samsung_sm8750/android_kernel_samsung_sm8750-devicetrees
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
a1378b76f00ab00c73d0c2e0e1ff1ac22a79305c
android_kernel_samsung_sm87…/sun-camera-sensor-hdk.dtsi
Pengfei Liu c0a392f343 ARM: dts: msm: hdk rotate 180 degree for rear camera 
- HDK roll 180 degree compare to mtp/qrd.
- Change dtsi roll degree of hdk.

CRs-Fixed: 3979998
Change-Id: I2f067dcf135443a04881257f840bf2ee87298473
Signed-off-by: Pengfei Liu <quic_penliu@quicinc.com>
(cherry picked from commit a49bf9e65a06b310396786c879737759683f1bef)
2024-12-17 19:21:07 -08:00

783 lines
23 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/msm-camera.h>
&soc {
led_flash_triple_rear_wide: qcom,camera-flash1 {
cell-index = <1>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
led_flash_triple_rear_tele: qcom,camera-flash2 {
cell-index = <2>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
led_flash_triple_rear_ultrawide: qcom,camera-flash3 {
cell-index = <3>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
led_flash_asc_rear: qcom,camera-flash4 {
cell-index = <4>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
led_flash_rear_aux: qcom,camera-flash5 {
cell-index = <5>;
compatible = "qcom,camera-flash";
flash-source = <&pm8550_flash0 &pm8550_flash1>;
torch-source = <&pm8550_torch0 &pm8550_torch1>;
switch-source = <&pm8550_switch2>;
status = "ok";
};
qcom,cam-res-mgr {
compatible = "qcom,cam-res-mgr";
status = "ok";
};
};
&cam_cci0 {
actuator_triple_wide: qcom,actuator2 {
cell-index = <2>;
compatible = "qcom,actuator";
cci-master = <CCI_MASTER_1>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <119000>;
status = "ok";
};
actuator_rear_aux: qcom,actuator8 {
cell-index = <8>;
compatible = "qcom,actuator";
cci-master = <CCI_MASTER_0>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <100000>;
status = "ok";
};
ois_wide: qcom,ois0 {
cell-index = <2>;
compatible = "qcom,ois";
cci-master = <CCI_MASTER_1>;
cam_vio-supply = <&L5M>;
cam_vaf-supply = <&L7M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
regulator-names = "cam_vio","cam_vaf", "cam_clk";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2960000 0>;
rgltr-max-voltage = <1800000 2960000 0>;
rgltr-load-current = <4000 220000 0>;
status = "ok";
};
eeprom_tof1: qcom,eeprom7 {
cell-index = <7>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&S7I>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L5N>;
cam_v_custom1-supply = <&L7N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig",
"cam_clk", "cam_vana", "cam_v_custom1", "cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1256000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1340000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 89 0>,
<&tlmm 13 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
eeprom_rear_aux: qcom,eeprom8 {
cell-index = <8>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_vaf-supply = <&L7M>;
cam_v_custom1-supply = <&L6M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 2800000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 2800000>;
rgltr-load-current = <6400 850000 0 114500 100000 140000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 89 0>,
<&tlmm 13 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
eeprom_wide: qcom,eeprom2 {
cell-index = <2>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L6M>;
cam_vaf-supply = <&L7M>;
cam_v_custom1-supply = <&L3N>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
rgltr-load-current = <4000 913000 0 91400 119000 63100>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_active
&cam_sensor_active_rst1>;
pinctrl-1 = <&cam_sensor_mclk1_suspend
&cam_sensor_suspend_rst1>;
gpios = <&tlmm 90 0>,
<&tlmm 15 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET1";
cci-master = <CCI_MASTER_1>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK1_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor7 {
cell-index = <7>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <0>;
eeprom-src = <&eeprom_tof1>;
sensor-position-roll = <270>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&S7I>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L5N>;
cam_v_custom1-supply = <&L7N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig",
"cam_clk", "cam_vana", "cam_v_custom1", "cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1256000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1340000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 89 0>,
<&tlmm 13 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor2 {
cell-index = <2>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <1>;
sensor-position-roll = <270>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_wide>;
ois-src = <&ois_wide>;
actuator-src = <&actuator_triple_wide>;
led-flash-src = <&led_flash_triple_rear_wide>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L6M>;
cam_vaf-supply = <&L7M>;
cam_v_custom1-supply = <&L3N>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
rgltr-load-current = <4000 913000 0 91400 119000 63100>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_active
&cam_sensor_active_rst1>;
pinctrl-1 = <&cam_sensor_mclk1_suspend
&cam_sensor_suspend_rst1>;
gpios = <&tlmm 90 0>,
<&tlmm 15 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET1";
cci-master = <CCI_MASTER_1>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK1_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor8 {
cell-index = <8>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <0>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_rear_aux>;
actuator-src = <&actuator_rear_aux>;
led-flash-src = <&led_flash_rear_aux>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_vaf-supply = <&L7M>;
cam_v_custom1-supply = <&L6M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_vaf", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 2800000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 2800000>;
rgltr-load-current = <6400 850000 0 114500 100000 140000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 89 0>,
<&tlmm 13 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
&cam_cci1 {
actuator_triple_tele: qcom,actuator3{
cell-index = <3>;
compatible = "qcom,actuator";
cci-master = <CCI_MASTER_0>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <100000>;
status = "ok";
};
eeprom_tele: qcom,eeprom3 {
cell-index = <3>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L2M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L4M>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk",
"cam_vana", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-max-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-load-current = <4000 260700 0 67700 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk3_active
&cam_sensor_active_rst3>;
pinctrl-1 = <&cam_sensor_mclk3_suspend
&cam_sensor_suspend_rst3>;
gpios = <&tlmm 92 0>,
<&tlmm 109 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK3",
"CAM_RESET3";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK3_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor3 {
cell-index = <3>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <3>;
sensor-position-roll = <270>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_tele>;
actuator-src = <&actuator_triple_tele>;
led-flash-src = <&led_flash_triple_rear_tele>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L2M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L4M>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk",
"cam_vana", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-max-voltage = <1800000 1056000 0 2800000 2960000>;
rgltr-load-current = <4000 260700 0 67700 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk3_active
&cam_sensor_active_rst3>;
pinctrl-1 = <&cam_sensor_mclk3_suspend
&cam_sensor_suspend_rst3>;
gpios = <&tlmm 92 0>,
<&tlmm 109 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK3",
"CAM_RESET3";
cci-master = <CCI_MASTER_0>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK3_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
&cam_cci2 {
eeprom_tof2: qcom,eeprom5 {
cell-index = <5>;
compatible = "qcom,eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&S7I>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L5N>;
cam_v_custom1-supply = <&L7N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_v_custom1", "cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1256000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1340000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk5_active
&cam_sensor_active_rst5>;
pinctrl-1 = <&cam_sensor_mclk5_suspend
&cam_sensor_suspend_rst5>;
gpios = <&tlmm 94 0>,
<&tlmm 110 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK5",
"CAM_RESET5";
cci-master = <CCI_MASTER_1>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK5_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor5 {
cell-index = <5>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <5>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_tof2>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&S7I>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L5N>;
cam_v_custom1-supply = <&L7N>;
cam_v_custom2-supply = <&DBO3>;
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
"cam_v_custom1", "cam_v_custom2";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1256000 0 2800000 3304000 3600000>;
rgltr-max-voltage = <1800000 1340000 0 2800000 3304000 3600000>;
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk5_active
&cam_sensor_active_rst5>;
pinctrl-1 = <&cam_sensor_mclk5_suspend
&cam_sensor_suspend_rst5>;
gpios = <&tlmm 94 0>,
<&tlmm 110 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK5",
"CAM_RESET5";
cci-master = <CCI_MASTER_1>;
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK5_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
&qupv3_se9_i2c {
status = "ok";
qcom,high-perf;
qcom,clk-freq-out = <1000000>;
qcom,pm-ctrl-client;
eeprom_asc_front: qcom,eeprom1 {
cell-index = <4>;
reg = <0x58>;
compatible = "qcom,cam-i2c-eeprom";
cam_vio-supply = <&L1I>;
cam_vdig-supply = <&L2N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L6N>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana";
rgltr-cntrl-support;
rgltr-min-voltage = <1200000 1104000 0 2800000>;
rgltr-max-voltage = <1200000 1104000 0 2800000>;
rgltr-load-current = <3000 283000 0 50000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk4_active
&cam_sensor_active_rst4>;
pinctrl-1 = <&cam_sensor_mclk4_suspend
&cam_sensor_suspend_rst4>;
gpios = <&tlmm 93 0>,
<&tlmm 7 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK4",
"CAM_RESET4";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK4_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor1 {
cell-index = <4>;
reg = <0x22>;
compatible = "qcom,cam-i2c-sensor";
csiphy-sd-index = <4>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <0>;
eeprom-src = <&eeprom_asc_front>;
cam_vio-supply = <&L1I>;
cam_vdig-supply = <&L2N>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L6N>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana";
rgltr-cntrl-support;
aon-camera-id = <AON_CAM1>;
rgltr-min-voltage = <1200000 1104000 0 2800000>;
rgltr-max-voltage = <1200000 1104000 0 2800000>;
rgltr-load-current = <3000 283000 0 50000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk4_active
&cam_sensor_active_rst4>;
pinctrl-1 = <&cam_sensor_mclk4_suspend
&cam_sensor_suspend_rst4>;
gpios = <&tlmm 93 0>,
<&tlmm 7 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK4",
"CAM_RESET4";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK4_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
&i3c3 {
se-clock-frequency = <64000000>;
i3c-scl-hz = <8300000>;
dfs-index = <0>;
i2c-scl-hz = <1000000>;
qcom,pm-ctrl-client;
status = "ok";
actuator_UW_asc_rear: qcom,actuator@c {
cell-index = <1>;
compatible = "qcom,cam-i2c-actuator";
reg = <0x0C 0x00 0x10>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2960000>;
rgltr-max-voltage = <2960000>;
rgltr-load-current = <100000>;
status = "ok";
};
eeprom_asc_rear: qcom,eeprom@50 {
cell-index = <6>;
reg = <0x50 0x00 0x10>;
compatible = "qcom,cam-i2c-eeprom";
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_v_custom1-supply = <&L4N>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
"cam_v_custom1", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
rgltr-load-current = <6000 454000 0 77900 29400 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2>;
gpios = <&tlmm 91 0>,
<&tlmm 3 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
eeprom_i3c_UltraWide: qcom,eeprom@52 {
cell-index = <1>;
reg = <0x52 0x00 0x10>;
compatible = "qcom,cam-i2c-eeprom";
cam_vio-supply = <&L1I>;
cam_vdig-supply = <&L1M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
"cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1200000 1104000 0 2800000 2960000>;
rgltr-max-voltage = <1200000 1104000 0 2800000 2960000>;
rgltr-load-current = <3000 355000 0 95000 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2>;
gpios = <&tlmm 91 0>,
<&tlmm 3 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor@33,36008580000 {
cell-index = <1>;
reg = <0x33 0x360 0x08580000>;
assigned-address = <0xa>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <2>;
sensor-position-roll = <270>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_i3c_UltraWide>;
actuator-src = <&actuator_UW_asc_rear>;
led-flash-src = <&led_flash_triple_rear_ultrawide>;
cam_vio-supply = <&L1I>;
cam_vdig-supply = <&L1M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
"cam_vaf";
rgltr-cntrl-support;
aon-camera-id = <AON_CAM2>;
i3c-target;
rgltr-min-voltage = <1200000 1104000 0 2800000 2960000>;
rgltr-max-voltage = <1200000 1104000 0 2800000 2960000>;
rgltr-load-current = <3000 355000 0 95000 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2
&cam_sensor_i3cSelect_active>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2
&cam_sensor_i3cSelect_suspend>;
gpios = <&tlmm 91 0>,
<&tlmm 3 0>,
<&tlmm 6 0>;
gpio-reset = <1>;
gpio-custom1 = <2>;
gpio-req-tbl-num = <0 1 2>;
gpio-req-tbl-flags = <1 0 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2",
"CAM_I3CSELECT";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
qcom,cam-sensor@10 {
cell-index = <6>;
reg = <0x10 0x00 0x10>;
compatible = "qcom,cam-i2c-sensor";
csiphy-sd-index = <2>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_asc_rear>;
actuator-src = <&actuator_UW_asc_rear>;
led-flash-src = <&led_flash_asc_rear>;
cam_vio-supply = <&L5M>;
cam_vdig-supply = <&L1M>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&L3M>;
cam_v_custom1-supply = <&L4N>;
cam_vaf-supply = <&L7M>;
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
"cam_v_custom1", "cam_vaf";
rgltr-cntrl-support;
aon-camera-id = <AON_CAM2>;
rgltr-min-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
rgltr-max-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
rgltr-load-current = <6000 454000 0 77900 29400 100000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2
&cam_sensor_ponv_rear_active>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2
&cam_sensor_ponv_rear_suspend>;
gpios = <&tlmm 91 0>,
<&tlmm 3 0>,
<&tlmm 2 0>;
gpio-reset = <1>;
gpio-standby = <2>;
gpio-req-tbl-num = <0 1 2>;
gpio-req-tbl-flags = <1 0 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2",
"CAM_STANDBY";
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
status = "ok";
};
};
Reference in New Issue View Git Blame Copy Permalink