6f18ce8026
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
30 lines
1.1 KiB
Plaintext
30 lines
1.1 KiB
Plaintext
Device tree binding documentation for Motorola Mapphone MDM6600 USB PHY
|
|
|
|
Required properties:
|
|
- compatible Must be "motorola,mapphone-mdm6600"
|
|
- enable-gpios GPIO to enable the USB PHY
|
|
- power-gpios GPIO to power on the device
|
|
- reset-gpios GPIO to reset the device
|
|
- motorola,mode-gpios Two GPIOs to configure MDM6600 USB start-up mode for
|
|
normal mode versus USB flashing mode
|
|
- motorola,cmd-gpios Three GPIOs to control the power state of the MDM6600
|
|
- motorola,status-gpios Three GPIOs to read the power state of the MDM6600
|
|
|
|
Example:
|
|
|
|
usb-phy {
|
|
compatible = "motorola,mapphone-mdm6600";
|
|
enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
|
|
power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
|
|
motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
|
|
<&gpio5 21 GPIO_ACTIVE_HIGH>;
|
|
motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
|
|
<&gpio4 8 GPIO_ACTIVE_HIGH>,
|
|
<&gpio5 14 GPIO_ACTIVE_HIGH>;
|
|
motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
|
|
<&gpio2 21 GPIO_ACTIVE_HIGH>,
|
|
<&gpio2 23 GPIO_ACTIVE_HIGH>;
|
|
#phy-cells = <0>;
|
|
};
|