6f18ce8026
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
33 lines
1.1 KiB
Plaintext
33 lines
1.1 KiB
Plaintext
* Fujitsu SDHCI controller
|
|
|
|
This file documents differences between the core properties in mmc.txt
|
|
and the properties used by the sdhci_f_sdh30 driver.
|
|
|
|
Required properties:
|
|
- compatible: "fujitsu,mb86s70-sdhci-3.0"
|
|
- clocks: Must contain an entry for each entry in clock-names. It is a
|
|
list of phandles and clock-specifier pairs.
|
|
See ../clocks/clock-bindings.txt for details.
|
|
- clock-names: Should contain the following two entries:
|
|
"iface" - clock used for sdhci interface
|
|
"core" - core clock for sdhci controller
|
|
|
|
Optional properties:
|
|
- vqmmc-supply: phandle to the regulator device tree node, mentioned
|
|
as the VCCQ/VDD_IO supply in the eMMC/SD specs.
|
|
- fujitsu,cmd-dat-delay-select: boolean property indicating that this host
|
|
requires the CMD_DAT_DELAY control to be enabled.
|
|
|
|
Example:
|
|
|
|
sdhci1: mmc@36600000 {
|
|
compatible = "fujitsu,mb86s70-sdhci-3.0";
|
|
reg = <0 0x36600000 0x1000>;
|
|
interrupts = <0 172 0x4>,
|
|
<0 173 0x4>;
|
|
bus-width = <4>;
|
|
vqmmc-supply = <&vccq_sdhci1>;
|
|
clocks = <&clock 2 2 0>, <&clock 2 3 0>;
|
|
clock-names = "iface", "core";
|
|
};
|