android_kernel_samsung_sm8750-devicetrees/qcom/tuna-rumi.dtsi

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
 */

#include <dt-bindings/clock/qcom,gcc-tuna.h>
#include <dt-bindings/clock/qcom,rpmh.h>

&arch_timer {
	clock-frequency = <500000>;
};

&memtimer {
	clock-frequency = <500000>;
};

&soc {
	usb_nop_phy: usb_nop_phy {
		compatible = "usb-nop-xceiv";
	};

	usb_emuphy: phy@a784000 {
		compatible = "qcom,usb-emu-phy";
		reg = <0x0a784000 0x9500>;

		qcom,emu-init-seq = <0xfffff 0x4
			0xffff0 0x4
			0x100000 0x20
			0x0 0x20
			0x000101F0 0x20
			0x00100000 0x3c
			0x0 0x3c
			0x0 0x4>;
	};
};

&ufsphy_mem {
	compatible = "qcom,ufs-phy-qrbtc-sdm845";

	/* VDDA_UFS_CORE */
	vdda-phy-supply = <&L1F>;
	vdda-phy-max-microamp = <214160>;
	/*
	 * Platforms supporting Gear 5 && Rate B require a different
	 * voltage supply. Check the Power Grid document.
	 */
	vdda-phy-min-microvolt = <912000>;

	/* VDDA_UFS_0_1P2 */
	vdda-pll-supply = <&L4B>;
	vdda-pll-max-microamp = <18340>;

	/* Phy GDSC for VDD_MX, always on */
	vdd-phy-gdsc-supply = <&gcc_ufs_mem_phy_gdsc>;

	/* Qref power supply, Refer Qref diagram */
	vdda-qref-supply = <&L2B>;
	vdda-qref-max-microamp = <64500>;

	/* Detect whether RH132 card based sequences to be used */
	qcom,soc_emulation_type_addr = <0x1fc8004>;
	qcom,soc_emulation_type_bits = <32>;

	status = "ok";
};

&ufshc_mem {
	limit-tx-hs-gear = <1>;
	limit-rx-hs-gear = <1>;
	limit-rate = <2>; /* HS Rate-B */
	rpm-level = <0>;
	spm-level = <0>;

	vdd-hba-supply = <&gcc_ufs_phy_gdsc>;

	vcc-supply = <&L12B>;
	vcc-max-microamp = <1200000>;

	vccq-supply = <&L3F>;
	vccq-max-microamp = <1200000>;

	qcom,vddp-ref-clk-supply = <&L5B>;
	qcom,vddp-ref-clk-max-microamp = <100>;

	qcom,vccq-parent-supply = <&S2B>;
	qcom,vccq-parent-max-microamp = <210000>;

	clock-names =
		"core_clk",
		"bus_aggr_clk",
		"iface_clk",
		"core_clk_unipro",
		"core_clk_ice",
		"ref_clk",
		"tx_lane0_sync_clk",
		"rx_lane0_sync_clk",
		"rx_lane1_sync_clk";
	clocks =
		<&gcc GCC_UFS_PHY_AXI_CLK>,
		<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
		<&gcc GCC_UFS_PHY_AHB_CLK>,
		<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
		<&gcc GCC_UFS_PHY_ICE_CORE_CLK>,
		<&rpmhcc RPMH_CXO_PAD_CLK>,
		<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
		<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
		<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;

	qcom,disable-lpm;

	status = "ok";
};

&usb0 {
	dwc3@a600000 {
		usb-phy = <&usb_emuphy>, <&usb_nop_phy>;
		dr_mode = "peripheral";
		maximum-speed = "high-speed";
	};
};

&cam_rsc {
	status = "disabled";
};

&disp_rsc {
	status = "disabled";
};

&qupv3_se7_2uart {
	qcom,rumi_platform;
};

&GOLD_OFF_CL0 {
	status = "disabled";
};

&GOLD_OFF_CL1 {
	status = "disabled";
};

&GOLD_OFF_CL2 {
	status = "disabled";
};

&GOLD_RAIL_OFF_CL0 {
	status = "disabled";
};

&GOLD_RAIL_OFF_CL1 {
	status = "disabled";
};

&GOLD_RAIL_OFF_CL2 {
	status = "disabled";
};

&GOLD_PLUS_OFF {
	status = "disabled";
};

&GOLD_PLUS_RAIL_OFF {
	status = "disabled";
};

&CLUSTER_PWR_DN {
	status = "disabled";
};

&CX_RET {
	status = "disabled";
};

&APSS_OFF {
	status = "disabled";
};

&tsens0 {
	status = "disabled";
};

&tsens1 {
	status = "disabled";
};

&tsens2 {
	status = "disabled";
};

&tsens3 {
	status = "disabled";
};

&rpmhcc {
	compatible = "fixed-clock";
	clock-output-names = "rpmh_clocks";
	clock-frequency = <19200000>;
};

&disp_cc_mdss_core_gdsc {
	status = "ok";
};

&disp_cc_mdss_core_int2_gdsc {
	status = "ok";
};