6d96a9f04b
Set Load on L2F/L3F regulators for NPM mode. Change-Id: I4bca39109e553cfacd32b15235b6f58ce803bb8a Signed-off-by: Hemant Gupta <quic_hemantg@quicinc.com>
106 lines
3.0 KiB
Plaintext
106 lines
3.0 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
|
|
/*
|
|
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <dt-bindings/interconnect/qcom,sun.h>
|
|
|
|
&pm8550vs_f_gpios {
|
|
bt_uwb_en: bt_uwb_en {
|
|
pins = "gpio3";
|
|
function = "normal";
|
|
input-disable;
|
|
output-enable;
|
|
bias-disable;
|
|
power-source = <1>;
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
cnss_bt_sw_ctrl: cnss_wlan_sw_ctrl {
|
|
mux {
|
|
pins = "gpio18";
|
|
function = "wcn_sw_ctrl";
|
|
};
|
|
};
|
|
};
|
|
|
|
&soc {
|
|
bluetooth: bt_kiwi {
|
|
compatible = "qcom,kiwi";
|
|
pinctrl-names = "bt_uwb_en", "sw_ctrl";
|
|
pinctrl-0 = <&bt_uwb_en>;
|
|
pinctrl-1 = <&cnss_bt_sw_ctrl>;
|
|
/* List of GPIOs to be setup for interrupt wakeup capable*/
|
|
mpm_wake_set_gpios = <18>;
|
|
qcom,wl-reset-gpio = <&tlmm 16 0>; /* WL_EN */
|
|
qcom,bt-sw-ctrl-gpio = <&tlmm 18 0>; /* SW_CTRL */
|
|
qcom,bt-reset-gpio = <&pm8550vs_f_gpios 3 0>; /* BT_EN */
|
|
qcom,qmp = <&aoss_qmp>;
|
|
|
|
qcom,bt-vdd18-aon-supply = <&L3F>; /* BT VDD1.8 AON */
|
|
qcom,bt-vdd12-io-supply = <&L2F>; /* BT VDD1.2V IO */
|
|
qcom,bt-ant-ldo-supply = <&L6K>; /* BT ANT - AV91C_VDD */
|
|
qcom,bt-vdd-aon-supply = <&S1D>; /* BT AON LDO*/
|
|
qcom,bt-vdd-rfaOp8-supply = <&S1D>; /* BT RFAOp8 CMN LDO*/
|
|
qcom,bt-vdd-rfa1-supply = <&S7I>; /* BT RFA1.2 LDO */
|
|
qcom,bt-vdd-rfa2-supply = <&S3G>; /* BT RFA1.8 LDO */
|
|
|
|
qcom,bt-vdd18-aon-config = <1800000 1800000 30000 1 0>;
|
|
qcom,bt-vdd12-io-config = <1200000 1200000 30000 1 0>;
|
|
qcom,bt-ant-ldo-config = <1800000 1800000 0 1 0>;
|
|
qcom,bt-vdd-aon-config = <916000 1100000 0 1 0>;
|
|
qcom,bt-vdd-rfaOp8-config = <916000 1100000 0 1 0>;
|
|
qcom,bt-vdd-rfa1-config = <1316000 1340000 0 1 0>;
|
|
qcom,bt-vdd-rfa2-config = <1864000 2000000 0 1 0>;
|
|
|
|
qcom,pdc_init_table =
|
|
"{class: wlan_pdc, ss: rf, res: s3g.v, upval: 1856}",
|
|
"{class: wlan_pdc, ss: rf, res: s3g.v, dwnval: 1844}",
|
|
"{class: wlan_pdc, ss: rf, res: s7i.v, upval: 1316}",
|
|
"{class: wlan_pdc, ss: rf, res: s7i.v, dwnval: 972}",
|
|
"{class: wlan_pdc, ss: rf, res: s1d.m, enable: 1}",
|
|
"{class: wlan_pdc, ss: rf, res: s1d.v, enable: 1}",
|
|
"{class: wlan_pdc, ss: rf, res: s1d.v, upval: 916}",
|
|
"{class: wlan_pdc, ss: rf, res: s1d.v, dwnval: 880}";
|
|
};
|
|
|
|
slim_msm: slim@6C40000 {
|
|
status = "ok";
|
|
ngd@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
//slimbus child nodes
|
|
slimbus: btfmslim-driver {
|
|
compatible = "slim217,221";
|
|
reg = <1 0>;
|
|
qcom,btslim-address = <0x0>; /* BT SLIM EP address*/
|
|
qcom,btslimtx-channels = <159 160>; /* slimbus FM_Tx, SCO_Tx channels */
|
|
qcom,btslimrx-channels = <157 158>; /* slimbus SCO_A2DP_Rx A2DP_Rx */
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
// FM changes
|
|
&qupv3_se5_i2c {
|
|
status = "ok";
|
|
nq@64 {
|
|
compatible = "rtc6226";
|
|
reg = <0x64>;
|
|
fmint-gpio = <&tlmm 84 0>;
|
|
vdd-supply = <&L16B>;
|
|
rtc6226,vdd-supply-voltage = <2800000 2800000>;
|
|
rtc6226,vdd-load = <15000>;
|
|
vio-supply = <&L15B>;
|
|
rtc6226,vio-supply-voltage = <1800000 1800000>;
|
|
};
|
|
};
|
|
|
|
//uart instance
|
|
&qupv3_se14_4uart {
|
|
status = "ok";
|
|
};
|