Files
android_kernel_samsung_sm87…/qcom/pm8550ve.dtsi
David Collins e13ba0f783 ARM: dts: qcom: add PMIC PM8550VE_F and its peripherals for Sun boards
Add a PMIC PM8550VE_F device along with its peripheral device
subnodes.  This PMIC is found on Sun boards that use the V8
power grid instead of PMIC PM8550VS_F.

Change-Id: Idf4de30a6ceb891f563341bad0e0da21dca38b69
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
2023-11-27 17:28:54 -08:00

225 lines
4.6 KiB
Plaintext

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
pm8550ve_d: qcom,pm8550ve@3 {
compatible = "qcom,spmi-pmic";
reg = <0x3 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550ve_d_tz: pm8550ve-d-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550ve_d_gpios: pinctrl@8800 {
compatible = "qcom,pm8550ve-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550ve_f: qcom,pm8550ve@5 {
compatible = "qcom,spmi-pmic";
reg = <0x5 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550ve_f_tz: pm8550ve-f-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550ve_f_gpios: pinctrl@8800 {
compatible = "qcom,pm8550ve-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550ve_g: qcom,pm8550ve@6 {
compatible = "qcom,spmi-pmic";
reg = <0x6 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550ve_g_tz: pm8550ve-g-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550ve_g_gpios: pinctrl@8800 {
compatible = "qcom,pm8550ve-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550ve_i: qcom,pm8550ve@8 {
compatible = "qcom,spmi-pmic";
reg = <0x8 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550ve_i_tz: pm8550ve-i-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x8 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550ve_i_gpios: pinctrl@8800 {
compatible = "qcom,pm8550ve-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
&thermal_zones {
pm8550ve_d_temp_alarm: pm8550ve_d_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550ve_d_tz>;
status = "disabled";
trips {
pm8550ve_d_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550ve_d_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "passive";
};
pm8550ve_d_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
pm8550ve_f_temp_alarm: pm8550ve_f_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550ve_f_tz>;
status = "disabled";
trips {
pm8550ve_f_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550ve_f_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "passive";
};
pm8550ve_f_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
pm8550ve_g_temp_alarm: pm8550ve_g_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550ve_g_tz>;
status = "disabled";
trips {
pm8550ve_g_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550ve_g_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "passive";
};
pm8550ve_g_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
pm8550ve_i_temp_alarm: pm8550ve_i_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550ve_i_tz>;
status = "disabled";
trips {
pm8550ve_i_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550ve_i_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "passive";
};
pm8550ve_i_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
};