samsung_sm8750/android_kernel_samsung_sm8750-devicetrees
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
aefa6bb112596e78c3dfcd85bc881a1a0daff12c
android_kernel_samsung_sm87…/qcom/parrot-pmic-overlay.dtsi
Swetha Chikkaboraiah db1d959604 ARM: dts: msm: Add initial device tree for parrot 
Add initial device tree support for parrot  target.
This is a snapshot of dtsi files as of KP.1.0
'commit <3a433cd2ffb4> ("ARM: dts: msm: Add
ext-region prop of cpusysvm for parrot")'.

Change-Id: I582a3d131b94551da5f6d819003ab1a15ecd36f1
Signed-off-by: Swetha Chikkaboraiah <quic_schikk@quicinc.com>
2024-04-11 12:14:38 +05:30

701 lines
14 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pm6450.h>
#define PMR735A_SID 6
#include "pmk8350.dtsi"
#include "pm6450.dtsi"
#include "pm6150l.dtsi"
#include "pmr735a.dtsi"
&soc {
reboot_reason {
compatible = "qcom,reboot-reason";
nvmem-cells = <&restart_reason>;
nvmem-cell-names = "restart_reason";
};
pmic-pon-log {
compatible = "qcom,pmic-pon-log";
nvmem = <&pmk8350_sdam_5>;
nvmem-names = "pon_log";
};
};
&pmk8350 {
/delete-node/ pon_pbs@800;
/delete-node/ pon_hlos@1300;
pon_hlos@1300 {
compatible = "qcom,pm8998-pon";
reg = <0x1300>, <0x800>;
reg-names = "pon_hlos", "pon_pbs";
qcom,log-kpd-event;
pwrkey {
compatible = "qcom,pmk8350-pwrkey";
interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
linux,code = <KEY_POWER>;
};
resin {
compatible = "qcom,pmk8350-resin";
interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
linux,code = <KEY_VOLUMEDOWN>;
};
};
};
&pmk8350_vadc {
pinctrl-names = "default";
pinctrl-0 = <&quiet_therm_default>;
/delete-node/ pm8350_ref_gnd;
/delete-node/ pm8350_vref_1p25;
/delete-node/ pm8350_die_temp;
/delete-node/ pm8350_vph_pwr;
/delete-node/ pm8350b_ref_gnd;
/delete-node/ pm8350b_vref_1p25;
/delete-node/ pm8350b_die_temp;
/delete-node/ pm8350b_vph_pwr;
/delete-node/ pm8350b_vbat_sns;
/delete-node/ pmr735b_ref_gnd;
/delete-node/ pmr735b_vref_1p25;
/delete-node/ pmr735b_die_temp;
/* PM6450 Channel nodes */
pm6450_ref_gnd {
reg = <PM6450_ADC7_REF_GND>;
label = "pm6450_ref_gnd";
qcom,pre-scaling = <1 1>;
};
pm6450_vref_1p25 {
reg = <PM6450_ADC7_1P25VREF>;
label = "pm6450_vref_1p25";
qcom,pre-scaling = <1 1>;
};
pm6450_die_temp {
reg = <PM6450_ADC7_DIE_TEMP>;
label = "pm6450_die_temp";
qcom,pre-scaling = <1 1>;
};
pm6450_quiet_therm {
reg = <PM6450_ADC7_AMUX1_GPIO2_100K_PU>;
label = "pm6450_quiet_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
};
&pmk8350_adc_tm {
io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>,
<&pmk8350_vadc PM6450_ADC7_AMUX1_GPIO2_100K_PU>;
pmk8350_xo_therm {
reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pm6450_quiet_therm {
reg = <PM6450_ADC7_AMUX1_GPIO2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
};
&pmk8350_sdam_23 {
adc_scaling: scaling@bf {
reg = <0xbf 0x1>;
bits = <0 2>;
};
};
&pmk8350_sdam_1 {
ufs_dev: ufs_dev@94 {
reg = <0x94 0x1>;
bits = <0 0>;
};
};
&pm6450_gpios {
key_vol_up {
key_vol_up_default: key_vol_up_default {
pins = "gpio1";
function = "normal";
input-enable;
bias-pull-up;
power-source = <0>;
};
};
quiet_therm {
quiet_therm_default: quiet_therm_default {
pins = "gpio2";
bias-high-impedance;
};
};
pm8010i_reset {
pm8010i_active: pm8010i_active {
pins = "gpio3";
function = "normal";
bias-disable;
output-high;
power-source = <0>;
};
};
pm8010j_reset {
pm8010j_active: pm8010j_active {
pins = "gpio4";
function = "normal";
bias-disable;
output-high;
power-source = <0>;
};
};
};
&pm6150l_revid {
status = "disabled";
};
&pm6150l_4 {
qcom,power-on@800 {
status = "disabled";
};
};
&pm6150l_clkdiv {
clocks = <&rpmhcc RPMH_CXO_CLK>;
};
&pm6150l_vadc {
pinctrl-names = "default";
pinctrl-0 = <&ufs_therm_default &wide_rfc_therm_default>;
pa_therm2 {
reg = <ADC5_AMUX_THM1_100K_PU>;
label = "pa_therm2";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pa_therm1 {
reg = <ADC5_AMUX_THM3_100K_PU>;
label = "pa_therm1";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
ufs_therm {
reg = <ADC5_GPIO1_100K_PU>;
label = "ufs_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
wide_rfc_therm {
reg = <ADC5_GPIO3_100K_PU>;
label = "wide_rfc_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
};
&pm6150l_gpios {
ufs_therm {
ufs_therm_default: ufs_therm_default {
pins = "gpio5";
bias-high-impedance;
};
};
wide_rfc_therm {
wide_rfc_therm_default: wide_rfc_therm_default {
pins = "gpio7";
bias-high-impedance;
};
};
};
&pm6150l_adc_tm {
io-channels = <&pm6150l_vadc ADC5_AMUX_THM1_100K_PU>,
<&pm6150l_vadc ADC5_AMUX_THM3_100K_PU>,
<&pm6150l_vadc ADC5_GPIO1_100K_PU>,
<&pm6150l_vadc ADC5_GPIO3_100K_PU>;
/* Channel nodes */
pa_therm2 {
reg = <ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pa_therm1 {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
ufs_therm {
reg = <ADC5_GPIO1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
wide_rfc_therm {
reg = <ADC5_GPIO3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
};
&flash_led {
status = "ok";
qcom,use-qti-battery-interface;
};
&pmr735a_spmi {
reg = <6 SPMI_USID>;
};
&pmr735a_tz {
interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
io-channels = <&pmk8350_vadc PMR735A_ADC7_DIE_TEMP>;
io-channel-names = "thermal";
};
&thermal_zones {
xo-therm {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM1_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
sys-therm-1 {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm6150l_adc_tm ADC5_GPIO1_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
sys-therm-2 {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm6150l_adc_tm ADC5_GPIO3_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
sys-therm-3 {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8350_adc_tm PM6450_ADC7_AMUX1_GPIO2_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
sys-therm-4 {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm6150l_adc_tm ADC5_AMUX_THM1_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
sys-therm-5 {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm6150l_adc_tm ADC5_AMUX_THM3_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
/*
* Each QUP device that's a parent to PMIC must be listed as a critical device
* to GCC
*/
&gcc {
qcom,critical-devices = <&qupv3_se2_i2c>;
};
&qupv3_se2_i2c {
#address-cells = <1>;
#size-cells = <0>;
status = "ok";
pm8010i@8 {
compatible = "qcom,i2c-pmic";
reg = <0x8>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pm8010i_active>;
pm8010-chip@900 {
reg = <0x900>;
PM8010I_EN: qcom,pm8008-chip-en {
regulator-name = "pm8010i-chip-en";
};
};
qcom,revid@100 {
reg = <0x100>;
};
};
pm8010i@9 {
compatible = "qcom,i2c-pmic";
reg = <0x9>;
#address-cells = <1>;
#size-cells = <0>;
qcom,pm8010i-regulator {
#address-cells = <1>;
#size-cells = <0>;
pm8008_en-supply = <&PM8010I_EN>;
vdd_l1_l2-supply = <&S8B>;
vdd_l3_l4-supply = <&BOB>;
vdd_l5-supply = <&BOB>;
vdd_l6-supply = <&BOB>;
vdd_l7-supply = <&BOB>;
L1I: pm8010i_l1: regulator@4000 {
reg = <0x4000>;
regulator-name = "pm8010i_l1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
qcom,min-dropout-voltage = <88000>;
qcom,hpm-min-load = <30000>;
};
L2I: pm8010i_l2: regulator@4100 {
reg = <0x4100>;
regulator-name = "pm8010i_l2";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1150000>;
qcom,min-dropout-voltage = <64000>;
qcom,hpm-min-load = <30000>;
};
L3I: pm8010i_l3: regulator@4200 {
reg = <0x4200>;
regulator-name = "pm8010i_l3";
regulator-min-microvolt = <1328000>;
regulator-max-microvolt = <3000000>;
qcom,min-dropout-voltage = <176000>;
qcom,hpm-min-load = <0>;
};
L4I: pm8010i_l4: regulator@4300 {
reg = <0x4300>;
regulator-name = "pm8010i_l4";
regulator-min-microvolt = <1376000>;
regulator-max-microvolt = <2900000>;
qcom,min-dropout-voltage = <128000>;
qcom,hpm-min-load = <0>;
};
L6I: pm8010i_l6: regulator@4500 {
reg = <0x4500>;
regulator-name = "pm8010i_l6";
regulator-min-microvolt = <1376000>;
regulator-max-microvolt = <2900000>;
qcom,min-dropout-voltage = <128000>;
qcom,hpm-min-load = <0>;
};
L7I: pm8010i_l7: regulator@4600 {
reg = <0x4600>;
regulator-name = "pm8010i_l7";
regulator-min-microvolt = <1248000>;
regulator-max-microvolt = <3000000>;
qcom,min-dropout-voltage = <256000>;
qcom,hpm-min-load = <0>;
};
};
};
pm8010j@c {
compatible = "qcom,i2c-pmic";
reg = <0xc>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pm8010j_active>;
pm8010-chip@900 {
reg = <0x900>;
PM8010J_EN: qcom,pm8008-chip-en {
regulator-name = "pm8010j-chip-en";
};
};
qcom,revid@100 {
reg = <0x100>;
};
};
pm8010j@d {
compatible = "qcom,i2c-pmic";
reg = <0xd>;
#address-cells = <1>;
#size-cells = <0>;
qcom,pm8010j-regulator {
#address-cells = <1>;
#size-cells = <0>;
pm8008_en-supply = <&PM8010J_EN>;
vdd_l1_l2-supply = <&S8B>;
vdd_l3_l4-supply = <&S8E>;
vdd_l5-supply = <&BOB>;
vdd_l6-supply = <&BOB>;
vdd_l7-supply = <&BOB>;
L1J: pm8010j_l1: regulator@4000 {
reg = <0x4000>;
regulator-name = "pm8010j_l1";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1150000>;
qcom,min-dropout-voltage = <48000>;
qcom,hpm-min-load = <30000>;
};
L3J: pm8010j_l3: regulator@4200 {
reg = <0x4200>;
regulator-name = "pm8010j_l3";
regulator-min-microvolt = <1744000>;
regulator-max-microvolt = <1900000>;
qcom,min-dropout-voltage = <72000>;
qcom,hpm-min-load = <0>;
};
L4J: pm8010j_l4: regulator@4300 {
reg = <0x4300>;
regulator-name = "pm8010j_l4";
regulator-min-microvolt = <1664000>;
regulator-max-microvolt = <1888000>;
qcom,min-dropout-voltage = <152000>;
qcom,hpm-min-load = <0>;
};
L6J: pm8010j_l6: regulator@4500 {
reg = <0x4500>;
regulator-name = "pm8010j_l6";
regulator-min-microvolt = <1376000>;
regulator-max-microvolt = <2900000>;
qcom,min-dropout-voltage = <128000>;
qcom,hpm-min-load = <0>;
};
};
};
};
&soc {
display_panel_vddio: display_gpio_regulator@1 {
compatible = "qti-regulator-fixed";
regulator-name = "display_panel_vddio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-enable-ramp-delay = <233>;
gpio = <&pm6150l_gpios 9 0>;
enable-active-high;
regulator-boot-on;
proxy-supply = <&display_panel_vddio>;
qcom,proxy-consumer-enable;
pinctrl-names = "default";
pinctrl-0 = <&display_panel_vddio_default>;
};
display_panel_avdd: display_gpio_regulator@2 {
compatible = "qti-regulator-fixed";
regulator-name = "display_panel_avdd";
regulator-min-microvolt = <5500000>;
regulator-max-microvolt = <5500000>;
regulator-enable-ramp-delay = <233>;
gpio = <&pm6150l_gpios 4 0>;
enable-active-high;
regulator-boot-on;
proxy-supply = <&display_panel_avdd>;
qcom,proxy-consumer-enable;
pinctrl-names = "default";
pinctrl-0 = <&display_panel_avdd_default>;
};
display_panel_extvdd: display_gpio_regulator@3 {
compatible = "qti-regulator-fixed";
regulator-name = "display_panel_extvdd";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-enable-ramp-delay = <233>;
gpio = <&pm6150l_gpios 3 0>;
enable-active-high;
regulator-boot-on;
proxy-supply = <&display_panel_extvdd>;
qcom,proxy-consumer-enable;
pinctrl-names = "default";
pinctrl-0 = <&display_panel_extvdd_default>;
};
display_panel_ibb: display_panel_ibb_stub {
compatible = "qcom,stub-regulator";
regulator-name = "display_panel_ibb";
regulator-min-microvolt = <4600000>;
regulator-max-microvolt = <6000000>;
};
};
&pm6150l_gpios {
display_panel_supply_ctrl {
display_panel_vddio_default: display_panel_vddio_default {
pins = "gpio9";
function = "normal";
input-disable;
output-enable;
bias-disable;
power-source = <0>;
qcom,drive-strength = <2>;
};
display_panel_avdd_default: display_panel_avdd_default {
pins = "gpio4";
function = "normal";
input-disable;
output-enable;
bias-disable;
power-source = <0>;
qcom,drive-strength = <2>;
};
display_panel_extvdd_default: display_panel_extvdd_default {
pins = "gpio3";
function = "normal";
input-disable;
output-enable;
bias-disable;
power-source = <0>;
qcom,drive-strength = <2>;
};
};
lcd_backlight_ctrl {
lcd_backlight_en_default: lcd_backlight_en_default {
pins = "gpio10";
function = "normal";
input-disable;
output-enable;
bias-disable;
power-source = <0>;
qcom,drive-strength = <2>;
};
};
};
&pm6450_gpios {
lcd_backlight_ctrl {
lcd_backlight_pwm_default: lcd_backlight_pwm_default {
pins = "gpio7";
function = "func1";
input-disable;
output-enable;
bias-disable;
power-source = <1>; /* 1.8V */
qcom,drive-strength = <2>;
};
};
};
Reference in New Issue View Git Blame Copy Permalink