android_kernel_samsung_sm8750-devicetrees/qcom/pm8550.dtsi

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
 */

#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/spmi/spmi.h>

&spmi_bus {
	#address-cells = <2>;
	#size-cells = <0>;
	interrupt-controller;
	#interrupt-cells = <4>;

	qcom,pm8550@1 {
		compatible = "qcom,spmi-pmic";
		reg = <0x1 SPMI_USID>;
		#address-cells = <1>;
		#size-cells = <0>;

		pm8550_tz: pm8550-temp-alarm@a00 {
			compatible = "qcom,spmi-temp-alarm";
			reg = <0xa00>;
			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
			#thermal-sensor-cells = <0>;
		};

		pm8550_gpios: pinctrl@8800 {
			compatible = "qcom,pm8550-gpio";
			reg = <0x8800>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		led-controller {
			compatible = "qcom,pm8350c-pwm";
			#address-cells = <1>;
			#size-cells = <0>;
			#pwm-cells = <2>;
			nvmem = <&pmk8550_sdam_21>,< &pmk8550_sdam_22>;
			nvmem-names = "lpg_chan_sdam", "lut_sdam";

			led@1 {
				reg = <1>;
				color = <LED_COLOR_ID_RED>;
				label = "red";
			};

			led@2 {
				reg = <2>;
				color = <LED_COLOR_ID_GREEN>;
				label = "green";
			};

			led@3 {
				reg = <3>;
				color = <LED_COLOR_ID_BLUE>;
				label = "blue";
			};
		};

		pm8550_bcl: bcl@4700 {
			compatible = "qcom,bcl-v5";
			reg = <0x4700 0x100>;
			interrupts = <0x1 0x47 0x0 IRQ_TYPE_NONE>,
				     <0x1 0x47 0x1 IRQ_TYPE_NONE>,
				     <0x1 0x47 0x2 IRQ_TYPE_NONE>;
			interrupt-names = "bcl-lvl0",
					  "bcl-lvl1",
					  "bcl-lvl2";
			qcom,pmic7-threshold;
			#thermal-sensor-cells = <1>;
		};

		pm8550_flash: qcom,flash_led@ee00 {
			compatible = "qcom,qti-pm8350c-flash-led";
			reg = <0xee00>;
			interrupts = <0x1 0xee 0x0 IRQ_TYPE_EDGE_RISING>,
				     <0x1 0xee 0x3 IRQ_TYPE_EDGE_RISING>,
				     <0x1 0xee 0x4 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "led-fault-irq",
					  "all-ramp-down-done-irq",
					  "all-ramp-up-done-irq";
			qcom,thermal-derate-current = <200 500>;
			status = "disabled";

			pm8550_flash0: qcom,flash_0 {
				label = "flash";
				qcom,led-name = "led:flash_0";
				qcom,max-current-ma = <1500>;
				qcom,default-led-trigger = "flash0_trigger";
				qcom,id = <0>;
				qcom,duration-ms = <1280>;
				qcom,ires-ua = <12500>;
			};

			pm8550_flash1: qcom,flash_1 {
				label = "flash";
				qcom,led-name = "led:flash_1";
				qcom,max-current-ma = <1500>;
				qcom,default-led-trigger = "flash1_trigger";
				qcom,id = <1>;
				qcom,duration-ms = <1280>;
				qcom,ires-ua = <12500>;
			};

			pm8550_flash2: qcom,flash_2 {
				label = "flash";
				qcom,led-name = "led:flash_2";
				qcom,max-current-ma = <1500>;
				qcom,default-led-trigger = "flash2_trigger";
				qcom,id = <2>;
				qcom,duration-ms = <1280>;
				qcom,ires-ua = <12500>;
			};

			pm8550_flash3: qcom,flash_3 {
				label = "flash";
				qcom,led-name = "led:flash_3";
				qcom,max-current-ma = <1500>;
				qcom,default-led-trigger = "flash3_trigger";
				qcom,id = <3>;
				qcom,duration-ms = <1280>;
				qcom,ires-ua = <12500>;
			};

			pm8550_torch0: qcom,torch_0 {
				label = "torch";
				qcom,led-name = "led:torch_0";
				qcom,max-current-ma = <500>;
				qcom,default-led-trigger = "torch0_trigger";
				qcom,id = <0>;
				qcom,ires-ua = <12500>;
			};

			pm8550_torch1: qcom,torch_1 {
				label = "torch";
				qcom,led-name = "led:torch_1";
				qcom,max-current-ma = <500>;
				qcom,default-led-trigger = "torch1_trigger";
				qcom,id = <1>;
				qcom,ires-ua = <12500>;
			};

			pm8550_torch2: qcom,torch_2 {
				label = "torch";
				qcom,led-name = "led:torch_2";
				qcom,max-current-ma = <500>;
				qcom,default-led-trigger = "torch2_trigger";
				qcom,id = <2>;
				qcom,ires-ua = <12500>;
			};

			pm8550_torch3: qcom,torch_3 {
				label = "torch";
				qcom,led-name = "led:torch_3";
				qcom,max-current-ma = <500>;
				qcom,default-led-trigger = "torch3_trigger";
				qcom,id = <3>;
				qcom,ires-ua = <12500>;
			};

			pm8550_switch0: qcom,led_switch_0 {
				label = "switch";
				qcom,led-name = "led:switch_0";
				qcom,default-led-trigger = "switch0_trigger";
			};

			pm8550_switch1: qcom,led_switch_1 {
				label = "switch";
				qcom,led-name = "led:switch_1";
				qcom,default-led-trigger = "switch1_trigger";
			};

			pm8550_switch2: qcom,led_switch_2 {
				label = "switch";
				qcom,led-name = "led:switch_2";
				qcom,default-led-trigger = "switch2_trigger";
			};
		};
	};
};

&thermal_zones {
	pm8550_temp_alarm: pm8550_tz {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm8550_tz>;

		trips {
			pm8550_trip0: trip0 {
				temperature = <95000>;
				hysteresis = <0>;
				type = "passive";
			};

			pm8550_trip1: trip1 {
				temperature = <115000>;
				hysteresis = <0>;
				type = "hot";
			};

			pm8550_trip2: trip2 {
				temperature = <145000>;
				hysteresis = <0>;
				type = "critical";
			};
		};
	};

	pm8550-bcl-lvl0 {
		polling-delay-passive = <50>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm8550_bcl 5>;

		trips {
			bcl_lvl0: bcl-lvl0 {
				temperature = <1>;
				hysteresis = <1>;
				type = "passive";
			};
		};
	};

	pm8550-bcl-lvl1 {
		polling-delay-passive = <50>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm8550_bcl 6>;

		trips {
			bcl_lvl1: bcl-lvl1 {
				temperature = <1>;
				hysteresis = <1>;
				type = "passive";
			};
		};
	};

	pm8550-bcl-lvl2 {
		polling-delay-passive = <50>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm8550_bcl 7>;

		trips {
			bcl_lvl2: bcl-lvl2 {
				temperature = <1>;
				hysteresis = <1>;
				type = "passive";
			};
		};
	};
};