6f18ce8026
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
62 lines
2.1 KiB
Plaintext
62 lines
2.1 KiB
Plaintext
NVIDIA Tegra114 SPI controller.
|
|
|
|
Required properties:
|
|
- compatible : For Tegra114, must contain "nvidia,tegra114-spi".
|
|
Otherwise, must contain '"nvidia,<chip>-spi", "nvidia,tegra114-spi"' where
|
|
<chip> is tegra124, tegra132, or tegra210.
|
|
- reg: Should contain SPI registers location and length.
|
|
- interrupts: Should contain SPI interrupts.
|
|
- clock-names : Must include the following entries:
|
|
- spi
|
|
- resets : Must contain an entry for each entry in reset-names.
|
|
See ../reset/reset.txt for details.
|
|
- reset-names : Must include the following entries:
|
|
- spi
|
|
- dmas : Must contain an entry for each entry in clock-names.
|
|
See ../dma/dma.txt for details.
|
|
- dma-names : Must include the following entries:
|
|
- rx
|
|
- tx
|
|
- clocks : Must contain an entry for each entry in clock-names.
|
|
See ../clocks/clock-bindings.txt for details.
|
|
|
|
Recommended properties:
|
|
- spi-max-frequency: Definition as per
|
|
Documentation/devicetree/bindings/spi/spi-bus.txt
|
|
Optional properties:
|
|
- nvidia,tx-clk-tap-delay: Delays the clock going out to the external device
|
|
with this tap value. This property is used to tune the outgoing data from
|
|
Tegra SPI master with respect to outgoing Tegra SPI master clock.
|
|
Tap values vary based on the platform design trace lengths from Tegra SPI
|
|
to corresponding slave devices. Valid tap values are from 0 thru 63.
|
|
- nvidia,rx-clk-tap-delay: Delays the clock coming in from the external device
|
|
with this tap value. This property is used to adjust the Tegra SPI master
|
|
clock with respect to the data from the SPI slave device.
|
|
Tap values vary based on the platform design trace lengths from Tegra SPI
|
|
to corresponding slave devices. Valid tap values are from 0 thru 63.
|
|
|
|
Example:
|
|
|
|
spi@7000d600 {
|
|
compatible = "nvidia,tegra114-spi";
|
|
reg = <0x7000d600 0x200>;
|
|
interrupts = <0 82 0x04>;
|
|
spi-max-frequency = <25000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car 44>;
|
|
clock-names = "spi";
|
|
resets = <&tegra_car 44>;
|
|
reset-names = "spi";
|
|
dmas = <&apbdma 16>, <&apbdma 16>;
|
|
dma-names = "rx", "tx";
|
|
<spi-client>@<bus_num> {
|
|
...
|
|
...
|
|
nvidia,rx-clk-tap-delay = <0>;
|
|
nvidia,tx-clk-tap-delay = <16>;
|
|
...
|
|
};
|
|
|
|
};
|