1d4a80d339
git-subtree-dir: qcom/display git-subtree-mainline:5c1b2eea72git-subtree-split:8c12068d4d
2077 lines
78 KiB
YAML
2077 lines
78 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/sde.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: SDE KMS
|
|
|
|
maintainers:
|
|
- Veera Sundaram Sankaran <quic_veeras@quicinc.com>
|
|
- Kalyan Thota <quic_kalyant@quicinc.com>
|
|
- Ravi Teja Tamatam <quic_travitej@quicinc.com>
|
|
- Jatin Srivastava <quic_jsrivast@quicinc.com>
|
|
|
|
description: |
|
|
Snapdragon Display Engine implements Linux DRM/KMS APIs to drive user
|
|
interface to different panel interfaces. SDE driver is the core of
|
|
display subsystem which manage all data paths to different panel interfaces
|
|
Please refer to ../../interrupt-controller/interrupts.txt for a general
|
|
description of interrupt bindings.
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,sde-kms
|
|
|
|
qcom,msm-hdmi-audio-rx:
|
|
type: object
|
|
compatible:
|
|
const: qcom,msm-hdmi-audio-codec-rx
|
|
|
|
reg:
|
|
description: |
|
|
Offset and length of the register set for the device.Base address and length of DP hardware's
|
|
memory mapped regions.
|
|
|
|
reg-names:
|
|
description: Names to refer to register sets related to this device
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
|
|
clocks:
|
|
description: List of Phandles for clock device nodes needed by the device.
|
|
|
|
clock-names:
|
|
description: List of clock names needed by the device.
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
|
|
mmagic-supply:
|
|
description: Phandle for mmagic mdss supply regulator device node.
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
|
|
vdd-supply:
|
|
description: Phandle for vdd regulator device node.
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
|
|
interrupt-parent:
|
|
description: Must be core interrupt controller.
|
|
|
|
interrupts:
|
|
description: Interrupt associated with MDSS.
|
|
|
|
interrupt-controller:
|
|
description: Mark the device node as an interrupt controller.
|
|
|
|
'#interrupt-cells':
|
|
description: Should be one. The first cell is interrupt number.
|
|
|
|
iommus:
|
|
description: Specifies the SID's used by this context bank.
|
|
|
|
qcom,sde-sspp-type:
|
|
description: |
|
|
Array of strings for SDE source surface pipes type information.
|
|
A source pipe can be "vig", "rgb", "dma" or "cursor" type.
|
|
Number of xin ids defined should match the number of offsets
|
|
defined in property: qcom,sde-sspp-off.
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
enum: [vig, rgb, dma, cursor]
|
|
|
|
qcom,sde-sspp-off:
|
|
description: |
|
|
Array of offset for SDE source surface pipes. The offsets
|
|
are calculated from register "mdp_phys" defined in
|
|
reg property + "sde-off". The number of offsets defined here should
|
|
reflect the amount of pipes that can be active in SDE for
|
|
this configuration.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-sspp-xin-id:
|
|
description: |
|
|
Array of VBIF clients ids (xins) corresponding
|
|
to the respective source pipes. Number of xin ids
|
|
defined should match the number of offsets
|
|
defined in property: qcom,sde-sspp-off.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-ctl-off:
|
|
description: |
|
|
Array of offset addresses for the available ctl
|
|
hw blocks within SDE, these offsets are
|
|
calculated from register "mdp_phys" defined in
|
|
reg property. The number of ctl offsets defined
|
|
here should reflect the number of control paths
|
|
that can be configured concurrently on SDE for
|
|
this configuration.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-wb-off:
|
|
description: |
|
|
Array of offset addresses for the programmable
|
|
writeback blocks within SDE.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-wb-xin-id:
|
|
description: |
|
|
Array of VBIF clients ids (xins) corresponding
|
|
to the respective writeback. Number of xin ids
|
|
defined should match the number of offsets
|
|
defined in property: qcom,sde-wb-off..
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-mixer-off:
|
|
description: |
|
|
Array of offset addresses for the available
|
|
mixer blocks that can drive data to panel
|
|
interfaces. These offsets are be calculated from
|
|
register "mdp_phys" defined in reg property.
|
|
The number of offsets defined should reflect the
|
|
amount of mixers that can drive data to a panel
|
|
interface.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dspp-top-off:
|
|
description: |
|
|
Offset address for the dspp top block.
|
|
The offset is calculated from register "mdp_phys"
|
|
defined in reg property.
|
|
|
|
qcom,sde-dspp-off:
|
|
description: |
|
|
Array of offset addresses for the available dspp
|
|
blocks. These offsets are calculated from
|
|
register "mdp_phys" defined in reg property.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-pp-off:
|
|
description: |
|
|
Array of offset addresses for the available
|
|
pingpong blocks. These offsets are calculated
|
|
from register "mdp_phys" defined in reg property.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-pp-slave:
|
|
description: |
|
|
Array of flags indicating whether each ping pong
|
|
block may be configured as a pp slave.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-pp-merge-3d-id:
|
|
description: |
|
|
Array of index ID values for the merge 3d block
|
|
connected to each pingpong, starting at 0.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-merge-3d-off:
|
|
description: |
|
|
Array of offset addresses for the available
|
|
merge 3d blocks. These offsets are calculated
|
|
from register "mdp_phys" defined in reg property.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-intf-off:
|
|
description: |
|
|
Array of offset addresses for the available SDE
|
|
interface blocks that can drive data to a
|
|
panel controller. The offsets are calculated
|
|
from "mdp_phys" defined in reg property. The number
|
|
of offsets defined should reflect the number of
|
|
programmable interface blocks available in hardware.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-mixer-blend-op-off:
|
|
description: |
|
|
Array of offset addresses for the available
|
|
blending stages. The offsets are relative to
|
|
qcom,sde-mixer-off.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-mixer-pair-mask:
|
|
description: |
|
|
Array of mixer numbers that can be paired with
|
|
mixer number corresponding to the array index.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
clock-rate:
|
|
description: List of clock rates in Hz.
|
|
|
|
clock-max-rate:
|
|
description: List of maximum clock rate in Hz that this device supports.
|
|
|
|
clock-mmrm:
|
|
description: |
|
|
List of clocks that enable setting the clk rate through MMRM driver.
|
|
The order of the list must match the 'clocks' and 'clock-names' properties.
|
|
The 'DISP_CC' ID of the clock must be used to enable the property for the
|
|
respective clock, whereas a value of zero disables the property.
|
|
|
|
qcom,platform-supply-entries:
|
|
description: |
|
|
A node that lists the elements of the supply. There
|
|
can be more than one instance of this binding,
|
|
in which case the entry would be appended with
|
|
the supply entry index.
|
|
e.g. qcom,platform-supply-entry@0
|
|
type: object
|
|
patternProperties:
|
|
"qcom,platform\-supply\-entry\@+\w":
|
|
properties:
|
|
reg:
|
|
description: offset and length of the register set for the device.
|
|
qcom,supply-name:
|
|
description: name of the supply (vdd/vdda/vddio)
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
qcom,supply-min-voltage:
|
|
description: minimum voltage level (uV)
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,supply-max-voltage:
|
|
description: maximum voltage level (uV)
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,supply-enable-load:
|
|
description: load drawn (uA) from enabled supply
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,supply-disable-load:
|
|
description: load drawn (uA) from disabled supply
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,supply-pre-on-sleep:
|
|
description: time to sleep (ms) before turning on
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,supply-post-on-sleep:
|
|
description: time to sleep (ms) after turning on
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,supply-pre-off-sleep:
|
|
description: time to sleep (ms) before turning off
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,supply-post-off-sleep:
|
|
description: time to sleep (ms) after turning off
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-hw-version:
|
|
description: A u32 value indicates the MDSS hw version
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,hw-fence-sw-version:
|
|
description: |
|
|
A u32 value to indicate the hw fencing version. If set to a value
|
|
greather than zero, driver will attempt to enable the feature (if
|
|
supported by the HW). Otherwise, if this value is not set or set
|
|
to zero, feature will remain disabled.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-sspp-src-size:
|
|
description: A u32 value indicates the address range for each sspp.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-mixer-size:
|
|
description: A u32 value indicates the address range for each mixer.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-ctl-size:
|
|
description: A u32 value indicates the address range for each ctl.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-size:
|
|
description: A u32 value indicates the address range for each dspp.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-intf-size:
|
|
description: A u32 value indicates the address range for each intf.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dsc-size:
|
|
description: A u32 value indicates the address range for each dsc.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-vdc-size:
|
|
description: A u32 value indicates the address range for each vdc.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-cdm-size:
|
|
description: A u32 value indicates the address range for each cdm.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-pp-size:
|
|
description: A u32 value indicates the address range for each pingpong.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-merge-3d-size:
|
|
description: A u32 value indicates the address range for each merge 3d.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-pp-cwb:
|
|
description: |
|
|
Array of u32 flags indicating whether each ping pong
|
|
block may be configured as a cwb pp block.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-wb-size:
|
|
description: A u32 value indicates the address range for each writeback.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-len:
|
|
description: A u32 entry for SDE address range.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-intf-max-prefetch-lines:
|
|
description: Array of u32 values for max prefetch lines on each interface.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-sspp-linewidth:
|
|
description: A u32 value indicates the max sspp line width.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-vig-sspp-linewidth:
|
|
description: A u32 value indicates the max vig sspp line width.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-scaling-linewidth:
|
|
description: A u32 value indicates the max vig source pipe line width for scaling purposes.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-mixer-linewidth:
|
|
description: A u32 value indicates the max mixer line width.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-wb-linewidth:
|
|
description: A u32 value indicates the max writeback line width.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-wb-linewidth-linear:
|
|
description: A u32 value indicates the max line width supported by WB for linear color formats.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-sspp-scale-size:
|
|
description: A u32 value indicates the scaling block size on sspp.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-mixer-blendstages:
|
|
description: A u32 value indicates the max mixer blend stages for alpha blending.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-qseed-sw-lib-rev:
|
|
description: |
|
|
A string entry indicates qseed sw library revision
|
|
supporting the qseed HW block. It supports
|
|
"qseedv3", "qseedv3lite" and "qseedv2" entries for qseed
|
|
revision. By default "qseedv2" is used if this
|
|
optional property is not defined.
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
default: qseedv2
|
|
|
|
qcom,sde-qseed-scalar-version:
|
|
description: A u32 value indicating the HW version of the QSEED hardware block.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-csc-type:
|
|
description: |
|
|
A string entry indicates csc support on sspp and wb.
|
|
It supports "csc" and "csc-10bit" entries for csc
|
|
type.
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
enum: [csc, csc-10bit]
|
|
|
|
qcom,sde-highest-bank-bit:
|
|
description: |
|
|
Property to specify GPU/Camera/Video highest memory
|
|
bank bit used for tile format buffers. First value
|
|
in the array represents the ddr type and the second
|
|
value is the hbb value corresponding to the ddr type.
|
|
|
|
qcom,sde-ubwc-version:
|
|
description: |
|
|
Property to specify the UBWC feature version. A u32 UBWC version is based on
|
|
MDSS support.
|
|
|
|
qcom,sde-ubwc-static:
|
|
description: Property to specify the default UBWC static configuration value.
|
|
|
|
qcom,sde-ubwc-bw-calc-version:
|
|
description: A u32 property to specify version of UBWC bandwidth calculation algorithm
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-ubwc-swizzle:
|
|
description: Property to specify the default UBWC swizzle configuration value.
|
|
|
|
qcom,sde-smart-panel-align-mode:
|
|
description: |
|
|
A u32 property to specify the align mode for
|
|
split display on smart panel. Possible values:
|
|
0x0 - no alignment
|
|
0xc - align at start of frame
|
|
0xd - align at start of line
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0x0, 0xc, 0xd]
|
|
|
|
qcom,sde-panic-per-pipe:
|
|
description: |
|
|
Boolean property to indicate if panic signal control feature is available on each
|
|
source pipe.
|
|
|
|
qcom,sde-has-src-split:
|
|
description: |
|
|
Boolean property to indicate if source split
|
|
feature is available or not.
|
|
|
|
qcom,sde-has-dim-layer:
|
|
description: |
|
|
Boolean property to indicate if mixer has dim layer
|
|
feature is available or not.
|
|
|
|
qcom,sde-has-idle-pc:
|
|
description: |
|
|
Boolean property to indicate if target has idle
|
|
power collapse feature available or not.
|
|
|
|
qcom,sde-wakeup-with-touch:
|
|
description: |
|
|
Boolean property to indicate if command mode display
|
|
will exit from power collapse based on display input
|
|
touch event or not.
|
|
|
|
qcom,sde-has-mixer-gc:
|
|
description: |
|
|
Boolean property to indicate if mixer has gamma correction
|
|
feature available or not.
|
|
|
|
qcom,sde-has-dest-scaler:
|
|
description: |
|
|
Boolean property to indicate if destination scaler
|
|
feature is available or not.
|
|
|
|
qcom,sde-max-dest-scaler-input-linewidth:
|
|
description: |
|
|
A u32 value indicates the
|
|
maximum input line width to destination scaler.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-max-dest-scaler-output-linewidth:
|
|
description: |
|
|
A u32 value indicates the
|
|
maximum output line width of destination scaler.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dest-scaler-top-off:
|
|
description: |
|
|
A u32 value provides the
|
|
offset from mdp base to destination scaler block.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dest-scaler-top-size:
|
|
description: A u32 value indicates the address range for ds top
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dest-scaler-off:
|
|
description: |
|
|
Array of u32 offsets indicate the qseed3 scaler blocks
|
|
offset from destination scaler top offset.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dest-scaler-size:
|
|
description: A u32 value indicates the address range for each scaler block
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-sspp-clk-ctrl:
|
|
description: |
|
|
Array of offsets describing clk control
|
|
offsets for dynamic clock gating. 1st value
|
|
in the array represents offset of the control
|
|
register. 2nd value represents bit offset within
|
|
control register. Number of offsets defined should
|
|
match the number of offsets defined in
|
|
property: qcom,sde-sspp-off
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-sspp-clk-status:
|
|
description: |
|
|
Array of offsets describing clk status
|
|
offsets for clock active state. 1st value
|
|
in the array represents offset of the status
|
|
register. 2nd value represents bit offset within
|
|
status register. Number of offsets defined should
|
|
match the number of offsets defined in
|
|
property: qcom,sde-sspp-off.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-sspp-excl-rect:
|
|
description: |
|
|
Array of u32 values indicating exclusion rectangle
|
|
support on each sspp.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-sspp-smart-dma-priority:
|
|
description: |
|
|
Array of u32 values indicating hw pipe
|
|
priority of secondary rectangles when smart dma
|
|
is supported. Number of priority values should
|
|
match the number of offsets defined in
|
|
qcom,sde-sspp-off node. Zero indicates no support
|
|
for smart dma for the sspp.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-smart-dma-rev:
|
|
description: |
|
|
A string entry indicating the smart dma version
|
|
supported on the device. Supported entries are
|
|
"smart_dma_v1" and "smart_dma_v2".
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
enum: [smart_dma_v1, smart_dma_v2]
|
|
|
|
qcom,sde-vdc-hw-rev:
|
|
description: A string indicating the hw version of vdc.
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
|
|
qcom,sde-intf-type:
|
|
description: |
|
|
Array of string provides the interface type information.
|
|
Possible string values
|
|
"dsi" - dsi display interface
|
|
"dp" - Display Port interface
|
|
"hdmi" - HDMI display interface
|
|
An interface is considered as "none" if interface type
|
|
is not defined.
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
default: none
|
|
enum: [dsi, dp, hdmi]
|
|
|
|
qcom,sde-intf-tear-irq-off:
|
|
description: |
|
|
Array of offset addresses for the available
|
|
tear effect (TE) IRQ blocks from "mdp_phys".
|
|
There should be one entry per INTF instance with
|
|
a zero value for INTFs without TE IRQ block.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-emulated-env:
|
|
description: |
|
|
Boolean property to indicate if the MDSS is running in an
|
|
emulated environment.
|
|
|
|
qcom,sde-off:
|
|
description: SDE offset from "mdp_phys" defined in reg property.
|
|
|
|
qcom,sde-cdm-off:
|
|
description: |
|
|
Array of offset addresses for the available
|
|
cdm blocks. These offsets will be calculated from
|
|
register "mdp_phys" defined in reg property.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-vbif-off:
|
|
description: |
|
|
Array of offset addresses for the available
|
|
vbif blocks. These offsets will be calculated from
|
|
register "vbif_phys" defined in reg property.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-vbif-size:
|
|
description: A u32 value indicates the vbif block address range.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-uidle-off:
|
|
description: |
|
|
A u32 value with the offset for the uidle block, from the "mdp_phys".
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-uidle-size:
|
|
description: A u32 value indicates the uidle block address range.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-te-off:
|
|
description: |
|
|
A u32 offset indicates the te block offset on pingpong.
|
|
This offset is 0x0 by default.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-te2-off:
|
|
description: A u32 offset indicates the te2 block offset on pingpong.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-te-size:
|
|
description: A u32 value indicates the te block address range.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-te2-size:
|
|
description: A u32 value indicates the te2 block address range.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dsc-off:
|
|
description: |
|
|
Array of offset addresses for the available dsc
|
|
blocks. These offsets are calculated from
|
|
register "mdp_phys" defined in reg property.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dsc-hw-rev:
|
|
description: A string value indicates the dsc hw block version.
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
|
|
qcom,sde-dsc-enc:
|
|
description: |
|
|
Array of offset addresses for the available dsc
|
|
encoder blocks. These offsets are calculated from
|
|
the corresponding DSC base.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dsc-enc-size:
|
|
description: A u32 value indicates the enc block offset range.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dsc-ctl:
|
|
description: |
|
|
Array of offset addresses for the available dsc
|
|
ctl blocks. These offsets are calculated from
|
|
the corresponding DSC base.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dsc-ctl-size:
|
|
description: A u32 value indicates the ctl block offset range.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dsc-native422-supp:
|
|
description: |
|
|
Array of flags indicating whether corresponding dsc
|
|
block can support native 422 and native 420
|
|
encoding.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dsc-linewidth:
|
|
description: A u32 value indicates the max dsc line width.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-vdc-off:
|
|
description: |
|
|
A u32 offset address for the available vdc blocks.
|
|
This offset is calculated from register "mdp_phys"
|
|
defined in reg property.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-vdc-enc-size:
|
|
description: A u32 value indicates the enc block offset range.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-vdc-enc:
|
|
description: |
|
|
A u32 offset address for the vdc encoder block. This offset is
|
|
calculated from qcom,sde-vdc-off.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-vdc-ctl:
|
|
description: |
|
|
A u32 offset address for the vdc ctl block. This offset is
|
|
calculated from qcom,sde-vdc-off.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-vdc-ctl-size:
|
|
description: A u32 value indicates the ctl block offset range.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-qdss-off:
|
|
description: A u32 offset indicates the qdss block offset.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dither-off:
|
|
description: A u32 offset indicates the dither block offset on pingpong.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dither-version:
|
|
description: A u32 value indicates the dither block version.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dither-size:
|
|
description: A u32 value indicates the dither block address range.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-cwb-dither:
|
|
description: |
|
|
Array of u32 flags indicating whether each dither block
|
|
may be configured as a cwb dither block.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-sspp-vig-blocks:
|
|
description: |
|
|
A node that lists the blocks inside the VIG hardware. There can
|
|
be more than one instance of this binding, in which case the
|
|
entry would be appended with the vcm entry index. Each entry will
|
|
contain the offset and version (if needed) of each feature block.
|
|
The presence of a block entry indicates that the SSPP VIG contains
|
|
that feature hardware. Eg: vcm@0
|
|
type: object
|
|
patternProperties:
|
|
"vcm@+\w":
|
|
properties:
|
|
cell-index:
|
|
description: A u32 index for the sub-block.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-vig-top-off:
|
|
description: A u32 offset of the sub-block top.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-vig-csc-off:
|
|
description: offset of CSC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-vig-qseed-off:
|
|
description: offset of QSEED hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-vig-qseed-size:
|
|
description: A u32 address range for qseed scaler.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-vig-pcc:
|
|
description: offset and version of PCC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-vig-hsic:
|
|
description: offset and version of global PA adjustment
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-vig-memcolor:
|
|
description: offset and version of PA memcolor hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-vig-gamut:
|
|
description: offset and version of 3D LUT Gamut hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-vig-igc:
|
|
description: offset and version of 1D LUT IGC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-vig-inverse-pma:
|
|
description: |
|
|
Boolean property to indicate if inverse PMA feature is
|
|
available on VIG pipe
|
|
qcom,sde-fp16-igc:
|
|
description: u32 offset and version of the FP16 IGC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-fp16-unmult:
|
|
description: u32 offset and version of the FP16 Unmult hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-fp16-gc:
|
|
description: u32 offset and version of the FP16 GC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-fp16-csc:
|
|
description: u32 offset and version of the FP16 CSC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-ucsc-igc:
|
|
description: u32 offset and version of the UCSC IGC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-ucsc-unmult:
|
|
description: u32 offset and version of the UCSC Unmult hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-ucsc-gc:
|
|
description: u32 offset and version of the UCSC GC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-ucsc-csc:
|
|
description: u32 offset and version of the UCSC CSC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-ucsc-alpha-dither:
|
|
description: u32 offset and version of the UCSC Alpha Dither hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-sspp-dma-blocks:
|
|
description: |
|
|
A node that lists the blocks inside the DMA hardware. There
|
|
can be more than one instance of this binding, in which case the
|
|
entry would be appended with dgm entry index. Each entry will
|
|
contain the offset and version (if needed) of each feature block.
|
|
The presence of a block entry indicates that the SSPP DMA contains
|
|
that feature hardware.
|
|
e.g. qcom,sde-sspp-dma-blocks
|
|
-- dgm@0
|
|
type: object
|
|
patternProperties:
|
|
"dgm@+\w":
|
|
properties:
|
|
cell-index:
|
|
description: A u32 index for the sub-block.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-dma-top-off:
|
|
description: A u32 offset of the sub-block top.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-dma-igc:
|
|
description: offset and version of DMA IGC
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-dma-gc:
|
|
description: offset and version of DMA GC
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-dma-inverse-pma:
|
|
description: |
|
|
Boolean property to indicate if inverse PMA feature is
|
|
available on DMA pipe.
|
|
qcom,sde-dma-csc-off:
|
|
description: offset of CSC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-fp16-igc:
|
|
description: u32 offset and version of the FP16 IGC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-fp16-unmult:
|
|
description: u32 offset and version of the FP16 Unmult hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-fp16-gc:
|
|
description: u32 offset and version of the FP16 GC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-fp16-csc:
|
|
description: u32 offset and version of the FP16 CSC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-ucsc-igc:
|
|
description: u32 offset and version of the UCSC IGC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-ucsc-unmult:
|
|
description: u32 offset and version of the UCSC Unmult hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-ucsc-gc:
|
|
description: u32 offset and version of the UCSC GC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-ucsc-csc:
|
|
description: u32 offset and version of the UCSC CSC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-ucsc-alpha-dither:
|
|
description: u32 offset and version of the UCSC Alpha Dither hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-sspp-rgb-blocks:
|
|
description: |
|
|
A node that lists the blocks inside the RGB hardware. The
|
|
block entries will contain the offset and version (if needed)
|
|
of each feature block. The presence of a block entry
|
|
indicates that the SSPP RGB contains that feature hardware.
|
|
e.g. qcom,sde-sspp-rgb-blocks
|
|
type: object
|
|
properties:
|
|
qcom,sde-rgb-scaler-off:
|
|
description: offset of RGB scaler hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-rgb-scaler-size:
|
|
description: A u32 address range for scaler.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-rgb-pcc:
|
|
description: offset and version of PCC hardware.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-blocks:
|
|
description: |
|
|
A node that lists the blocks inside the DSPP hardware. The
|
|
block entries will contain the offset and version of each
|
|
feature block. The presence of a block entry indicates that
|
|
the DSPP contains that feature hardware.
|
|
e.g. qcom,sde-dspp-blocks
|
|
type: object
|
|
properties:
|
|
qcom,sde-dspp-pcc:
|
|
description: offset and version of PCC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-dspp-gc:
|
|
description: offset and version of GC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-dspp-igc:
|
|
description: offset and version of IGC hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-dspp-hsic:
|
|
description: offset and version of global PA adjustment
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-dspp-memcolor:
|
|
description: offset and version of PA memcolor hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-dspp-sixzone:
|
|
description: offset and version of PA sixzone hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-dspp-gamut:
|
|
description: offset and version of Gamut mapping hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-dspp-dither:
|
|
description: offset and version of dither hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-dspp-hist:
|
|
description: offset and version of histogram hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
qcom,sde-dspp-vlut:
|
|
description: offset and version of PA vLUT hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-mixer-blocks:
|
|
description: |
|
|
A node that lists the blocks inside the layer mixer hardware. The
|
|
block entries will contain the offset and version (if needed)
|
|
of each feature block. The presence of a block entry
|
|
indicates that the layer mixer contains that feature hardware.
|
|
e.g. qcom,sde-mixer-blocks
|
|
- qcom,sde-mixer-gc: offset and version of mixer GC hardware
|
|
|
|
qcom,sde-dspp-ad-off:
|
|
description: |
|
|
Array of u32 offsets indicate the ad block offset from the
|
|
DSPP offset. Since AD hardware is represented as part of
|
|
DSPP block, the AD offsets must be offset from the
|
|
corresponding DSPP base.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dspp-ad-version:
|
|
description: A u32 value indicating the version of the AD hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-ltm-version:
|
|
description: |
|
|
A u32 value indicating the major(upper 16 bits) and minor(lower 16 bits)
|
|
version of the LTM hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-ltm-off:
|
|
description: |
|
|
Array of u32 offsets indicate the LTM block offsets from the
|
|
DSPP offsets. Since LTM hardware is represented as part of
|
|
DSPP block, the LTM offsets are calculated based on the
|
|
corresponding DSPP base.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dspp-rc-version:
|
|
description: A u32 value indicating the version of the RC hardware.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-rc-off:
|
|
description: |
|
|
Array of u32 offsets indicate the RC block offsets from the
|
|
DSPP offsets. Since RC hardware is represented as part of
|
|
DSPP block, the RC offsets are calculated based on the
|
|
corresponding DSPP base.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-rc-size:
|
|
description: A u32 value indicating the RC block address range.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-rc-mem-size:
|
|
description: A u32 value indicating the RC block shared memory size.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-rc-min-region-width:
|
|
description: A u32 value indicating the RC block minimum region width.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-spr-off:
|
|
description: |
|
|
Array of u32 offsets indicate the SPR block offsets from the
|
|
corresponding DSPP block offset as base.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dspp-spr-size:
|
|
description: A u32 value indicating the SPR block register address range
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-spr-version:
|
|
description: A u32 value indicating the version of SPR hardware.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-demura-off:
|
|
description: |
|
|
Array of u32 offsets indicate the demura block offsets from the
|
|
corresponding DSPP block offset as base.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dspp-demura-size:
|
|
description: A u32 value indicating the demura block register address range
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-demura-version:
|
|
description: A u32 value indicating the version of demura hardware.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-aiqe-off:
|
|
description: |
|
|
Array of u32 values indicating the offset of each AIQE block
|
|
relative to its parent DSPP block.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dspp-aiqe-version:
|
|
description: A u32 value indicating the version of the AIQE hardware.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-aiqe-size:
|
|
description: |
|
|
A u32 value indicating the shared memory size of each AIQE
|
|
hardware block instance.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-aiqe-dither-off:
|
|
description: |
|
|
Array of u32 values indicating the offset of each AIQE
|
|
dither block relative to its parent DSPP block.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dspp-aiqe-dither-version:
|
|
description: A u32 value indicating the version of the AIQE dither hardware.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-aiqe-dither-size:
|
|
description: |
|
|
A u32 value indicating the shared memory size of each AIQE
|
|
dither hardware block instance.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-aiqe-wrapper-off:
|
|
description: |
|
|
Array of u32 values indicating the offset of each AIQE
|
|
wrapper block relative to its parent DSPP block.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dspp-aiqe-wrapper-version:
|
|
description: A u32 value indicating the version of the AIQE wrapper hardware.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-aiqe-wrapper-size:
|
|
description: |
|
|
A u32 value indicating the shared memory size of each AIQE
|
|
wrapper hardware block instance.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-aiqe-aiscaler-off:
|
|
description: |
|
|
Array of u32 values indicating the offset of each AIQE
|
|
AI Scaler block relative to its parent DSPP block.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dspp-aiqe-aiscaler-version:
|
|
description: A u32 value indicating the version of the AIQE AI Scaler hardware.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dspp-aiqe-aiscaler-size:
|
|
description: |
|
|
A u32 value indicating the shared memory size of each AIQE
|
|
AI Scaler hardware block instance.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-aiqe-has-feature-mdnie:
|
|
description: Boolean property indicating the presence of AIQE feature mDNIe hardware.
|
|
|
|
qcom,sde-aiqe-has-feature-abc:
|
|
description: Boolean property indicating the presence of AIQE feature ABC hardware.
|
|
|
|
qcom,sde-aiqe-has-feature-ssrc:
|
|
description: Boolean property indicating the presence of AIQE feature SSRC hardware.
|
|
|
|
qcom,sde-aiqe-has-feature-copr:
|
|
description: Boolean property indicating the presence of AIQE feature COPR hardware.
|
|
|
|
qcom,sde-aiqe-has-feature-aiscaler:
|
|
description: Boolean property indicating the presence of AIQE feature AI Scaler hardware.
|
|
|
|
qcom,sde-lm-noise-off:
|
|
description: A u32 value indicating noise layer offset from mixer base.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-lm-noise-version:
|
|
description: A u32 value indicating the noise layer version.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-vbif-id:
|
|
description: |
|
|
Array of vbif ids corresponding to the
|
|
offsets defined in property: qcom,sde-vbif-off.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-vbif-default-ot-rd-limit:
|
|
description: A u32 value indicates the default read OT limit
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-vbif-default-ot-wr-limit:
|
|
description: A u32 value indicates the default write OT limit
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-vbif-dynamic-ot-rd-limit:
|
|
description: |
|
|
A series of 2 cell property, with a format
|
|
of (pps, OT limit), where pps is pixel per second and
|
|
OT limit is the read limit to apply if the given
|
|
pps is not exceeded.
|
|
|
|
qcom,sde-vbif-dynamic-ot-wr-limit:
|
|
description: |
|
|
A series of 2 cell property, with a format
|
|
of (pps, OT limit), where pps is pixel per second and
|
|
OT limit is the write limit to apply if the given
|
|
pps is not exceeded.
|
|
|
|
qcom,sde-vbif-memtype-0:
|
|
description: Array of u32 vbif memory type settings, group 0
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-vbif-memtype-1:
|
|
description: Array of u32 vbif memory type settings, group 1
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-wb-id:
|
|
description: |
|
|
Array of writeback ids corresponding to the
|
|
offsets defined in property: qcom,sde-wb-off.
|
|
|
|
qcom,sde-wb-clk-ctrl:
|
|
description: |
|
|
Array of 2 cell property describing clk control
|
|
offsets for dynamic clock gating. 1st value
|
|
in the array represents offset of the control
|
|
register. 2nd value represents bit offset within
|
|
control register. Number of offsets defined should
|
|
match the number of offsets defined in
|
|
property: qcom,sde-wb-off
|
|
|
|
qcom,sde-wb-clk-status:
|
|
description: |
|
|
Array of 2 cell property describing clk status
|
|
offsets for clock active state. 1st value
|
|
in the array represents offset of the status
|
|
register. 2nd value represents bit offset within
|
|
status register. Number of offsets defined should
|
|
match the number of offsets defined in
|
|
property: qcom,sde-wb-off
|
|
|
|
qcom,sde-reg-dma-off:
|
|
description: |
|
|
Array of u32 offset addresses of the dma hardware blocks,
|
|
relative to "regdma_phys" defined in reg property.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-reg-dma-id:
|
|
description: |
|
|
Array of u32 DMA block type ids corresponding to the
|
|
offsets declared in property: qcom,sde-reg-dma-off
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-reg-dma-version:
|
|
description: Version of the reg dma hardware blocks.
|
|
|
|
qcom,sde-reg-dma-trigger-off:
|
|
description: |
|
|
Offset of the lut dma trigger reg from "mdp_phys"
|
|
defined in reg property.
|
|
|
|
qcom,sde-reg-dma-broadcast-disabled:
|
|
description: |
|
|
Boolean property to indicate if broadcast
|
|
functionality in the register dma hardware block should be used.
|
|
|
|
qcom,sde-reg-dma-xin-id:
|
|
description: VBIF clients id (xin) corresponding to the LUTDMA block.
|
|
|
|
qcom,sde-reg-dma-clk-ctrl:
|
|
description: |
|
|
Array of 2 cell property describing clk control
|
|
offsets for dynamic clock gating. 1st value
|
|
in the array represents offset of the control
|
|
register. 2nd value represents bit offset within
|
|
control register.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
items:
|
|
- description: offset of the control register
|
|
- description: bit offset within the control register
|
|
|
|
qcom,sde-dram-channels:
|
|
description: This represents the number of channels in the Bus memory controller.
|
|
|
|
qcom,sde-num-nrt-paths:
|
|
description: |
|
|
Integer property represents the number of non-realtime
|
|
paths in each Bus Scaling Usecase. This value depends on
|
|
number of AXI ports that are dedicated to non-realtime VBIF
|
|
for particular chipset.
|
|
These paths must be defined after rt-paths in
|
|
"qcom,msm-bus,vectors-KBps" vector request.
|
|
|
|
qcom,sde-max-bw-low-kbps:
|
|
description: |
|
|
This value indicates the max bandwidth in Kbps
|
|
that can be supported without underflow.
|
|
This is a low bandwidth threshold which should
|
|
be applied in most scenarios to be safe from
|
|
underflows when unable to satisfy bandwidth
|
|
requirements.
|
|
|
|
qcom,sde-max-bw-high-kbps:
|
|
description: |
|
|
This value indicates the max bandwidth in Kbps
|
|
that can be supported without underflow in the
|
|
event where there is no VFE.
|
|
This is a high bandwidth threshold which can be
|
|
applied in scenarios where panel interface can
|
|
be more tolerant to memory latency such as
|
|
command mode panels.
|
|
|
|
qcom,sde-core-ib-ff:
|
|
description: A string entry indicating the fudge factor for core ib calculation.
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
|
|
qcom,sde-core-clk-ff:
|
|
description: |
|
|
A string entry indicating the fudge factor for
|
|
core clock calculation.
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
|
|
qcom,sde-min-core-ib-kbps:
|
|
description: |
|
|
This u32 value indicates the minimum mnoc ib
|
|
vote in Kbps that can be reduced without hitting underflow.
|
|
BW calculation logic will choose the IB bandwidth requirement
|
|
based on usecase if this floor value is not defined.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-min-llcc-ib-kbps:
|
|
description: |
|
|
This u32 value indicates the minimum llcc ib
|
|
vote in Kbps that can be reduced without hitting underflow.
|
|
BW calculation logic will choose the IB bandwidth requirement
|
|
based on usecase if this floor value is not defined.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-min-dram-ib-kbps:
|
|
description: |
|
|
This u32 value indicates the minimum dram ib
|
|
vote in Kbps that can be reduced without hitting underflow.
|
|
BW calculation logic will choose the IB bandwidth requirement
|
|
based on usecase if this floor value is not defined.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-comp-ratio-rt:
|
|
description: |
|
|
A string entry indicating the compression ratio
|
|
for each supported compressed format on realtime interface.
|
|
The string is composed of one or more of
|
|
<fourcc code>/<vendor code>/<modifier>/<compression ratio>
|
|
separated with spaces.
|
|
|
|
qcom,sde-comp-ratio-nrt:
|
|
description: |
|
|
A string entry indicating the compression ratio
|
|
for each supported compressed format on non-realtime interface.
|
|
The string is composed of one or more of
|
|
<fourcc code>/<vendor code>/<modifier>/<compression ratio>
|
|
separated with spaces.
|
|
|
|
qcom,sde-undersized-prefill-lines:
|
|
description: A u32 value indicates the size of undersized prefill in lines.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-xtra-prefill-lines:
|
|
description: A u32 value indicates the extra prefill in lines.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dest-scale-prefill-lines:
|
|
description: A u32 value indicates the latency of destination scaler in lines.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-macrotile-prefill-lines:
|
|
description: A u32 value indicates the latency of macrotile in lines.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-yuv-nv12-prefill-lines:
|
|
description: A u32 value indicates the latency of yuv/nv12 in lines.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-linear-prefill-lines:
|
|
description: A u32 value indicates the latency of linear in lines.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-downscaling-prefill-lines:
|
|
description: A u32 value indicates the latency of downscaling in lines.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-max-per-pipe-bw-kbps:
|
|
description: Array of u32 value indicates the max per pipe bandwidth in Kbps.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-amortizable-threshold:
|
|
description: This value indicates the min for traffic shaping in lines.
|
|
|
|
qcom,sde-vbif-qos-rt-remap:
|
|
description: |
|
|
This u32 array is used to program vbif qos remapper register
|
|
priority for realtime clients. First 8 entries are for rp_remap and
|
|
the next 8 entries are for lvl_remap.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-vbif-qos-nrt-remap:
|
|
description: |
|
|
This u32 array is used to program vbif qos remapper register
|
|
priority for non-realtime clients. First 8 entries are for rp_remap and
|
|
the next 8 entries are for lvl_remap.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-vbif-qos-cwb-remap:
|
|
description: |
|
|
This u32 array is used to program vbif qos remapper register
|
|
priority for concurrent writeback clients. First 8 entries are
|
|
for rp_remap and the next 8 entries are for lvl_remap.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-vbif-qos-lutdma-remap:
|
|
description: |
|
|
This u32 array is used to program vbif qos remapper register
|
|
priority for lutdma client. First 8 entries are for rp_remap and
|
|
the next 8 entries are for lvl_remap.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-vbif-qos-cnoc-remap:
|
|
description: |
|
|
This u32 array is used to program vbif qos remapper register
|
|
priority for cnoc clients. First 8 entries are for rp_remap and
|
|
the next 8 entries are for lvl_remap.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-vbif-qos-offline-wb-remap:
|
|
description: |
|
|
This u32 array is used to program vbif qos remapper register
|
|
priority for offline-wb clients. First 8 entries are for rp_remap
|
|
and the next 8 entries are for lvl_remap.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-vbif-qos-wb-rot-remap:
|
|
description: |
|
|
This u32 array is used to program vbif qos remapper register
|
|
priority for wb-rotation clients. First 8 entries are for rp_remap
|
|
and the next 8 entries are for lvl_remap.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-qos-refresh-rates:
|
|
description: |
|
|
This u32 array indicates danger, safe and creq luts
|
|
qos configuration for different refresh rates.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-danger-lut:
|
|
description: |
|
|
This u32 array of 18 cell property, with a format of
|
|
<portrait-panel, landscape-panel> for each entry,
|
|
<linear, tile, nrt, cwb-linear, cwb-tile, inline, inline-restricted,
|
|
offline-wb, wb_rotate>, indicating the danger luts on sspp and wb.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-safe-lut:
|
|
description: |
|
|
This u32 array of 18 cell property, with a format of
|
|
<portrait-panel, landscape-panel> for each entry,
|
|
<linear, tile, nrt, cwb-linear, cwb-tile, inline, inline-restricted,
|
|
offline-wb, wb_rotate>, indicating the safe luts on sspp and wb.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-creq-lut:
|
|
description: |
|
|
This u64 array of 18 cell property, with a format of
|
|
<lut hi, lut lo, lut hi with-qseed, lut lo with-qseed> for each
|
|
entry, for qos cases from <linear, tile, nrt, cwb-linear, cwb-tile,
|
|
inline, inline-restricted, offline-wb, wb_rotate>, with of-node count based
|
|
on the qos refresh rates count.
|
|
$ref: /schemas/types.yaml#/definitions/uint64-array
|
|
|
|
qcom,sde-cdp-setting:
|
|
description: |
|
|
Array of 2 cell property, with a format of
|
|
<read enable, write enable> for cdp use cases in
|
|
order of <real_time>, and <non_real_time>.
|
|
|
|
qcom,sde-qos-cpu-mask:
|
|
description: A u32 value indicating desired PM QoS CPU affine mask.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-qos-cpu-mask-performance:
|
|
description: |
|
|
Each bit represents a CPU mask. For example
|
|
0xf represents 4 cpu cores. These cores can be
|
|
silver or gold or gold+.
|
|
|
|
qcom,sde-qos-cpu-dma-latency:
|
|
description: A u32 value indicating desired PM QoS CPU DMA latency in usec.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-qos-cpu-irq-latency:
|
|
description: A u32 value indicating desired PM QoS CPU irq latency in usec.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-ipcc-protocol-id:
|
|
description: A u32 value indicating ipcc protocol id used for hw fencing feature.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-ipcc-client-dpu-phys-id:
|
|
description: |
|
|
A u32 value indicating ipcc physical client id of dpu used
|
|
for ipcc registers access.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-inline-rot-xin:
|
|
description: An integer array of xin-ids related to inline rotation.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-inline-rot-xin-type:
|
|
description: |
|
|
A string array indicating the type of xin,
|
|
namely sspp or wb. Number of entries should match
|
|
the number of xin-ids defined in
|
|
property: qcom,sde-inline-rot-xin
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
enum: [sspp, wb]
|
|
|
|
qcom,sde-inline-rot-clk-ctrl:
|
|
description: |
|
|
Array of offsets describing clk control
|
|
offsets for dynamic clock gating. 1st value
|
|
in the array represents offset of the control
|
|
register. 2nd value represents bit offset within
|
|
control register. Number of offsets defined should
|
|
match the number of xin-ids defined in
|
|
property: qcom,sde-inline-rot-xin
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-secure-sid-mask:
|
|
description: Array of secure SID masks used during secure-camera/secure-display usecases.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
'#power-domain-cells':
|
|
description: Number of cells in a power-domain specifier and should contain 0.
|
|
|
|
'#list-cells':
|
|
description: Number of mdp cells, must be 1.
|
|
|
|
qcom,sde-mixer-display-pref:
|
|
description: |
|
|
A string array indicating the preferred display type
|
|
for the mixer block. Possible values:
|
|
"primary" - preferred for primary display
|
|
"none" - no preference on display
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
enum: [primary, none]
|
|
|
|
qcom,sde-mixer-cwb-pref:
|
|
description: |
|
|
A string array indicating the preferred mixer block.
|
|
for CWB. Possible values:
|
|
"cwb" - preferred for cwb
|
|
"none" - no preference on display
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
enum: [cwb, none]
|
|
|
|
qcom,sde-mixer-dcwb-pref:
|
|
description: |
|
|
A string array indicating the preferred mixer block.
|
|
for Dedicated-CWB. Possible values:
|
|
"dcwb" - preferred for dedicated-cwb
|
|
"none" - no preference on display
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
enum: [dcwb, none]
|
|
|
|
qcom,sde-ctl-display-pref:
|
|
description: |
|
|
A string array indicating the preferred display type
|
|
for the ctl block. Possible values:
|
|
"primary" - preferred for primary display
|
|
"none" - no preference on display
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
enum: [primary, none]
|
|
|
|
qcom,sde-pipe-order-version:
|
|
description: |
|
|
A u32 property to indicate version of pipe
|
|
ordering block
|
|
0: lower priority pipe has to be on the left for a given pair of pipes.
|
|
1: priority have to be explicitly configured for a given pair of pipes.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
qcom,sde-trusted-vm-env:
|
|
description: |
|
|
Boolean property to indicate if the device
|
|
driver is executing in a trusted VM
|
|
|
|
qcom,sde-max-trusted-vm-displays:
|
|
description: |
|
|
A u32 property to indicate the maximum
|
|
number of concurrent displays supported in the
|
|
trusted vm environment
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-vm-exclude-reg-names:
|
|
description: |
|
|
A string array indicating the reg-names which
|
|
should be excluded from IO memory validation list
|
|
in trusted vm environment
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
|
|
qcom,tvm-include-reg:
|
|
description: |
|
|
An array of u32 tuplets indicating the address
|
|
ranges of the display sub-device registers
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,vram-size:
|
|
description: A u32 value indicating the size of the VRAM in bytes
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,pmic-arb-address:
|
|
description: |
|
|
A u32 array of display related SPMI address
|
|
bit mask, which is a combination of SID and pheripheral id's.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-ib-bw-vote:
|
|
description: |
|
|
A u32 array of IB bandwidth vote values in kbps for
|
|
MNOC, LLCC and DDR/EBI respectively.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dnsc-blur-version:
|
|
description: A u32 value indicating the downscale blur version
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dnsc-blur-off:
|
|
description: |
|
|
An array of u32 values with the offset for the downscale blur
|
|
block, from the "mdp_phys".
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dnsc-blur-size:
|
|
description: A u32 value indicates the downscale blur block address range.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dnsc-blur-gaus-lut-off:
|
|
description: |
|
|
An array of u32 values with the offset for gaussian LUT
|
|
block, from the dnsc-blur-off
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dnsc-blur-gaus-lut-size:
|
|
description: A u32 value indicates the gaussian LUT block address range.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,sde-dnsc-blur-dither-off:
|
|
description: |
|
|
An array of u32 values with the offset for dither
|
|
block, from the dnsc-blur-off
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
qcom,sde-dnsc-blur-dither-size:
|
|
description: A u32 value indicates the dither block address range.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
Bus Scaling:
|
|
interconnects:
|
|
description: |
|
|
An array of 4 cell properties with the format of
|
|
(src-noc master-id dst-noc slave-id) as described in:
|
|
Documentation/devicetree/bindings/interconnect/interconnect.txt
|
|
One entry for each interconnect path available.
|
|
Master/Slave ID bindings can be found at:
|
|
include/dt-bindings/interconnect/
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
interconnect-names:
|
|
description: |
|
|
An array of string properties associated with "interconnects"
|
|
each with a unique name used to lookup the respective path.
|
|
The following paths are currently supported: qcom,sde-reg-bus,
|
|
qcom,sde-data-bus0, qcom,sde-data-bus1, qcom,sde-llcc-bus,
|
|
qcom,sde-ebi-bus
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
|
|
qcom,sde-reg-bus,vectors-KBps:
|
|
description: |
|
|
A series of 2 cell properties with a format of
|
|
(ab, ib) specified in kilobytes-per-second.
|
|
Used when applying reg-bus votes and must be
|
|
given whenever "qcom,sde-reg-bus" is used.
|
|
|
|
qcom,sde-inline-rotator:
|
|
description: |
|
|
A 2 cell property, with format of (rotator phandle,
|
|
instance id), of inline rotator device.
|
|
|
|
patternProperties:
|
|
"qcom,smmu_sde_+\w":
|
|
description: Child nodes representing sde smmu virtual devices
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
compatible:
|
|
enum:
|
|
- qcom,smmu_sde_unsec:
|
|
description: smmu context bank device for unsecure sde real time domain.
|
|
- qcom,smmu_sde_sec:
|
|
description: smmu context bank device for secure sde real time domain.
|
|
- qcom,smmu_sde_nrt_unsec:
|
|
description: smmu context bank device for unsecure sde non-real time domain.
|
|
- qcom,smmu_sde_nrt_sec:
|
|
description: smmu context bank device for secure sde non-real time domain.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- reg-names
|
|
- clocks
|
|
- clock-names
|
|
- mmagic-supply
|
|
- vdd-supply
|
|
- interrupt-parent
|
|
- interrupts
|
|
- interrupt-controller
|
|
- '#interrupt-cells'
|
|
- iommus
|
|
- qcom,sde-sspp-type
|
|
- qcom,sde-sspp-off
|
|
- qcom,sde-sspp-xin-id
|
|
- qcom,sde-ctl-off
|
|
- qcom,sde-wb-off
|
|
- qcom,sde-wb-xin-id
|
|
- qcom,sde-mixer-off
|
|
- qcom,sde-dspp-top-off
|
|
- qcom,sde-dspp-off
|
|
- qcom,sde-pp-off
|
|
- qcom,sde-pp-slave
|
|
- qcom,sde-pp-merge-3d-id
|
|
- qcom,sde-merge-3d-off
|
|
- qcom,sde-intf-off
|
|
- qcom,sde-mixer-blend-op-off
|
|
- qcom,sde-mixer-pair-mask
|
|
|
|
examples:
|
|
- |
|
|
mdss_mdp: qcom,mdss_mdp@900000 {
|
|
compatible = "qcom,sde-kms";
|
|
reg = <0x00900000 0x90000>,
|
|
<0x009b0000 0x1040>,
|
|
<0x009b8000 0x1040>,
|
|
<0x0aeac000 0x00f0>;
|
|
reg-names = "mdp_phys",
|
|
"vbif_phys",
|
|
"vbif_nrt_phys",
|
|
"regdma_phys";
|
|
qcom,tvm-include-reg = <0xaf20000 0x4d68>,
|
|
<0xaf30000 0x3fd4>;
|
|
clocks = <&clock_mmss clk_mdss_ahb_clk>,
|
|
<&clock_mmss clk_mdss_axi_clk>,
|
|
<&clock_mmss clk_mdp_clk_src>,
|
|
<&clock_mmss clk_mdss_mdp_vote_clk>,
|
|
<&clock_mmss clk_smmu_mdp_axi_clk>,
|
|
<&clock_mmss clk_mmagic_mdss_axi_clk>,
|
|
<&clock_mmss clk_mdss_vsync_clk>;
|
|
clock-names = "iface_clk",
|
|
"bus_clk",
|
|
"core_clk_src",
|
|
"core_clk",
|
|
"iommu_clk",
|
|
"mmagic_clk",
|
|
"vsync_clk";
|
|
clock-rate = <0>, <0>, <0>;
|
|
clock-max-rate= <0 320000000 0>;
|
|
qcom,hw-fence-sw-version = <0x1>;
|
|
clock-mmrm = <0 0 DISP_CC_MDSS_MDP_CLK_SRC 0 0 0 0>;
|
|
mmagic-supply = <&gdsc_mmagic_mdss>;
|
|
vdd-supply = <&gdsc_mdss>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 83 0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
iommus = <&mdp_smmu 0>;
|
|
#power-domain-cells = <0>;
|
|
|
|
qcom,sde-hw-version = <0x70000000>;
|
|
qcom,sde-emulated-env;
|
|
qcom,sde-off = <0x1000>;
|
|
qcom,sde-ctl-off = <0x00002000 0x00002200 0x00002400
|
|
0x00002600 0x00002800>;
|
|
qcom,sde-ctl-display-pref = "primary", "none", "none",
|
|
"none", "none";
|
|
qcom,sde-mixer-off = <0x00045000 0x00046000
|
|
0x00047000 0x0004a000>;
|
|
qcom,sde-mixer-display-pref = "primary", "none",
|
|
"none", "none";
|
|
qcom,sde-mixer-cwb-pref = "none", "none",
|
|
"cwb", "none";
|
|
qcom,sde-dspp-top-off = <0x1300>;
|
|
qcom,sde-dspp-off = <0x00055000 0x00057000>;
|
|
qcom,sde-dspp-ad-off = <0x24000 0x22800>;
|
|
qcom,sde-dspp-ad-version = <0x00030000>;
|
|
qcom,sde-dspp-rc-version = <0x00010000>;
|
|
qcom,sde-dspp-rc-off = <0x15800 0x14c00>;
|
|
qcom,sde-dspp-rc-size = <0x100>;
|
|
qcom,sde-dspp-rc-min-region-width = <20>;
|
|
qcom,sde-dspp-spr-off = <0x15400 0x14400>;
|
|
qcom,sde-dspp-spr-size = <0x200>;
|
|
qcom,sde-dspp-spr-version = <0x00010000>;
|
|
qcom,sde-dspp-demura-off = <0x15600 0x14800>;
|
|
qcom,sde-dspp-demura-size = <0x200>;
|
|
qcom,sde-dspp-demura-version = <0x00010000>;
|
|
qcom,sde-lm-noise-off = <0x320>;
|
|
qcom,sde-lm-noise-version = <0x00010000>;
|
|
|
|
qcom,sde-dspp-aiqe-off = <0x39000 0xffffffff 0x3a000 0xffffffff>;
|
|
qcom,sde-dspp-aiqe-version = <0x00010000>;
|
|
qcom,sde-dspp-aiqe-size = <0x3fc>;
|
|
|
|
qcom,sde-dspp-aiqe-dither-off = <0x39700 0xffffffff 0x3a700 0xffffffff>;
|
|
qcom,sde-dspp-aiqe-dither-version = <0x00010000>;
|
|
qcom,sde-dspp-aiqe-dither-size = <0x20>;
|
|
|
|
qcom,sde-dspp-aiqe-wrapper-off = <0x39780 0xffffffff 0x3a780 0xffffffff>;
|
|
qcom,sde-dspp-aiqe-wrapper-version = <0x00010000>;
|
|
qcom,sde-dspp-aiqe-wrapper-size = <0x1c>;
|
|
|
|
qcom,sde-aiqe-has-feature-mdnie;
|
|
qcom,sde-aiqe-has-feature-abc;
|
|
qcom,sde-aiqe-has-feature-ssrc;
|
|
qcom,sde-aiqe-has-feature-copr;
|
|
|
|
qcom,sde-dspp-rc-mem-size = <2720>;
|
|
qcom,sde-dest-scaler-top-off = <0x00061000>;
|
|
qcom,sde-dest-scaler-off = <0x800 0x1000>;
|
|
qcom,sde-wb-off = <0x00066000>;
|
|
qcom,sde-wb-xin-id = <6>;
|
|
qcom,sde-intf-off = <0x0006b000 0x0006b800
|
|
0x0006c000 0x0006c800>;
|
|
qcom,sde-intf-type = "none", "dsi", "dsi", "hdmi";
|
|
qcom,sde-intf-tear-irq-off = <0 0x6e800 0x6e900 0>;
|
|
qcom,sde-pp-off = <0x00071000 0x00071800
|
|
0x00072000 0x00072800>;
|
|
qcom,sde-pp-slave = <0x0 0x0 0x0 0x0>;
|
|
qcom,sde-pp-cwb = <0x0 0x0 0x0 0x0 0x0 0x0 0x1 0x1>;
|
|
qcom,sde-cwb-dither = <0x0 0x0 0x0 0x0 0x0 0x0 0x1 0x1>;
|
|
qcom,sde-cdm-off = <0x0007a200>;
|
|
qcom,sde-dsc-off = <0x00081000 0x00081400>;
|
|
qcom,sde-vdc-off = <0x7C000>;
|
|
qcom,sde-vdc-size = <0xf10>;
|
|
qcom,sde-vdc-hw-rev = "vdc_1_2";
|
|
qcom,sde-vdc-enc = <0x200>;
|
|
qcom,sde-vdc-ctl = <0xf00>;
|
|
qcom,sde-intf-max-prefetch-lines = <0x15 0x15 0x15 0x15>;
|
|
|
|
qcom,sde-mixer-pair-mask = <2 1 6 0 0 3>;
|
|
qcom,sde-mixer-blend-op-off = <0x20 0x38 0x50 0x68 0x80 0x98
|
|
0xb0 0xc8 0xe0 0xf8 0x110>;
|
|
|
|
qcom,sde-qdss-off = <0x81a00>;
|
|
|
|
qcom,sde-sspp-type = "vig", "vig", "vig",
|
|
"vig", "rgb", "rgb",
|
|
"rgb", "rgb", "dma",
|
|
"dma", "cursor", "cursor";
|
|
|
|
qcom,sde-sspp-off = <0x00005000 0x00007000 0x00009000
|
|
0x0000b000 0x00015000 0x00017000
|
|
0x00019000 0x0001b000 0x00025000
|
|
0x00027000 0x00035000 0x00037000>;
|
|
|
|
qcom,sde-sspp-xin-id = <0 4 8
|
|
12 1 5
|
|
9 13 2
|
|
10 7 7>;
|
|
|
|
/* offsets are relative to "mdp_phys + qcom,sde-off */
|
|
qcom,sde-sspp-clk-ctrl = <0x2ac 0>, <0x2b4 0>, <0x2bc 0>,
|
|
<0x2c4 0>, <0x2ac 4>, <0x2b4 4>, <0x2bc 4>,
|
|
<0x2c4 4>, <0x2ac 8>, <0x2b4 8>, <0x3a8 16>,
|
|
<0x3b0 16>;
|
|
qcom,sde-sspp-clk-status = <0x2ac 0>, <0x2b4 0>, <0x2bc 0>,
|
|
<0x2c4 0>, <0x2ac 4>, <0x2b4 4>, <0x2bc 4>,
|
|
<0x2c4 4>, <0x2ac 8>, <0x2b4 8>, <0x3a8 16>,
|
|
<0x3b0 16>;
|
|
qcom,sde-scaling-linewidth = <2560>;
|
|
qcom,sde-mixer-linewidth = <2560>;
|
|
qcom,sde-sspp-linewidth = <2560>;
|
|
qcom,sde-mixer-blendstages = <0x7>;
|
|
qcom,sde-dsc-linewidth = <2048>;
|
|
qcom,sde-highest-bank-bit = <0x7 0x2>;
|
|
qcom,sde-ubwc-version = <0x10000000>;
|
|
qcom,sde-ubwc-static = <0x100>;
|
|
qcom,sde-ubwc-swizzle = <0>;
|
|
qcom,sde-ubwc-bw-calc-version = <0x1>;
|
|
qcom,sde-smart-panel-align-mode = <0xd>;
|
|
qcom,sde-panic-per-pipe;
|
|
qcom,sde-has-src-split;
|
|
qcom,sde-pipe-order-version = <0x1>;
|
|
qcom,sde-has-dim-layer;
|
|
qcom,sde-sspp-src-size = <0x100>;
|
|
qcom,sde-mixer-size = <0x100>;
|
|
qcom,sde-ctl-size = <0x100>;
|
|
qcom,sde-dspp-top-size = <0xc>;
|
|
qcom,sde-dspp-size = <0x100>;
|
|
qcom,sde-intf-size = <0x100>;
|
|
qcom,sde-dsc-size = <0x100>;
|
|
qcom,sde-cdm-size = <0x100>;
|
|
qcom,sde-pp-size = <0x100>;
|
|
qcom,sde-wb-size = <0x100>;
|
|
qcom,sde-dest-scaler-top-size = <0xc>;
|
|
qcom,sde-dest-scaler-size = <0x800>;
|
|
qcom,sde-len = <0x100>;
|
|
qcom,sde-wb-linewidth = <2560>;
|
|
qcom,sde-wb-linewidth-linear = <5120>;
|
|
qcom,sde-sspp-scale-size = <0x100>;
|
|
qcom,sde-mixer-blendstages = <0x8>;
|
|
qcom,sde-qseed-sw-lib-rev = "qseedv2";
|
|
qcom,sde-qseed-scalar-version = <0x3000>;
|
|
qcom,sde-csc-type = "csc-10bit";
|
|
qcom,sde-highest-bank-bit = <15>;
|
|
qcom,sde-has-mixer-gc;
|
|
qcom,sde-has-idle-pc;
|
|
qcom,sde-wakeup-with-touch;
|
|
qcom,fullsize-va-map;
|
|
qcom,sde-has-dest-scaler;
|
|
qcom,sde-max-trusted-vm-displays = <1>;
|
|
qcom,sde-max-dest-scaler-input-linewidth = <2048>;
|
|
qcom,sde-max-dest-scaler-output-linewidth = <2560>;
|
|
qcom,sde-sspp-max-rects = <1 1 1 1
|
|
1 1 1 1
|
|
1 1
|
|
1 1>;
|
|
qcom,sde-sspp-excl-rect = <1 1 1 1
|
|
1 1 1 1
|
|
1 1
|
|
1 1>;
|
|
qcom,sde-sspp-smart-dma-priority = <0 0 0 0
|
|
0 0 0 0
|
|
0 0
|
|
1 2>;
|
|
qcom,sde-smart-dma-rev = "smart_dma_v2";
|
|
qcom,sde-te-off = <0x100>;
|
|
qcom,sde-te2-off = <0x100>;
|
|
qcom,sde-te-size = <0xffff>;
|
|
qcom,sde-te2-size = <0xffff>;
|
|
qcom,sde-trusted-vm-env;
|
|
|
|
qcom,sde-wb-id = <2>;
|
|
qcom,sde-wb-clk-ctrl = <0x2bc 16>;
|
|
qcom,sde-wb-clk-status = <0x3bc 20>;
|
|
|
|
qcom,sde-qos-refresh-rates = <60 120>;
|
|
qcom,sde-danger-lut = <0x3ffff 0x3ffff 0x0 0x0 0x0 0x3fffff 0x3fffff>,
|
|
<0x3ffffff 0x3ffffff 0x0 0x0 0x0 0x3ffffff 0x3fffff,
|
|
0xffff0000 0xffff0000>;
|
|
qcom,sde-safe-lut = <0xFE00 0xFE00 0xFFFF 0x01 0x03FF 0xF800 0xF800>,
|
|
<0xE000 0xE000 0xFFFF 0x01 0x03FF 0xE000 0xF800, 0xff,
|
|
0xff>;
|
|
qcom,sde-creq-lut = <0x00112234 0x45566777 0x00112236 0x67777777
|
|
0x00112234 0x45566777 0x00112236 0x67777777
|
|
0x0 0x0 0x0 0x0
|
|
0x77776666 0x66666540 0x77776666 0x66666540
|
|
0x77776541 0x00000000 0x77776541 0x00000000
|
|
0x00123445 0x56677777 0x00123667 0x77777777
|
|
0x00123445 0x56677777 0x00123667 0x77777777
|
|
0x55555544 0x33221100 0x55555544 0x33221100>,
|
|
<0x02344455 0x56667777 0x02366677 0x77777777
|
|
0x02344455 0x56667777 0x02366677 0x77777777
|
|
0x0 0x0 0x0 0x0
|
|
0x77776666 0x66666540 0x77776666 0x66666540
|
|
0x77776541 0x00000000 0x77776541 0x00000000
|
|
0x02344455 0x56667777 0x02366677 0x77777777
|
|
0x00123445 0x56677777 0x00123667 0x77777777
|
|
0x55555544 0x33221100 0x55555544 0x33221100>;
|
|
|
|
qcom,sde-cdp-setting = <1 1>, <1 0>;
|
|
|
|
qcom,sde-qos-cpu-mask = <0x3>;
|
|
qcom,sde-qos-cpu-mask-performance = <0xf>;
|
|
qcom,sde-qos-cpu-dma-latency = <300>;
|
|
qcom,sde-qos-cpu-irq-latency = <300>;
|
|
|
|
qcom,sde-ipcc-protocol-id = <0x2>;
|
|
qcom,sde-ipcc-client-dpu-phys-id = <0x19>;
|
|
|
|
qcom,sde-vbif-off = <0 0>;
|
|
qcom,sde-vbif-id = <0 1>;
|
|
qcom,sde-vbif-default-ot-rd-limit = <32>;
|
|
qcom,sde-vbif-default-ot-wr-limit = <16>;
|
|
qcom,sde-vbif-dynamic-ot-rd-limit = <62208000 2>,
|
|
<124416000 4>, <248832000 16>;
|
|
qcom,sde-vbif-dynamic-ot-wr-limit = <62208000 2>,
|
|
<124416000 4>, <248832000 16>;
|
|
qcom,sde-vbif-memtype-0 = <3 3 3 3 3 3 3 3>;
|
|
qcom,sde-vbif-memtype-1 = <3 3 3 3 3 3>;
|
|
|
|
qcom,sde-uidle-off = <0x80000>;
|
|
qcom,sde-uidle-size = <0x70>;
|
|
|
|
qcom,sde-dram-channels = <2>;
|
|
qcom,sde-num-nrt-paths = <1>;
|
|
|
|
qcom,sde-max-bw-high-kbps = <9000000>;
|
|
qcom,sde-max-bw-low-kbps = <9000000>;
|
|
|
|
qcom,sde-core-ib-ff = "1.1";
|
|
qcom,sde-core-clk-ff = "1.0";
|
|
qcom,sde-min-core-ib-kbps = <2400000>;
|
|
qcom,sde-min-llcc-ib-kbps = <800000>;
|
|
qcom,sde-min-dram-ib-kbps = <800000>;
|
|
qcom,sde-comp-ratio-rt = "NV12/5/1/1.1 AB24/5/1/1.2 XB24/5/1/1.3";
|
|
qcom,sde-comp-ratio-nrt = "NV12/5/1/1.1 AB24/5/1/1.2 XB24/5/1/1.3";
|
|
qcom,sde-undersized-prefill-lines = <4>;
|
|
qcom,sde-xtra-prefill-lines = <5>;
|
|
qcom,sde-dest-scale-prefill-lines = <6>;
|
|
qcom,sde-macrotile-prefill-lines = <7>;
|
|
qcom,sde-yuv-nv12-prefill-lines = <8>;
|
|
qcom,sde-linear-prefill-lines = <9>;
|
|
qcom,sde-downscaling-prefill-lines = <10>;
|
|
qcom,sde-max-per-pipe-bw-kbps = <2400000 2400000 2400000 2400000
|
|
2400000 2400000 2400000 2400000>;
|
|
qcom,sde-amortizable-threshold = <11>;
|
|
qcom,sde-secure-sid-mask = <0x200801 0x200c01>;
|
|
|
|
qcom,sde-dnsc-blur-version = <0x100>;
|
|
qcom,sde-dnsc-blur-off = <0x7D000>;
|
|
qcom,sde-dnsc-blur-size = <0x40>;
|
|
qcom,sde-dnsc-blur-gaus-lut-off = <0x100>;
|
|
qcom,sde-dnsc-blur-gaus-lut-size = <0x400>;
|
|
qcom,sde-dnsc-blur-dither-off = <0x5E0>;
|
|
qcom,sde-dnsc-blur-dither-size = <0x20>;
|
|
|
|
qcom,vram-size = <0x200000>;
|
|
qcom,pmic-arb-address = <0x3F800 0x3F900 0x3FA00>;
|
|
|
|
qcom,sde-ib-bw-vote = <2500000 0 800000>;
|
|
|
|
qcom,sde-vbif-qos-rt-remap = <3 3 4 4 5 5 6 6 3 3 4 4 5 5 6 6>;
|
|
qcom,sde-vbif-qos-nrt-remap = <3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3>;
|
|
qcom,sde-vbif-qos-cwb-remap = <3 3 4 4 5 5 6 3 3 3 4 4 5 5 6 3>;
|
|
qcom,sde-vbif-qos-lutdma-remap = <3 3 3 3 4 4 4 4 3 3 3 3 4 4 4 4>;
|
|
qcom,sde-vbif-qos-offline-wb-remap = <3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3>;
|
|
qcom,sde-vbif-qos-cnoc-remap = <3 3 4 4 5 5 5 5 3 3 3 3 3 3 3 3>;
|
|
qcom,sde-vbif-qos-wb-rot-remap = <4 4 5 5 5 5 5 6 4 4 5 5 5 5 5 6>;
|
|
|
|
qcom,sde-reg-dma-off = <0 0x400>;
|
|
qcom,sde-reg-dma-id = <0 1>;
|
|
qcom,sde-reg-dma-version = <0x00020000>;
|
|
qcom,sde-reg-dma-trigger-off = <0x119c>;
|
|
qcom,sde-reg-dma-broadcast-disabled = <0>;
|
|
qcom,sde-reg-dma-xin-id = <7>;
|
|
qcom,sde-reg-dma-clk-ctrl = <0x2bc 20>;
|
|
|
|
qcom,sde-sspp-vig-blocks {
|
|
vcm@0 {
|
|
cell-index = <0>;
|
|
qcom,sde-vig-top-off = <0xa00>;
|
|
qcom,sde-vig-csc-off = <0x1a00>;
|
|
qcom,sde-vig-qseed-off = <0xa00>;
|
|
qcom,sde-vig-qseed-size = <0xe0>;
|
|
qcom,sde-vig-gamut = <0x1d00 0x00060001>;
|
|
qcom,sde-vig-igc = <0x1d00 0x00060000>;
|
|
/* Offset from vig top, version of HSIC */
|
|
qcom,sde-vig-hsic = <0x200 0x00010000>;
|
|
qcom,sde-vig-memcolor = <0x200 0x00010000>;
|
|
qcom,sde-vig-pcc = <0x1780 0x00010000>;
|
|
qcom,sde-vig-inverse-pma;
|
|
qcom,sde-fp16-igc = <0x200 0x00010000>;
|
|
qcom,sde-fp16-unmult = <0x200 0x00010000>;
|
|
qcom,sde-fp16-gc = <0x200 0x00010000>;
|
|
qcom,sde-fp16-csc = <0x200 0x00010000>;
|
|
qcom,sde-ucsc-igc = <0x700 0x00010000>;
|
|
qcom,sde-ucsc-unmult = <0x700 0x00010000>;
|
|
qcom,sde-ucsc-gc = <0x700 0x00010000>;
|
|
qcom,sde-ucsc-csc = <0x700 0x00010000>;
|
|
qcom,sde-ucsc-alpha-dither = <0x700 0x00010000>;
|
|
};
|
|
|
|
vcm@1 {
|
|
cell-index = <1>;
|
|
qcom,sde-fp16-igc = <0x280 0x00010000>;
|
|
qcom,sde-fp16-unmult = <0x280 0x00010000>;
|
|
qcom,sde-fp16-gc = <0x280 0x00010000>;
|
|
qcom,sde-fp16-csc = <0x280 0x00010000>;
|
|
qcom,sde-ucsc-igc = <0x1700 0x00010000>;
|
|
qcom,sde-ucsc-unmult = <0x1700 0x00010000>;
|
|
qcom,sde-ucsc-gc = <0x1700 0x00010000>;
|
|
qcom,sde-ucsc-csc = <0x1700 0x00010000>;
|
|
qcom,sde-ucsc-alpha-dither = <0x1700 0x00010000>;
|
|
};
|
|
};
|
|
|
|
qcom,sde-sspp-dma-blocks {
|
|
dgm@0 {
|
|
cell-index = <0>;
|
|
qcom,sde-dma-top-off = <0x800>;
|
|
qcom,sde-dma-igc = <0x400 0x00050000>;
|
|
qcom,sde-dma-gc = <0x600 0x00050000>;
|
|
qcom,sde-dma-inverse-pma;
|
|
qcom,sde-dma-csc-off = <0x200>;
|
|
qcom,sde-fp16-igc = <0x200 0x00010000>;
|
|
qcom,sde-fp16-unmult = <0x200 0x00010000>;
|
|
qcom,sde-fp16-gc = <0x200 0x00010000>;
|
|
qcom,sde-fp16-csc = <0x200 0x00010000>;
|
|
qcom,sde-ucsc-igc = <0x700 0x00010000>;
|
|
qcom,sde-ucsc-unmult = <0x700 0x00010000>;
|
|
qcom,sde-ucsc-gc = <0x700 0x00010000>;
|
|
qcom,sde-ucsc-csc = <0x700 0x00010000>;
|
|
qcom,sde-ucsc-alpha-dither = <0x700 0x00010000>;
|
|
};
|
|
|
|
dgm@1 {
|
|
cell-index = <1>;
|
|
qcom,sde-dma-igc = <0x1400 0x00050000>;
|
|
qcom,sde-dma-gc = <0x600 0x00050000>;
|
|
qcom,sde-dma-inverse-pma;
|
|
qcom,sde-dma-csc-off = <0x1200>;
|
|
qcom,sde-fp16-igc = <0x200 0x00010000>;
|
|
qcom,sde-fp16-unmult = <0x200 0x00010000>;
|
|
qcom,sde-fp16-gc = <0x200 0x00010000>;
|
|
qcom,sde-fp16-csc = <0x200 0x00010000>;
|
|
qcom,sde-ucsc-igc = <0x1700 0x00010000>;
|
|
qcom,sde-ucsc-unmult = <0x1700 0x00010000>;
|
|
qcom,sde-ucsc-gc = <0x1700 0x00010000>;
|
|
qcom,sde-ucsc-csc = <0x1700 0x00010000>;
|
|
qcom,sde-ucsc-alpha-dither = <0x1700 0x00010000>;
|
|
};
|
|
};
|
|
|
|
qcom,sde-sspp-rgb-blocks {
|
|
qcom,sde-rgb-scaler-off = <0x200>;
|
|
qcom,sde-rgb-scaler-size = <0x74>;
|
|
qcom,sde-rgb-pcc = <0x380 0x00010000>;
|
|
};
|
|
|
|
qcom,sde-dspp-blocks {
|
|
qcom,sde-dspp-igc = <0x0 0x00010000>;
|
|
qcom,sde-dspp-pcc = <0x1700 0x00010000>;
|
|
qcom,sde-dspp-gc = <0x17c0 0x00010000>;
|
|
qcom,sde-dspp-hsic = <0x0 0x00010000>;
|
|
qcom,sde-dspp-memcolor = <0x0 0x00010000>;
|
|
qcom,sde-dspp-sixzone = <0x0 0x00010000>;
|
|
qcom,sde-dspp-gamut = <0x1600 0x00010000>;
|
|
qcom,sde-dspp-dither = <0x0 0x00010000>;
|
|
qcom,sde-dspp-hist = <0x0 0x00010000>;
|
|
qcom,sde-dspp-vlut = <0x0 0x00010000>;
|
|
};
|
|
|
|
qcom,sde-mixer-blocks {
|
|
qcom,sde-mixer-gc = <0x3c0 0x00010000>;
|
|
};
|
|
|
|
qcom,msm-hdmi-audio-rx {
|
|
compatible = "qcom,msm-hdmi-audio-codec-rx";
|
|
};
|
|
|
|
qcom,sde-inline-rotator = <&mdss_rotator 0>;
|
|
qcom,sde-inline-rot-xin = <10 11>;
|
|
qcom,sde-inline-rot-xin-type = "sspp", "wb";
|
|
qcom,sde-inline-rot-clk-ctrl = <0x2bc 0x8>, <0x2bc 0xc>;
|
|
|
|
qcom,platform-supply-entries {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
qcom,platform-supply-entry@0 {
|
|
reg = <0>;
|
|
qcom,supply-name = "vdd";
|
|
qcom,supply-min-voltage = <0>;
|
|
qcom,supply-max-voltage = <0>;
|
|
qcom,supply-enable-load = <0>;
|
|
qcom,supply-disable-load = <0>;
|
|
qcom,supply-pre-on-sleep = <0>;
|
|
qcom,supply-post-on-sleep = <0>;
|
|
qcom,supply-pre-off-sleep = <0>;
|
|
qcom,supply-post-off-sleep = <0>;
|
|
};
|
|
};
|
|
|
|
interconnects = <&mmss_noc MASTER_MDP0 &mmss_noc SLAVE_MNOC_HF_MEM_NOC>
|
|
<&mmss_noc MASTER_MDP1 &mmss_noc SLAVE_MNOC_HF_MEM_NOC>,
|
|
<&gem_noc MASTER_MNOC_HF_MEM_NOC &gem_noc SLAVE_LLCC>,
|
|
<&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>,
|
|
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
|
|
interconnect-names = "qcom,sde-data-bus0", "qcom,sde-data-bus1",
|
|
"qcom,sde-llcc-bus", "qcom,sde-ebi-bus", "qcom,sde-reg-bus";
|
|
qcom,sde-reg-bus,vectors-KBps = <0 0>,
|
|
<0 76800>,
|
|
<0 150000>,
|
|
<0 300000>;
|
|
|
|
smmu_kms_unsec: qcom,smmu_kms_unsec_cb {
|
|
compatible = "qcom,smmu_sde_unsec";
|
|
iommus = <&mmss_smmu 0>;
|
|
};
|
|
|
|
smmu_kms_sec: qcom,smmu_kms_sec_cb {
|
|
compatible = "qcom,smmu_sde_sec";
|
|
iommus = <&mmss_smmu 1>;
|
|
};
|
|
};
|
|
...
|