hardware HPD feature enable control node
- qcom,phy-version: Phy version
- qcom,pn-swap-lane-map: P/N swap configuration of each lane
- pinctrl-names: List of names to assign mdss pin states defined in pinctrl device node
Refer to pinctrl-bindings.txt
- pinctrl-<0..n>: Lists phandles each pointing to the pin configuration node within a pin
controller. These pin configurations are installed in the pinctrl
device node. Refer to pinctrl-bindings.txt
- qcom,max-lclk-frequency-khz: An integer specifying the max. link clock in KHz supported by Display Port.
- qcom,mst-fixed-topology-ports: u32 values of which MST output port to reserve, start from one
- qcom,hbr-rbr-voltage-swing: Specifies the voltage swing levels for HBR and RBR rates.
- qcom,hbr-rbr-pre-emphasis: Specifies the pre-emphasis levels for HBR and RBR rates.
- qcom,hbr2-3-voltage-swing: Specifies the voltage swing levels for HBR2 and HBR3 rates.
- qcom,hbr2-3-pre-emphasis: Specifies the pre-emphasis levels for HBR2 and HBR3 rates.
[Optional child nodes]: These nodes are for devices which are
dependent on msm_ext_disp. If msm_ext_disp is disabled then
these devices will be disabled as well. Ex. Audio Codec device.
- ext_disp_audio_codec: Node for Audio Codec.
- compatible : "qcom,msm-ext-disp-audio-codec-rx";
Example:
ext_disp: qcom,msm-ext-disp {
compatible = "qcom,msm-ext-disp";
ext_disp_audio_codec: qcom,msm-ext-disp-audio-codec-rx {
compatible = "qcom,msm-ext-disp-audio-codec-rx";
};
};
sde_dp: qcom,dp_display@0 {
cell-index = <0>;
compatible = "qcom,dp-display";
qcom,dp-aux-switch = <&fsa4480>;
qcom,ext-disp = <&ext_disp>;
qcom,altmode-dev = <&altmode 0>;
usb-controller = <&usb0>;
reg = <0xae90000 0x0dc>,
<0xae90200 0x0c0>,
<0xae90400 0x508>,
<0xae91000 0x094>,
<0x88eaa00 0x200>,
<0x88ea200 0x200>,
<0x88ea600 0x200>,
<0xaf02000 0x1a0>,
<0x88ea000 0x200>,
<0x88e8000 0x20>,
<0x0aee1000 0x034>,
<0xae91400 0x094>,
<0xaf03000 0x8>;
reg-names = "dp_ahb", "dp_aux", "dp_link",
"dp_p0", "dp_phy", "dp_ln_tx0", "dp_ln_tx1",
"dp_mmss_cc", "dp_pll", "usb3_dp_com",
"hdcp_physical", "dp_p1", "gdsc";
interrupt-parent = <&mdss_mdp>;
interrupts = <12 0>;
#clock-cells = <1>;
clocks = <&clock_dispcc DISP_CC_MDSS_DP_AUX_CLK>,
<&clock_rpmh RPMH_CXO_CLK>,
<&clock_gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
<&clock_dispcc DISP_CC_MDSS_DP_LINK_CLK>,
<&clock_dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
<&clock_dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
<&clock_dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
<&sde_dp DP_PHY_PLL_VCO_DIV_CLK>,
<&clock_dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>,
<&clock_dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
<&clock_dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
clock-names = "core_aux_clk", "core_usb_ref_clk_src",
"core_usb_pipe_clk", "link_clk", "link_clk_src",
"link_iface_clk", "pixel_clk_rcg", "pixel_parent",
"pixel1_clk_rcg", "strm0_pixel_clk", "strm1_pixel_clk";
clock-mmrm = <0 0 0 0 DISP_CC_MDSS_DP_LINK_CLK_SRC 0 0 0 0 0 0>;
qcom,pll-revision = "5nm-v1";
qcom,phy-version = <0x420>;
qcom,dp-aux-switch = <&fsa4480>;
qcom,aux-cfg0-settings = [1c 00];
qcom,aux-cfg1-settings = [20 13 23 1d];
qcom,aux-cfg2-settings = [24 00];
qcom,aux-cfg3-settings = [28 00];
qcom,aux-cfg4-settings = [2c 0a];
qcom,aux-cfg5-settings = [30 26];
qcom,aux-cfg6-settings = [34 0a];
qcom,aux-cfg7-settings = [38 03];
qcom,aux-cfg8-settings = [3c bb];
qcom,aux-cfg9-settings = [40 03];
qcom,max-pclk-frequency-khz = <593470>;
qcom,mst-enable;
qcom,dsc-feature-enable;
qcom,fec-feature-enable;
qcom,dsc-continuous-pps;
qcom,qos-cpu-mask = <0xf>;
qcom,qos-cpu-latency-us = <300>;
vdda-1p2-supply = <&L6B>;
vdda-0p9-supply = <&L1B>;
vdd_mx-supply = <&VDD_MXA_LEVEL>;
qcom,hbr-rbr-voltage-swing = <0x07 0x0f 0x16 0x1f>,
<0x11 0x1e 0x1f 0xff>,
<0x16 0x1f 0xff 0xff>,
<0x1f 0xff 0xff 0xff>;
qcom,hbr-rbr-pre-emphasis = <0x00 0x0d 0x14 0x1a>,
<0x00 0x0e 0x15 0xff>,
<0x00 0x0e 0xff 0xff>,
<0x02 0xff 0xff 0xff>;
qcom,hbr2-3-voltage-swing = <0x02 0x12 0x16 0x1a>,
<0x09 0x19 0x1f 0xff>,
<0x10 0x1f 0xff 0xff>,
<0x1f 0xff 0xff 0xff>;
qcom,hbr2-3-pre-emphasis = <0x00 0x0c 0x15 0x1b>,
<0x02 0x0e 0x16 0xff>,
<0x02 0x11 0xff 0xff>,
<0x04 0xff 0xff 0xff>;
qcom,ctrl-supply-entries {
#address-cells = <1>;
#size-cells = <0>;
qcom,ctrl-supply-entry@0 {
reg = <0>;
qcom,supply-name = "vdda-1p2";
qcom,supply-min-voltage = <1200000>;
qcom,supply-max-voltage = <1200000>;
qcom,supply-enable-load = <21700>;
qcom,supply-disable-load = <0>;
};
};
qcom,phy-supply-entries {
#address-cells = <1>;
#size-cells = <0>;
qcom,phy-supply-entry@0 {
reg = <0>;
qcom,supply-name = "vdda-0p9";
qcom,supply-min-voltage = <912000>;
qcom,supply-max-voltage = <912000>;
qcom,supply-enable-load = <115000>;
qcom,supply-disable-load = <0>;
};
};
qcom,core-supply-entries {
#address-cells = <1>;
#size-cells = <0>;
qcom,core-supply-entry@0 {
reg = <0>;
qcom,supply-name = "refgen";
qcom,supply-min-voltage = <0>;
qcom,supply-max-voltage = <0>;
qcom,supply-enable-load = <0>;
qcom,supply-disable-load = <0>;
};
};
qcom,pll-supply-entries {
#address-cells = <1>;
#size-cells = <0>;
qcom,pll-supply-entry@0 {
reg = <0>;
qcom,supply-name = "vdd_mx";
qcom,supply-min-voltage =
<RPMH_REGULATOR_LEVEL_TURBO>;
qcom,supply-max-voltage =
<RPMH_REGULATOR_LEVEL_MAX>;
qcom,supply-enable-load = <0>;
qcom,supply-disable-load = <0>;
};
};
};
Reference in New Issue View Git Blame Copy Permalink