6f18ce8026
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
119 lines
3.0 KiB
YAML
119 lines
3.0 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/spi/qcom,spi-geni-qcom.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
|
|
|
|
maintainers:
|
|
- Andy Gross <agross@kernel.org>
|
|
- Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
|
|
description:
|
|
The QUP v3 core is a GENI based AHB slave that provides a common data path
|
|
(an output FIFO and an input FIFO) for serial peripheral interface (SPI)
|
|
mini-core.
|
|
|
|
SPI in master mode supports up to 50MHz, up to four chip selects,
|
|
programmable data path from 4 bits to 32 bits and numerous protocol variants.
|
|
|
|
SPI Controller nodes must be child of GENI based Qualcomm Universal
|
|
Peripharal. Please refer GENI based QUP wrapper controller node bindings
|
|
described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
|
|
|
|
allOf:
|
|
- $ref: /schemas/spi/spi-controller.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,geni-spi
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
clock-names:
|
|
const: se
|
|
|
|
dmas:
|
|
maxItems: 2
|
|
|
|
dma-names:
|
|
items:
|
|
- const: tx
|
|
- const: rx
|
|
|
|
interconnects:
|
|
minItems: 2
|
|
maxItems: 3
|
|
|
|
interconnect-names:
|
|
minItems: 2
|
|
items:
|
|
- const: qup-core
|
|
- const: qup-config
|
|
- const: qup-memory
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
operating-points-v2: true
|
|
|
|
power-domains:
|
|
maxItems: 1
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
required:
|
|
- compatible
|
|
- clocks
|
|
- clock-names
|
|
- interrupts
|
|
- reg
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/qcom,gcc-sc7180.h>
|
|
#include <dt-bindings/interconnect/qcom,sc7180.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/power/qcom-rpmpd.h>
|
|
|
|
spi@880000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x00880000 0x4000>;
|
|
clock-names = "se";
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&qup_spi0_default>;
|
|
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
power-domains = <&rpmhpd SC7180_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
|
|
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
|
|
interconnect-names = "qup-core", "qup-config";
|
|
};
|
|
|
|
- |
|
|
#include <dt-bindings/dma/qcom-gpi.h>
|
|
|
|
spi@884000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x00884000 0x4000>;
|
|
clock-names = "se";
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
|
|
dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
|
|
<&gpi_dma0 1 1 QCOM_GPI_SPI>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&qup_spi1_default>;
|
|
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|