Files
android_kernel_samsung_sm87…/qcom/tuna-pmiv0108.dtsi
Uttkarsh Aggarwal 6df5e4503b ARM: dts: msm: Add eUSB2 repeater nodes for tuna
Add the eUSB2 repeater node and references for PMIH010x and
PMIV010x.

Note: ATP, QRD and CDP.
Change-Id: Id47a3d7243a00be3bf5d186cc5eb8a9b2e6f677d
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
2024-11-22 11:49:40 +05:30

197 lines
4.0 KiB
Plaintext

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/iio/qcom,spmi-adc5-gen3-pmiv0104.h>
#include "pmiv010x.dtsi"
&pmiv010x_gpios {
charger_skin_therm {
charger_skin_therm_default: charger_skin_therm_default {
pins = "gpio6";
bias-high-impedence;
};
};
};
&pmiv010x_amoled {
status= "disabled";
};
&pmiv010x_amoled_ecm {
status = "disabled";
};
&pmiv010x_tz {
io-channels = <&pmk8550_vadc PMIV0104_ADC5_GEN3_DIE_TEMP>;
io-channel-names = "thermal";
};
&battery_charger {
#cooling-cells = <2>;
qcom,thermal-mitigation-step = <500000>;
};
&pmk8550_vadc {
pinctrl-names = "default";
pinctrl-0 = <&charger_skin_therm_default &sys_therm_6_gpio7_default>;
pmiv010x_ref_gnd {
reg = <PMIV0104_ADC5_GEN3_OFFSET_REF>;
label = "pmiv010x_ref_gnd";
qcom,pre-scaling = <1 1>;
};
pmiv010x_vref_1p25 {
reg = <PMIV0104_ADC5_GEN3_1P25VREF>;
label = "pmiv010x_vref_1p25";
qcom,pre-scaling = <1 1>;
};
pmiv010x_die_temp {
reg = <PMIV0104_ADC5_GEN3_DIE_TEMP>;
label = "pmiv010x_die_temp";
qcom,pre-scaling = <1 1>;
};
pmiv010x_vph_pwr {
reg = <PMIV0104_ADC5_GEN3_VPH_PWR>;
label = "pmiv010x_vph_pwr";
qcom,pre-scaling = <1 3>;
};
pmiv010x_vbat_sns_qbg {
reg = <PMIV0104_ADC5_GEN3_VBAT_SNS_QBG>;
label = "pmiv010x_vbat_sns";
qcom,pre-scaling = <1 3>;
};
pmiv010x_chg_temp {
reg = <PMIV0104_ADC5_GEN3_CHG_TEMP>;
label = "pmiv010x_chg_temp";
qcom,pre-scaling = <1 1>;
};
pmiv010x_bat_therm {
reg = <PMIV0104_ADC5_GEN3_AMUX_THM1_BATT_THERM_100K_PU>;
label = "pmiv010x_bat_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
qcom,scale-fn-type = <ADC_SCALE_HW_CALIB_PM5_GEN3_BATT_THERM_100K>;
};
pmiv010x_bat_id {
reg = <PMIV0104_ADC5_GEN3_AMUX_THM2_BATT_ID_100K_PU>;
label = "pmiv010x_bat_id";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
qcom,scale-fn-type = <ADC_SCALE_HW_CALIB_PM5_GEN3_BATT_ID_100K>;
};
pmiv010x_iin_fb {
reg = <PMIV0104_ADC5_GEN3_IIN_FB>;
label = "pmiv010x_iin_fb";
};
pmiv010x_ichg_fb {
reg = <PMIV0104_ADC5_GEN3_ICHG_FB>;
label = "pmiv010x_ichg_fb";
};
pmiv010x_sys_therm_7 {
reg = <PMIV0104_ADC5_GEN3_AMUX_THM6_GPIO6_100K_PU>;
label = "pmiv010x_charger_skin_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
qcom,adc-tm-type = <1>;
};
pmiv010x_sys_therm_8 {
reg = <PMIV0104_ADC5_GEN3_AMUX_THM4_USB_THERM_100K_PU>;
label = "pmiv010x_conn_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
qcom,adc-tm-type = <1>;
};
};
&pmic_glink_debug {
spmi@0 {
reg = <0>;
#address-cells = <2>;
#size-cells = <0>;
qcom,pmiv010x-debug@7 {
compatible = "qcom,spmi-pmic";
reg = <7 SPMI_USID>;
qcom,can-sleep;
};
};
};
&spmi0_debug_bus {
qcom,pmiv010x-debug@7 {
compatible = "qcom,spmi-pmic";
reg = <7 SPMI_USID>;
#address-cells = <2>;
#size-cells = <0>;
qcom,can-sleep;
};
};
&thermal_zones {
sys-therm-7 {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8550_vadc PMIV0104_ADC5_GEN3_AMUX_THM6_GPIO6_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
sys-therm-8 {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8550_vadc PMIV0104_ADC5_GEN3_AMUX_THM4_USB_THERM_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
&pmiv010x_eusb2_repeater {
vdd18-supply = <&L7B>;
vdd3-supply = <&L17B>;
};
&eusb2_phy0 {
dummy-supply = <&pmiv010x_eusb2_repeater>;
usb-repeater = <&pmiv010x_eusb2_repeater>;
};