samsung_sm8750/android_kernel_samsung_sm8750-devicetrees
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
8051a5e42c921ade783ccf7d975c38fdac9d8b7a
android_kernel_samsung_sm87…/lahaina-camera-sensor-mtp.dtsi
Soumen Ghosh b8a4592a1b ARM: dts: msm: Add devicetree changes for opensource project 
This chane will migragate all dts and dtsi file to
opensourse project

CRs-Fixed: 3583121
Change-Id: I837ee52ce68ad23fd5bff8ed69684824c9bfe3f4
Signed-off-by: Soumen Ghosh <quic_soumeng@quicinc.com>
2023-09-07 15:42:37 -07:00

752 lines
22 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/clock/qcom,camcc-lahaina.h>
&soc {
led_flash_triple_rear: qcom,camera-flash@4 {
cell-index = <4>;
compatible = "qcom,camera-flash";
flash-source = <&pm8350c_flash0 &pm8350c_flash1>;
torch-source = <&pm8350c_torch0 &pm8350c_torch1>;
switch-source = <&pm8350c_switch2>;
status = "ok";
};
led_flash_triple_rear_aux: qcom,camera-flash@5 {
cell-index = <5>;
compatible = "qcom,camera-flash";
flash-source = <&pm8350c_flash0 &pm8350c_flash1>;
torch-source = <&pm8350c_torch0 &pm8350c_torch1>;
switch-source = <&pm8350c_switch2>;
status = "ok";
};
led_flash_triple_rear_aux2: qcom,camera-flash@6 {
cell-index = <6>;
compatible = "qcom,camera-flash";
flash-source = <&pm8350c_flash0 &pm8350c_flash1>;
torch-source = <&pm8350c_torch0 &pm8350c_torch1>;
switch-source = <&pm8350c_switch2>;
status = "ok";
};
qcom,cam-res-mgr {
compatible = "qcom,cam-res-mgr";
status = "ok";
};
};
&cam_cci0 {
ois0: qcom,ois0 {
cell-index = <0>;
compatible = "qcom,ois";
cci-master = <0>;
cam_vaf-supply = <&pm8008i_l7>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2700000>;
rgltr-max-voltage = <3000000>;
rgltr-load-current = <103000>;
};
actuator_triple_tele: qcom,actuator0 {
cell-index = <0>;
compatible = "qcom,actuator";
cci-master = <0>;
cam_vaf-supply = <&pm8008i_l7>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2700000>;
rgltr-max-voltage = <3000000>;
rgltr-load-current = <103000>;
};
actuator_triple_wide: qcom,actuator1 {
cell-index = <1>;
compatible = "qcom,actuator";
cci-master = <1>;
cam_vaf-supply = <&pm8008i_l7>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2700000>;
rgltr-max-voltage = <3000000>;
rgltr-load-current = <103000>;
};
eeprom_triple_tele: qcom,eeprom0 {
cell-index = <0>;
compatible = "qcom,eeprom";
cam_vio-supply = <&pm8008j_l3>;
cam_vana-supply = <&pm8008i_l4>;
cam_v_custom1-supply = <&pm8008i_l5>;
cam_vdig-supply = <&pm8008i_l2>;
cam_v_custom2-supply = <&pm8008i_l1>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vaf-supply = <&pm8008i_l7>;
regulator-names = "cam_vio", "cam_vana", "cam_v_custom1",
"cam_vdig", "cam_v_custom2", "cam_clk", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2700000 1700000 950000 1000000 0
2700000>;
rgltr-max-voltage = <1800000 2900000 1900000 1150000 1200000 0
3000000>;
rgltr-load-current = <15000 52000 72000 140000 250000 0 103000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 100 0>,
<&tlmm 17 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <0>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
eeprom_triple_wide: qcom,eeprom1 {
cell-index = <1>;
compatible = "qcom,eeprom";
cam_vio-supply = <&pm8008j_l3>;
cam_vana-supply = <&pm8008i_l3>;
cam_vana1-supply = <&pm8008i_l5>;
cam_vdig-supply = <&pm8008i_l1>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vaf-supply = <&pm8008i_l7>;
regulator-names = "cam_vio", "cam_vana", "cam_vana1",
"cam_vdig", "cam_clk", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2700000 1700000 1000000 0 2700000>;
rgltr-max-voltage = <1800000 3000000 1900000 1200000 0 3000000>;
rgltr-load-current = <5000 68000 74000 805000 0 103000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_active
&cam_sensor_active_rst1>;
pinctrl-1 = <&cam_sensor_mclk1_suspend
&cam_sensor_suspend_rst1>;
gpios = <&tlmm 101 0>,
<&tlmm 16 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET1";
cci-master = <1>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
eeprom_tof2: qcom,eeprom3 {
cell-index = <3>;
compatible = "qcom,eeprom";
cam_vio-supply = <&pm8008j_l3>;
cam_vdig-supply = <&pm8350_s12>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&pm8008j_l6>;
cam_v_custom1-supply = <&pm8008j_l7>;
regulator-names = "cam_vio", "cam_vdig",
"cam_clk", "cam_vana", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1170000 0 2800000 3000000>;
rgltr-max-voltage = <1800000 2040000 0 2800000 3600000>;
rgltr-load-current = <200000 680000 0 50000 29000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk3_active
&cam_sensor_active_rst3>;
pinctrl-1 = <&cam_sensor_mclk3_suspend
&cam_sensor_suspend_rst3>;
gpios = <&tlmm 103 0>,
<&tlmm 117 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK3",
"CAM_RESET3";
cci-master = <0>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
eeprom_ext_rgb0: qcom,eeprom7 {
cell-index = <8>;
compatible = "qcom,eeprom";
cam_vio-supply = <&pm8008j_l3>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
regulator-names = "cam_vio", "cam_clk";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 0>;
rgltr-max-voltage = <1800000 0>;
rgltr-load-current = <10000 0>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk3_active
&cam_sensor_active_rst3
&cam_sensor_active_ext_regs0>;
pinctrl-1 = <&cam_sensor_mclk3_suspend
&cam_sensor_suspend_rst3
&cam_sensor_suspend_ext_regs0>;
gpios = <&tlmm 105 0>,
<&tlmm 115 0>,
<&tlmm 28 0>;
gpio-reset = <1>;
gpio-custom1 = <2>;
gpio-req-tbl-num = <0 1 2>;
gpio-req-tbl-flags = <1 0 0>;
gpio-req-tbl-label = "CAMIF_MCLK3",
"CAM_RESET3",
"CAM_EXT_REGS0";
cci-master = <0>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
qcom,cam-sensor0 {
cell-index = <5>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <0>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_triple_tele>;
actuator-src = <&actuator_triple_tele>;
led-flash-src = <&led_flash_triple_rear_aux>;
cam_vio-supply = <&pm8008j_l3>;
cam_vana-supply = <&pm8008i_l4>;
cam_vdig-supply = <&pm8008i_l2>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_bob-supply = <&pm8350c_bob>;
regulator-names = "cam_vio", "cam_vana", "cam_vdig",
"cam_clk", "cam_bob";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2700000 950000 0 3200000>;
rgltr-max-voltage = <1800000 2900000 1150000 0 3960000>;
rgltr-load-current = <10000 52000 140000 0 2000000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 100 0>,
<&tlmm 17 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <0>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
qcom,cam-sensor1 {
cell-index = <4>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <1>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
actuator-src = <&actuator_triple_wide>;
eeprom-src = <&eeprom_triple_wide>;
led-flash-src = <&led_flash_triple_rear>;
cam_vio-supply = <&pm8008j_l3>;
cam_vana-supply = <&pm8008i_l3>;
cam_v_custom1-supply = <&pm8008i_l5>;
cam_vdig-supply = <&pm8008i_l1>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_bob-supply = <&pm8350c_bob>;
regulator-names = "cam_vio", "cam_vana", "cam_v_custom1",
"cam_vdig","cam_clk", "cam_bob";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2700000 1700000 1000000 0 3200000>;
rgltr-max-voltage = <1800000 3000000 1900000 1200000 0 3960000>;
rgltr-load-current = <5000 68000 74000 805000 0 2000000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_active
&cam_sensor_active_rst1>;
pinctrl-1 = <&cam_sensor_mclk1_suspend
&cam_sensor_suspend_rst1>;
gpios = <&tlmm 101 0>,
<&tlmm 16 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET1";
cci-master = <1>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
qcom,cam-sensor3 {
cell-index = <7>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <3>;
eeprom-src = <&eeprom_tof2>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
cam_vio-supply = <&pm8008j_l3>;
cam_vdig-supply = <&pm8350_s12>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vana-supply = <&pm8008j_l6>;
cam_v_custom1-supply = <&pm8008j_l7>;
regulator-names = "cam_vio", "cam_vdig",
"cam_clk", "cam_vana", "cam_v_custom1";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 1170000 0 2800000 3000000>;
rgltr-max-voltage = <1800000 2040000 0 2800000 3600000>;
rgltr-load-current = <200000 680000 0 50000 29000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk3_active
&cam_sensor_active_rst3>;
pinctrl-1 = <&cam_sensor_mclk3_suspend
&cam_sensor_suspend_rst3>;
gpios = <&tlmm 103 0>,
<&tlmm 117 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK3",
"CAM_RESET3";
cci-master = <0>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
qcom,cam-sensor6 {
cell-index = <0>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <0>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
ois-src = <&ois0>;
eeprom-src = <&eeprom_triple_tele>;
actuator-src = <&actuator_triple_tele>;
led-flash-src = <&led_flash_triple_rear_aux>;
cam_vio-supply = <&pm8008j_l3>;
cam_vana-supply = <&pm8008i_l4>;
cam_v_custom1-supply = <&pm8008i_l5>;
cam_vdig-supply = <&pm8008i_l2>;
cam_v_custom2-supply = <&pm8008i_l1>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_bob-supply = <&pm8350c_bob>;
regulator-names = "cam_vio", "cam_vana", "cam_v_custom1",
"cam_vdig", "cam_v_custom2","cam_clk", "cam_bob";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2700000 1700000 950000 1000000 0
3200000>;
rgltr-max-voltage = <1800000 2900000 1900000 1150000 1200000 0
3960000>;
rgltr-load-current = <15000 52000 72000 140000 250000 0
2000000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active
&cam_sensor_active_rst0>;
pinctrl-1 = <&cam_sensor_mclk0_suspend
&cam_sensor_suspend_rst0>;
gpios = <&tlmm 100 0>,
<&tlmm 17 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
cci-master = <0>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
qcom,cam-sensor7 {
cell-index = <8>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <3>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_ext_rgb0>;
actuator-src = <&actuator_triple_tele>;
led-flash-src = <&led_flash_triple_rear_aux>;
cam_vio-supply = <&pm8008j_l3>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
regulator-names = "cam_vio", "cam_clk";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 0>;
rgltr-max-voltage = <1800000 0>;
rgltr-load-current = <10000 0>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk3_active
&cam_sensor_active_rst3
&cam_sensor_active_ext_regs0>;
pinctrl-1 = <&cam_sensor_mclk3_suspend
&cam_sensor_suspend_rst3
&cam_sensor_suspend_ext_regs0>;
gpios = <&tlmm 103 0>,
<&tlmm 117 0>,
<&tlmm 28 0>;
gpio-reset = <1>;
gpio-custom1 = <2>;
gpio-req-tbl-num = <0 1 2>;
gpio-req-tbl-flags = <1 0 0>;
gpio-req-tbl-label = "CAMIF_MCLK3",
"CAM_RESET3",
"CAM_EXT_REGS0";
cci-master = <0>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
};
&cam_cci1 {
actuator_triple_uw: qcom,actuator2 {
cell-index = <2>;
compatible = "qcom,actuator";
cci-master = <0>;
cam_vaf-supply = <&pm8008i_l7>;
regulator-names = "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <2700000>;
rgltr-max-voltage = <3000000>;
rgltr-load-current = <103000>;
};
eeprom_triple_uw: qcom,eeprom2 {
cell-index = <2>;
compatible = "qcom,eeprom";
cam_vio-supply = <&pm8008j_l3>;
cam_vana-supply = <&pm8008i_l6>;
cam_vdig-supply = <&pm8008i_l2>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_vaf-supply = <&pm8008i_l7>;
regulator-names = "cam_vio", "cam_vana", "cam_vdig",
"cam_clk", "cam_vaf";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2700000 950000 0 2700000>;
rgltr-max-voltage = <1800000 2900000 1150000 0 3000000>;
rgltr-load-current = <3000 52000 257000 0 103000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2>;
gpios = <&tlmm 102 0>,
<&tlmm 106 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
cci-master = <0>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
eeprom_tof1: qcom,eeprom4 {
cell-index = <4>;
compatible = "qcom,eeprom";
cam_vio-supply = <&pm8008j_l3>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
regulator-names = "cam_vio", "cam_clk";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 0>;
rgltr-max-voltage = <1800000 0>;
rgltr-load-current = <185000 0>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk4_active
&cam_sensor_active_rst4>;
pinctrl-1 = <&cam_sensor_mclk4_suspend
&cam_sensor_suspend_rst4>;
gpios = <&tlmm 104 0>,
<&tlmm 116 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK4",
"CAM_RESET4";
cci-master = <1>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK4_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
eeprom_front: qcom,eeprom5 {
cell-index = <5>;
compatible = "qcom,eeprom";
cam_vio-supply = <&pm8008j_l3>;
cam_vana-supply = <&pm8008j_l5>;
cam_vdig-supply = <&pm8008j_l1>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
regulator-names = "cam_vio", "cam_vana", "cam_vdig",
"cam_clk";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2700000 950000 0>;
rgltr-max-voltage = <1800000 2900000 1150000 0>;
rgltr-load-current = <5000 35000 301000 0>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk5_active
&cam_sensor_active_rst5>;
pinctrl-1 = <&cam_sensor_mclk5_suspend
&cam_sensor_suspend_rst5>;
gpios = <&tlmm 105 0>,
<&tlmm 115 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK5",
"CAM_RESET5";
cci-master = <1>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK5_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
eeprom_ext_rgb1: qcom,eeprom8 {
cell-index = <9>;
compatible = "qcom,eeprom";
cam_vio-supply = <&pm8008j_l3>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
regulator-names = "cam_vio", "cam_clk";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 0>;
rgltr-max-voltage = <1800000 0>;
rgltr-load-current = <10000 0>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk4_active
&cam_sensor_active_rst4
&cam_sensor_active_ext_regs1>;
pinctrl-1 = <&cam_sensor_mclk4_suspend
&cam_sensor_suspend_rst4
&cam_sensor_suspend_ext_regs1>;
gpios = <&tlmm 104 0>,
<&tlmm 116 0>,
<&tlmm 29 0>;
gpio-reset = <1>;
gpio-custom1 = <2>;
gpio-req-tbl-num = <0 1 2>;
gpio-req-tbl-flags = <1 0 0>;
gpio-req-tbl-label = "CAMIF_MCLK4",
"CAM_RESET4",
"CAM_EXT_REGS1";
cci-master = <0>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK4_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
qcom,cam-sensor2 {
cell-index = <6>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <2>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_triple_uw>;
actuator-src = <&actuator_triple_uw>;
led-flash-src = <&led_flash_triple_rear_aux2>;
cam_vio-supply = <&pm8008j_l3>;
cam_vana-supply = <&pm8008i_l6>;
cam_vdig-supply = <&pm8008i_l2>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_bob-supply = <&pm8350c_bob>;
regulator-names = "cam_vio", "cam_vana", "cam_vdig",
"cam_clk", "cam_bob";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2700000 950000 0 3200000>;
rgltr-max-voltage = <1800000 2900000 1150000 0 3960000>;
rgltr-load-current = <3000 52000 257000 0 2000000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active
&cam_sensor_active_rst2>;
pinctrl-1 = <&cam_sensor_mclk2_suspend
&cam_sensor_suspend_rst2>;
gpios = <&tlmm 102 0>,
<&tlmm 106 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2";
cci-master = <0>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
qcom,cam-sensor4 {
cell-index = <3>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <4>;
eeprom-src = <&eeprom_tof1>;
sensor-position-roll = <270>;
sensor-position-pitch = <0>;
sensor-position-yaw = <0>;
cam_vio-supply = <&pm8008j_l3>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
regulator-names = "cam_vio", "cam_clk";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 0>;
rgltr-max-voltage = <1800000 0>;
rgltr-load-current = <185000 0>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk4_active
&cam_sensor_active_rst4>;
pinctrl-1 = <&cam_sensor_mclk4_suspend
&cam_sensor_suspend_rst4>;
gpios = <&tlmm 104 0>,
<&tlmm 116 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK4",
"CAM_RESET4";
cci-master = <1>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK4_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
qcom,cam-sensor5 {
cell-index = <2>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <5>;
sensor-position-roll = <270>;
sensor-position-pitch = <0>;
sensor-position-yaw = <0>;
eeprom-src = <&eeprom_front>;
cam_vio-supply = <&pm8008j_l3>;
cam_vana-supply = <&pm8008j_l5>;
cam_vdig-supply = <&pm8008j_l1>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
cam_bob-supply = <&pm8350c_bob>;
regulator-names = "cam_vio", "cam_vana", "cam_vdig",
"cam_clk", "cam_bob";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 2700000 950000 0 3200000>;
rgltr-max-voltage = <1800000 2900000 1150000 0 3960000>;
rgltr-load-current = <5000 35000 301000 0 2000000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk5_active
&cam_sensor_active_rst5>;
pinctrl-1 = <&cam_sensor_mclk5_suspend
&cam_sensor_suspend_rst5>;
gpios = <&tlmm 105 0>,
<&tlmm 115 0>;
gpio-reset = <1>;
gpio-req-tbl-num = <0 1>;
gpio-req-tbl-flags = <1 0>;
gpio-req-tbl-label = "CAMIF_MCLK5",
"CAM_RESET5";
cci-master = <1>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK5_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
qcom,cam-sensor8 {
cell-index = <9>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <4>;
sensor-position-roll = <90>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
eeprom-src = <&eeprom_ext_rgb1>;
actuator-src = <&actuator_triple_uw>;
led-flash-src = <&led_flash_triple_rear_aux>;
cam_vio-supply = <&pm8008j_l3>;
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
regulator-names = "cam_vio", "cam_clk";
rgltr-cntrl-support;
rgltr-min-voltage = <1800000 0>;
rgltr-max-voltage = <1800000 0>;
rgltr-load-current = <10000 0>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk4_active
&cam_sensor_active_rst4
&cam_sensor_active_ext_regs1>;
pinctrl-1 = <&cam_sensor_mclk4_suspend
&cam_sensor_suspend_rst4
&cam_sensor_suspend_ext_regs1>;
gpios = <&tlmm 104 0>,
<&tlmm 116 0>,
<&tlmm 29 0>;
gpio-reset = <1>;
gpio-custom1 = <2>;
gpio-req-tbl-num = <0 1 2>;
gpio-req-tbl-flags = <1 0 0>;
gpio-req-tbl-label = "CAMIF_MCLK4",
"CAM_RESET4",
"CAM_EXT_REGS1";
cci-master = <0>;
status = "ok";
clocks = <&clock_camcc CAM_CC_MCLK4_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
};
Reference in New Issue View Git Blame Copy Permalink