6f18ce8026
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
35 lines
995 B
Plaintext
35 lines
995 B
Plaintext
* STMicroelectronics SAS. ST33ZP24 TPM SoC
|
|
|
|
Required properties:
|
|
- compatible: Should be "st,st33zp24-i2c".
|
|
- clock-frequency: I²C work frequency.
|
|
- reg: address on the bus
|
|
|
|
Optional ST33ZP24 Properties:
|
|
- interrupts: GPIO interrupt to which the chip is connected
|
|
- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
|
|
If set, power must be present when the platform is going into sleep/hibernate mode.
|
|
|
|
Optional SoC Specific Properties:
|
|
- pinctrl-names: Contains only one value - "default".
|
|
- pintctrl-0: Specifies the pin control groups used for this controller.
|
|
|
|
Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2):
|
|
|
|
&i2c2 {
|
|
|
|
|
|
st33zp24: st33zp24@13 {
|
|
|
|
compatible = "st,st33zp24-i2c";
|
|
|
|
reg = <0x13>;
|
|
clock-frequency = <400000>;
|
|
|
|
interrupt-parent = <&gpio5>;
|
|
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|