samsung_sm8750/android_kernel_samsung_sm8750-devicetrees
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
79a44b80b6111f76bf6a574174c10cb22eb37df2
android_kernel_samsung_sm87…/qcom/pm8550vs.dtsi
Manaf Meethalavalappu Pallikunhi 79a44b80b6 ARM: dts: qcom: update thermal zone shutdown trip type for sun 
Use "hot" trip type for thermal zone software shutdown trip
for all thermal zones. It just notifies userspace thermal
manager which in turn triggers a graceful shutdown.

Change-Id: Icf7aa1f1da57a22b96ede18fcee75ebebb92830b
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
2024-03-25 23:48:04 +05:30

329 lines
6.6 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
pm8550vs_c: qcom,pm8550vs@2 {
compatible = "qcom,spmi-pmic";
reg = <0x2 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550vs_c_tz: pm8550vs-c-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550vs_c_gpios: pinctrl@8800 {
compatible = "qcom,pm8550vs-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550vs_d: qcom,pm8550vs@3 {
compatible = "qcom,spmi-pmic";
reg = <0x3 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550vs_d_tz: pm8550vs-d-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550vs_d_gpios: pinctrl@8800 {
compatible = "qcom,pm8550vs-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550vs_e: qcom,pm8550vs@4 {
compatible = "qcom,spmi-pmic";
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550vs_e_tz: pm8550vs-e-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550vs_e_gpios: pinctrl@8800 {
compatible = "qcom,pm8550vs-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550vs_f: qcom,pm8550vs@5 {
compatible = "qcom,spmi-pmic";
reg = <0x5 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550vs_f_tz: pm8550vs-f-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550vs_f_gpios: pinctrl@8800 {
compatible = "qcom,pm8550vs-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550vs_g: qcom,pm8550vs@6 {
compatible = "qcom,spmi-pmic";
reg = <0x6 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550vs_g_tz: pm8550vs-g-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550vs_g_gpios: pinctrl@8800 {
compatible = "qcom,pm8550vs-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550vs_j: qcom,pm8550vs@9 {
compatible = "qcom,spmi-pmic";
reg = <0x9 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550vs_j_tz: pm8550vs-j-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550vs_j_gpios: pinctrl@8800 {
compatible = "qcom,pm8550vs-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
&thermal_zones {
pm8550vs_c_temp_alarm: pm8550vs_c_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550vs_c_tz>;
status = "disabled";
trips {
pm8550vs_c_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550vs_c_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
pm8550vs_c_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
pm8550vs_d_temp_alarm: pm8550vs_d_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550vs_d_tz>;
status = "disabled";
trips {
pm8550vs_d_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550vs_d_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
pm8550vs_d_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
pm8550vs_e_temp_alarm: pm8550vs_e_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550vs_e_tz>;
status = "disabled";
trips {
pm8550vs_e_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550vs_e_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
pm8550vs_e_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
pm8550vs_f_temp_alarm: pm8550vs_f_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550vs_f_tz>;
status = "disabled";
trips {
pm8550vs_f_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550vs_f_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
pm8550vs_f_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
pm8550vs_g_temp_alarm: pm8550vs_g_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550vs_g_tz>;
status = "disabled";
trips {
pm8550vs_g_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550vs_g_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
pm8550vs_g_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
pm8550vs_j_temp_alarm: pm8550vs_j_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550vs_j_tz>;
status = "disabled";
trips {
pm8550vs_j_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550vs_j_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
pm8550vs_j_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
};
Reference in New Issue View Git Blame Copy Permalink