1a3f9c0ed5
Add ufs proxy power supply to add an additional vote for VCCQ LDO. In case of ufs shutdown, UFS VCCQ LDO would be turned off by PMIC regulator itself. Change-Id: If55c56bcbe6a3b76dbe5703095bd5d98abdca8a6 Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
332 lines
7.5 KiB
Plaintext
332 lines
7.5 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/clock/qcom,gcc-sun.h>
|
|
|
|
#include "sun-pmic-overlay.dtsi"
|
|
#include "sun-thermal-overlay.dtsi"
|
|
|
|
&soc {
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
label = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&key_vol_up_default>;
|
|
|
|
vol_up {
|
|
label = "volume_up";
|
|
gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
linux,can-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
®ulator_ocp_notifier {
|
|
periph-1c1-supply = <&L1B>;
|
|
periph-1c2-supply = <&L2B>;
|
|
periph-1c4-supply = <&L4B>;
|
|
periph-1c5-supply = <&L5B>;
|
|
periph-1c6-supply = <&L6B>;
|
|
periph-1c7-supply = <&L7B>;
|
|
periph-1c8-supply = <&L8B>;
|
|
periph-1c9-supply = <&L9B>;
|
|
periph-1ca-supply = <&L10B>;
|
|
periph-1cb-supply = <&L11B>;
|
|
periph-1cc-supply = <&L12B>;
|
|
periph-1cd-supply = <&L13B>;
|
|
periph-1ce-supply = <&L14B>;
|
|
periph-1cf-supply = <&L15B>;
|
|
periph-1d0-supply = <&L16B>;
|
|
periph-1d1-supply = <&L17B>;
|
|
periph-1e4-supply = <&BOB1>;
|
|
periph-1e6-supply = <&BOB2>;
|
|
periph-39b-supply = <&S1D>;
|
|
periph-39e-supply = <&S2D_LEVEL>;
|
|
periph-3a1-supply = <&S3D>;
|
|
periph-3a4-supply = <&S4D>;
|
|
periph-3a7-supply = <&S5D_LEVEL>;
|
|
periph-3c1-supply = <&L1D>;
|
|
periph-3c2-supply = <&L2D>;
|
|
periph-3c3-supply = <&L3D>;
|
|
periph-5aa-supply = <&S6F_LEVEL>;
|
|
periph-5c1-supply = <&L1F>;
|
|
periph-5c2-supply = <&L2F>;
|
|
periph-5c3-supply = <&L3F>;
|
|
periph-69b-supply = <&S1G>;
|
|
periph-69e-supply = <&S2G_LEVEL>;
|
|
periph-6a1-supply = <&S3G>;
|
|
periph-6a4-supply = <&S4G>;
|
|
periph-6a7-supply = <&S5G_LEVEL>;
|
|
periph-6ad-supply = <&S7G_LEVEL>;
|
|
periph-6c1-supply = <&L1G>;
|
|
periph-6c2-supply = <&L2G>;
|
|
periph-6c3-supply = <&L3G>;
|
|
periph-89b-supply = <&S1I_LEVEL>;
|
|
periph-8a1-supply = <&S3I_LEVEL>;
|
|
periph-8a7-supply = <&S5I_LEVEL>;
|
|
periph-8aa-supply = <&S6I_LEVEL>;
|
|
periph-8ad-supply = <&S7I>;
|
|
periph-8b0-supply = <&S8I>;
|
|
periph-8c1-supply = <&L1I>;
|
|
periph-8c2-supply = <&L2I>;
|
|
periph-8c3-supply = <&L3I>;
|
|
periph-99b-supply = <&S1J_LEVEL>;
|
|
periph-99e-supply = <&S2J>;
|
|
periph-9a1-supply = <&S3J>;
|
|
periph-9a4-supply = <&S4J>;
|
|
periph-9c1-supply = <&L1J>;
|
|
periph-9c2-supply = <&L2J>;
|
|
periph-9c3-supply = <&L3J_LEVEL>;
|
|
periph-ac1-supply = <&L1K>;
|
|
periph-ac2-supply = <&L2K>;
|
|
periph-ac3-supply = <&L3K>;
|
|
periph-ac4-supply = <&L4K>;
|
|
periph-ac5-supply = <&L5K>;
|
|
periph-ac6-supply = <&L6K>;
|
|
periph-ac7-supply = <&L7K>;
|
|
periph-c40-supply = <&L1M>;
|
|
periph-c41-supply = <&L2M>;
|
|
periph-c42-supply = <&L3M>;
|
|
periph-c43-supply = <&L4M>;
|
|
periph-c44-supply = <&L5M>;
|
|
periph-c45-supply = <&L6M>;
|
|
periph-c46-supply = <&L7M>;
|
|
periph-d40-supply = <&L1N>;
|
|
periph-d41-supply = <&L2N>;
|
|
periph-d42-supply = <&L3N>;
|
|
periph-d43-supply = <&L4N>;
|
|
periph-d44-supply = <&L5N>;
|
|
periph-d45-supply = <&L6N>;
|
|
periph-d46-supply = <&L7N>;
|
|
};
|
|
|
|
&pm8550_switch0 {
|
|
qcom,led-mask = <9>; /* Channels 1 & 4 */
|
|
qcom,symmetry-en;
|
|
};
|
|
|
|
&pm8550_switch1 {
|
|
qcom,led-mask = <6>; /* Channels 2 & 3 */
|
|
qcom,symmetry-en;
|
|
};
|
|
|
|
&pm8550_switch2 {
|
|
qcom,led-mask = <15>; /* All Channels */
|
|
qcom,symmetry-en;
|
|
};
|
|
|
|
&pm8550_flash {
|
|
status = "ok";
|
|
};
|
|
|
|
&pmih010x_haptics {
|
|
qcom,vmax-mv = <1700>;
|
|
qcom,lra-period-us = <7692>;
|
|
};
|
|
|
|
&ufsphy_mem {
|
|
compatible = "qcom,ufs-phy-qmp-v4-sun";
|
|
|
|
/* VDDA_UFS_CORE */
|
|
vdda-phy-supply = <&pm_v6j_l1>;
|
|
vdda-phy-max-microamp = <213000>;
|
|
/*
|
|
* Platforms supporting Gear 5 && Rate B require a different
|
|
* voltage supply. Check the Power Grid document.
|
|
*/
|
|
vdda-phy-min-microvolt = <912000>;
|
|
|
|
/* VDDA_UFS_0_1P2 */
|
|
vdda-pll-supply = <&pm_v8g_l3>;
|
|
vdda-pll-max-microamp = <18300>;
|
|
|
|
/* Phy GDSC for VDD_MX, always on */
|
|
vdd-phy-gdsc-supply = <&gcc_ufs_mem_phy_gdsc>;
|
|
|
|
/* Qref power supply, Refer Qref diagram */
|
|
vdda-qref-supply = <&pm_v8i_l3>;
|
|
vdda-qref-max-microamp = <64500>;
|
|
|
|
/*
|
|
* Refer to Sun's Power Grid Analysis document.
|
|
* Add vote for REFGEN_VDD_A_0P9/VDD_A_PCIE_0_0P9 regulator.
|
|
*/
|
|
vdda-refgen-supply = <&pm_v6f_l1>;
|
|
vdda-refgen-max-microamp = <206000>;
|
|
|
|
status = "ok";
|
|
};
|
|
|
|
&ufshc_mem {
|
|
vdd-hba-supply = <&gcc_ufs_phy_gdsc>;
|
|
|
|
vcc-supply = <&pm_humu_l17>;
|
|
vcc-max-microamp = <1300000>;
|
|
|
|
vccq-supply = <&pm_v8d_l1>;
|
|
vccq-max-microamp = <1200000>;
|
|
|
|
/* UFS Rst pin is always on. It is shared with VDD_PX14 */
|
|
qcom,vddp-ref-clk-supply = <&pm_v8i_l2>;
|
|
qcom,vddp-ref-clk-max-microamp = <100>;
|
|
|
|
qcom,vccq-parent-supply = <&pm_v8i_s7>;
|
|
qcom,vccq-parent-max-microamp = <210000>;
|
|
|
|
qcom,vccq-proxy-vote-supply = <&pm_v8d_l1>;
|
|
qcom,vccq-proxy-vote-max-microamp = <1200000>;
|
|
|
|
reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>;
|
|
resets = <&gcc GCC_UFS_PHY_BCR>;
|
|
reset-names = "rst";
|
|
|
|
status = "ok";
|
|
};
|
|
|
|
&wcd_usbss {
|
|
interrupt-parent = <&spmi_bus>;
|
|
interrupts = <0x0 0xb6 0x1 IRQ_TYPE_EDGE_BOTH>;
|
|
interrupt-names = "usb_wcd";
|
|
nvmem-cells = <&usb_mode>;
|
|
nvmem-cell-names = "usb_mode";
|
|
};
|
|
|
|
&sdhc_2 {
|
|
status = "ok";
|
|
vdd-supply = <&pm_humu_l9>;
|
|
qcom,vdd-voltage-level = <2950000 2960000>;
|
|
qcom,vdd-current-level = <0 800000>;
|
|
|
|
vdd-io-supply = <&pm_humu_l8>;
|
|
qcom,vdd-io-voltage-level = <1800000 2960000>;
|
|
qcom,vdd-io-current-level = <0 22000>;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc2_on>;
|
|
pinctrl-1 = <&sdc2_off>;
|
|
|
|
cd-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
|
|
|
|
resets = <&gcc GCC_SDCC2_BCR>;
|
|
reset-names = "core_reset";
|
|
|
|
qcom,uses_level_shifter;
|
|
};
|
|
|
|
&eusb2_phy0 {
|
|
dummy-supply = <&pmih010x_eusb2_repeater>;
|
|
usb-repeater = <&pmih010x_eusb2_repeater>;
|
|
};
|
|
|
|
&qupv3_se5_i2c {
|
|
status = "ok";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
redriver: redriver@1c {
|
|
compatible = "onnn,redriver";
|
|
reg = <0x1c>;
|
|
|
|
vdd-supply = <&L15B>;
|
|
|
|
lane-channel-swap;
|
|
|
|
eq = /bits/ 8 <
|
|
/* Parameters for USB */
|
|
0x4 0x4 0x4 0x4
|
|
/* Parameters for DP */
|
|
0x5 0x7 0x7 0x5>;
|
|
flat-gain = /bits/ 8 <
|
|
/* Parameters for USB */
|
|
0x3 0x1 0x1 0x3
|
|
/* Parameters for DP */
|
|
0x0 0x3 0x3 0x0>;
|
|
output-comp = /bits/ 8 <
|
|
/* Parameters for USB */
|
|
0x3 0x3 0x3 0x3
|
|
/* Parameters for DP */
|
|
0x3 0x3 0x3 0x3>;
|
|
loss-match = /bits/ 8 <
|
|
/* Parameters for USB */
|
|
0x1 0x3 0x3 0x1
|
|
/* Parameters for DP */
|
|
0x3 0x3 0x3 0x3>;
|
|
};
|
|
};
|
|
|
|
&usb_qmp_dp_phy {
|
|
pinctrl-names = "unused";
|
|
};
|
|
|
|
&usb0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb3phy_portselect_gpio>;
|
|
gpios = <&tlmm 61 0>;
|
|
|
|
ssusb_redriver = <&redriver>;
|
|
|
|
usb-role-switch;
|
|
port {
|
|
usb_port0: endpoint {
|
|
remote-endpoint = <&usb_port0_connector>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&ucsi {
|
|
connector {
|
|
port {
|
|
usb_port0_connector: endpoint {
|
|
remote-endpoint = <&usb_port0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&qupv3_se4_spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "ok";
|
|
qcom,touch-active = "st,fts";
|
|
qcom,la-vm;
|
|
|
|
st_fts@0 {
|
|
compatible = "st,fts";
|
|
reg = <0x0>;
|
|
spi-max-frequency = <1000000>;
|
|
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <162 0x2008>;
|
|
vdd-supply = <&L4B>;
|
|
avdd-supply = <&L14B>;
|
|
pinctrl-names = "pmx_ts_active", "pmx_ts_suspend";
|
|
pinctrl-0 = <&ts_active>;
|
|
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
|
|
st,irq-gpio = <&tlmm 162 0x2008>;
|
|
st,reset-gpio = <&tlmm 161 0x00>;
|
|
st,regulator_dvdd = "vdd";
|
|
st,regulator_avdd = "avdd";
|
|
|
|
st,touch-type = "primary";
|
|
st,qts_en;
|
|
qts,trusted-touch-mode = "vm_mode";
|
|
qts,touch-environment = "pvm";
|
|
qts,trusted-touch-type = "primary";
|
|
qts,trusted-touch-spi-irq = <652>;
|
|
qts,trusted-touch-io-bases = <0xa90000>;
|
|
qts,trusted-touch-io-sizes = <0x1000>;
|
|
qts,trusted-touch-vm-gpio-list = <&tlmm 48 0 &tlmm 49 0 &tlmm 50 0
|
|
&tlmm 51 0 &tlmm 161 0 &tlmm 162 0x2008>;
|
|
|
|
};
|
|
};
|