32b6a7bbaf
Removal of I2S0_DATA1 pin, as GPIO_63 is not used internally for I2S purpose and it is being used by other subsystem. Change-Id: I7c3636f9dfcebc68ed3da95793c158e70ad95184 Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
1952 lines
32 KiB
Plaintext
1952 lines
32 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
|
*/
|
|
|
|
&tlmm {
|
|
i2s0_sck {
|
|
i2s0_sck_sleep: i2s0_sck_sleep {
|
|
mux {
|
|
pins = "gpio60";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio60";
|
|
drive-strength = <2>; /* 2 mA */
|
|
bias-pull-down; /* PULL DOWN */
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
i2s0_sck_active: i2s0_sck_active {
|
|
mux {
|
|
pins = "gpio60";
|
|
function = "i2s0_sck";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio60";
|
|
drive-strength = <8>; /* 8 mA */
|
|
bias-disable; /* NO PULL */
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
i2s0_ws {
|
|
i2s0_ws_sleep: i2s0_ws_sleep {
|
|
mux {
|
|
pins = "gpio61";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio61";
|
|
drive-strength = <2>; /* 2 mA */
|
|
bias-pull-down; /* PULL DOWN */
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
i2s0_ws_active: i2s0_ws_active {
|
|
mux {
|
|
pins = "gpio61";
|
|
function = "i2s0_ws";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio61";
|
|
drive-strength = <8>; /* 8 mA */
|
|
bias-disable; /* NO PULL */
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
i2s0_sd0 {
|
|
i2s0_sd0_sleep: i2s0_sd0_sleep {
|
|
mux {
|
|
pins = "gpio62";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio62";
|
|
drive-strength = <2>; /* 2 mA */
|
|
bias-pull-down; /* PULL DOWN */
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
i2s0_sd0_active: i2s0_sd0_active {
|
|
mux {
|
|
pins = "gpio62";
|
|
function = "i2s0_data0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio62";
|
|
drive-strength = <8>; /* 8 mA */
|
|
bias-disable; /* NO PULL */
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* WCD reset pin */
|
|
wcd_reset_active: wcd_reset_active {
|
|
mux {
|
|
pins = "gpio150";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio150";
|
|
drive-strength = <16>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
wcd_reset_sleep: wcd_reset_sleep {
|
|
mux {
|
|
pins = "gpio150";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio150";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
/* WSA speaker reset pins North Pins*/
|
|
spkr_1_sd_n {
|
|
spkr_1_sd_n_sleep: spkr_1_sd_n_sleep {
|
|
mux {
|
|
pins = "gpio59";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio59";
|
|
drive-strength = <2>; /* 2 mA */
|
|
bias-pull-down;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
spkr_1_sd_n_active: spkr_1_sd_n_active {
|
|
mux {
|
|
pins = "gpio59";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio59";
|
|
drive-strength = <16>; /* 16 mA */
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* WSA speaker reset pins south Pins*/
|
|
spkr_2_sd_n {
|
|
spkr_2_sd_n_sleep: spkr_2_sd_n_sleep {
|
|
mux {
|
|
pins = "gpio69";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio69";
|
|
drive-strength = <2>; /* 2 mA */
|
|
bias-pull-down;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
spkr_2_sd_n_active: spkr_2_sd_n_active {
|
|
mux {
|
|
pins = "gpio69";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio69";
|
|
drive-strength = <16>; /* 16 mA */
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se0_i2c_pins: qupv3_se0_i2c_pins {
|
|
qupv3_se0_i2c_sda_active: qupv3_se0_i2c_sda_active {
|
|
mux {
|
|
pins = "gpio28";
|
|
function = "qup1_se0_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio28";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se0_i2c_scl_active: qupv3_se0_i2c_scl_active {
|
|
mux {
|
|
pins = "gpio29";
|
|
function = "qup1_se0_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio29";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se0_i2c_sleep: qupv3_se0_i2c_sleep {
|
|
mux {
|
|
pins = "gpio28", "gpio29";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio28", "gpio29";
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se0_spi_pins: qupv3_se0_spi_pins {
|
|
qupv3_se0_spi_miso_active: qupv3_se0_spi_miso_active {
|
|
mux {
|
|
pins = "gpio28";
|
|
function = "qup1_se0_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio28";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se0_spi_mosi_active: qupv3_se0_spi_mosi_active {
|
|
mux {
|
|
pins = "gpio29";
|
|
function = "qup1_se0_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio29";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se0_spi_clk_active: qupv3_se0_spi_clk_active {
|
|
mux {
|
|
pins = "gpio30";
|
|
function = "qup1_se0_l2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio30";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se0_spi_cs_active: qupv3_se0_spi_cs_active {
|
|
mux {
|
|
pins = "gpio31";
|
|
function = "qup1_se0_l3";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio31";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se0_spi_sleep: qupv3_se0_spi_sleep {
|
|
mux {
|
|
pins = "gpio28", "gpio29",
|
|
"gpio30", "gpio31";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio28", "gpio29",
|
|
"gpio30", "gpio31";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se1_i2c_pins: qupv3_se1_i2c_pins {
|
|
qupv3_se1_i2c_sda_active: qupv3_se1_i2c_sda_active {
|
|
mux {
|
|
pins = "gpio32";
|
|
function = "qup1_se1_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio32";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se1_i2c_scl_active: qupv3_se1_i2c_scl_active {
|
|
mux {
|
|
pins = "gpio33";
|
|
function = "qup1_se1_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio33";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se1_i2c_sleep: qupv3_se1_i2c_sleep {
|
|
mux {
|
|
pins = "gpio32", "gpio33";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio32", "gpio33";
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se1_spi_pins: qupv3_se1_spi_pins {
|
|
qupv3_se1_spi_miso_active: qupv3_se1_spi_miso_active {
|
|
mux {
|
|
pins = "gpio32";
|
|
function = "qup1_se1_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio32";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se1_spi_mosi_active: qupv3_se1_spi_mosi_active {
|
|
mux {
|
|
pins = "gpio33";
|
|
function = "qup1_se1_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio33";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se1_spi_clk_active: qupv3_se1_spi_clk_active {
|
|
mux {
|
|
pins = "gpio34";
|
|
function = "qup1_se1_l2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio34";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se1_spi_cs_active: qupv3_se1_spi_cs_active {
|
|
mux {
|
|
pins = "gpio35";
|
|
function = "qup1_se1_l3";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio35";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se1_spi_sleep: qupv3_se1_spi_sleep {
|
|
mux {
|
|
pins = "gpio32", "gpio33",
|
|
"gpio34", "gpio35";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio32", "gpio33",
|
|
"gpio34", "gpio35";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se2_i2c_pins: qupv3_se2_i2c_pins {
|
|
qupv3_se2_i2c_sda_active: qupv3_se2_i2c_sda_active {
|
|
mux {
|
|
pins = "gpio52";
|
|
function = "qup1_se2_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio52";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se2_i2c_scl_active: qupv3_se2_i2c_scl_active {
|
|
mux {
|
|
pins = "gpio53";
|
|
function = "qup1_se2_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio53";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se2_i2c_sleep: qupv3_se2_i2c_sleep {
|
|
mux {
|
|
pins = "gpio52", "gpio53";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio52", "gpio53";
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se2_spi_pins: qupv3_se2_spi_pins {
|
|
qupv3_se2_spi_miso_active: qupv3_se2_spi_miso_active {
|
|
mux {
|
|
pins = "gpio52";
|
|
function = "qup1_se2_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio52";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se2_spi_mosi_active: qupv3_se2_spi_mosi_active {
|
|
mux {
|
|
pins = "gpio53";
|
|
function = "qup1_se2_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio53";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se2_spi_clk_active: qupv3_se2_spi_clk_active {
|
|
mux {
|
|
pins = "gpio54";
|
|
function = "qup1_se2_l2_mira";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio54";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se2_spi_cs_active: qupv3_se2_spi_cs_active {
|
|
mux {
|
|
pins = "gpio55";
|
|
function = "qup1_se2_l3_mira";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio55";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se2_spi_sleep: qupv3_se2_spi_sleep {
|
|
mux {
|
|
pins = "gpio52", "gpio53",
|
|
"gpio54", "gpio55";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio52", "gpio53",
|
|
"gpio54", "gpio55";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se3_i2c_pins: qupv3_se3_i2c_pins {
|
|
qupv3_se3_i2c_sda_active: qupv3_se3_i2c_sda_active {
|
|
mux {
|
|
pins = "gpio44";
|
|
function = "qup1_se3_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio44";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se3_i2c_scl_active: qupv3_se3_i2c_scl_active {
|
|
mux {
|
|
pins = "gpio45";
|
|
function = "qup1_se3_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio45";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se3_i2c_sleep: qupv3_se3_i2c_sleep {
|
|
mux {
|
|
pins = "gpio44", "gpio45";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio44", "gpio45";
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se3_spi_pins: qupv3_se3_spi_pins {
|
|
qupv3_se3_spi_miso_active: qupv3_se3_spi_miso_active {
|
|
mux {
|
|
pins = "gpio44";
|
|
function = "qup1_se3_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio44";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se3_spi_mosi_active: qupv3_se3_spi_mosi_active {
|
|
mux {
|
|
pins = "gpio45";
|
|
function = "qup1_se3_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio45";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se3_spi_clk_active: qupv3_se3_spi_clk_active {
|
|
mux {
|
|
pins = "gpio46";
|
|
function = "qup1_se3_l2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio46";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se3_spi_cs_active: qupv3_se3_spi_cs_active {
|
|
mux {
|
|
pins = "gpio47";
|
|
function = "qup1_se3_l3";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio47";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se3_spi_sleep: qupv3_se3_spi_sleep {
|
|
mux {
|
|
pins = "gpio44", "gpio45",
|
|
"gpio46", "gpio47";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio44", "gpio45",
|
|
"gpio46", "gpio47";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se4_i2c_pins: qupv3_se4_i2c_pins {
|
|
qupv3_se4_i2c_sda_active: qupv3_se4_i2c_sda_active {
|
|
mux {
|
|
pins = "gpio36";
|
|
function = "qup1_se4_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio36";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se4_i2c_scl_active: qupv3_se4_i2c_scl_active {
|
|
mux {
|
|
pins = "gpio37";
|
|
function = "qup1_se4_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio37";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se4_i2c_sleep: qupv3_se4_i2c_sleep {
|
|
mux {
|
|
pins = "gpio36", "gpio37";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio36", "gpio37";
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se5_4uart_pins: qupv3_se5_4uart_pins {
|
|
qupv3_se5_default_cts: qupv3_se5_default_cts {
|
|
mux {
|
|
pins = "gpio132";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio132";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se5_default_rts: qupv3_se5_default_rts {
|
|
mux {
|
|
pins = "gpio133";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio133";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
qupv3_se5_default_tx: qupv3_se5_default_tx {
|
|
mux {
|
|
pins = "gpio134";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio134";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
qupv3_se5_default_rx: qupv3_se5_default_rx {
|
|
mux {
|
|
pins = "gpio135";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio135";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
qupv3_se5_cts: qupv3_se5_cts {
|
|
mux {
|
|
pins = "gpio132";
|
|
function = "qup1_se5_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio132";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se5_rts: qupv3_se5_rts {
|
|
mux {
|
|
pins = "gpio133";
|
|
function = "qup1_se5_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio133";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
qupv3_se5_tx: qupv3_se5_tx {
|
|
mux {
|
|
pins = "gpio134";
|
|
function = "qup1_se5_l2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio134";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
qupv3_se5_rx_active: qupv3_se5_rx_active {
|
|
mux {
|
|
pins = "gpio135";
|
|
function = "qup1_se5_l3";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio135";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
/* RX to be in gpio mode for sleep config */
|
|
qupv3_se5_rx_wake: qupv3_se5_rx_wake {
|
|
mux {
|
|
pins = "gpio135";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio135";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se6_i2c_pins: qupv3_se6_i2c_pins {
|
|
qupv3_se6_i2c_sda_active: qupv3_se6_i2c_sda_active {
|
|
mux {
|
|
pins = "gpio40";
|
|
function = "qup1_se6_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio40";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se6_i2c_scl_active: qupv3_se6_i2c_scl_active {
|
|
mux {
|
|
pins = "gpio54";
|
|
function = "qup1_se6_l1_mirb";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio54";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se6_i2c_sleep: qupv3_se6_i2c_sleep {
|
|
mux {
|
|
pins = "gpio40", "gpio54";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio40", "gpio54";
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se6_spi_pins: qupv3_se6_spi_pins {
|
|
qupv3_se6_spi_miso_active: qupv3_se6_spi_miso_active {
|
|
mux {
|
|
pins = "gpio40";
|
|
function = "qup1_se6_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio40";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se6_spi_mosi_active: qupv3_se6_spi_mosi_active {
|
|
mux {
|
|
pins = "gpio54";
|
|
function = "qup1_se6_l1_mirb";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio54";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se6_spi_clk_active: qupv3_se6_spi_clk_active {
|
|
mux {
|
|
pins = "gpio42";
|
|
function = "qup1_se6_l2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio42";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se6_spi_cs_active: qupv3_se6_spi_cs_active {
|
|
mux {
|
|
pins = "gpio55";
|
|
function = "qup1_se6_l3_mirb";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio55";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se6_spi_sleep: qupv3_se6_spi_sleep {
|
|
mux {
|
|
pins = "gpio40", "gpio54",
|
|
"gpio42", "gpio55";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio40", "gpio54",
|
|
"gpio42", "gpio55";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se7_i2c_pins: qupv3_se7_i2c_pins {
|
|
qupv3_se7_i2c_sda_active: qupv3_se7_i2c_sda_active {
|
|
mux {
|
|
pins = "gpio81";
|
|
function = "qup1_se7_l0_mira";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio81";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se7_i2c_scl_active: qupv3_se7_i2c_scl_active {
|
|
mux {
|
|
pins = "gpio80";
|
|
function = "qup1_se7_l1_mira";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio80";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se7_i2c_sleep: qupv3_se7_i2c_sleep {
|
|
mux {
|
|
pins = "gpio81", "gpio80";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio81", "gpio80";
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se7_spi_pins: qupv3_se7_spi_pins {
|
|
qupv3_se7_spi_miso_active: qupv3_se7_spi_miso_active {
|
|
mux {
|
|
pins = "gpio81";
|
|
function = "qup1_se7_l0_mira";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio81";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se7_spi_mosi_active: qupv3_se7_spi_mosi_active {
|
|
mux {
|
|
pins = "gpio80";
|
|
function = "qup1_se7_l1_mira";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio80";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se7_spi_clk_active: qupv3_se7_spi_clk_active {
|
|
mux {
|
|
pins = "gpio114";
|
|
function = "qup1_se7_l2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio114";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se7_spi_cs_active: qupv3_se7_spi_cs_active {
|
|
mux {
|
|
pins = "gpio78";
|
|
function = "qup1_se7_l3";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio78";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se7_spi_sleep: qupv3_se7_spi_sleep {
|
|
mux {
|
|
pins = "gpio81", "gpio80",
|
|
"gpio114", "gpio78";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio81", "gpio80",
|
|
"gpio114", "gpio78";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se8_i2c_pins: qupv3_se8_i2c_pins {
|
|
qupv3_se8_i2c_sda_active: qupv3_se8_i2c_sda_active {
|
|
mux {
|
|
pins = "gpio0";
|
|
function = "qup2_se0_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio0";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se8_i2c_scl_active: qupv3_se8_i2c_scl_active {
|
|
mux {
|
|
pins = "gpio1";
|
|
function = "qup2_se0_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio1";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se8_i2c_sleep: qupv3_se8_i2c_sleep {
|
|
mux {
|
|
pins = "gpio0", "gpio1";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio0", "gpio1";
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se8_spi_pins: qupv3_se8_spi_pins {
|
|
qupv3_se8_spi_miso_active: qupv3_se8_spi_miso_active {
|
|
mux {
|
|
pins = "gpio0";
|
|
function = "qup2_se0_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio0";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se8_spi_mosi_active: qupv3_se8_spi_mosi_active {
|
|
mux {
|
|
pins = "gpio1";
|
|
function = "qup2_se0_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio1";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se8_spi_clk_active: qupv3_se8_spi_clk_active {
|
|
mux {
|
|
pins = "gpio2";
|
|
function = "qup2_se0_l2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio2";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se8_spi_cs_active: qupv3_se8_spi_cs_active {
|
|
mux {
|
|
pins = "gpio3";
|
|
function = "qup2_se0_l3";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio3";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se8_spi_sleep: qupv3_se8_spi_sleep {
|
|
mux {
|
|
pins = "gpio0", "gpio1",
|
|
"gpio2", "gpio3";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio0", "gpio1",
|
|
"gpio2", "gpio3";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se9_i2c_pins: qupv3_se9_i2c_pins {
|
|
qupv3_se9_i2c_sda_active: qupv3_se9_i2c_sda_active {
|
|
mux {
|
|
pins = "gpio4";
|
|
function = "qup2_se1_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio4";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se9_i2c_scl_active: qupv3_se9_i2c_scl_active {
|
|
mux {
|
|
pins = "gpio5";
|
|
function = "qup2_se1_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio5";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se9_i2c_sleep: qupv3_se9_i2c_sleep {
|
|
mux {
|
|
pins = "gpio4", "gpio5";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio4", "gpio5";
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se9_spi_pins: qupv3_se9_spi_pins {
|
|
qupv3_se9_spi_miso_active: qupv3_se9_spi_miso_active {
|
|
mux {
|
|
pins = "gpio4";
|
|
function = "qup2_se1_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio4";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se9_spi_mosi_active: qupv3_se9_spi_mosi_active {
|
|
mux {
|
|
pins = "gpio5";
|
|
function = "qup2_se1_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio5";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se9_spi_clk_active: qupv3_se9_spi_clk_active {
|
|
mux {
|
|
pins = "gpio6";
|
|
function = "qup2_se1_l2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio6";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se9_spi_cs_active: qupv3_se9_spi_cs_active {
|
|
mux {
|
|
pins = "gpio7";
|
|
function = "qup2_se1_l3";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio7";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se9_spi_sleep: qupv3_se9_spi_sleep {
|
|
mux {
|
|
pins = "gpio4", "gpio5",
|
|
"gpio6", "gpio7";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio4", "gpio5",
|
|
"gpio6", "gpio7";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se10_i2c_pins: qupv3_se10_i2c_pins {
|
|
qupv3_se10_i2c_sda_active: qupv3_se10_i2c_sda_active {
|
|
mux {
|
|
pins = "gpio8";
|
|
function = "qup2_se2_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio8";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se10_i2c_scl_active: qupv3_se10_i2c_scl_active {
|
|
mux {
|
|
pins = "gpio9";
|
|
function = "qup2_se2_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio9";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se10_i2c_sleep: qupv3_se10_i2c_sleep {
|
|
mux {
|
|
pins = "gpio8", "gpio9";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio8", "gpio9";
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se10_spi_pins: qupv3_se10_spi_pins {
|
|
qupv3_se10_spi_miso_active: qupv3_se10_spi_miso_active {
|
|
mux {
|
|
pins = "gpio8";
|
|
function = "qup2_se2_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio8";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se10_spi_mosi_active: qupv3_se10_spi_mosi_active {
|
|
mux {
|
|
pins = "gpio9";
|
|
function = "qup2_se2_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio9";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se10_spi_clk_active: qupv3_se10_spi_clk_active {
|
|
mux {
|
|
pins = "gpio10";
|
|
function = "qup2_se2_l2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio10";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se10_spi_cs_active: qupv3_se10_spi_cs_active {
|
|
mux {
|
|
pins = "gpio11";
|
|
function = "qup2_se2_l3";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio11";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se10_spi_sleep: qupv3_se10_spi_sleep {
|
|
mux {
|
|
pins = "gpio8", "gpio9",
|
|
"gpio10", "gpio11";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio8", "gpio9",
|
|
"gpio10", "gpio11";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se11_i2c_pins: qupv3_se11_i2c_pins {
|
|
qupv3_se11_i2c_sda_active: qupv3_se11_i2c_sda_active {
|
|
mux {
|
|
pins = "gpio79";
|
|
function = "qup2_se3_l0_mira";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio79";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se11_i2c_scl_active: qupv3_se11_i2c_scl_active {
|
|
mux {
|
|
pins = "gpio97";
|
|
function = "qup2_se3_l1_mira";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio97";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se11_i2c_sleep: qupv3_se11_i2c_sleep {
|
|
mux {
|
|
pins = "gpio79", "gpio97";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio79", "gpio97";
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se11_spi_pins: qupv3_se11_spi_pins {
|
|
qupv3_se11_spi_miso_active: qupv3_se11_spi_miso_active {
|
|
mux {
|
|
pins = "gpio79";
|
|
function = "qup2_se3_l0_mira";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio79";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se11_spi_mosi_active: qupv3_se11_spi_mosi_active {
|
|
mux {
|
|
pins = "gpio97";
|
|
function = "qup2_se3_l1_mira";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio97";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se11_spi_clk_active: qupv3_se11_spi_clk_active {
|
|
mux {
|
|
pins = "gpio100";
|
|
function = "qup2_se3_l2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio100";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se11_spi_cs_active: qupv3_se11_spi_cs_active {
|
|
mux {
|
|
pins = "gpio116";
|
|
function = "qup2_se3_l3";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio116";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se11_spi_sleep: qupv3_se11_spi_sleep {
|
|
mux {
|
|
pins = "gpio79", "gpio97",
|
|
"gpio100", "gpio116";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio79", "gpio97",
|
|
"gpio100", "gpio116";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se12_i2c_pins: qupv3_se12_i2c_pins {
|
|
qupv3_se12_i2c_sda_active: qupv3_se12_i2c_sda_active {
|
|
mux {
|
|
pins = "gpio12";
|
|
function = "qup2_se4_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio12";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se12_i2c_scl_active: qupv3_se12_i2c_scl_active {
|
|
mux {
|
|
pins = "gpio13";
|
|
function = "qup2_se4_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio13";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se12_i2c_sleep: qupv3_se12_i2c_sleep {
|
|
mux {
|
|
pins = "gpio12", "gpio13";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio12", "gpio13";
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se12_spi_pins: qupv3_se12_spi_pins {
|
|
qupv3_se12_spi_miso_active: qupv3_se12_spi_miso_active {
|
|
mux {
|
|
pins = "gpio12";
|
|
function = "qup2_se4_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio12";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se12_spi_mosi_active: qupv3_se12_spi_mosi_active {
|
|
mux {
|
|
pins = "gpio13";
|
|
function = "qup2_se4_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio13";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se12_spi_clk_active: qupv3_se12_spi_clk_active {
|
|
mux {
|
|
pins = "gpio26";
|
|
function = "qup2_se4_l2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio26";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se12_spi_cs_active: qupv3_se12_spi_cs_active {
|
|
mux {
|
|
pins = "gpio27";
|
|
function = "qup2_se4_l3";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio27";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se12_spi_sleep: qupv3_se12_spi_sleep {
|
|
mux {
|
|
pins = "gpio12", "gpio13",
|
|
"gpio26", "gpio27";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio12", "gpio13",
|
|
"gpio26", "gpio27";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se13_2uart_pins: qupv3_se13_2uart_pins {
|
|
qupv3_se13_2uart_tx_active: qupv3_se13_2uart_tx_active {
|
|
mux {
|
|
pins = "gpio18";
|
|
function = "qup2_se5_l2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio18";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se13_2uart_rx_active: qupv3_se13_2uart_rx_active {
|
|
mux {
|
|
pins = "gpio19";
|
|
function = "qup2_se5_l3";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio19";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se13_2uart_sleep: qupv3_se13_2uart_sleep {
|
|
mux {
|
|
pins = "gpio18", "gpio19";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio18", "gpio19";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se14_i2c_pins: qupv3_se14_i2c_pins {
|
|
qupv3_se14_i2c_sda_active: qupv3_se14_i2c_sda_active {
|
|
mux {
|
|
pins = "gpio20";
|
|
function = "qup2_se6_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio20";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se14_i2c_scl_active: qupv3_se14_i2c_scl_active {
|
|
mux {
|
|
pins = "gpio21";
|
|
function = "qup2_se6_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio21";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se14_i2c_sleep: qupv3_se14_i2c_sleep {
|
|
mux {
|
|
pins = "gpio20", "gpio21";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio20", "gpio21";
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se14_spi_pins: qupv3_se14_spi_pins {
|
|
qupv3_se14_spi_miso_active: qupv3_se14_spi_miso_active {
|
|
mux {
|
|
pins = "gpio20";
|
|
function = "qup2_se6_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio20";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se14_spi_mosi_active: qupv3_se14_spi_mosi_active {
|
|
mux {
|
|
pins = "gpio21";
|
|
function = "qup2_se6_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio21";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se14_spi_clk_active: qupv3_se14_spi_clk_active {
|
|
mux {
|
|
pins = "gpio22";
|
|
function = "qup2_se6_l2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio22";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se14_spi_cs_active: qupv3_se14_spi_cs_active {
|
|
mux {
|
|
pins = "gpio23";
|
|
function = "qup2_se6_l3";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio23";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se14_spi_sleep: qupv3_se14_spi_sleep {
|
|
mux {
|
|
pins = "gpio20", "gpio21",
|
|
"gpio22", "gpio23";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio20", "gpio21",
|
|
"gpio22", "gpio23";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se15_i2c_pins: qupv3_se15_i2c_pins {
|
|
qupv3_se15_i2c_sda_active: qupv3_se15_i2c_sda_active {
|
|
mux {
|
|
pins = "gpio27";
|
|
function = "qup2_se7_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio27";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se15_i2c_scl_active: qupv3_se15_i2c_scl_active {
|
|
mux {
|
|
pins = "gpio26";
|
|
function = "qup2_se7_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio26";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
qcom,i2c_pull;
|
|
};
|
|
};
|
|
|
|
qupv3_se15_i2c_sleep: qupv3_se15_i2c_sleep {
|
|
mux {
|
|
pins = "gpio27", "gpio26";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio27", "gpio26";
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qupv3_se15_spi_pins: qupv3_se15_spi_pins {
|
|
qupv3_se15_spi_miso_active: qupv3_se15_spi_miso_active {
|
|
mux {
|
|
pins = "gpio27";
|
|
function = "qup2_se7_l0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio27";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se15_spi_mosi_active: qupv3_se15_spi_mosi_active {
|
|
mux {
|
|
pins = "gpio26";
|
|
function = "qup2_se7_l1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio26";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se15_spi_clk_active: qupv3_se15_spi_clk_active {
|
|
mux {
|
|
pins = "gpio13";
|
|
function = "qup2_se7_l2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio13";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se15_spi_cs_active: qupv3_se15_spi_cs_active {
|
|
mux {
|
|
pins = "gpio12";
|
|
function = "qup2_se7_l3";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio12";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qupv3_se15_spi_sleep: qupv3_se15_spi_sleep {
|
|
mux {
|
|
pins = "gpio27", "gpio26",
|
|
"gpio13", "gpio12";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio27", "gpio26",
|
|
"gpio13", "gpio12";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
/* touchscreen pins */
|
|
pmx_ts_active {
|
|
ts_active: ts_active {
|
|
mux {
|
|
pins = "gpio16", "gpio13";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio16", "gpio13";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_ts_reset_suspend {
|
|
ts_reset_suspend: ts_reset_suspend {
|
|
mux {
|
|
pins = "gpio16";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio16";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_ts_int_suspend {
|
|
ts_int_suspend: ts_int_suspend {
|
|
mux {
|
|
pins = "gpio13";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio13";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_ts_release {
|
|
ts_release: ts_release {
|
|
mux {
|
|
pins = "gpio16", "gpio13";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio16", "gpio13";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* sdcc2 pins */
|
|
sdc2_on: sdc2_on {
|
|
clk {
|
|
pins = "gpio62";
|
|
function = "SDC2_CLK";
|
|
bias-disable;
|
|
drive-strength = <16>;
|
|
};
|
|
|
|
cmd {
|
|
pins = "gpio51";
|
|
function = "SDC2_CMD";
|
|
bias-pull-up;
|
|
drive-strength = <10>;
|
|
};
|
|
|
|
data {
|
|
pins = "gpio38", "gpio39", "gpio48", "gpio49";
|
|
function = "SDC2_DATA";
|
|
bias-pull-up;
|
|
drive-strength = <10>;
|
|
};
|
|
|
|
sd-cd {
|
|
pins = "gpio58";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
|
|
sdc2_off: sdc2_off {
|
|
clk {
|
|
pins = "gpio62";
|
|
function = "gpio";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
cmd {
|
|
pins = "gpio51";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
data {
|
|
pins = "gpio38", "gpio39", "gpio48", "gpio49";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
sd-cd {
|
|
pins = "gpio58";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|